THE INFORMATION CONTAINED HEREIN IS CONSIDERED EEL Fe AND SL NST RE ST PIN is] Cal 7S PINOT Co Ronis PIN 17|PIN 18] COLOR | PIN 19|PIN 20] COLOR WRITTEN APPROVAL OF BEL FUSE INC. + YELLUW + ORANGE = + GREEN ELECTRICAL CHARACTERISTICS @ 25C 7 LED 1 SCHEMATIC TURNS RATIO SS TPe 1CT : 1CT 42% OCL @ 100kHz/100mVRMS 18 1CT 1 1CT FOR CHANNEL 1 AND CHANNEL 2 TRDI+ 11 ho! bid =|1 TRPI+ 1imA DC BIAS 350uH MIN, TRCT! 12 ar | he eee to IEEE 802.3at specification TRDI- 10 aN, us | /2 TRPI- O.1MHz TO 1MHz -1,1 dB MAX TRD2+ LCT + ICT L, |/3 TRPe+ 1MHz TO 65MHz -0.8 dB MAX pues big 65MHz TO 100MHz -1,2 dB MAX TRCT2 arr ile l RET, LOSS <MIND TRD2- ery >> =/6 TRP2- 0,5MHz-40MHz -18 oB 40MHz-100MHz -12+20LOGF/80MHz) dB 5 5/4 CM TO CM REJ 100kHz - 100MHz -30 oB MIN | CM TO DM REJ 5 100kHz - 100MHz -35 oB MIN HIPOT <Isolation Voltage 2250 VDC 3-3 5-7 100% OF PRODUCTION TESTED TO COMPLY WITH IEEE 802.3 ISOLATION REQUIREMENTS. BALANCED DC LINE CURRENT 720 mA MAX. @ 57 VDC CONTINUOUS 8 12 A MAX, @ 57 VDC FOR 200 MILLISECONDS VCie 13 |_| LED 1 VC36 14 4X 2@nF oa VF (FORWARD VOLTAGED IF=20mA YELLOW2.1V TYP, VESR 12 100V eh, DOMINANT WAVELENGTH) IF=20mA YELLUW590nm TYP, 19 ~ 4X 75 OHMS \ VF (FORWARD VOLTAGE IF=20mA GREEN 22V TYP, GREEN ORANGE 10000F 2kV \ P r ORANGE 2,0V TYP, 20 N AD <DOMINANT WAVELENGTH) IF=20mA GREEN 570nm TYP. LED 2 SHIELD 77/7 ORANGE 610nm TYP, OPERATING TEMPERATURE: -40C TO 85C - | 5 REV. : PAGE : ORIGINATED BY TITLE PART NO. / DRAWING NO. |gTANDARD DIM. [ ] METRIC DIM. CHOW WANCHUNG 10/100 MagJack TOL. IN INCH AS REF. b [ DATE 2016-08-11 08261X1TGJ-F @ MAGNETIC ORAWN BY CPoEp, Extended Temperature) TLE NAME x UNIT : INCH [mm] : SOLUTIONS SKY YOU 0826-1X1T-GJ-F xx | 7 |SCALE : N/A = bel gon DATE 2016-08-11 PATENTED OSeSlX1TGJ-F_D.DWG [ey t=} size: a4 DC002(2)120214 This document is electronically generated. This is a controlled copy if used internallyCOPIED, REPRODUCED OR DISCLOSED WITHOUT THE THE INFORMATION CONTAINED HEREIN IS CONSIDERED "PROPRIETARY? TO BEL FUSE INC, AND SHALL NOT BE MECHANICAL SPECIFICATION RoHS Lf WRITTEN APPROVAL OF BEL FUSE INC, << { on, 0,05520,020 cin ia eg [1.4030.51] ne a LED 2 _ 0,642 ts R BI-COLOR [16,311 gaol - 1290 [32,77] cat GREEN/ORANGE < 4 LED 1 Oui \ YELLOW oO Wo m ac, po Ine Oo a 3o bel wo} qd = S wo Om q a ox | ___) Y Be St v H d ov > hore ! jw | f 0,500 i } ner - 0,305 [7.75] NOTES: 0.125 [317] HH BBE PLASTIC HOUSING: THERMOPLASTIC PA, BLACK OSe0 teia] poole CONTACTS! 50 MICRO-INCH HARD GOLD PLATING OR EQUIVALENT. 0.700 [17.78] 30 MICRO-INCH MIN NICKEL UNDERPLATE. 0.800 [20,32] + OUTPUT PINS: TIN-COATED COPPER WIRE, DIA 0.016 AND DIA 0.018 INCH, 2 THE PRODUCT IS RoHS CUMPLIANT. 100 MICRO-INCH MIN MATTE TIN, PINS ARE SOLDER DIPPED. 3, JACK CAVITY CONFORMS TO FCC RULES AND REGULATIONS, METAL SHIELD: = NICKEL PLATED ON COPPER ALLDY, 4, THE PRODUCT IS PATENTED, THE PATENT NUMBER IS (ALL GROUND LEADS ARE SOLDER DIPPED) US, PAT, 7,123,117, LL] MARK PART WITH MFG LOGO, MFG NAME. PART NUMBER, > THE SUGGESTED PEAK WAVE SOLDERING CONDITION IS DATE CODE AND PATENTED. 260C MAX AND 10 SECONDS MAX, cSAkus UL RECOGNIZED - FILE #196366 AND E169987, REV. : D |PAGE: 3 ORIGINATED BY TITLE PART NO. / DRAWING NO. |sTanpARD DIM| [ ] METRIC DIM. ANTON LIAQ 10/100 MagJack TOL. IN INcH| AS REF. DATE 2016-08-11 (PoED, Extended T ture) |___08261X1TGJ-F e MAGNETIC DRAWN BY ee Eee MPEP ONES ALE NAME Xx UNIT_: INCH [mm] SOLUTIONS JESSE LI 0826-1X1T-GJ-F | XX SCALE : N/A a bel group pate 2016-08-11 PATENTED O8CO1XITGI-F_DDWG | eT oto 4 | size : 4 DC002(2)120214 This document is electronically generated. This is a controlled copy if used internallyTHE INFORMATION CONTAINED HEREIN IS CONSIDERED PROPRIETARY TO BEL FUSE INC, AND SHALL NOT BE COPIED, REPRODUCED OR DISCLOSED WITHOUT THE WRITTEN APPROVAL OF BEL FUSE INC, RoHS RECOMMENDED PCB FOUTPRINT COMPONENT SIDE VIEW Boag 35 8 fx 0.635 1 8 | _ 0.702 [17.83] = a=- PSN Vo Fogg [16,13] a won oe MS Oh 0.472 [11,99] 4 km a 5 8B oO & a. 9,000 _ Sout Hoo eo [12.70] OQ Oo oO Oo oO ' sS8&3% 0.0675 [1.71] on Soo S$ B8z t coos 20,062 [91,57] L ao 2 PLACES @ 90.128 [3,25] OD OD Ty pe 2 PLACES oO <p. on ' NA 0.440 [11.18] OV 3 | ~||+ 0,030 10,761 1 15 16 rs - oO 4 ib 13 es 0.516 [13.11] 4 wy 0.050 +0,005 +013 ; | ni (ev. 90,035*0.005 | 0.897843 1231456, 10 PLACES Y)+++loo 4189 | Cle oe *. O| Ma 0.000 Ve 0.00 0.040 [1,02] 4 PL NOTES 0,080 [2.03] PITCH THE SHADED AREA ON THE CUSTOMER BOARD ARE 0.280 [7113 RECOMMENDED TO BE CLEAR OFF ANY VIA HOLE OR 0.480 [1219] COMPONENT PAD, REV. : D |PAGE: 4 ORIGINATED BY TITLE PART NO. / DRAWING NO. |sTaNDARD DIM| [ ] METRIC DIM. ANTON LIAQ 10/100 MagJack TOL. IN INCH| AS REF. pate 2016-08-11 (PoEp, Extended Temperature) O8e61X1T GIF UNIT : INCH @ MAGNETIC x : [mm] DRAWN BY _ ei FILE NAME SOLUTIONS JESSE U1 SEB ATENTED 08261X1TGJ-F_D.DWG [= ae abel group DATE 2016-08-11 PATENTED xx | 0004 /O-= 4] suze : a4 DC002(2)120214 This document is electronically generated. This is a is a controlled copy if used internallyTHE INFORMATION CONTAINED HEREIN IS CONSIDERED PROPRIETARY TO BEL FUSE INC. AND SHALL NOT BE COPIED, REPRODUCED OR DISCLOSED WITHOUT THE WRITTEN APPROVAL OF BEL FUSE INC. SUGGESTED PANEL DPENING METAL PANEL | 0672 [17,07] -* ML 0.080 [2.03] 0.561 [14.25] ~ a 0.551 [14.00] -= oN gS N N N NOTE: THE DISTANCE OF PANEL INSIDE SURFACE RELATIVE TO FRUNT SURFACE UF PART IS ONLY A SUGGESTIO IN CASE THIS DISTANCE IS DIFFERENT, THE REQUIRED PANEL UPENING DIMENSIONS CHANGE ACCORDINGLY. PACKING INFORMATION PACKING TRAY : 0200-9999-F6 CTUOP) 0200-9999-F7 CBOTTUOM) PACKING QUANTITY : 40 PCS FINISHED GOODS PER TRAY 10 TRAYS 400 PCS FINISHED GUUDS>) PER CARTON BUX NOTE + CARDBOARDS ARE PLACED BETWEEN LAYERS OF PACKING TRAY INSIDE CARTON BOX CINCLUDE THE UPPERMOST AND LOWERMOST TRAY) N. RoHS REV. : |pacE: = 5 ORIGINATED BY TITLE PART NO. / DRAWING NO. |sranpaRp DIM] [ ] METRIC DIM. ANTON LIAQ 10/100 MagJack TOL. IN INCH AS REF. . DATE 016-08-11 (PoEp, Extended Temperature? O8eO1XITGITF UNIT : INCH [mm] e MAGNETIC DRAWN BY FILE NAME Lx SOLUTIONS VESSE Ul SE BATENTED 08261X1TGJ-F_D.DWG F& Te bel group DATE 2016-08-11 PATENTED xxx | 0004 }@-+|size : a4 DC002(2)120214 This document is electronically generated. This is a controlled copy if used internally