AXS1
ORDERING INFORMATION
HIGH RELIABILITY
IC SOCKET
WITH ROUND PIN
(SEALED TYPE)
ROUND PIN TYPE
SEALED IC SOCKETS
(AXS1)
FEATURES
1. Sealed IC sockets compatible with
ultrasonic cleaning (30 seconds),
3-bath cleaning (boiling, ultrasonic,
vapor) and hot water.
2. The top surface of the socket is
sealed by the hot melt method for high
bonding strength.
3. High reliability sockets with round
pin contacts and a 4-point contact
construction.
4. Compliance with RoHS’ Directive
Environmentally friendly, the connectors’
comply with Europe’s RoHS’ Directive.
Cadmium, lead, mercury, hexavalent,
chromium, PBB and PBDE are not used.
CONSTRUCTION
Sealing tape is bonded to the top surface
of the IC socket. The sealing tape is
peeled off before IC chip insertion.
Max. 1mm
Tape peel-off
tab
Construction of sealing tape
µIC socket
Hot melt type sealing tape
(Soft stamp pressing the
hot melt sealing tape increasea
the bonding strength)
Base material layer
(Polyester resin with excellent heat
and chemical resistance.)
Adhesive layer (Polyester resin)
11: Round PIN type sealed IC sockets
<Terminal layout and shape>
1: DIL terminal layout, solder DIP terminal
7: DIL terminal layout, solder DIP terminal (24 contacts: row pitch is 7.62 mm)
AXS
<No. of contacts (2 digits)>
08: 8 contacts 14: 14 contacts 16: 16 contacts 18: 18 contacts
20: 20 contacts 22: 22 contacts 24: 24 contacts 28: 28 contacts
32: 32 contacts 36: 36 contacts 40: 40 contacts 48: 48 contacts
64: 64 contacts
<Surface treatment (Internal contact/External sleeve)>
1: Au plating 0.25µm/Sn plating
3: Au plating 0.76µm/Sn plating
9: Sn plating/Sn plating
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
AXS1
PRODUCT TYPES
*1 Pitch: 15.24mm
*2 Pitch: 7.62mm
Note) All are tray packed sockets
SPECIFICATIONS AND DIMENSIONS
1. The specification of the sealed IC socket are the same as the round pin type IC socket.
2. See the DIL solder-dip type for the socket and PC board pattern dimensions.
NOTES FOR SEALED TYPE
Item
Economical type
(Extremely resistant to
fretting with IC)
General-purpose type
(Extremely resistant to
fretting with IC)
High-reliability type
(Contact resistance is stable
even if left unadhered for
extended periods. Quantity in box
External sleeve Sn plating
Internal contact Sn plating Au plating (0.25µm) Au plating (0.76µm)
Type No. of contacts Part No. Part No. Part No. Inner carton Outer carton
DIL
8 AXS110819 AXS110811 AXS110813 60 pcs. 600 pcs.
14 AXS111419 AXS111411 AXS111413
30 pcs. 300 pcs.
16 AXS111619 AXS111611 AXS111613
18 AXS111819 AXS111811 AXS111813
20 AXS112019 AXS112011 AXS112013
22 AXS112219 AXS112211 AXS112213
24*1 AXS112419 AXS112411 AXS112413
24*2 AXS112479 AXS112471 AXS112473
28 AXS112819 AXS112811 AXS112813
32 AXS113219 AXS113211 AXS113213
36 AXS113619 AXS113611 AXS113613
20 pcs. 200 pcs.
40 AXS114019 AXS114011 AXS114013
48 AXS114819 AXS114811 AXS114813
64 AXS116419 AXS116411 AXS116413
1. Storage
1) Store at an ambient temperature of
60°C or lower.
2) Do not peel off the tape until after
cleaning. (If the tape is peeled off before
cleaning, the cleaning liquid will enter the
inside of the contact.)
2. Cleaning
Observe the following conditions when
cleaning.
1) Cleaning time
Boiling bath: within 30 seconds
Vapor bath: within 30 seconds
Ultrasonic bath: within 30 seconds
2) Use a cleaning liquid that will not
dissolve polyester. Also, keep the
temperature of the cleaning liquid at 40°C
or lower.
3. After cleaning, peel off the tape and
insert the IC.
Please see (page 237) above for other
notes.
Regarding general notes, please refer
to page 12.
For other details, please verify with the
product specification sheets.
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
