V-430P474X9050 - Vishay Presicion Group

Document Number: 42091 For technical questions, contact: spresale@vishay.com www.vishay.com

Revision: 12-Mar-09 25

Metallized Polyester Film Capacitors, Wrap-and-Fill

V-430 P

Vishay Sprague

FEATURES

•Economical

•Extensive standard ratings

•Rugged construction

•Small size

•Compliant to RoHS directive 2002/95/EC

PERFORMANCE CHARACTERISTICS

Operating Temperature: - 55 °C to + 85 °C

Capacitance Range: 0.0047 µF to 10.0 µF

Capactiance Tolerance: ± 20 %, ± 10 %, ± 5 %

DC Voltage Rating: 50 WVDC to 600 WVDC

Dissipation Factor: 1.0 % maximum

Voltage Test: 200 % of rated voltage for 2 min

Insulation Resistance:

At + 25 °C: 25 000 MΩ/µF or 50 000 MΩ minimum

At + 85 °C: 1000 MΩ/µF or 2500 MΩ minimum

Vibration Test (Condition B):

No mechanical damage, short, open or intermittent circuits.

DC Life Test: 125 % of rated voltage for 250 h at + 85 °C.

No open or short circuits. No visible damage.

Maximum Δ CAP = ± 10 %

Minimum IR = 50 % of initial limit

Maximum DF = 1.25 %

Humidity Test: 95 % relative humidity at + 40 °C for 250 h.

No visible damage.

Maximum Δ CAP ± 10 %

Minimum IR = 20 % of initial limit

Maximum DF = 2.0 %

PHYSICAL CHARACTERISTICS

Lead Pull: 5 lb (2.3 kg) for one min. No physical damage.

Lead Bend: After three complete consecutive bends, no

damage.

Marking: Sprague® trademark, type or part number,

capacitance and voltage.

Note

(1) Lead size: D Max. < 0.270 [6.86] 0.025 [0.64] (No. 22 AWG). D Max ≥ 0.270 [6.86] 0.032 [0.81] (No. 20 AWG).

Leads to be within ± 0.062" [1.57 mm] of center line at egress but not less than 0.031" [0.79 mm] from edge.

DIMENSIONS in inches (millimeters)

Max.

Solid Tinned Wire (1)

+ 0.062 [1.57]

- 0.031 [0.79]

1.750 [44.45]

Min.

1.750 [44.45]

Min.

STANDARD RATINGS in inches [millimeters]

CAPACITANCE

(µF)

PART NUMBER CASE SIZE LEAD

AWG NO.

± 10 % TOLERANCE ± 5 % TOLERANCE D L

50 WVDC

0.12 V-430P124X9050 V-430P124X5050 0.196 [4.98] 0.625 [15.88] 22

0.15 V-430P154X9050 V-430P154X5050 0.210 [5.33] 0.625 [15.88] 22

0.18 V-430P184X9050 V-430P184X5050 0.223 [5.66] 0.625 [15.88] 22

0.22 V-430P224X9050 V-430P224X5050 0.240 [6.10] 0.625 [15.88] 22

0.27 V-430P274X9050 V-430P274X5050 0.258 [6.55] 0.625 [15.88] 22

0.33 V-430P334X9050 V-430P334X5050 0.279 [7.09] 0.625 [15.88] 20

0.39 V-430P394X9050 V-430P394X5050 0.250 [6.35] 0.750 [19.05] 22

0.47 V-430P474X9050 V-430P474X5050 0.269 [6.83] 0.750 [19.05] 22

0.56 V-430P564X9050 V-430P564X5050 0.288 [7.32] 0.750 [19.05] 20

0.68 V-430P684X9050 V-430P684X5050 0.311 [7.90] 0.750 [19.05] 20

0.82 V-430P824X9050 V-430P824X5050 0.270 [6.86] 1.000 [25.40] 20

V-430 P

Vishay Sprague Metallized Polyester Film Capacitors, Wrap-and-Fill

www.vishay.com For technical questions, contact: spresale@vishay.com Document Number: 42091

26 Revision: 12-Mar-09

Note

• Other capacitance values and voltage ratings are available upon request

STANDARD RATINGS in inches [millimeters]

CAPACITANCE

(µF)

PART NUMBER CASE SIZE LEAD

AWG NO.

± 10 % TOLERANCE ± 5 % TOLERANCE D L

50 WVDC

1.0 V-430P105X9050 V-430P105X5050 0.291 [7.39] 1.000 [25.40] 20

1.5 V-430P155X9050 V-430P155X5050 0.344 [8.74] 1.000 [25.40] 20

2.0 V-430P205X9050 V-430P205X5050 0.400 [10.16] 1.000 [25.40] 20

2.5 V-430P255X9050 V-430P255X5050 0.438 [11.13] 1.000 [25.40] 20

3.0 V-430P305X9050 V-430P305X5050 0.398 [10.11] 1.250 [31.75] 20

4.0 V-430P405X9050 V-430P405X5050 0.434 [11.02] 1.500 [38.10] 20

5.0 V-430P505X9050 V-430P505X5050 0.476 [12.09] 1.500 [38.10] 20

6.0 V-430P605X9050 V-430P605X5050 0.515 [13.08] 1.500 [38.10] 20

7.0 V-430P705X9050 V-430P705X5050 0.551 [14.00] 1.500 [38.10] 20

10.0 V-430P106X9050 V-430P106X5050 0.647 [16.43] 1.500 [38.10] 20

100 WVDC

0.082 V-430P823X9100 V-430P823X5100 0.192 [4.88] 0.625 [15.88] 22

0.1 V-430P104X9100 V-430P104X5100 0.204 [5.18] 0.625 [15.88] 22

0.12 V-430P124X9100 V-430P124X5100 0.216 [5.49] 0.625 [15.88] 22

0.15 V-430P154X9100 V-430P154X5100 0.233 [5.92] 0.625 [15.88] 22

0.18 V-430P184X9100 V-430P184X5100 0.213 [5.41] 0.750 [19.05] 22

0.22 V-430P224X9100 V-430P224X5100 0.228 [5.79] 0.750 [19.05] 22

0.27 V-430P274X9100 V-430P274X5100 0.245 [6.22] 0.750 [19.05] 22

0.33 V-430P334X9100 V-430P334X5100 0.264 [6.71] 0.750 [19.05] 22

0.39 V-430P394X9100 V-430P394X5100 0.230 [5.84] 1.000 [25.40] 22

0.47 V-430P474X9100 V-430P474X5100 0.246 [6.25] 1.000 [25.40] 22

0.56 V-430P564X9100 V-430P564X5100 0.262 [6.65] 1.000 [25.40] 22

0.68 V-430P684X9100 V-430P684X5100 0.283 [7.19] 1.000 [25.40] 20

0.82 V-430P824X9100 V-430P824X5100 0.265 [6.73] 1.250 [31.75] 22

1.0 V-430P105X9100 V-430P105X5100 0.286 [7.26] 1.250 [31.75] 20

1.5 V-430P155X9100 V-430P155X5100 0.351 [8.92] 1.250 [31.75] 20

2.0 V-430P205X9100 V-430P205X5100 0.393 [9.98] 1.250 [31.75] 20

2.5 V-430P255X9100 V-430P255X5100 0.430 [10.92] 1.250 [31.75] 20

3.0 V-430P305X9100 V-430P305X5100 0.464 [11.79] 1.250 [31.75] 20

4.0 V-430P405X9100 V-430P405X5100 0.494 [12.55] 1.500 [38.10] 20

5.0 V-430P505X9100 V-430P505X5100 0.544 [13.82] 1.500 [38.10] 20

6.0 V-430P605X9100 V-430P605X5100 0.591 [15.01] 1.500 [38.10] 20

7.0 V-430P705X9100 V-430P705X5100 0.633 [16.08] 1.500 [38.10] 20

10.0 V-430P106X9100 V-430P106X5100 0.678 [17.22] 1.750 [44.45] 20

200 WVDC

0.047 V-430P473X9200 V-430P473X5200 0.200 [5.08] 0.625 [15.88] 22

0.056 V-430P563X9200 V-430P563X5200 0.211 [5.36] 0.625 [15.88] 22

0.068 V-430P683X9200 V-430P683X5200 0.225 [5.72] 0.625 [15.88] 22

0.082 V-430P823X9200 V-430P823X5200 0.240 [6.10] 0.625 [15.88] 22

0.10 V-430P104X9200 V-430P104X5200 0.221 [5.61] 0.750 [19.05] 22

0.12 V-430P124X9200 V-430P124X5200 0.234 [5.94] 0.750 [19.05] 22

0.15 V-430P154X9200 V-430P154X5200 0.254 [6.45] 0.750 [19.05] 22

0.18 V-430P184X9200 V-430P184X5200 0.272 [6.91] 0.750 [19.05] 20

0.22 V-430P224X9200 V-430P224X5200 0.295 [7.49] 0.750 [19.05] 20

0.27 V-430P274X9200 V-430P274X5200 0.258 [6.55] 1.000 [25.40] 22

0.33 V-430P334X9200 V-430P334X5200 0.279 [7.09] 1.000 [25.40] 20

0.39 V-430P394X9200 V-430P394X5200 0.298 [7.57] 1.000 [25.40] 20

0.47 V-430P474X9200 V-430P474X5200 0.321 [8.15] 1.000 [25.40] 20

0.56 V-430P564X9200 V-430P564X5200 0.345 [8.76] 1.000 [25.40] 20

0.68 V-430P684X9200 V-430P684X5200 0.375 [9.53] 1.000 [25.40] 20

0.82 V-430P824X9200 V-430P824X5200 0.350 [8.89] 1.250 [31.75] 20

1.0 V-430P105X9200 V-430P105X5200 0.380 [9.65] 1.250 [31.75] 20

1.5 V-430P155X9200 V-430P155X5200 0.454 [11.53] 1.250 [31.75] 20

2.0 V-430P205X9200 V-430P205X5200 0.469 [11.91] 1.500 [38.10] 20

2.5 V-430P255X9200 V-430P255X5200 0.516 [13.11] 1.500 [38.10] 20

3.0 V-430P305X9200 V-430P305X5200 0.559 [14.20] 1.500 [38.10] 20

4.0 V-430P405X9200 V-430P405X5200 0.580 [14.73] 1.750 [44.45] 20

5.0 V-430P505X9200 V-430P505X5200 0.641 [16.28] 1.750 [44.45] 20

Document Number: 42091 For technical questions, contact: spresale@vishay.com www.vishay.com

Revision: 12-Mar-09 27

V-430 P

Metallized Polyester Film Capacitors, Wrap-and-Fill Vishay Sprague

Note

• Other capacitance values and voltage ratings are available upon request

STANDARD RATINGS in inches [millimeters]

CAPACITANCE

(µF)

PART NUMBER CASE SIZE LEAD

AWG NO.

± 10 % TOLERANCE ± 5 % TOLERANCE D L

400 WVDC

0.015 V-430P153X9400 V-430P153X5400 0.186 [4.72] 0.625 [15.88] 22

0.018 V-430P183X9400 V-430P183X5400 0.197 [5.00] 0.625 [15.88] 22

0.022 V-430P223X9400 V-430P223X5400 0.210 [5.33] 0.625 [15.88] 22

0.027 V-430P273X9400 V-430P273X5400 0.224 [5.69] 0.625 [15.88] 22

0.033 V-430P333X9400 V-430P333X5400 0.241 [6.12] 0.625 [15.88] 22

0.039 V-430P393X9400 V-430P393X5400 0.256 [6.50] 0.625 [15.88] 22

0.047 V-430P473X9400 V-430P473X5400 0.275 [6.99] 0.625 [15.88] 20

0.056 V-430P563X9400 V-430P563X5400 0.248 [6.30] 0.750 [19.05] 22

0.068 V-430P683X9400 V-430P683X5400 0.266 [6.76] 0.750 [19.05] 22

0.082 V-430P823X9400 V-430P823X5400 0.286 [7.26] 0.750 [19.05] 20

0.10 V-430P104X9400 V-430P104X5400 0.310 [7.87] 0.750 [19.05] 20

0.12 V-430P124X9400 V-430P124X5400 0.268 [6.81] 1.000 [25.40] 22

0.15 V-430P154X9400 V-430P154X5400 0.293 [7.44] 1.000 [25.40] 20

0.18 V-430P184X9400 V-430P184X5400 0.315 [8.00] 1.000 [25.40] 20

0.22 V-430P224X9400 V-430P224X5400 0.342 [8.69] 1.000 [25.40] 20

0.27 V-430P274X9400 V-430P274X5400 0.322 [8.18] 1.250 [31.75] 20

0.33 V-430P334X9400 V-430P334X5400 0.350 [8.89] 1.250 [31.75] 20

0.39 V-430P394X9400 V-430P394X5400 0.337 [8.56] 1.500 [38.10] 20

0.47 V-430P474X9400 V-430P474X5400 0.364 [9.25] 1.500 [38.10] 20

0.56 V-430P564X9400 V-430P564X5400 0.393 [9.98] 1.500 [38.10] 20

0.68 V-430P684X9400 V-430P684X5400 0.402 [10.21] 1.750 [44.45] 20

0.82 V-430P824X9400 V-430P824X5400 0.434 [11.02] 1.750 [44.45] 20

1.0 V-430P105X9400 V-430P105X5400 0.472 [11.99] 1.750 [44.45] 20

1.5 V-430P155X9400 V-430P155X5400 0.563 [14.30] 1.750 [44.45] 20

2.0 V-430P205X9400 V-430P205X5400 0.640 [16.26] 1.750 [44.45] 20

600 WVDC

0.0047 V-430P472X9600 V-430P472X5600 0.187 [4.75] 0.625 [15.88] 22

0.0056 V-430P562X9600 V-430P562X5600 0.197 [5.00] 0.625 [15.88] 22

0.0068 V-430P682X9600 V-430P682X5600 0.209 [5.31] 0.625 [15.88] 22

0.0082 V-430P822X9600 V-430P822X5600 0.223 [5.66] 0.625 [15.88] 22

0.01 V-430P103X9600 V-430P103X5600 0.239 [6.07] 0.625 [15.88] 22

0.012 V-430P123X9600 V-430P123X5600 0.255 [6.48] 0.625 [15.88] 22

0.015 V-430P153X9600 V-430P153X5600 0.224 [5.69] 0.750 [19.05] 22

0.018 V-430P183X9600 V-430P183X5600 0.239 [6.07] 0.750 [19.05] 22

0.022 V-430P223X9600 V-430P223X5600 0.257 [6.53] 0.750 [19.05] 22

0.027 V-430P273X9600 V-430P273X5600 0.278 [7.06] 0.750 [19.05] 20

0.033 V-430P333X9600 V-430P333X5600 0.300 [7.62] 0.750 [19.05] 20

0.039 V-430P393X9600 V-430P393X5600 0.251 [6.38] 1.000 [25.40] 22

0.047 V-430P473X9600 V-430P473X5600 0.269 [6.83] 1.000 [25.40] 22

0.056 V-430P563X9600 V-430P563X5600 0.288 [7.32] 1.000 [25.40] 20

0.068 V-430P683X9600 V-430P683X5600 0.311 [7.90] 1.000 [25.40] 20

0.082 V-430P823X9600 V-430P823X5600 0.336 [8.53] 1.000 [25.40] 20

0.10 V-430P104X9600 V-430P104X5600 0.365 [9.27] 1.000 [25.40] 20

0.12 V-430P124X9600 V-430P124X5600 0.335 [8.51] 1.250 [31.75] 20

0.15 V-430P154X9600 V-430P154X5600 0.368 [9.35] 1.250 [31.75] 20

0.18 V-430P184X9600 V-430P184X5600 0.354 [8.99] 1.500 [38.10] 20

0.22 V-430P224X9600 V-430P224X5600 0.385 [9.78] 1.500 [38.10] 20

0.27 V-430P274X9600 V-430P274X5600 0.421 [10.69] 1.500 [38.10] 20

0.33 V-430P334X9600 V-430P334X5600 0.428 [10.87] 1.750 [44.45] 20

0.39 V-430P394X9600 V-430P394X5600 0.459 [11.66] 1.750 [44.45] 20

0.47 V-430P474X9600 V-430P474X5600 0.497 [12.62] 1.750 [44.45] 20

0.56 V-430P564X9600 V-430P564X5600 0.537 [13.64] 1.750 [44.45] 20

0.68 V-430P684X9600 V-430P684X5600 0.585 [14.86] 1.750 [44.45] 20

ORDERING INFORMATION

V-430P 124 X9 050

TYPE CAPACITANCE CAPACITANCE TOLERANCE DC VOLTAGE RATING

This is expressed in picofarads. The first two digits

are the significant figures. The third is the number of

zeros to follow. Values must conform to the decade

rating for the tolerance specified.

X0 = ± 20 %

X9 = ± 10 %

X5 = ± 5 %

This is expressed in volts. To complete

the three-digit block, zeros precede the

voltage rating.

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 12-Mar-12 1Document Number: 91000

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree

to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and

damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay

or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to

obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the

definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council

of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

(EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that

all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.