The FLIR MR160 Imaging Moisture Meter is the rst of its kind.
Equipped with a built-in thermal camera, MR160 is the only moisture
meter with the power to show you exactly where to measure.
Featuring Infrared Guided Measurement (IGM™) technology,
the MR160 helps you quickly scan and target moisture issues,
visually guiding you to the spot where you can condently take
measurements and analyze readings.
An integrated pinless sensor and an external pin probe provide the
exibility to take either intrusive or non-intrusive measurements. Built
tough with an industry-leading warranty, the MR160 can serve as
your go-to troubleshooting tool right out of the box – or as the perfect
complement to any high resolution thermal camera you already
own – helping you nd hidden moisture issues and capture reliable
data more efciently.
IDENTIFY AND VERIFY WITH ONE TOOL.
First-ever thermal imaging moisture meter
• 80 x 60 Lepton® thermal imager powers IGM technology
• Document thermal images and moisture readings on one screen
• Review images and generate reports with free FLIR Tools software
TROUBLESHOOT QUICKLY.
Easily investigate insulation and moisture issues
• Pinless technology for fast non-intrusive measurements
• External pin probe included for contact moisture measurements
• Easy targeting with laser pointer and display cross-hairs
PORTABLE, TOUGH AND DURABLE.
Drop tested rugged design
• Industry-leading warranty
• Small form factor to conveniently carry with you
• Internal rechargeable battery with USB
www.flir.com/mr160
Scanning ceiling & wall joint for moisture issues
IGM technology shows you cold spots, guiding
you where to measure
FLIR MR160
Imaging Moisture Meter
Specifications
www.flir.com
NASDAQ: FLIR
SWEDEN
FLIR Systems, AB
Täby, Sweden
PH: +68.8.753.2500
PORTLAND
Corporate Headquarters
FLIR Systems, Inc.
27700 SW Parkway Ave.
Wilsonville, OR 97070
USA
PH: +1 866.477.3687
EUROPE
FLIR Systems
Luxemburgstraat 2
2321 Meer
Belgium
PH: +32 (0) 3665 5100
Equipment described herein may require US Government authorization for
export purposes. Diversion contrary to US law is prohibited. Imagery for
illustration purposes only. Specifications are subject to change without
notice. ©2015 FLIR Systems, Inc. All rights reserved. (Updated 11/17/15)
www.flir.com/mr160
FLIR MR160: Imaging Moisture Meter
Thermal imaging detector FLIR Lepton® microbolometer
Image Calibration Automatic
Thermal image resolution (W × H) 4800 pixels (80 × 60)
Spectral response 8–14μm
Field of view (W x H) 51° × 38°
Thermal sensitivity <0.15°C
Image frame rate 9 Hz
Image Display Color moisture alert
Minimum focus distance 10cm (4")
Moisture Measurement
Pin moisture via external probe
range (accuracy) 0–100% WME (± 5%)
Pin moisture groups 9 material groups
Pinless moisture range 0–100 relative measurement
Pinless Measurement Depth 0.75" (19mm) Max
Measurement resolution 0.1
Response time pinless 100ms
Response time pin mode 750ms
General information
Display (W x H) QVGA (320 x 240 pixel) 2.3” 64k color TFT
Saved image le format BMP with measurement values overlaid
Stored image capacity 9999 images
Laser orientation Single laser pointer to center of thermal image
Power requirements Integrated rechargable battery
Battery power -
continuous run time 18 hours max
Battery power - typical usage 4 work weeks*
Battery 3.7 V, 3000 mAh Li-ion rechargeable via micro USB
Drop Test 9.8’ (3m)
Certication standards EN61326 (EMC), EN61010 (battery + charger),
EN60825-1 class 2 (Laser)
Agency approvals FCC class B, CE, UL
Warranty 2 Yr Product, 10 Yr Thermal detector**
Ordering Information UPC EAN
MR160 793950371602 0793950371602
MR05 Impact pin probe 793950370056 0793950370056
MR10 Protective case 793950370117 0793950370117
MR05-PINS1 793950371053 0793950371053
MR05-PINS2 (wide) 793950372050 0793950372050
Color Display
Snap & Save
Pictures
Back Button
Laser
Laser
Lepton® Thermal
Imaging Sensor
Charging & Probe
Connector
Pinless Sensor
Navigation Button
MR02 Pin Probe included
Power
NASHUA
FLIR Systems, Inc.
9 Townsend West
Nashua, NH 03063
USA
PH: +1 866.477.3687
*See FAQs at ir.com/MR160
** Register within 60 days of purchase at www.ir.com/testwarranty