HDSP-390x Series 20 mm (0.8 inch) Seven Segment Displays Data Sheet HDSP-390x Series HDSP-420x Series HDSP-860x Series HDSP-N15x Series Description Features The 20 mm (0.8 inch) LED seven segment displays are designed for viewing distances up to 10 metres (33 feet). These devices use an industry standard size package and pinout. All devices are available as either common anode or common cathode. x Industry standard size x Industry standard pinout 15.24 mm (0.6 in.) DIP leads on 2.54 mm (0.1 in.) centers Applications x Choice of Colors AlGaAs Red, High Efficiency Red, Yellow, Green These displays are ideal for most applications. Pin for pin equivalent displays are also available in a low current design. The low current displays are ideal for portable applications. For additional information see the Low Current Seven Segment Displays data sheet. x Excellent appearance Evenly lighted segments Mitered corners on segments Gray package gives optimum contrast 50 viewing angle x Design flexibility Common anode or common cathode Left and right hand decimal points x Categorized for luminous intensity Yellow and green categorized for color Use of like categories yields a uniform display x High light output x High peak current x Excellent for long digit string multiplexing intensity and color selection option See Intensity and Color Selected Displays Data Sheet x Sunlight viewable AlGaAs Devices AlGaAs[1] HDSP- HER HDSP- N150 3900 N151 3901 4201 N153 3903 4203 3905 Yellow HDSP- Green HDSP- Description Package Drawing Common Anode Left Hand Decimal A 8601 Common Anode Right Hand Decimal B 8603 Common Cathode Right Hand Decimal C Common Cathode Left Hand Decimal D Notes: 1. These displays are recommended for high ambient light operation. Please refer to the HDSP-N10x AlGaAs data sheet for low current operation. Part Numbering System 5082 - X X X X - X X X X X HDSP- X X X X - X X X X X Mechanical Options[1] 00: No Mechanical Option Color Bin Options[1,2] 0: No Color Bin Limitation Z: Color Bins 2- and 3+ Only (applicable for Yellow devices only) Maximum Intensity Bin[1,2] 0: No Maximum Intensity Bin Limitation Minimum Intensity Bin[1,2] 0: No Minimum Intensity Bin Limitation Device Configuration/Color[1] 0: Common Anode 1: Common Anode 3: Common Cathode Device Specific Configuration[1] Refer to Respective Datasheet Package[1] N: 20 mm (0.8 inch) Single Digit Seven Segment Display Notes: 1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearest Avago representative for details. 2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1 bin per tube (exceptions may apply). Please refer to respective datasheet for specific bin limit information. 2 Package Dimensions 11.07 (0.436) 11.07 (0.436) 8 20.32 (0.800) 1 2 3 4 5 6 7 8 9 18 17 16 15 14 13 12 11 10 8 10.16 (0.400) 1 2 3 4 5 6 7 8 9 13.08 (0.515) 27.69 0.25 (1.090 0.010) LHDP 18 17 16 15 14 13 12 11 10 NOTE 4 NOTE 4 1.27 (0.050) 1.27 (0.050) CL CL RHDP 8.25 (0.325) 8.25 (0.325) CHARACTER CL FUNCTION CHARACTER CL PIN PACKAGE PACKAGE FRONT VIEW A, D FRONT VIEW B, C LUMINOUS INTENSITY CATEGORY 19.96 MAX. (0.786) 0.51 (0.020) 5.08 (0.200) COLOR BIN B C D 1 NO PIN NO PIN NO PIN NO PIN 2 CATHODE a CATHODE a ANODE a ANODE a 3 CATHODE f CATHODE f ANODE f ANODE f 4 ANODE[3] ANODE[3] CATHODE[6] CATHODE[6] 5 CATHODE e CATHODE e ANODE e ANODE e 6 ANODE[3] ANODE[3] CATHODE[6] CATHODE[6] 7 CATHODE dp NO CONNEC. NO CONNEC. ANODE dp 8 NO PIN NO PIN NO PIN NO PIN 9 NO PIN NO PIN NO PIN NO PIN 10 NO PIN CATHODE dp ANODE dp NO PIN 11 CATHODE d CATHODE d ANODE d ANODE d 12 ANODE[3] ANODE[3] CATHODE[6] CATHODE[6] 13 CATHODE c CATHODE c ANODE c ANODE c 14 CATHODE g CATHODE g ANODE g ANODE g 15 CATHODE b CATHODE b ANODE b ANODE b 16 NO PIN NO PIN NO PIN NO PIN 17 ANODE[3] ANODE[3] CATHODE[6] CATHODE[6] 18 NO PIN NO PIN NO PIN NO PIN * W 8.38 0.25 (0.330 0.010) A PINS 2 & 17 HDSP-39xx XYY Z 6.1 MIN. (0.240) 1.02 (0.040) 0.38 (0.015) 2.54 0.25 (0.100 0.010) 15.24 0.25 (0.600 0.010) DATE CODE END VIEW NOTES: 1. DIMENSIONS IN MILLIMETERS AND (INCHES). 2. ALL UNTOLERANCED DIMENSIONS ARE FOR REFERENCE ONLY. 3. REDUNDANT ANODES. 4. UNUSED dp POSITION. 5. SEE INTERNAL CIRCUIT DIAGRAM. 6. REDUNDANT CATHODES. 7. FOR HDSP-420x/-860x SERIES PRODUCT ONLY. SIDE VIEW THE SIDE VIEW OF PACKAGE *INDICATES COUNTRY OF ORIGIN. Internal Circuit Diagram 1 18 1 17 2 16 3 15 4 5 14 5 13 6 13 6 7 12 7 12 7 11 8 11 8 11 8 10 9 10 9 10 9 18 1 17 2 16 3 15 4 14 5 13 6 7 12 8 a 2 f 3 b 4 5 6 9 g e c dp d A 3 a f b g e c dp d B 18 1 17 2 16 3 15 4 14 a f b g c e dp d C 18 a 17 f b g 16 15 14 e c 13 12 11 dp d D 10 Absolute Maximum Ratings AlGaAs Red HER Yellow Green HDSP-N150 HDSP-3900 HDSP-420x HDSP-860x Series Series Series Series Units 96 105 105 105 mW Peak Forward Current per Segment or DP 160[1] 135[3] 135[3] 90[5] mA DC Forward Current per 40[2] 40[4] 40[4] 30[6] mA -40 to +100 C Description Average Power per Segment or DP Segment or DP Operating Temperature Range Storage Temperature Range -20 to +100[7] -40 to +100 -55 to +100 C Reverse Voltage per Segment or DP 3.0 V Wave Soldering Temperature for 3 Seconds (1.60 mm [0.063 in.] below body) 250 C Notes: 1. See Figure 2 to establish pulsed conditions. 2. Derate above 55C at 0.8 mA/C. 3. See Figure 7 to establish pulsed conditions. 4. Derate above 50C at 0.73 mA/C. 5. See Figure 8 to establish pulsed conditions. 6. Derate above 50C at 0.54 mA/C. 7. For operation below -20C, contact your local Avago components sales office or an authorized distributor. 4 Electrical/Optical Characteristics at TA = 25C AlGaAs Red Device Series Parameter Luminous Intensity/Segment[1,2,5] Symbol Min. Typ. IV 6.0 Max. Units Test Conditions 14.0 mcd IF = 20 mA 1.8 V IF = 20 mA V IF = 100 mA (Digit Average) Forward Voltage/Segment or DP VF HDSPN15x 2.0 Peak Wavelength OPEAK Dominant Wavelength[3] Od Reverse Voltage/Segment or DP[4] VR 3.0 3.0 645 nm 637 nm 15 V Temperature Coefficient of VF /Segment or DP 'VF/C -2 mV/C Thermal Resistance LED Junction-to-Pin RTJ-PIN 430 C/W/ Seg IR = 100 PA High Efficiency Red Device Series HDSP390x 5 Parameter Symbol Min. Typ. Units Test Conditions 3350 7000 Max. Pcd 4800 Pcd IF = 100 mA Peak: 1 of 5 df IF = 20 mA Luminous Intensity/Segment[1,2] (Digit Average) IV Forward Voltage/Segment or DP VF 2.6 OPEAK 635 nm 626 nm 25 V Peak Wavelength Dominant Wavelength[3] Od Reverse Voltage/Segment or DP[4] VR 3.0 3.5 V Temperature Coefficient of VF /Segment or DP 'VF/C -2 mV/C Thermal Resistance LED Junction-to-Pin RTJ-PIN 375 C/W/ Seg IF = 100 mA IR = 100 PA Yellow Device Series HDSP420x Parameter Symbol Min. Typ. 2200 7000 Luminous Intensity/Segment[1,2] (Digit Average) IV Forward Voltage/Segment or DP VF 2.6 OPEAK 583 Peak Wavelength Dominant Wavelength[3,6] Reverse Voltage/Segment or DP [4] Max. 581.5 586 VR 3.0 Test Conditions Pcd IF = 100 mA Peak: 1 of 5 df IF = 20 mA Pcd 3400 Od Units 3.5 V IF = 100 mA nm 592.5 nm 25.0 V Temperature Coefficient of VF /Segment or DP 'VF/C -2 mV/C Thermal Resistance LED Junctionto-Pin RTJ-PIN 375 C/W/ Seg IR = 100 PA Green Device Series HDSP860x Parameter Symbol Min. Typ. Units Test Conditions 680 1500 Pcd IF = 10 mA 1960 Pcd IF = 50 mA Peak: 1 of 5 df Luminous Intensity/Segment[1,2] (Digit Average) IV Forward Voltage/Segment or DP VF 2.1 OPEAK 566 Od 571 Peak Wavelength Dominant Wavelength[3,6] Reverse Voltage/Segment or DP [4] VR 3.0 Max. 2.5 V IF = 10 mA nm 577 nm 50.0 V Temperature Coefficient of VF /Segment or DP 'VF/C -2 mV/C Thermal Resistance LED Junctionto-Pin RTJ-PIN 375 C/W/ Seg IR = 100 PA Notes: 1. Case temperature of the device immediately prior to the intensity measurement is 25C. 2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package. 3. The dominant wavelength, ld, is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of the device. 4. Typical specification for reference only. Do not exceed absolute maximum ratings. 5. For low current operation, the AlGaAs Red HDSP-N100 series displays are recommended. They are tested at 1 mA dc/segment and are pin for pin compatible with the HDSP-N150 series. 6. The Yellow (HDSP-420x) and Green (HDSP-860x) displays are categorized for dominant wavelength. The category is designated by a number adjacent to the luminous intensity category letter. 6 AlGaAs Red ! ! " ! ! " ! IDC MAX - MAXIMUM DC CURRENT PER SEGMENT - mA 50 45 40 35 AlGaAs RED 30 25 20 RJ-A = 525C/W 15 10 5 0 10 20 30 40 50 60 70 80 90 100 110 IF - FORWARD CURRENT PER SEGMENT - mA Figure 1. Maximum allowed peak current vs. pulse duration - AlGaAs Red. 200 180 160 140 AlGaAs RED 120 100 80 60 40 20 0 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 TA - AMBIENT TEMPERATURE - C VF - FORWARD CURRENT - V Figure 2. Maximum allowable DC current vs. ambient temperature. Figure 3. Forward current vs. forward voltage. 2.50 1.2 PEAK - RELATIVE EFFICIENCY (NORMALIZED TO 1 AT 20 mA) RELATIVE LUMINOUS INTENSITY (NORMALIZED TO 1 AT 20 mA) 2.25 2.00 1.75 1.50 1.25 AlGaAs RED 1.00 0.75 0.50 0.25 0 0 5 10 15 20 25 30 35 40 45 1.1 1.0 AlGaAs RED 0.9 0.8 0.7 50 0.6 IF - FORWARD CURRENT PER SEGMENT - mA Figure 5. Figure 4. Relative luminous intensity vs. DC forward current. 7 2 3 4 5 10 20 30 40 50 100 200 IPEAK - PEAK FORWARD CURRENT PER SEGMENT Figure 5. Relative efficiency (luminous intensity per unit current) vs. peak current. 5$7,22)0$;,08023(5$7,1*3($. &855(17727(03(5$785('(5$7(' 0$;,080'&&855(17 ,3($. ,0$; '& ,0$; '& +(5<(//2: *5((1 5 -$ &: *5((1 Figure 9. Forward current vs. forward voltage. U S HDN5(/$7,9(()),&,(1&< 3($. 1250$/,=('72$7P$)25+(5 $1'<(//2:$7P$)25*5((1 5(/$7,9(/80,1286,17(16,7< 1250$/,=('72$7P$)25+(5$1' <(//2:$7P$)25*5((1 <(//2: +(5 9)25:$5'92/7$*(9 ) Figure 8. Maximum allowable DC current vs. ambient temperature. *5((1 +(5$1' <(//2: ,)25:$5'&855(173(56(*0(17P$ ) Figure 10. Relative luminous intensity vs. DC forward current. 8 7$0%,(177(03(5$785(& $ Figure 7. Maximum allowed peak current vs. pulse duration - Green. ,)25:$5'&855(173(56(*0(17P$ ) ,0$;0$;,080'&&855(173(5 '& 6(*0(17P$ W38/6('85$7,216 3 Figure 6. Maximum allowed peak current vs. pulse duration - HER, Yellow. 23(5$7,21,1 7+,65(*,21 5(48,5(6 7(03(5$785( '(5$7,1* 2),0$; '& '&23(5$7,21 W38/6('85$7,216 3 = += + '&23(5$7,21 = N+ 23(5$7,21,1 7+,65(*,21 5(48,5(6 7(03(5$785( '(5$7,1* 2),0$; '& = N+ += N = + = N+ ,3($. += N 5$7,22)0$;,08023(5$7,1*3($. &855(17727(03(5$785('(5$7(' 0$;,080'&&855(17 HER, Yellow, Green *5((1 +(5 <(//2: ,3($.)25:$5'&855(17 3($. 3(56(*0(17P$ Figure 11. Relative efficiency (luminous intensity per unit current) vs. peak current. Intensity Bin Limits (mcd) Color Categories AlGaAs Red HDSP-N15x IV Bin Category Min. Max. Color J 6.14 11.20 Yellow Bin Dominant Wavelength (nm) Min. Max. 1 581.50 585.00 584.00 587.50 K 9.20 16.90 3 L 13.80 25.30 2 586.50 590.00 4 589.00 592.50 M 20.70 38.00 N 31.10 56.90 O 46.60 Green 85.40 Yellow HDSP-420x IV Bin Category Min. Max. C 2.23 4.09 D 3.35 6.14 E 5.02 9.21 F 7.53 13.82 G 11.30 20.72 H 16.95 31.08 I 25.43 46.62 2 573.00 577.00 3 570.00 574.00 4 567.00 571.00 5 564.00 568.00 Note: All categories are established for classification of products. Products may not be available in all categories. Please contact your Avago representatives for further clarification/information. Contrast Enhancement Green HDSP-860x IV Bin Category Min. Max. D 1.03 1.88 E 1.54 2.82 F 2.31 4.25 G 3.47 6.37 H 5.21 9.55 HDSP-390x IV Bin Category Min. Max. D 3.35 6.14 HER E 5.02 9.21 F 7.53 13.82 G 11.30 20.72 H 16.95 31.08 I 25.43 46.62 For product information and a complete list of distributors, please go to our website: For information on contrast enhancement, please see Application Note 1015. Soldering/Cleaning Cleaning agents from the ketone family (acetone, methyl ethyl ketone, etc.) and from the chlorinated hydrocarbon family (methylene chloride, trichloro- ethylene, carbon tetrachloride, etc.) are not recommended for cleaning LED parts. All of these various solvents attack or dissolve the encapsulating epoxies used to form the package of plastic LED parts. For information on soldering LEDs, please refer to Application Note 1027. www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright (c) 2005-2011 Avago Technologies. All rights reserved. Obsoletes 5988-1737EN AV02-2551EN - January 27, 2011