www.vishay.com For technical questions, contact: efi@vishay.com Document Number: 61002
26 Revision: 07-Mar-08
CC3
Vishay Electro-Films
Thin Film 0505 Size Resistor on Alumina
CHIP
RESISTORS
The CC3 series single-value resistor chips offer a relatively
small size, low shunt capacitance and solder pad option. The
CC3s nichrome resistor material offers excellent stability.
The CC3s are manufactured using Vishay Electro-Films
(EFI) sophisticated thin film equipment and manufacturing
technology. The CC3s are 100 % electrically tested and
visually inspected to MIL-STD-883.
FEATURES
Wire bondable
Chip size: 0.050 inches square
Resistance range: 30 Ω to 125 kΩ
Alumina substrate
Low stray capacitance: < 0.2 pF
Resistor material: Nichrome
Resistor passivation coat optional
Tolerances to 0.05 %
Solder pad optional
APPLICATIONS
Vishay EFI CC3 chip resistors provide excellent high-frequency response and are ideally suited for prototyping.
Typical application areas are:
Amplifiers
Oscillators
Attenuators
Couplers
Filters
Recommended for hermetic environments where die is not exposed to moisture.
Product may not
be to scale
TEMPERATURE COEFFICIENT OF RESISTANCE, VALUES AND TOLERANCES
30 Ω75 Ω100 Ω40 kΩ125 kΩ
± 100 ppm/°C
± 50 ppm/°C
± 25 ppm/°C
0.05 %0.1 %
Tightest Standard Tolerance Available
± 10 ppm/°C
STANDARD ELECTRICAL SPECIFICATIONS
PARAMETER
Noise, MIL-STD-202, Method 308 - 20 dB typ.
Moisture Resistance, MIL-STD-202
Method 106 - Hermetic Applications ± 0.2 % max. ΔR/R
Stability, 1000 h, + 125 °C, 100 mW ± 0.1 % max. ΔR/R
Operating Temperature Range- 55 °C to + 125 °C
Thermal Shock, MIL-STD-202,
Method 107, Test Condition F ± 0.25 % max. ΔR/R
High Temperature Exposure, + 150 °C, 100 h ± 0.1 % max. ΔR/R
Dielectric Voltage Breakdown 400 V
Insulation Resistance 1012 min.
Operating Voltage100 V
DC Power Rating at + 125 °C (Derated to Zero at + 150 °C) 100 mW max.
5 x Rated Power Short-Time Overload, + 25 °C, 5 s ± 0.25 % max. ΔR/R
Document Number: 61002 For technical questions, contact: efi@vishay.com www.vishay.com
Revision: 07-Mar-08 27
CC3
Thin Film 0505 Size Resistor on Alumina
Vishay Electro-Films
CHIP
RESISTORS
DIMENSIONS in inches
SCHEMATIC
Options: Terminations: Aluminum, Nickel solder (62/32)
Gold back for solder die attach
Contact Applications Engineer
0.050
0.010
0.044
0.050
MECHANICAL SPECIFICATIONS in inches
PARAMETER
Chip Size 0.050 x 0.050 ± 0.003 (1.27 x 1.27 ± 0.076 mm)
Chip Thickness 0.010 ± 0.002 (0.25 ± 0.05 mm)
Chip Substrate Material 99.6 % alumina, 2 - 4 microinch finish
Resistor Material Nichrome
Bonding Pad Size 0.010 x 0.044 (0.254 x 0.117 mm) minimum
Number of Pads 2
Pad Material 25 kÅ minimum gold standard
Backing None
ORDERING INFORMATION
Example: 100 % visual, 50 Ω, ± 10 %, ± 50 ppm/°C TCR, gold terminations
W
INSPECTION
/PACKAGING
W = 100 % visually inspected
parts in matrix tray per
MIL-STD-883
X = Sample, commercial
visually inspected parts
loaded in matrix trays (4 % AQL)
CC3
PRODUCT
FAMILY
5000
RESISTANCE
VALUE
Use first 4
significant digits
of resistance
B
MULTIPLIER
CODE
B = 0.01
A = 0.1
0 = 1
1 = 10
2 = 100
K
TOLERANCE
CODE
A = 0.05 %*
B = 0.1 %*
C = 0.25 %*
D = 0.5 %
F = 1.0 %
G = 2.0 %
J = 5.0 %
K = 10 %
*Coating standard
D
TCR
A = ± 10 ppm/°C
B = ± 25 ppm/°C
D = ± 50 ppm/°C
E = ± 100 ppm/°C
G
TERMINATIONS
G = Gold
S = Solder
Document Number: 91000 www.vishay.com
Revision: 18-Jul-08 1
Disclaimer
Legal Disclaimer Notice
Vishay
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.