DPP Series 15-100W, 5-48V Output DIN Rail Mount Power Supplies Low Cost 5V to 48V Outputs Universal Input Compact Size NEC NFPA70 Class 2(2) UL508 Listed Class 1, Division 2 (ISA 12.12)(3) -10 to +71C Operation Convection Cooled Specifications MODELS ITEMS AC Input Voltage range VAC Input Frequency DC Input Voltage range Inrush Current (115 / 230VAC) Power Factor Input Current (230VAC) Leakage Current Output Voltage Accuracy Line Regulation Load Regulation Ripple and Noise Overcurrent Protection (Typ) Overvoltage Protection Hold Up Time (115VAC input) Parallel switch LED Indicator Operating Temperature Storage Temperature Operating Humidity Cooling (1) Withstand Voltage Shock Vibration Isolation Resistance Safety Agency Approvals Emissions Immunity Hz A A mA % % % mV V ms - Weight (Typ) Size (WxHxD) Case material MTBF (MIL-HDBK-217F, GF25) Warranty g in Hours - (1) (2) (3) DPP15 DPP25/30 DPP50 85 - 264VAC DPP100 85 - 132VAC 176 - 264VAC 47 - 63Hz 90 - 375VDC 210 - 375VDC <35A 35 / 45A 35 / 50A 35 / 55A Meets EN61000-3-2 Class A 0.4 0.72 1.35 2.2 <0.75mA, 265VAC, 63Hz 1% (24V outputs preset at 24.5V) < 0.5% < 0.5% 50mV >110% (fold forward type) 120 - 137.5%, Cycle AC line to reset > 20ms No Yes Green LED = On -10 to +71C (Derate linearly 5%/C from 61 to 71C) -25 to +85C 20 - 90% RH (non condensing) Convection Input to Output 3kVAC for 1 min. Half sine wave, 4G, 22ms, 3 times per face, X, Y, Z 10-500Hz (20 min sweep) 0.002G2/Hz, 1 Grms acceleration X, Y, Z, 1 hour >100M at 25C & 70%RH, Output to Ground 500VDC UL60950-1, UL508, NEC Class 2(2), EN60950-1, CE Mark, ISA 12.12(3) EN55011, EN55022 class B Radiated & Conducted, EN61000-6-3 EN61000-6-2, EN61000-4-2 Level 4, EN61000-4-3, EN61000-4-6 Level 3, EN61000-4-4 Level 4 (I/P) Level 3 (O/P), EN61000-4-5 Level 4, EN61000-4-8, EN61000-4-11 130 260 390 0.9x2.95x3.81" 1.77x2.95x3.58" 2.86x2.95x3.81" Plastic 287,000 >288,000 269,000 239,000 Two years Recommend 1" clearance on all sides. See model selector. Evaluated to NEC NFPA70 Class 2 output per UL1310. See model selector. 3055 Del Sol Blvd * San Diego, CA 92154 * 1-800-LAMBDA-4 25 DPP Series Model Selector Model DPP25-5 DPP30-12 DPP50-15 DPP15-24 DPP30-24 DPP50-24 DPP100-24 DPP50-48 Voltage (V) Voltage Adjust (V) 5 12 15 24 24 24 24 48 5-6 9.9-12.1 11.9-15.1 22.5-28.5 22.5-28.5 22.5-28.5 22.5-28.5 48-56 DPP15 Outline Current (A) 5.0 2.5 3.4 0.63 1.3 2.1 4.2 1.05 Power (W) Effic. (typ) % 25 30 50 15 30 50 100 50 78 83 85 81 84 86 87 87 UL1310 Class 2 Yes Yes Yes Yes Yes Yes ISA12.12 Class 1 Div 2 Yes Yes Yes Yes Yes Yes DPP100 Outline DPP25-DPP50 Outline Installation: Snap-on Mounting - snap onto DIN Rail TS35/7.5 or TS35/15. (No tools required) Cooling - Normal Convection Clearance - 25mm all sides Connection - Use copper wire 0.5-2.5mm2 (AWG24-12) Other DIN Rail Products DSP/DPP DLP DLP-PU R Series 10W to 480W power supplies 75W to 240W power supplies Redundancy Module (20A) 3A to 30A single & three phase EMI Filters For Additional Information, please visit us.tdk-lambda.com/lp/products/dpp-series.htm 26 3055 Del Sol Blvd * San Diego, CA 92154 * 1-800-LAMBDA-4 Revision B3: Jan 2010