10 SEGMENTS BAR GRAPH ARRAY DC10SRWA SUPER BRIGHT RED Features zSUITABLE FOR LEVEL INDICATORS. Description zLOW CURRENT OPERATION. The Super Bright Red source color devices are made zEXCELLENT ON/OFF CONTRAST. with Gallium Aluminum Arsenide Red Light Emitting zWIDE VIEWING ANGLE. Diode. zEND STACKABLE. zMECHANICALLY RUGGED. zBI-COLOR VERSION AVAILABLE. zSTANDARD : GRAY FACE, WHITE SEGMENT. z RoHS COMPLIANT. Package Dimensions & Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is 0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. SPEC NO: DSAD1427 REV NO: V.3 DATE: APR/25/2005 PAGE: 1 OF 3 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: S.H.CHEN ERP:1331000048 Selection Guide Part No. Dice DC10SRWA Iv (ucd) @ 10mA Lens Type SUPER BRIGHT RED (GaAIAs) WHITE DIFFUSED Min. Typ. 8000 31000 Description 10 Segments Bargraph-Display Electrical / Optical Characteristics at TA=25C Symbol Parameter Device peak Peak Wavelength Super Bright Red D Dominant Wavelength 1/2 Typ. Max. Units Test Conditions 660 nm IF=20mA Super Bright Red 640 nm IF=20mA Spectral Line Half-width Super Bright Red 20 nm IF=20mA C Capacitance Super Bright Red 45 pF VF=0V;f=1MHz VF Forward Voltage Super Bright Red 1.85 2.5 V IF=20mA IR Reverse Current Super Bright Red 10 uA VR = 5V Absolute Maximum Ratings at TA=25C Parameter Super Bright Red Units Power dissipation 100 mW DC Forward Current 30 mA Peak Forward Current [1] 155 mA 5 V Reverse Voltage Operating / Storage Temperature -40C To +85C Lead Solder Temperature [2] 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 5mm below package base. SPEC NO: DSAD1427 REV NO: V.3 DATE: APR/25/2005 PAGE: 2 OF 3 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: S.H.CHEN ERP:1331000048 Super Bright Red DC10SRWA Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAD1427 REV NO: V.3 DATE: APR/25/2005 PAGE: 3 OF 3 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: S.H.CHEN ERP:1331000048