Cable
Ø23
40
41
Cable
360°
Cable
Ø21.5
Ø23
57
Cable
Ø21.5
48
2018.7
Overview
RM-W series connectors originally developed by
Hirose offer miniature waterproof connectors to
satisfy the requirements of high-capability in a small
package.
The locking structure adopts a thread coupling style,
showing superior waterproof reliability.
Features
1. Rich variation
In RM-W series, you can select an optimal product
for your application through different kinds of both
plugs and receptacles.
Plugs :
Available in 3 types - straight plug, straight low-
height plug, and right-angled plug.
Receptacles :
Single-body waterproof type is available to satisfy
waterproof requirements in a single connector.
Fixing methods :
Available in 2 types-Jam nut type and screw
tightening type with square flange. The Jam nut
types offer a front or back mount application.
Available numbers of contacts :
2, 3, 4, 8, 10, 12, 15, 20, 40, and 55 contacts in
2 contact plating types: gold or silver.
2. Waterproof structure
When fully mated, the connectors meet the
waterproof requirements of IP67 and IP68.
Single-body waterproof receptacles also meet
the requirements of IP67 and IP68.
*IP67 : Submerged in 1m for 30 minutes.
*IP68 : Submerged in 2m for 14 days.
3. Flexible cable arrangements
The assembly type right-angled plugs permit
exiting of the cable over a 360-degree range in
any direction.
RM-W Series
Flexible cable arrangements
Assembly type (right-angled plug/RM15W)
Assembly type (straight plug/RM15W)
(Low-height plug)
Fig.1
Fig.2
-Original Multi-purpose High-pin-count Miniature
Waterproof Connectors
In cases where the application will demand a high level of reliability, such as automotive,
please contact a company representative for further information.
1
Mar.1.2019Copyright2019HIROSEELECTRICCO.,LTD.AllRightsReserved.
RM-W Series -Original Multi-purpose High-pin-count Miniature Waterproof Connectors
Rating
Voltage rating
600V AC, 840V DC (2 pos.)
500V AC, 700V DC (3, 4, 8 pos.)
350V AC, 490V DC (10 pos.)
350V AC, 490V DC (12 pos.)
Current rating 10A (2, 3, 4 pos.)
5A (8, 10, 12 pos.)
Operating temperature range (Note 1) -25ç to +85ç
Storage temperature range (Note 2) -10ç to +60ç
Item Material Finish Remarks
Body Zinc alloy, brass Chrome plated or nickel plated -------------------
Insulator Diallyl phthalate resin, or PPS ------------------- UL94V-0 (Color : Black)
Contacts Brass, phosphor bronze, or copper alloy Silver plated or gold plated -------------------
Packing SIR (black or red), or NBR (gray) ------------------- -------------------
Characteristic Specification Conditions
1. Contact resistance 2mø max.(2, 3, 4 pos.)
4mø max.(8, 10, 12 pos.) 1A DC
2. Insulation resistance 1,000Mø min 500V DC
3. Withstanding voltage No flashover or insulation breakdown.
1,800V AC/1 minute (2 pos.)
2,000V AC/1 minute (3 pos.)
1,500V AC/1 minute (4, 8 pos.)
1,000V AC/1 minute (10, 12 pos.)
4. Vibration No electrical discontinuity for 10µs max. Frequency : 10 to 55Hz, single amplitude of 0.75mm,
for 3 hours in 3 axis.
5. Shock No electrical discontinuity for 10µs max. Acceleration of 490m/s2, 11ms duration, sine half-wave
waveform, 3 cycles in each of the 3 axis.
6. Durability
(insertion/withdrawal)
4mø max.(2, 3, 4 pos.)
8mø max.(8, 10, 12 pos.) 2,000 cycles
7. Temperature cycle Insulation resistance : 100Mø min.
Temperature : -55ç Room temperature +85ç Room temperature
Time
: 30 10 to 15 30 10 to 15 (Minutes) 5 cycles
8. Humidity
Insulation resistance : 100Mø min.(Dray state)
96 hours at temperature of 40ç and humidity of 90% to 95%.
9.
Water / dust protection
When mated with corresponding connector.
Complete dust protection. No water penetration
when submerged for 48 hours at the depth of 1.8 meter.
Product Specifications (RM15WT size products)
Materials / Finish
Product Number Structure
Refer to the chart below when determining the product specifications from the product number.
Please select from the product numbers listed in this catalog when placing orders.
Note 1 : Includes temperature rise caused by the current flow.
Note 2 : The term “storage” refers to products stored for long period of time prior to mounting and use. Operating temperature range and
humidity range covers non-conducting condition of installed connectors in storage, shipment or during transportation.
Note : Do not mix different contact plating.
Series name : RM-W Number of Contacts
Shell size Contact type
P : Male contact
S : Female contact
Lock type
T : Screw Lock
Connector type
P : Plug
LP : Plug(right angle)
R : Receptacle
Other specifications
A two-digit number is added to indicate
other specifications.
1 5
62
3
47
RM 15 W T P** -
2 P (**)
1234 5 6 7
1
2
Mar.1.2019Copyright2019HIROSEELECTRICCO.,LTD.AllRightsReserved.
RM-W Series -Original Multi-purpose High-pin-count Miniature Waterproof Connectors
Plugs - Straight Long Back Shell
(Representative example)
RM15WTPZA-10S(71)
Note 1 : Cable jacket diameter : Use A ± 0.2mm
Note 2 : When using the self-tightening strain relief verify the cable pull force requirements.
[Specification number] ( *), - *
(71)(81) : Silver plated contacts
(72)(82) : Gold plated contacts
Applicable Strain Reliefs
External cable clamp + internal, self-tightening
Internal, self tightening
JR16WCC-10(72)
JR16WCCA-10(72)
(Representative example)
Part No. HRS No.
No. of contacts
Weight
RM15WTPZA-2P(7*)
109-1734-5 7* 2 43g
RM15WTPZA-3P(72) 109-1602-4 72 3 45g
RM15WTPZA-4P(7*)
109-1735-8 7* 4 44g
RM15WTPZA-8P(7*)
109-1736-0 7* 8 43g
RM15WTPZA-10P(7*)
109-1737-3 7* 10 44g
RM15WTPZA-12P(7*)
109-1738-6 7* 12
Part No. HRS No.
No. of contacts
Weight
RM15WTPZA-2S(7*)
109-1729-5 7* 2 45g
RM15WTPZA-3S(7*)
109-1601-1 7* 3 47g
RM15WTPZA-4S(8*)
109-1730-4 8* 4
45g
RM15WTPZA-8S(7*)
109-1731-7 7* 8
RM15WTPZA-10S(7*)
109-1732-0 7* 10
RM15WTPZA-12S(7*)
109-1733-2 7* 12
Part No. HRS No. A Weight
JR16WCC-4(72) 114-2052-6 72 4
17.5gJR16WCC-6(72) 114-2053-9 72 6
JR16WCC-8(72) 114-2054-1 72 8
Part No. HRS No. A Weight
JR16WCCA-4(72) 114-2076-4 72 4
16gJR16WCCA-6(72) 114-2077-7 72 6
JR16WCCA-8(72) 114-2078-0 72 8
Part No. HRS No. A Weight
JR16WCC-10(72) 114-2055-4 72 10
17.5gJR16WCC-11(72) 114-2154-6 72 11
JR16WCC-12(72) 114-2056-7 72 12
Part No. HRS No. A Weight
JR16WCCA-10(72) 114-2079-2 72 10
16gJR16WCCA-11(72) 114-2155-9 72 11
JR16WCCA-12(72) 114-2080-1 72 12
(Representative example)
M19∞1 M20∞0.75
Wrench opening dimension
of 18mm
Ø15.2
45.3
Ø21.5
2
13
Wrench opening dimension
of 21mm
Ø23
M20∞0.75
17.5 Drive screw(2)
A
Wrench opening dimension
of 21mm
Ø23
M20∞0.75
8
A
3
Mar.1.2019Copyright2019HIROSEELECTRICCO.,LTD.AllRightsReserved.
RM-W Series -Original Multi-purpose High-pin-count Miniature Waterproof Connectors
RM15WTPZ-10S(71)
JR13WCC-10(72)
JR13WCCA-10(72)
Plugs - Straight Short Back Shell
(Representative example)
Applicable Strain Reliefs
External cable clamp + internal, self-tightening
Internal, self tightening
(Representative example)
Part No. HRS No. A Weight
JR13WCC-7(72) 114-2048-9 72 7
17g
JR13WCC-8(72) 114-2049-1 72 8
JR13WCC-9(72) 114-2050-0 72 9
JR13WCC-10(72) 114-2051-3 72 10
Part No. HRS No. A Weight
JR13WCCA-7(72) 114-2072-3 72 7
12g
JR13WCCA-8(72) 114-2073-6 72 8
JR13WCCA-9(72) 114-2074-9 72 9
JR13WCCA-10(72) 114-2075-1 72 10
Part No. HRS No. A Weight
JR13WCC-4(72) 114-2045-0 72 4
17gJR13WCC-5(72) 114-2046-3 72 5
JR13WCC-6(72) 114-2047-6 72 6
Part No. HRS No. A Weight
JR13WCCA-4(72) 114-2069-9 72 4
12gJR13WCCA-5(72) 114-2070-8 72 5
JR13WCCA-6(72) 114-2071-0 72 6
(Representative example)
Note 1 : Cable jacket diameter : Use A ± 0.2mm
Note 2 : When using the self-tightening strain relief verify the cable pull force requirements.
Part No. HRS No.
No. of contacts
Weight
RM15WTPZ-2P(7*) 109-1616-9 7* 2 32g
RM15WTPZ-3P(7*) 109-1622-1 7* 3 34g
RM15WTPZ-4P(7*) 109-1617-1 7* 4 33g
RM15WTPZ-8P(7*) 109-1618-4 7* 8 32g
RM15WTPZ-10P(7*)
109-1619-7 7* 10 33g
RM15WTPZ-12P(7*) 109-1620-6 7* 12
Part No. HRS No.
No. of contacts
Weight
RM15WTPZ-2S(7*) 109-1611-5 7* 2 34g
RM15WTPZ-3S(7*) 109-1621-9 7* 3 36g
RM15WTPZ-4S(8*) 109-1612-8 8* 4
34g
RM15WTPZ-8S(7*) 109-1613-0 7* 8
RM15WTPZ-10S(7*) 109-1614-3 7* 10
RM15WTPZ-12S(7*) 109-1615-6 7* 12
M19∞1 M16∞0.75
Wrench opening dimension
of 18mm
Ø15.2
36.3
Ø21.5
13
2
17
M16∞0.75
Wrench opening dimension
of 17mm
Ø20
A
Drive screw(2)
7.5
M16∞0.75
Wrench opening dimension
of 17mm
Ø20
A
[Specification number] ( *), - *
(71)(81) : Silver plated contacts
(72)(82) : Gold plated contacts
4
Mar.1.2019Copyright2019HIROSEELECTRICCO.,LTD.AllRightsReserved.
RM-W Series -Original Multi-purpose High-pin-count Miniature Waterproof Connectors
M19∞1
M16∞0.75
Wrench opening dimension
of 21.8mm
Set screw(2)
Hexagonal hole
opposite side
1.27mm
(1.27HEX)
Ø15.2
19.15
39.5
Ø23
(Representative example)
[Specification number] (**), -**
(31) : Silver plated contacts
(32) : Gold plated contacts
Part No. HRS No. A Weight
JR13WCC-7(72) 114-2048-9 72 7
17g
JR13WCC-8(72) 114-2049-1 72 8
JR13WCC-9(72) 114-2050-0 72 9
JR13WCC-10(72) 114-2051-3 72 10
Part No. HRS No. A Weight
JR13WCCA-7(72) 114-2072-3 72 7
12g
JR13WCCA-8(72) 114-2073-6 72 8
JR13WCCA-9(72) 114-2074-9 72 9
JR13WCCA-10(72) 114-2075-1 72 10
Plugs - Right Angle
Note 1 : Cable jacket diameter : Use A ± 0.2mm
Note 2 : When using the self-tightening strain relief verify the cable pull force requirements.
Note 1 : Packing material : NBR, body plating : nickel
Note 2 : HRS recommended tool : 1.27mm Hex Wrench
Note 3 : Recommended set screw tightening torque : 0.2 to 0.3N•m.
Applicable Strain Reliefs
External cable clamp + internal, self-tightening
Internal, self tightening
(Representative example)
Part No. HRS No. A Weight
JR13WCC-4(72) 114-2045-0 72 4
17gJR13WCC-5(72) 114-2046-3 72 5
JR13WCC-6(72) 114-2047-6 72 6
Part No. HRS No. A Weight
JR13WCCA-4(72) 114-2069-9 72 4
12gJR13WCCA-5(72) 114-2070-8 72 5
JR13WCCA-6(72) 114-2071-0 72 6
(Representative example)
Part No. HRS No.
No. of contacts
Weight
RM15WTLP-4P(31) 109-1886-3 31 460.6g
RM15WTLP-4S(32) 109-1888-9 32 61.6g
RM15WTLP-8P(31) 109-1887-6 31 861.5g
RM15WTLP-8S(32) 109-1889-1 32 63.2g
Part No. HRS No.
No. of contacts
Weight
RM15WTLP-10P(31) 109-0020-0 31 10 62.1g
RM15WTLP-10S(31) 109-0999-4 31 63.1g
RM15WTLP-12P(31) 109-0997-9 31 12 62.3g
RM15WTLP-12S(31) 109-1911-9 31 64.3g
JR13WCCA-10(72)
RM15WTLP-10S(31)
JR13WCC-10(72)
17
M16∞0.75
Wrench opening dimension
of 17mm
Ø20
A
Drive screw(2)
7.5
M16∞0.75
Wrench opening dimension
of 17mm
Ø20
A
5
Mar.1.2019Copyright2019HIROSEELECTRICCO.,LTD.AllRightsReserved.
RM-W Series -Original Multi-purpose High-pin-count Miniature Waterproof Connectors
Note : Recommended nut tightening torque : 3N•m
Part No. HRS No.
No. of contacts
A
Weight
RM15WTRZA-2P(7*)
109-1651-0 7*
2 21 22g
RM15WTRZA-3P(7*)
109-1652-2 7*
3 22.1 24g
RM15WTRZA-4P(7*)
109-1653-5 7*
4 21 23g
RM15WTRZA-8P(7*)
109-1654-8 7*
8
20.65
22g
RM15WTRZA-10P(7*)
109-1655-0 7*
10 23g
RM15WTRZA-12P(7*)
109-1656-3 7*
12
Part No. HRS No.
No. of contacts
A
Weight
RM15WTRZA-2S(7*)
109-1657-6 7*
2 21.75 24g
RM15WTRZA-3S(7*)
109-1658-9 7*
3 22.1 26g
RM15WTRZA-4S(8*)
109-1659-1 8*
4 21.75
24g
RM15WTRZA-8S(7*)
109-1660-0 7*
8
21.6
RM15WTRZA-10S(7*)
109-1661-3 7*
10
RM15WTRZA-12S(7*)
109-1662-6 7*
12
21
21
Wrench opening
dimension of 18mm
A
96
2
M19∞1
Ø22
RM15WTRZ-10S(71)
Rear panel mount
13
A
2
6.5
M19∞1
24(HEX)
M21∞1
Ø27
RM15WTRZA-10S(71)
(Representative example)
(Representative example)
Note : Recommended nut tightening torque : 3N•m
Part No. HRS No.
No. of contacts
A
Weight
RM15WTRZ-2P(7*)
109-1631-2 7*
2 21 13g
RM15WTRZ-3P(7*)
109-1632-5 7*
3 22.1 15g
RM15WTRZ-4P(7*)
109-1633-8 7*
4 21 14g
RM15WTRZ-8P(7*)
109-1634-0 7*
8
20.65
13g
RM15WTRZ-10P(7*)
109-1635-3 7*
10 14g
RM15WTRZ-12P(7*)
109-1636-6 7*
12
Part No. HRS No.
No. of contacts
A
Weight
RM15WTRZ-2S(7*)
109-1637-9 7*
2 21.75 15g
RM15WTRZ-3S(7*)
109-1638-1 7*
3 22.1 17g
RM15WTRZ-4S(8*)
109-1634-4 8*
4 21.75
15g
RM15WTRZ-8S(7*)
109-1640-3 7*
8
21.6
RM15WTRZ-10S(7*)
109-1641-6 7*
10
RM15WTRZ-12S(7*)
109-1642-9 7*
12
Receptacles
Front panel mount
[Specification number] ( *), - *
(71)(81) : Silver plated contacts
(72)(82) : Gold plated contacts
[Specification number] ( *), - *
(71)(81) : Silver plated contacts
(72)(82) : Gold plated contacts
6
Mar.1.2019Copyright2019HIROSEELECTRICCO.,LTD.AllRightsReserved.
RM-W Series -Original Multi-purpose High-pin-count Miniature Waterproof Connectors
Waterproof (single body)
RM15WTRZB-10PA(71)
Note 1 : Screw size : M3
Note 2 : Recommended nut tightening torque : 0.3 to 0.35N•m
2
3
2
3
1
1
28
2
M19∞1
6
Ø19
Ø1.9
9
A
4-Ø3.6
20.6
20.6
28
2
3
2
3
1
1
28
2
M19∞1
6
Ø19
Ø1.9
9
A
4-Ø3.6
20.6
20.6
28
RM15WTRZB-10S(71)
(Representative example)
(Representative example)
[Specification number] (**), -**
(71) : Silver plated contacts
(72) : Gold plated contacts
Part No. HRS No.
No. of contacts
A
Weight
RM15WTRZB-2P(7*)
109-1671-7 7*
2 21 19g
RM15WTRZB-3P(7*)
109-1672-0 7*
3 22.1 21g
RM15WTRZB-4P(7*)
109-1673-2 7*
4 21 20g
RM15WTRZB-8P(7*)
109-1674-5 7*
8
20.65
19g
RM15WTRZB-10P(7*)
109-1675-8 7*
10 20g
RM15WTRZB-12P(7*)
109-1676-0 7*
12
Part No. HRS No.
No. of contacts
A
Weight
RM15WTRZB-2S(7*)
109-1677-3 7*
2 21.75 21g
RM15WTRZB-3S(7*)
109-1678-6 7*
3 22.1 23g
RM15WTRZB-4S(8*)
109-1679-9 8*
4 21.75
21g
RM15WTRZB-8S(7*)
109-1680-8 7*
8
21.6
RM15WTRZB-10S(7*)
109-1681-0 7*
10
RM15WTRZB-12S(7*)
109-1682-3 7*
12
Note 1 : Screw size : M3
Note 2 : Recommended nut tightening torque : 0.3 to 0.35N•m
Part No. HRS No.
No. of contacts
A
Weight
RM15WTRZB-3PA(**)
109-1692 7 3 22.1 20g
RM15WTRZB-4PA(**)
109-1693 0 4 21 21g
Part No. HRS No.
No. of contacts
A
Weight
RM15WTRZB-8PA(**)
109-1694 2 8 20.65 22g
RM15WTRZB-10PA(**)
109-1695 5 10 20.6 24g
Receptacles (Square flange)
Waterproof (When mated with corresponding plug)
[Specification number] ( *), - *
(71)(81) : Silver plated contacts
(72)(82) : Gold plated contacts
7
Mar.1.2019Copyright2019HIROSEELECTRICCO.,LTD.AllRightsReserved.
RM-W Series -Original Multi-purpose High-pin-count Miniature Waterproof Connectors
Plug -- Disassembly / Assembly
Cable
Set screw(2)
Back shell
Tightening ring
Table 1
Part No. No. of contacts A B
RM15WTPZA-** 36mm
21mm
2,4,8,10,12 3mm
RM15WTPZ-** 36mm
12mm
2,4,8,10,12 3mm
RM15WTLP-** 10,12 25mm
1.
Disassembly
1
Fix the plug in the assembly fixture (RM15TP-T01 (HRS No.150-0098-0)), then remove the insulator body (P) and the back shell.
Right-angle plugs have set screws in the tightening ring at 2 locations. Loosen the set screws before removing the back shell.
2 Remove the 2 screws of the strain relief clamp, and then remove the clamp from the tightening collar.
2.
Wiring
1 Assure that the cable outer diameter will fit the strain relief clamp, and is prepared as recommended in Table 1.
It is recommended that the exposed conductors be pre-soldered, to assure easier insertion in the soldering cup.
2 Pass the parts over the cable in the order of: tightening collar, washer, bushing, back shell, and coupling. Refer to the
drawings (above) for assembly orientation of all components.
3Solder the wires to the contacts of the insulator body (P).
Use of heat-shrink tubing or another insulating media between the soldered contacts is suggested.
3.
Connector Assembly
Straight Plugs
1 Place the completely wired insulator body (P) in the assembly fixture secured in a vise. Insert in the coupling, then back
shell. The back shell should be tightened to a torque of 3N•m.
Right-angle Plugs
1 Place the completely wired insulator body (P) in an assembly fixture secured by a vise. Insert in the coupling, then back
shell (with tightening ring). When attaching the back shell, orient the cable in the desired direction and fasten the tightening
ring to the insulator body (P) with a torque of 3N•m. After this, tighten and fix the 2 sets crews with a torque of 0.2 to 0.25N•m.
Additional assembly recommendations :
In applications where continuous extremely high vibrations may be encountered it is recommended that a thread locking
compound be applied to male threads prior to assembly (Loctite 263 manufactured by Henkel Japan K.K. or equivalent)
2Assemble in the following order : gasket then washer, then the tightening-collar. During assembly, make sure to keep
the tip of the cable sheath at least 3mm from the gasket, as shown in the figure (above).
3To prevent loosening of the male threads, apply Loctite 263 (Henkel Japan K.K. or equivalent) to the male threads of
the back shell. Then tighten the tightening-collar to a torque of 3N•m with the clamp and the cable so that the cable
cannot rotate. (Screw-tighteningtorque : 0.65 to 0.70N•m)
4.
Points to be checked
1This connector has a waterproof feature. Please verify that the assembled connector is waterproof by conducting the
test described below.
2Because the force required to secure the strain relief clamp differs with the cable structure, please check the connector
assembly before use to make sure there is no rotation.
(Test verification of waterproof capability)
Apply air pressure of 17.6kPa for 30 seconds from the mating end of the plug connector. No air should leak from inside
the connector.
Waterproof verification - plug assembly
Apply air pressure of 17.6kPa for 30 seconds from the mating side of the plug assembly. There shall not be any air
leakage from inside the connector when submerged in the water tank.
5.
Precautions
The waterproof capability may be impaired if the cable sheath or gasket is damaged or contaminated when performing
the assembly. Please handle carefully.
Cable jacket
Cable
Wires
Conductors
B
A
3 min
Strain relief clamp
Back shell
Coupling
Tightening collar
Washer
Gasket
Insulator body (P)
Contacts
Clamp
Screw
8
Mar.1.2019Copyright2019HIROSEELECTRICCO.,LTD.AllRightsReserved.
RM-W Series -Original Multi-purpose High-pin-count Miniature Waterproof Connectors
Receptacle - recommended panel cut-outs
Contact Arrangement and Specifications
Precautions
1. Switch off the power of the circuit before disconnecting or plugging- in the connectors.
2. Use a connectors with socket contacts at the power side of the circuit.
3. Make sure that the coupling is in completely cocked position.
4. Use correct plug / receptacle to assure dust and water protection.
Ø17
+0.1
0
Ø7.6+0.1
0
Front mounting, rear nut
Panel thickness : 0.5 to 2mm
For RM15WTRZ receptacles
Ø21
+0.1
0
Ø19.65+0.05
0
Rear mounting, front nut
Panel thickness : 0.5 to 2.5mm
For RM15WTRZA receptacles
4-M3∞0.5
Ø24+0.1
0
Ø19.2+0.1
0
20.6±0.05
20.6±0.05
1.4±0.05
Square flange, screw mounting
Panel thickness : 2.5 to 4mm
For RM15WTRZB receptacles
Note 1 : When attaching the receptacle to the panel, be certain to check that the gasket is in place in the groove. Do not pinch the gasket.
Note 2 : The view of the above diagrams is from the receptacle mating side.
Note 3 : The symbol in the above diagrams indicates the coupling guide position of the receptacles.
Note 1 : The contact configuration as viewed from the wiring side.
Note 2 : The symbol in the above diagrams indicates the coupling guide position of the receptacles.
Note 3 : Withstanding voltages indicate test voltage values.
Contact
arrangement
Shell size : 15
No. of contacts
23481012
Withstanding voltage
1,800V AC / 1 minute 2,000V AC / 1 minute
1,500V AC / 1 minute 1,000V AC / 1 minute
Current rating 10A 5A
Insulation resistance
1,000Mø min.
Contact resistance
2mø max. 4mø max.
Solder pot inner diameter
1.7mm 2.8mm 1.7mm 1.1mm
9
Mar.1.2019Copyright2019HIROSEELECTRICCO.,LTD.AllRightsReserved.
RM-W Series -Original Multi-purpose High-pin-count Miniature Waterproof Connectors
Product Specifications (RM21WT to RM31WT size products)
Rating
Voltage rating
600V AC, 840V DC (40 pos.)
500V AC, 700V DC (15, 55 pos.)
350V AC, 490V DC (20 pos.)
Current rating 5A
Operating temperature range (Note 1) -25ç to +85ç
Storage temperature range (Note 2) -10ç to +60ç
Item Material Finish Remarks
Body Brass Chrome plated or nickel plated -------------------
Insulator Diallyl phthalate resin ------------------- UL94V-0 (Color : Black)
Contacts Brass, copper alloy Silver plated -------------------
Packing Chloroprene rubber or SIR ------------------- (Color : Black)
Characteristic Specification Conditions
1. Contact resistance 4mø max. 1A DC
2. Insulation resistance 1,000Mø min 500V DC
3. Withstanding voltage No flashover or insulation breakdown.
1,800V AC/1 minute (40 pos.)
1,500V AC/1 minute (15, 55 pos.)
1,000V AC/1 minute (20 pos.)
4. Vibration No electrical discontinuity for 10μs max. Frequency : 10 to 55Hz, single amplitude of 0.75mm,
for 3 hours in 3 axis.
5. Shock No electrical discontinuity for 10μs max. Acceleration of 490m/s2, 11ms duration, sine half-wave
waveform, 3 cycles in each of the 3 axis.
6. Durability
(insertion/withdrawal) 8mø max. 2,000 cycles
7. Temperature cycle Insulation resistance : 100Mø min.
Temperature : -55ç Room temperature +85ç Room temperature
Time
: 30 10 to 15 30 10 to 15 (Minutes) 5 cycles
8. Humidity
Insulation resistance : 100Mø min. (Dray state)
96 hours at temperature of 40ç and humidity of 90% to 95%.
9.
Water / dust protection
When mated with corresponding connector.
Complete dust protection. No water penetration
when submerged for 48 hours at the depth of 1.8 meter.
Materials / Finish
Note 1 : Includes temperature rise caused by the current flow.
Note 2 : The term “storage” refers to products stored for long period of time prior to mounting and use. Operating temperature range and
humidity range covers non-conducting condition of installed connectors in storage, shipment or during transportation.
Note : Do not mix different contact plating.
Series name : RM-W Number of contacts
Shell size Contact type
P : Male contact
S : Female contact
Lock type
T : Screw Lock
Connector type
P : Plug
R : Receptacle
Other specifications
A two-digit number is added to
indicate other specifications.
1 5
62
3
47
RM 31
W
T P*
- 40
S (**)
1234 5 6
17
CP : Strain relief () with : External cable clamp
() without : Internal cable clamp
Numbers : Cable size
9
RM 21 W T P
-
CP (10) (**)
8 9 7
8
Product Number Structure
Refer to the chart below when determining the product specifications from the product number.
Please select from the product numbers listed in this catalog when placing orders.
10
Mar.1.2019Copyright2019HIROSEELECTRICCO.,LTD.AllRightsReserved.
RM-W Series -Original Multi-purpose High-pin-count Miniature Waterproof Connectors
Part No. HRS No. No. of contacts ØA ØB C E F
Weight Remarks
RM21WTP-15S(31) 109-1401-2 31 15
21 32 37.5 TM25∞2 M20∞0.75
86g
Silver
plated
only
RM21WTP-15P(31) 109-1403-8 31 85g
RM21WTP-20S(31) 109-1402-5 31 20 88g
RM21WTP-20P(31) 109-1404-0 31 85g
RM31WTP-40S(71) 109-1571-2 71 40
30.8 42 52 TM35∞2 M28∞0.75
152g
RM31WTP-40P(85) 109-1573-8 85
RM31WTP-55S(71) 109-1572-5 71 55 157g
RM31WTP-55P(71) 109-1574-0 71 150g
Plugs - Straight Short Back Shell D
C
ØA
ØB
E
14
13
9
8
765
4
3
2
1
10
15 11
12
Y
Z
Set screw
(Representative example)
RM21WTP-15P(31)
Note : Recommended set screw tightening torque : 0.2 to 0.3 N•m.
Note 1 : Cable jacket diameter : Use A ± 0.2mm.
Note 2 : Code cramp No. should be the same as connector shell No.
Note 3 : When using the self-tightening strain relief verify the cable pull force requirements.
Note 4 : Recommended set screw tightening torque : 0.2 to 0.3N•m.
Set screw
ØA
D
C
ØB
E
(Representative example)
Internal, self tightening
RM21WTP-CP(8)(71)
Part No. HRS No. ØA ØB C D E Weight Remarks
RM21WTP-CP(8)(71) 109-1405-3 71 8
23 38 7.5 M20∞0.75
22.5g
For RM21WTRM21WTP-CP(10)(71) 109-1406-6 71 10 22g
RM21WTP-CP(12)(71) 109-1407-9 71 12 21.5g
RM31WTP-CP(10)(71) 109-1575-3 71 10
31 42 12 M28∞0.75
46g
For RM31WT
RM31WTP-CP(12)(71) 109-1576-6 71 12
RM31WTP-CP(14)(71) 109-1579-4 71 14 45g
RM31WTP-CP(16)(71) 109-1577-9 71 16 43.5g
RM31WTP-CP(18)(71) 109-1578-1 71 18 42g
Note 1 : Cable jacket diameter:Use A ± 0.2mm.
Note 2 : HRS recommended tool : 1.27mm Hex Wrench
Note 3 : Recommended set screw tightening torque : 0.3 to 0.4N•m.
ØB
ØA
E
Wrench opening dimension D C
(Representative example)
Applicable Strain Reliefs
External cable clamp + internal, self-tightening
JR16WCC-10(72)
Part No. HRS No. ØA ØB C D E
Weight Remarks
JR16WCC-4(72) 114-2052-6 72 4
23 17.5 21 M20∞0.75 17.5g
For RM21WT
(No locking
screw attached)
JR16WCC-6(72) 114-2053-9 72 6
JR16WCC-8(72) 114-2054-1 72 8
JR16WCC-10(72) 114-2055-4 72 10
JR16WCC-11(72) 114-2154-6 72 11
JR16WCC-12(72) 114-2056-7 72 12
11
Mar.1.2019Copyright2019HIROSEELECTRICCO.,LTD.AllRightsReserved.
RM-W Series -Original Multi-purpose High-pin-count Miniature Waterproof Connectors
Receptacles
ØA
CD
13
14
15
12
1
11
10
11 9
12
8
15
2
3
14
7
4
65
13
Y
Z
10 1
2
3
9
8
4
7
5
6
Y
Z
EB
F
(Representative example)
RM21WTR-15P(31)
Front panel mount
Part No. HRS No.
No. of contacts
ØA B C D E F
Weight
Remarks
RM21WTR-15P(31) 109-1445-8 31 15 31
21 6.5 2.5
23.5 TM25∞2 28g
Silver
plated
only
RM21WTR-20P(31) 109-1446-0 31 20 31.5g
RM31WTR-40S(85) 109-1527-0 85 40
41 34 TM35∞2
52g
RM31WTR-40P(71) 109-1525-5 71 50g
RM31WTR-55S(71) 109-1528-3 71 55 54g
RM31WTR-55P(71) 109-1526-8 71 53.5g
ØA
B
RC
Note : Tolelance is +0.1/0.
Receptacle - recommended panel cut-out
Note 1 : When attaching the receptacle to the panel, be certain to check that the gasket is in place in the groove. Do not pinch the gasket.
Note 2 : The view of the above diagrams is from the receptacle mating side.
Note 3 : The symbol in the above diagrams indicates the coupling guide position of the receptacles.
Panel thickness : 0.5 to 2mm
For RM**WTR receptacles
Front mounting, rear nut
Part No. ØA B RC
For RM21WTR 22.1 12.75 0.8
For RM31WTR 32.1 17.75 0.85
Contact arrangement
Shell size : 21 Shell size : 31
Number of contacts 15 20 55
Withstanding voltage 1,500V AC / 1 minute 1,000V AC / 1 minute 1,500V AC / 1 minute
Current rating 5A
Insulation resistance 1,000Mø min.
Contact resistance 4mø max.
Solder pot inner diameter
1.1mm
Contact Arrangement and Specifications
Precautions
Note 1 : The contact configuration as viewed from the wiring side.
Note 2 : The symbol in the above diagrams indicates the coupling guide position of the receptacles.
Note 3 : Withstanding voltages indicate test voltage values.
1. Switch off the power of the circuit before disconnecting or plugging- in the connectors.
2. Use a connectors with socket contacts at the power side of the circuit.
3. Make sure that the coupling is in completely locked position.
4. Use correct plug / receptacle to assure dust and water protection.
1
2
3
4
56
7
8
9
10
11
12
13
14
15
17
16
18
19
20
123
4
5
6
7
8
9
10
11
12
13
14
15
16 17 18 19 20 2122
23
24
25
26
27
28
29
30
31
32
33
34 35 36 37 38 39
40
41
42
43
44
45
46
47 48 49 50
51
52
53
54 55
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.
The contents of this catalog are current as of date of 07/2018. Contents are subject to change without notice for the purpose of improvements.
2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN
TEL: +81-45-620-3526 Fax: +81-45-591-3726
http://www.hirose.com
http://www.hirose-connectors.com
®
12
Mar.1.2019Copyright2019HIROSEELECTRICCO.,LTD.AllRightsReserved.