Precision Instrumentation Amplifier AD8221 CONNECTION DIAGRAM Easy to use Available in space-saving MSOP Gain set with 1 external resistor (gain range 1 to 1000) Wide power supply range: 2.3 V to 18 V Temperature range for specified performance: -40C to +85C Operational up to 125C 1 Excellent AC specifications 80 dB minimum CMRR to 10 kHz (G = 1) 825 kHz, -3 dB bandwidth (G = 1) 2 V/s slew rate Low noise 8 nV/Hz, @ 1 kHz, maximum input voltage noise 0.25 V p-p input noise (0.1 Hz to 10 Hz) High accuracy dc performance (AD8221BR) 90 dB minimum CMRR (G = 1) 25 V maximum input offset voltage 0.3 V/C maximum input offset drift 0.4 nA maximum input bias current -IN 1 8 +VS RG 2 7 VOUT RG 3 6 REF +IN 4 AD8221 5 -VS TOP VIEW 03149-001 FEATURES Figure 1. 120 110 AD8221 CMRR (dB) 100 90 COMPETITOR 1 80 70 60 COMPETITOR 2 40 10 APPLICATIONS Weigh scales Industrial process controls Bridge amplifiers Precision data acquisition systems Medical instrumentation Strain gages Transducer interfaces GENERAL DESCRIPTION The AD8221 is a gain programmable, high performance instrumentation amplifier that delivers the industry's highest CMRR over frequency in its class. The CMRR of instrumentation amplifiers on the market today falls off at 200 Hz. In contrast, the AD8221 maintains a minimum CMRR of 80 dB to 10 kHz for all grades at G = 1. High CMRR over frequency allows the AD8221 to reject wideband interference and line harmonics, greatly simplifying filter requirements. Possible applications include precision data acquisition, biomedical analysis, and aerospace instrumentation. 100 1k 10k 100k FREQUENCY (Hz) 03149-002 50 Figure 2. Typical CMRR vs. Frequency for G = 1 Low voltage offset, low offset drift, low gain drift, high gain accuracy, and high CMRR make this part an excellent choice in applications that demand the best dc performance possible, such as bridge signal conditioning. Programmable gain affords the user design flexibility. A single resistor sets the gain from 1 to 1000. The AD8221 operates on both single and dual supplies and is well suited for applications where 10 V input voltages are encountered. The AD8221 is available in a low cost 8-lead SOIC and 8-lead MSOP, both of which offer the industry's best performance. The MSOP requires half the board space of the SOIC, making it ideal for multichannel or space-constrained applications. Performance is specified over the entire industrial temperature range of -40C to +85C for all grades. Furthermore, the AD8221 is operational from -40C to +125C1. 1 See Typical Performance Characteristics for expected operation from 85C to 125C. Rev. C Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. www.analog.com Tel: 781.329.4700 Fax: 781.461.3113 (c)2003-2011 Analog Devices, Inc. All rights reserved. AD8221 TABLE OF CONTENTS Features .............................................................................................. 1 Layout .......................................................................................... 18 Applications ....................................................................................... 1 Reference Terminal .................................................................... 19 General Description ......................................................................... 1 Power Supply Regulation and Bypassing ................................ 19 Connection Diagram ....................................................................... 1 Input Bias Current Return Path ............................................... 19 Revision History ............................................................................... 2 Input Protection ......................................................................... 19 Specifications..................................................................................... 3 RF Interference ........................................................................... 20 Absolute Maximum Ratings ............................................................ 8 Precision Strain Gage ................................................................. 20 Thermal Characteristics .............................................................. 8 ESD Caution .................................................................................. 8 Conditioning 10 V Signals for a +5 V Differential Input ADC ............................................................................................. 20 Pin Configuration and Function Descriptions ............................. 9 AC-Coupled Instrumentation Amplifier ................................ 21 Typical Performance Characteristics ........................................... 10 Die Information .............................................................................. 22 Theory of Operation ...................................................................... 17 Outline Dimensions ....................................................................... 23 Gain Selection ............................................................................. 18 Ordering Guide .......................................................................... 24 REVISION HISTORY 3/11--Rev. B to Rev. C Added Pin Configuration and Function Descriptions Section .. 9 Added Die Information Section ................................................... 22 Updated Outline Dimensions ....................................................... 23 Changes to Ordering Guide .......................................................... 24 9/07--Rev. A to Rev. B Changes to Features.......................................................................... 1 Changes to Table 1 Layout ............................................................... 3 Changes to Table 2 Layout ............................................................... 5 Changes to Figure 15 ...................................................................... 11 Changes to Figures 32 .................................................................... 13 Changes to Figure 33, Figure 34, and Figure 35 ......................... 14 Updated Outline Dimensions ....................................................... 21 Changes to Ordering Guide .......................................................... 22 11/03--Rev. 0 to Rev. A Changes to Features.......................................................................... 1 Changes to Specifications Section .................................................. 4 Changes to Theory of Operation Section .................................... 13 Changes to Gain Selection Section............................................... 14 10/03--Revision 0: Initial Version Rev. C | Page 2 of 24 AD8221 SPECIFICATIONS VS = 15 V, VREF = 0 V, TA = 25C, G = 1, RL = 2 k, unless otherwise noted. Table 1. Parameter COMMON-MODE REJECTION RATIO CMRR DC to 60 Hz with 1 k Source Imbalance G=1 G = 10 G = 100 G = 1000 CMRR at 10 kHz G=1 G = 10 G = 100 G = 1000 NOISE Voltage Noise, 1 kHz Input Voltage Noise, eNI Output Voltage Noise, eNO RTI G=1 G = 10 G = 100 to 1000 Current Noise VOLTAGE OFFSET1 Input Offset, VOSI Over Temperature Average TC Output Offset, VOSO Over Temperature Average TC Offset RTI vs. Supply (PSR) G=1 G = 10 G = 100 G = 1000 INPUT CURRENT Input Bias Current Over Temperature Average TC Input Offset Current Over Temperature Average TC REFERENCE INPUT RIN IIN Voltage Range Gain to Output Conditions Min AR Grade Typ Max Min BR Grade Typ Max Unit VCM = -10 V to +10 V 80 100 120 130 90 110 130 140 dB dB dB dB 80 90 100 100 80 100 110 110 dB dB dB dB VCM = -10 V to +10 V RTI noise = eNI2 + (eNO/G)2 VIN+, VIN-, VREF = 0 8 75 8 75 nV/Hz nV/Hz f = 0.1 Hz to 10 Hz 2 0.5 0.25 40 6 f = 1 kHz f = 0.1 Hz to 10 Hz VS = 5 V to 15 V T = -40C to +85C 2 0.5 0.25 40 6 60 86 0.4 300 0.66 6 VS = 5 V to 15 V T = -40C to +85C V p-p V p-p V p-p fA/Hz pA p-p 25 45 0.3 200 0.45 5 V V V/C V mV V/C VS = 2.3 V to 18 V 90 110 124 130 110 120 130 140 0.5 T = -40C to +85C 1 0.2 T = -40C to +85C VIN+, VIN-, VREF = 0 -VS 94 114 130 140 1.5 2.0 110 130 140 150 0.2 1 0.1 0.6 0.8 1 1 20 50 20 50 60 +VS 1 0.0001 Rev. C | Page 3 of 24 -VS dB dB dB dB 0.4 1 0.4 0.6 60 +VS 1 0.0001 nA nA pA/C nA nA pA/C k A V V/V AD8221 Parameter POWER SUPPLY Operating Range Quiescent Current Over Temperature DYNAMIC RESPONSE Small Signal -3 dB Bandwidth G=1 G = 10 G = 100 G = 1000 Settling Time 0.01% G = 1 to 100 G = 1000 Settling Time 0.001% G = 1 to 100 G = 1000 Slew Rate GAIN Gain Range Gain Error G=1 G = 10 G = 100 G = 1000 Gain Nonlinearity G = 1 to 10 G = 100 G = 1000 G = 1 to 100 Gain vs. Temperature G=1 G > 12 INPUT Input Impedance Differential Common Mode Input Operating Voltage Range 3 Over Temperature Input Operating Voltage Range Over Temperature OUTPUT Output Swing Over Temperature Output Swing Over Temperature Short-Circuit Current Conditions Min VS = 2.3 V to 18 V 2.3 AR Grade Typ Max 0.9 1 T = -40C to +85C 18 1 1.2 Min BR Grade Typ Max 2.3 0.9 1 18 1 1.2 Unit V mA mA 825 562 100 14.7 825 562 100 14.7 kHz kHz kHz kHz 10 80 10 80 s s 13 110 2 2.5 13 110 2 2.5 s s V/s V/s 10 V step 10 V step G=1 G = 5 to 100 G = 1 + (49.4 k/RG) 1.5 2 1 1.5 2 1000 1 1000 V/V 0.02 0.15 0.15 0.15 % % % % VOUT 10 V 0.03 0.3 0.3 0.3 VOUT = -10 V to +10 V RL = 10 k RL = 10 k RL = 10 k RL = 2 k 3 5 10 10 10 15 40 95 3 5 10 10 10 15 40 95 ppm ppm ppm ppm 3 10 -50 2 5 -50 ppm/C ppm/C 100||2 100||2 VS = 2.3 V to 5 V T = -40C to +85C VS = 5 V to 18 V T =-40C to +85C RL = 10 k VS = 2.3 V to 5 V T = -40C to +85C VS = 5 V to 18 V T = -40C to +85C 100||2 100||2 -VS + 1.9 -VS + 2.0 -VS + 1.9 -VS + 2.0 +VS - 1.1 +VS - 1.2 +VS - 1.2 +VS - 1.2 -VS + 1.9 -VS + 2.0 -VS + 1.9 -VS + 2.0 +VS - 1.1 +VS - 1.2 +VS - 1.2 +VS - 1.2 -VS + 1.1 -VS + 1.4 -VS + 1.2 -VS + 1.6 +VS - 1.2 +Vs - 1.3 +VS - 1.4 +VS - 1.5 -VS + 1.1 -VS + 1.4 -VS + 1.2 -VS + 1.6 +VS - 1.2 +VS - 1.3 +VS - 1.4 +VS - 1.5 18 Rev. C | Page 4 of 24 18 G||pF G||pF V V V V V V V V mA AD8221 Parameter TEMPERATURE RANGE Specified Performance Operating Range 4 Conditions Min AR Grade Typ Max Min BR Grade Typ Max -40 -40 +85 +125 -40 -40 +85 +125 Unit C C 1 Total RTI VOS = (VOSI) + (VOSO/G). Does not include the effects of external resistor RG. One input grounded. G = 1. 4 See Typical Performance Characteristics for expected operation between 85C to 125C. 2 3 Table 2. Parameter COMMON-MODE REJECTION RATIO (CMRR) CMRR DC to 60 Hz with 1 k Source Imbalance G=1 G = 10 G = 100 G = 1000 CMRR at 10 kHz G=1 G = 10 G = 100 G = 1000 Conditions NOISE Voltage Noise, 1 kHz Input Voltage Noise, eNI Output Voltage Noise, eNO RTI G=1 G = 10 G = 100 to 1000 Current Noise RTI noise = eNI2 + (eNO/G)2 VOLTAGE OFFSET 1 Input Offset, VOSI Over Temperature Average TC Output Offset, VOSO Over Temperature Average TC Offset RTI vs. Supply (PSR) G=1 G = 10 G = 100 G = 1000 INPUT CURRENT Input Bias Current Over Temperature Average TC Input Offset Current Over Temperature Average TC Min ARM Grade Typ Max Unit VCM = -10 V to +10 V 80 100 120 130 dB dB dB dB 80 90 100 100 dB dB dB dB VCM = -10 V to +10 V VIN+, VIN-, VREF = 0 8 75 nV/Hz nV/Hz f = 0.1 Hz to 10 Hz 2 0.5 0.25 40 6 f = 1 kHz f = 0.1 Hz to 10 Hz VS = 5 V to 15 V T = -40C to +85C V p-p V p-p V p-p fA/Hz pA p-p 70 135 0.9 600 1.00 9 VS = 5 V to 15 V T = -40C to +85C V V V/C V mV V/C VS = 2.3 V to 18 V 90 100 120 120 100 120 140 140 0.5 T = -40C to +85C 3 0.3 T = -40C to +85C 3 Rev. C | Page 5 of 24 dB dB dB dB 2 3 1 1.5 nA nA pA/C nA nA pA/C AD8221 Parameter REFERENCE INPUT RIN IIN Voltage Range Gain to Output POWER SUPPLY Operating Range Quiescent Current Over Temperature DYNAMIC RESPONSE Small Signal -3 dB Bandwidth G=1 G = 10 G = 100 G = 1000 Settling Time 0.01% G = 1 to 100 G = 1000 Settling Time 0.001% G = 1 to 100 G = 1000 Slew Rate GAIN Gain Range Gain Error G=1 G = 10 G = 100 G = 1000 Gain Nonlinearity G = 1 to 10 G = 100 G = 1000 G = 1 to 100 Gain vs. Temperature G=1 G > 12 INPUT Input Impedance Differential Common Mode Input Operating Voltage Range 3 Over Temperature Input Operating Voltage Range Over Temperature OUTPUT Output Swing Over Temperature Output Swing Over Temperature Short-Circuit Current Conditions Min ARM Grade Typ Max 20 50 VIN+, VIN-, VREF = 0 -VS 60 +VS k A V V/V 18 1 1.2 V mA mA 1 0.0001 VS = 2.3 V to 18 V 2.3 0.9 1 T = -40C to +85C Unit 825 562 100 14.7 kHz kHz kHz kHz 10 80 s s 13 110 2 2.5 s s V/s V/s 10 V step 10 V step G=1 G = 5 to 100 G = 1 + (49.4 k/RG) 1.5 2 1 1000 V/V 0.1 0.3 0.3 0.3 % % % % 5 7 10 15 15 20 50 100 ppm ppm ppm ppm 3 10 -50 ppm/C ppm/C VOUT 10 V VOUT = -10 V to +10 V RL = 10 k RL = 10 k RL = 10 k RL = 2 k 100||2 100||2 VS = 2.3 V to 5 V T = -40C to +85C VS = 5 V to 18 V T = -40C to +85C RL = 10 k VS = 2.3 V to 5 V T = -40C to +85C VS = 5 V to 18 V T = -40C to +85C -VS + 1.9 -VS + 2.0 -VS + 1.9 -VS + 2.0 +VS - 1.1 +VS - 1.2 +VS - 1.2 +VS - 1.2 -VS + 1.1 -VS + 1.4 -VS + 1.2 -VS + 1.6 +VS - 1.2 +VS - 1.3 +VS - 1.4 +VS - 1.5 18 Rev. C | Page 6 of 24 G/pF G/pF V V V V V V V V mA AD8221 Parameter TEMPERATURE RANGE Specified Performance Operating Range 4 Conditions 1 Total RTI VOS = (VOSI) + (VOSO/G). Does not include the effects of external resistor RG. One input grounded. G = 1. 4 See Typical Performance Characteristics for expected operation between 85C to 125C. 2 3 Rev. C | Page 7 of 24 Min ARM Grade Typ Max -40 -40 +85 +125 Unit C C AD8221 ABSOLUTE MAXIMUM RATINGS Table 3. Parameter Supply Voltage Internal Power Dissipation Output Short-Circuit Current Input Voltage (Common-Mode) Differential Input Voltage Storage Temperature Range Operating Temperature Range 1 1 Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Rating 18 V 200 mW Indefinite VS VS -65C to +150C -40C to +125C THERMAL CHARACTERISTICS Specification for a device in free air. Temperature range for specified performance is -40C to +85C. See Typical Performance Characteristics for expected operation from 85C to 125C. Table 4. Package 8-Lead SOIC, 4-Layer JEDEC Board 8-Lead MSOP, 4-Layer JEDEC Board ESD CAUTION Rev. C | Page 8 of 24 JA 121 135 Unit C/W C/W AD8221 AD8221 8 +VS 2 7 VOUT RG 3 6 REF +IN 4 5 -VS -IN 1 RG TOP VIEW (Not to Scale) 03149-103 PIN CONFIGURATION AND FUNCTION DESCRIPTIONS Figure 3. Pin Configuration Table 5. Pin Function Descriptions Pin No. 1 2 3 4 5 6 7 8 Mnemonic -IN RG RG +IN -VS REF VOUT +VS Description Negative Input Terminal. Gain Setting Terminal. Place resistor across the RG pins to set the gain. G = 1 + (49.4 k/RG). Gain Setting Terminal. Place resistor across the RG pins to set the gain. G = 1 + (49.4 k/RG). Positive Input Terminal. Negative Power Supply Terminal. Reference Voltage Terminal. Drive this terminal with a low impedance voltage source to level-shift the output. Output Terminal. Positive Power Supply Terminal. Rev. C | Page 9 of 24 AD8221 TYPICAL PERFORMANCE CHARACTERISTICS T = 25C, VS = 15 V, RL = 10 k, unless otherwise noted. 1600 3500 1400 3000 1200 2500 UNITS UNITS 1000 800 2000 1500 600 1000 400 -100 -50 0 50 100 150 CMR (V/V) 0 -0.9 03149-003 0 -150 0.3 0.6 0.9 15 1800 1500 1200 900 600 -40 -20 0 20 40 60 INPUT OFFSET VOLTAGE (V) VS = 15V 5 0 VS = 5V -5 -10 -15 -15 -10 -5 0 5 10 15 OUTPUT VOLTAGE (V) Figure 5. Typical Distribution of Input Offset Voltage Figure 8. Input Common-Mode Range vs. Output Voltage, G = 1 3000 INPUT COMMON-MODE VOLTAGE (V) 15 2500 2000 1500 1000 -1.0 -0.5 0 0.5 1.0 INPUT BIAS CURRENT (nA) 1.5 VS = 15V 5 0 VS = 5V -5 -10 -15 -15 03149-005 500 10 -10 -5 0 5 OUTPUT VOLTAGE (V) Figure 6. Typical Distribution of Input Bias Current 10 15 03149-008 0 -60 03149-004 300 10 03149-007 INPUT COMMON-MODE VOLTAGE (V) 2100 UNITS 0 Figure 7. Typical Distribution of Input Offset Current 2400 UNITS -0.3 INPUT OFFSET CURRENT (nA) Figure 4. Typical Distribution for CMR (G = 1) 0 -1.5 -0.6 03149-006 500 200 Figure 9. Input Common-Mode Range vs. Output Voltage, G = 100 Rev. C | Page 10 of 24 AD8221 0.80 180 0.75 160 0.70 140 0.60 VS = 5V 0.55 120 GAIN = 10 100 GAIN = 1 GAIN = 1000 80 0.50 60 0.45 40 0.40 -15 -10 -5 0 5 10 15 COMMON-MODE VOLTAGE (V) 20 0.1 1 10 100 1k 10k 100k 1M FREQUENCY (Hz) Figure 10. IBIAS vs. CMV Figure 13. Positive PSRR vs. Frequency, RTI (G = 1 to 1000) 2.00 180 1.75 160 1.50 140 1.25 1.00 0.75 GAIN = 100 120 GAIN = 10 100 GAIN = 1 80 0.50 60 0.25 40 0 0.01 0.1 1 10 WARM-UP TIME (min) 20 0.1 1 10 100 1k 10k 100k 1M FREQUENCY (Hz) Figure 11. Change in Input Offset Voltage vs. Warm-Up Time 03149-013 NEGATIVE PSRR (dB) GAIN = 1000 03149-010 CHANGE IN INPUT OFFSET VOLTAGE (V) GAIN = 100 03149-012 POSITIVE PSRR (dB) VS = 15V 0.65 03149-009 INPUT BIAS CURRENT (nA) GAIN = 1000 Figure 14. Negative PSRR vs. Frequency, RTI (G = 1 to 1000) 5 100k VS = 15V TOTAL DRIFT 25C - 85C RTI (V) 4 2 1 INPUT OFFSET CURRENT INPUT BIAS CURRENT -1 -2 -3 10k BEST AVAILABLE FET INPUT IN-AMP GAIN = 1 BEST AVAILABLE FET INPUT IN-AMP GAIN = 1000 1k AD8221 GAIN = 1 100 -4 -5 -40 AD8221 GAIN = 1000 -20 0 20 40 60 80 100 120 140 TEMPERATURE (C) 10 10 100 1k 10k 100k 1M SOURCE RESISTANCE () Figure 12. Input Bias Current and Offset Current vs. Temperature Figure 15. Total Drift vs. Source Resistance Rev. C | Page 11 of 24 10M 03149-014 0 03149-011 INPUT CURRENT (nA) 3 AD8221 100 70 GAIN = 1000 80 60 60 50 GAIN = 100 40 CMR (V/V) 40 GAIN = 10 20 10 GAIN = 1 0 20 0 -20 -40 -60 -10 -80 -20 1k 10k 100k 1M 10M FREQUENCY (Hz) -100 -40 03149-015 -30 100 -20 0 20 40 60 80 100 120 140 TEMPERATURE (C) Figure 16. Gain vs. Frequency 03149-018 GAIN (dB) 30 Figure 19. CMR vs. Temperature 160 -0 +VS GAIN = 1000 -0.4 INPUT VOLTAGE LIMIT (V) REFERRED TO SUPPLY VOLTAGES 140 GAIN = 100 CMRR (dB) 120 GAIN = 10 100 GAIN = 1 80 60 -0.8 -1.2 -1.6 -2.0 -2.4 +2.4 +2.0 +1.6 +1.2 +0.8 100 1k 10k 100k 1M FREQUENCY (Hz) +VS GAIN = 1000 OUTPUT VOLTAGE SWING (V) REFERRED TO SUPPLY VOLTAGES GAIN = 1 80 60 15 40 0.1 1 20 -0 -0.8 RL = 10k -1.2 RL = 2k -1.6 -2.0 +2.0 +1.6 RL = 2k +1.2 +0.8 RL = 10k +0.4 10 100 1k 10k 100k 1M FREQUENCY (Hz) 03149-017 CMRR (dB) 100 10 -0.4 GAIN = 100 GAIN = 10 5 Figure 20. Input Voltage Limit vs. Supply Voltage, G = 1 160 120 0 SUPPLY VOLTAGE (V) Figure 17. CMRR vs. Frequency, RTI 140 +0 03149-019 10 -VS -VS +0 0 5 10 15 SUPPLY VOLTAGE (V) Figure 18. CMRR vs. Frequency, RTI, 1 k Source Imbalance Figure 21. Output Voltage Swing vs. Supply Voltage, G = 1 Rev. C | Page 12 of 24 20 03149-020 1 03149-016 +0.4 40 0.1 AD8221 30 VS = 15V 10 0 1 10 100 1k 10k LOAD RESISTANCE () -10 -8 -6 -4 -2 0 2 4 OUTPUT VOLTAGE (V) 6 10 Figure 25. Gain Nonlinearity, G = 100, RL = 10 k Figure 22. Output Voltage Swing vs. Load Resistance +VS -0 VS = 15V -1 SOURCING -2 ERROR (100ppm/DIV) OUTPUT VOLTAGE SWING (V) REFERRED TO SUPPLY VOLTAGES 8 03149-024 ERROR (10ppm/DIV) 20 03149-021 OUTPUT VOLTAGE SWING (V p-p) VS = 15V -3 +3 +2 SINKING 0 1 2 3 4 5 6 7 8 9 10 11 12 OUTPUT CURRENT (mA) -10 03149-022 -VS +0 Figure 23. Output Voltage Swing vs. Output Current, G = 1 -8 -6 -4 -2 0 2 4 OUTPUT VOLTAGE (V) 6 8 10 03149-025 +1 Figure 26. Gain Nonlinearity, G = 1000, RL = 10 k 1k ERROR (1ppm/DIV) VOLTAGE NOISE RTI (nV/ Hz) VS = 15V GAIN = 1 100 GAIN = 10 GAIN = 100 10 GAIN = 1000 -8 -6 -4 -2 0 2 4 OUTPUT VOLTAGE (V) 6 8 Figure 24. Gain Nonlinearity, G = 1, RL = 10 k 10 1 03149-023 -10 1 10 100 1k FREQUENCY (Hz) 10k 100k 03149-026 GAIN = 1000 BW LIMIT Figure 27. Voltage Noise Spectral Density vs. Frequency (G = 1 to 1000) Rev. C | Page 13 of 24 1s/DIV 5pA/DIV Figure 28. 0.1 Hz to 10 Hz RTI Voltage Noise (G = 1) 03149-030 2V/DIV 03149-027 AD8221 1s/DIV Figure 31. 0.1 Hz to 10 Hz Current Noise 30 VS = 15V OUTPUT VOLTAGE (V p-p) 25 20 GAIN = 1 GAIN = 10, 100, 1000 15 10 1s/DIV 0 1k 10k 100k 1M FREQUENCY (Hz) Figure 29. 0.1 Hz to 10 Hz RTI Voltage Noise (G = 1000) 03149-031 0.1V/DIV 03149-028 5 Figure 32. Large Signal Frequency Response 5V/DIV 100 10 1 10 100 1k 10k FREQUENCY (Hz) Figure 30. Current Noise Spectral Density vs. Frequency 7.9s TO 0.01% 8.5s TO 0.001% 20s/DIV 03149-032 0.002%/DIV 03149-029 CURRENT NOISE (fA/ Hz) 1k Figure 33. Large Signal Pulse Response and Settling Time (G = 1), 0.002%/DIV Rev. C | Page 14 of 24 AD8221 5V/DIV 0.002%/DIV 4.9s TO 0.01% 5.6s TO 0.001% 20s/DIV 4s/DIV Figure 34. Large Signal Pulse Response and Settling Time (G = 10), 0.002%/DIV 03149-036 03149-033 20mV/DIV Figure 37. Small Signal Response, G = 1, RL = 2 k, CL = 100 pF 5V/DIV 0.002%/DIV 10.3s TO 0.01% 13.4s TO 0.001% 20s/DIV 4s/DIV Figure 35. Large Signal Pulse Response and Settling Time (G = 100), 0.002%/DIV 03149-037 03149-034 20mV/DIV Figure 38. Small Signal Response, G = 10, RL = 2 k, CL = 100 pF 5V/DIV 0.002%/DIV 83s TO 0.01% 112s TO 0.001% 10s/DIV Figure 36. Large Signal Pulse Response and Settling Time (G = 1000), 0.002%/DIV Rev. C | Page 15 of 24 03149-038 200s/DIV 03149-035 20mV/DIV Figure 39. Small Signal Response, G = 100, RL = 2 k, CL = 100 pF AD8221 SETTLING TIME (s) 1000 2 100 SETTLED TO 0.001% 10 03149-039 100s/DIV 1 1 Figure 42. Settling Time vs. Gain for a 10 V Step 10 SETTLED TO 0.001% SETTLED TO 0.01% 5 5 10 15 OUTPUT VOLTAGE STEP SIZE (V) 20 03149-040 SETTLING TIME (s) 15 0 100 GAIN Figure 40. Small Signal Response, G = 1000, RL = 2 k, CL = 100 pF 0 10 Figure 41. Settling Time vs. Step Size (G = 1) Rev. C | Page 16 of 24 1000 03149-041 SETTLED TO 0.01% 20mV/DIV AD8221 THEORY OF OPERATION VB I I A1 IB COMPENSATION A2 IB COMPENSATION 10k C1 C2 +VS 10k OUTPUT A3 10k +VS -IN +VS 400 Q1 R2 +VS R1 24.7k +VS +VS 24.7k 400 Q2 +IN -VS REF 10k RG -VS 03149-042 -VS -VS -VS -VS Figure 43. Simplified Schematic Using superbeta input transistors and an IB compensation scheme, the AD8221 offers extremely high input impedance, low IB, low IB drift, low IOS, low input bias current noise, and extremely low voltage noise of 8 nV/Hz. Because the input amplifiers employ a current feedback architecture, the gain-bandwidth product of the AD8221 increases with gain, resulting in a system that does not suffer from the expected bandwidth loss of voltage feedback architectures at higher gains. To maintain precision even at low input levels, special attention was given to the design and layout of the AD8221, resulting in an in-amp whose performance satisfies the most demanding applications. A unique pinout enables the AD8221 to meet a CMRR specification of 80 dB at 10 kHz (G = 1) and 110 dB at 1 kHz (G = 1000). The balanced pinout, shown in Figure 44, reduces the parasitics that had, in the past, adversely affected CMRR performance. In addition, the new pinout simplifies board layout because associated traces are grouped together. For example, the gain setting resistor pins are adjacent to the inputs, and the reference pin is next to the output. The transfer function of the AD8221 is G = 1+ 49.4 k RG -IN 1 8 +VS RG 2 7 VOUT RG 3 6 REF +IN 4 5 -VS AD8221 TOP VIEW Users can easily and accurately set the gain using a single standard resistor. Figure 44. Pinout Diagram Rev. C | Page 17 of 24 03149-043 The AD8221 is a monolithic instrumentation amplifier based on the classic 3-op amp topology. Input transistors Q1 and Q2 are biased at a fixed current so that any differential input signal forces the output voltages of A1 and A2 to change accordingly. A signal applied to the input creates a current through RG, R1, and R2, such that the outputs of A1 and A2 deliver the correct voltage. Topologically, Q1, A1, R1 and Q2, A2, R2 can be viewed as precision current feedback amplifiers. The amplified differential and common-mode signals are applied to a difference amplifier that rejects the common-mode voltage but amplifies the differential voltage. The difference amplifier employs innovations that result in low output offset voltage as well as low output offset voltage drift. Laser-trimmed resistors allow for a highly accurate in-amp with gain error typically less than 20 ppm and CMRR that exceeds 90 dB (G = 1). AD8221 GAIN SELECTION Grounding Placing a resistor across the RG terminals set the gain of AD8221, which can be calculated by referring to Table 6 or by using the gain equation. The output voltage of the AD8221 is developed with respect to the potential on the reference terminal. Care should be taken to tie REF to the appropriate local ground. RG = In mixed-signal environments, low level analog signals need to be isolated from the noisy digital environment. Many ADCs have separate analog and digital ground pins. Although it is convenient to tie both grounds to a single ground plane, the current traveling through the ground wires and PC board may cause hundreds of millivolts of error. Therefore, separate analog and digital ground returns should be used to minimize the current flow from sensitive points to the system ground. An example layout is shown in Figure 45 and Figure 46. 49.4 k G -1 Table 6. Gains Achieved Using 1% Resistors 1% Standard Table Value of RG () 49.9 k 12.4 k 5.49 k 2.61 k 1.00 k 499 249 100 49.9 Calculated Gain 1.990 4.984 9.998 19.93 50.40 100.0 199.4 495.0 991.0 The AD8221 defaults to G = 1 when no gain resistor is used. Gain accuracy is determined by the absolute tolerance of RG. The TC of the external gain resistor increases the gain drift of the instrumentation amplifier. Gain error and gain drift are kept to a minimum when the gain resistor is not used. Careful board layout maximizes system performance. Traces from the gain setting resistor to the RG pins should be kept as short as possible to minimize parasitic inductance. To ensure the most accurate output, the trace from the REF pin should either be connected to the local ground of the AD8221, as shown in Figure 47, or connected to a voltage that is referenced to the local ground of the AD8221. 03149-044 LAYOUT Figure 45. Top Layer of the AD8221-EVAL Common-Mode Rejection A well implemented layout helps to maintain the high CMRR over frequency of the AD8221. Input source impedance and capacitance should be closely matched. In addition, source resistance and capacitance should be placed as close to the inputs as permissible. Rev. C | Page 18 of 24 03149-045 One benefit of the high CMRR over frequency of the AD8221 is that it has greater immunity to disturbances, such as line noise and its associated harmonics, than do typical instrumentation amplifiers. Typically, these amplifiers have CMRR fall-off at 200 Hz; common-mode filters are often used to compensate for this shortcoming. The AD8221 is able to reject CMRR over a greater frequency range, reducing the need for filtering. Figure 46. Bottom Layer of the AD8221-EVAL AD8221 REFERENCE TERMINAL +VS As shown in Figure 43, the reference terminal, REF, is at one end of a 10 k resistor. The output of the instrumentation amplifier is referenced to the voltage on the REF terminal; this is useful when the output signal needs to be offset to a precise midsupply level. For example, a voltage source can be tied to the REF pin to level-shift the output so that the AD8221 can interface with an ADC. The allowable reference voltage range is a function of the gain, input, and supply voltage. The REF pin should not exceed either +VS or -VS by more than 0.5 V. AD8221 REF -VS TRANSFORMER +VS For best performance, source impedance to the REF terminal should be kept low, because parasitic resistance can adversely affect CMRR and gain accuracy. AD8221 POWER SUPPLY REGULATION AND BYPASSING REF A stable dc voltage should be used to power the instrumentation amplifier. Noise on the supply pins can adversely affect performance. Bypass capacitors should be used to decouple the amplifier. -VS THERMOCOUPLE A 0.1 F capacitor should be placed close to each supply pin. As shown in Figure 47, a 10 F tantalum capacitor can be used further away from the part. In most cases, it can be shared by other precision integrated circuits. +VS C R 1 fHIGH-PASS = 2RC +VS AD8221 C R 10F -VS +IN CAPACITOR COUPLED Figure 48. Creating an IBIAS Path VOUT AD8221 INPUT PROTECTION LOAD 0.1F 10F -VS 03149-046 REF -IN 03149-047 0.1F REF Figure 47. Supply Decoupling, REF, and Output Referred to Local Ground INPUT BIAS CURRENT RETURN PATH The input bias current of the AD8221 must have a return path to common. When the source, such as a thermocouple, cannot provide a return current path, one should be created, as shown in Figure 48. All terminals of the AD8221 are protected against ESD, 1 kV Human Body Model. In addition, the input structure allows for dc overload conditions below the negative supply, -VS. The internal 400 resistors limit current in the event of a negative fault condition. However, in the case of a dc overload voltage above the positive supply, +VS, a large current flows directly through the ESD diode to the positive rail. Therefore, an external resistor should be used in series with the input to limit current for voltages above +Vs. In either scenario, the AD8221 can safely handle a continuous 6 mA current, I = VIN/REXT for positive overvoltage and I = VIN/(400 + REXT) for negative overvoltage. For applications where the AD8221 encounters extreme overload voltages, as in cardiac defibrillators, external series resistors, and low leakage diode clamps, such as BAV199Ls, FJH1100s, or SP720s should be used. Rev. C | Page 19 of 24 AD8221 RF INTERFERENCE CD affects the difference signal, and CC affects the commonmode signal. Values of R and CC should be chosen to minimize RFI. Mismatch between the R x CC at the positive input and the R x CC at the negative input degrades the CMRR of the AD8221. By using a value of CD one magnitude larger than CC, the effect of the mismatch is reduced, and therefore, performance is improved. RF rectification is often a problem when amplifiers are used in applications where there are strong RF signals. The disturbance can appear as a small dc offset voltage. High frequency signals can be filtered with a low-pass RC network placed at the input of the instrumentation amplifier, as shown in Figure 49. The filter limits the input signal bandwidth according to the following relationship: FilterFreqDiff = 1 2R(2CD + CC ) FilterFreqCM = 1 2RCC PRECISION STRAIN GAGE The low offset and high CMRR over frequency of the AD8221 make it an excellent candidate for bridge measurements. As shown in Figure 50, the bridge can be directly connected to the inputs of the amplifier. +5V where CD 10CC. 10F 0.1F +15V +IN 350 CC 350 10F 350 1nF R -IN +IN + AD8221 R - +2.5V 4.02k CD 10nF R1 499 VOUT AD8221 R Figure 50. Precision Strain Gage REF CONDITIONING 10 V SIGNALS FOR A +5 V DIFFERENTIAL INPUT ADC -IN 4.02k 1nF 0.1F 10F There is a need in many applications to condition 10 V signals. However, many of today's ADCs and digital ICs operate on much lower, single-supply voltages. Furthermore, new ADCs have differential inputs because they provide better commonmode rejection, noise immunity, and performance at low supply voltages. Interfacing a 10 V, single-ended instrumentation amplifier to a +5 V, differential ADC can be a challenge. Interfacing the instrumentation amplifier to the ADC requires attenuation and a level shift. A solution is shown in Figure 51. 03149-048 CC -15V Figure 49. RFI Suppression +12V +2.5V +12V 10F R3 1k 0.1F +5V 10nF AD8022 C1 470pF 0.1F +IN +5V R6 27.4 +12V 0.1F 03149-049 350 0.1F (1/2) AVDD DVDD VIN(+) REF R1 10k -12V R5 499 -IN R2 10k 10F 0.1F OP27 R7 27.4 -12V -12V VIN(-) AGND DGND REF1 REF2 0.1F 0.1F 0.1F AD7723 C2 220F +12V AD8022 R4 1k (1/2) 220nF 0.1F -12V 10nF +5V +VIN 10F 0.1F VOUT AD780 GND Figure 51. Interfacing to a Differential Input ADC Rev. C | Page 20 of 24 2.5V 22F 03149-050 AD8221 AD8221 This topology has five benefits. In addition to level-shifting and attenuation, very little noise is contributed to the system. Noise from R1 and R2 is common to both of the inputs of the ADC and is easily rejected. R5 adds a third of the dominant noise and therefore makes a negligible contribution to the noise of the system. The attenuator divides the noise from R3 and R4. Likewise, its noise contribution is negligible. The fourth benefit of this interface circuit is that the acquisition time of the AD8221 is reduced by a factor of 2. With the help of the OP27, the AD8221 only needs to deliver one-half of the full swing; therefore, signals can settle more quickly. Lastly, the AD8022 settles quickly, which is helpful because the shorter the settling time, the more bits that can be resolved when the ADC acquires data. This configuration provides attenuation, a level-shift, and a convenient interface with a differential input ADC while maintaining performance. reduces the referred input noise of the amplifier to 8 nV/Hz. Thus, smaller signals can be measured because the noise floor is lower. DC offsets that would have been gained by 100 are eliminated from the output of the AD8221 by the integrator feedback network. At low frequencies, the OP1177 forces the output of the AD8221 to 0 V. Once a signal exceeds fHIGH-PASS, the AD8221 outputs the amplified input signal. +VS 0.1F +IN R 499 fHIGH-PASS = AD8221 REF -IN 0.1F -VS OP1177 +VS Rev. C | Page 21 of 24 R 15.8k C 1F +VS 0.1F AC-COUPLED INSTRUMENTATION AMPLIFIER Measuring small signals that are in the noise or offset of the amplifier can be a challenge. Figure 52 shows a circuit that can improve the resolution of small ac signals. The large gain 1 2RC 10F -VS 10F 0.1F -VS Figure 52. AC-Coupled Circuit 03149-051 In this topology, an OP27 sets the reference voltage of the AD8221. The output signal of the instrumentation amplifier is taken across the OUT pin and the REF pin. Two 1 k resistors and a 499 resistor attenuate the 10 V signal to +4 V. An optional capacitor, C1, can serve as an antialiasing filter. An AD8022 is used to drive the ADC. AD8221 DIE INFORMATION Die size: 1575 m x 2230 m Die thickness: 381 m To minimize gain errors introduced by the bond wires, use Kelvin connections between the chip and the gain resistor, RG, by connecting Pad 2A and Pad 2B in parallel to one end of RG and Pad 3A and Pad 3B in parallel to the other end of RG. For unity gain applications where RG is not required, Pad 2A and Pad 2B must be bonded together as well as the Pad 3A and Pad 3B. 1 2A 8 2B 3A 7 3B 6 5 LOGO 03149-104 4 Figure 53. Bond Pad Diagram Table 7. Bond Pad Information Pad No. 1 2A 2B 3A 3B 4 5 6 7 8 1 Mnemonic -IN RG RG RG RG +IN -VS REF VOUT +VS Pad Coordinates1 Y (m) +951 +826 +474 +211 -190 -622 -823 -339 +84 +570 X (m) -379 -446 -615 -619 -490 -621 +635 +649 +612 +636 The pad coordinates indicate the center of each pad, referenced to the center of the die. The die orientation is indicated by the logo, as shown in Figure 53. Rev. C | Page 22 of 24 AD8221 OUTLINE DIMENSIONS 3.20 3.00 2.80 8 3.20 3.00 2.80 5.15 4.90 4.65 5 1 4 PIN 1 IDENTIFIER 0.65 BSC 0.95 0.85 0.75 15 MAX 1.10 MAX 0.80 0.55 0.40 0.23 0.09 6 0 0.40 0.25 10-07-2009-B 0.15 0.05 COPLANARITY 0.10 COMPLIANT TO JEDEC STANDARDS MO-187-AA Figure 54. 8-Lead Mini Small Outline Package [MSOP] (RM-8) Dimensions shown in millimeters 5.00 (0.1968) 4.80 (0.1890) 1 5 4 1.27 (0.0500) BSC 0.25 (0.0098) 0.10 (0.0040) COPLANARITY 0.10 SEATING PLANE 6.20 (0.2441) 5.80 (0.2284) 1.75 (0.0688) 1.35 (0.0532) 0.51 (0.0201) 0.31 (0.0122) 0.50 (0.0196) 0.25 (0.0099) 45 8 0 0.25 (0.0098) 0.17 (0.0067) 1.27 (0.0500) 0.40 (0.0157) COMPLIANT TO JEDEC STANDARDS MS-012-AA CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS (IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN. Figure 55. 8-Lead Standard Small Outline Package [SOIC_N] Narrow Body (R-8) Dimensions shown in millimeters and (inches) Rev. C | Page 23 of 24 012407-A 8 4.00 (0.1574) 3.80 (0.1497) AD8221 ORDERING GUIDE Model 1 AD8221AR AD8221AR-REEL AD8221AR-REEL7 AD8221ARZ AD8221ARZ-R7 AD8221ARZ-RL AD8221ARM AD8221ARM-REEL AD8221ARM REEL7 AD8221ARMZ AD8221ARMZ-R7 AD8221ARMZ-RL AD8221BR AD8221BR-REEL AD8221BR-REEL7 AD8221BRZ AD8221BRZ-R7 AD8221BRZ-RL AD8221AC-P7 1 2 Temperature Range for Specified Performance -40C to +85C -40C to +85C -40C to +85C -40C to +85C -40C to +85C -40C to +85C -40C to +85C -40C to +85C -40C to +85C -40C to +85C -40C to +85C -40C to +85C -40C to +85C -40C to +85C -40C to +85C -40C to +85C -40C to +85C -40C to +85C -40C to +85C Operating 2 Temperature Range -40C to +125C -40C to +125C -40C to +125C -40C to +125C -40C to +125C -40C to +125C -40C to +125C -40C to +125C -40C to +125C -40C to +125C -40C to +125C -40C to +125C -40C to +125C -40C to +125C -40C to +125C -40C to +125C -40C to +125C -40C to +125C -40C to +125C Package Description 8-Lead SOIC_N 8-Lead SOIC_N, 13" Tape and Reel 8-Lead SOIC_N, 7" Tape and Reel 8-Lead SOIC_N 8-Lead SOIC_N, 7" Tape and Reel 8-Lead SOIC_N, 13" Tape and Reel 8-Lead MSOP 8-Lead MSOP, 13" Tape and Reel 8-Lead MSOP, 7" Tape and Reel 8-Lead MSOP 8-Lead MSOP, 7" Tape and Reel 8-Lead MSOP, 13" Tape and Reel 8-Lead SOIC_N 8-Lead SOIC_N, 13" Tape and Reel 8-Lead SOIC_N, 7" Tape and Reel 8-Lead SOIC_N 8-Lead SOIC_N, 7" Tape and Reel 8-Lead SOIC_N, 13" Tape and Reel Die Z = RoHS Compliant Part, # denotes RoHS compliant product may be top or bottom marked. See Typical Performance Characteristics for expected operation from 85C to 125C. (c)2003-2011 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. D03149-0-3/11(C) Rev. C | Page 24 of 24 Package Option R-8 R-8 R-8 R-8 R-8 R-8 RM-8 RM-8 RM-8 RM-8 RM-8 RM-8 R-8 R-8 R-8 R-8 R-8 R-8 Branding JLA JLA JLA JLA# JLA# JLA#