IEC Connectors 319
IEC Connectors
Power Entry Modules
With over 26,000 combinations Bulgin’s mains power entry modules
oer a very adaptable and exible solution to panel design.
Power entry modules allow combinations of mains inlets and outlets,
ltered inlets, switches, fuseholders, voltage selectors and indicators
mounted in either horizontal or vertical format bezels ready for quick
snap-t assembly. The compact design occupies the minimum of panel
area and a single rectangular mounting hole, oering easy installation for
this mains power entry module.
Our range oers a ange xing alternative for designers who prefer the
security of screw xing. All types and variations are available through
Bulgin’s extensive distribution network.
320 IEC Connectors
IEC Connectors
Power Entry Modules
Components used in Power Entry Modules.
Note: Components are Approved Individually (where applicable). Please see individual
component pages for full specications.
IEC Connectors Fuseholders and Voltage Selectors
Type
DX0928
FX0359
PF0011
PF0033
PX0575
PX0595
PX0695
PX0783
PX0598
VS0001
Description
Neon Indicator
5 x 20mm Fuseholder
C14 Power Inlet with Integral 5 x 20mm
Fuseholder
C14 Power Inlet with Integral twin 5 x 20mm
Fuseholder
C14 Power Inlet, Cold condition
C16 Power Inlet, Hot Condition
Sheet F Power Outlet
Sheet F Shuttered Power Outlet
C20 Power Inlet
Voltage Selector marked 120/240V
Rating
110V or 250V a.c./d.c. working
Max. rating 10A. 250V
See Page 192
Max. rating 10A. 250V a.c.
See Page 136
Max. rating 10A. 250V a.c.
See Page 137
Max. rating 10A. 250V a.c.
See Page 132
Max. rating 10A. 250V a.c.
See Page 138
Max. rating 10A. 250V a.c.
See Page 145
Max. rating 10A. 250V a.c.
See Page 146
Max. rating 16A, 250V a.c.
See Page 148
Max. rating 6.3A. 120/240V a.c.
See Page 114
Approvals
Switches and Indicators
No Poles
Single Pole
Double Pole
For Mini Bezel:
Single Pole
Double Pole
Indicator
Non-illuminated
High Inrush
Illuminated
Non-illuminated
High Inrush
Illuminated
Non-illuminated
Illuminated
Non-illuminated
High Inrush
Illuminated
Max. rating 16A Resistive, 4A Inductive, 250Vac.
Max. rating 16A Resistive, 4A Inductive, 250Vac.
Inrush current, 150A to IEC65.
Max. rating 16A Resistive, 4A Inductive, 250Vac.
Max. rating 16A Resistive, 4A Inductive, 250Vac.
Max. rating 16A Resistive, 4A Inductive, 250Vac.
Inrush current, 150A to IEC65.
Max. rating 16A Resistive, 4A Inductive, 250Vac.
250Vac Neon.
Max. rating 10A Resistive, 4A Inductive, 250Vac.
Max. rating 10A Resistive, 4A Inductive, 250Vac.
250Vac Neon.
Max. rating 10A Resistive, 4A Inductive, 250Vac.
Max. rating 10A Resistive, 4A Inductive, 250Vac.
Inrush current, 85A to EN61058-1.
Max. rating 10A Resistive, 4A Inductive, 250Vac.
250Vac Neon.
250Vac neon lamp connected internally to
terminals.
Illumination Circuit ApprovalsCurrent Ratings
RoHS Power Entry Module range and all components are compliant
*Filtered options for 6.3mm tag versions only
15
15
15
15
15
15
15
15
15
15
15
15
IEC Connectors 321
IEC Connectors
Power Entry Modules
Overview of Power Entry Modules
Style C14 C14 Fused C16 C20 Sheet F
Inlet/ Outet Combinations
C14 C14 Fused
OutletsInlets
Snap to Panel
Vertical
With Single Pole
switch
Page 163
With other
components
Pages 164,
165, 166
With Single Pole
switch
Page 161
With Double Pole
Switch
Page 162
With Single
Pole switch
Page 163
With other
components
Pages 164,
165, 166
With Single Pole
switch
Page 167
With Single Pole
switch
Page 169
With other
components
Page 168
Snap to Panel
Horizontal
Mini Bezel
With Single Pole
Switch Page 175
Mini Bezel
With Double Pole
Switch Page 175
With Single Pole
switch Page 170
With Double Pole
Switch Page 171
With Single Pole
switch Page 177
With Double
Pole switch
Page 173
No additional
components
Page 174
Flange Mount -
Vertical
With Single Pole
switch Page 176
With Double Pole
switch Page 177
322 IEC Connectors
IEC Connectors
C14 IEC Fused Inlet - Vertical
Vertical Module Arrangement
BZV01/Z0000/01
Fused Inlet with 2.8mm or
6.3mm tags
Single Pole Switch Variations
Filtered Inlet Option
Options of I/O marked
switches
BZV XX XXXXX XX
Type of Inlet / Outlet
Single Fused C14 Power Inlet (cold condition),
6.3 or 2.8mm tabs:
01 = PF0011/63
02 = PF0011/28
Twin Fused C14 Power Inlet (cold condition),
6.3 or 2.8mm tabs:
15 = PF0033/63
16 = PF0033/28
Filtered or Non Filtered Inlet
Z0000 = Non Filtered
Axxxx = Standard
For Filtered inlet use 6th to 9th characters from lter
ordering code see pages 179 -180
E.g. BZV01/A0620/01
Filtered or Non Filtered Inlet
Single Pole Switch:
01 = S.P. Switch
Single Pole Neon Switch:
02 = S.P. Red Neon Switch
08 = S.P. Green Neon Switch
Neon Indicator:
03 = Red Neon Indicator
Single Pole High Inrush Switch:
46 = S.P. High Inrush Switch
Single Pole Switch Marked I/O:
69 = S.P. Switch (I/O)
Single Pole Neon Switch Marked (I/O):
71 = S.P. Red Neon Switch (I/O)
74 = S.P. Green Neon Switch (I/O)
Single Pole High Inrush Switch Marked (I/O):
98 = S.P. High Inrush Switch (I/O)
How to order -
IEC Connectors 323
IEC Connectors
C14 IEC Fused Inlet - Vertical
Vertical Module Arrangement
BZV01/Z0000/10
Fused Inlet with 2.8mm or
6.3mm tags
Double Pole Switch or
Indicator Variations
Filtered Inlet Option
Options of I/O marked
switches
Type of Inlet / Outlet
Single Fused C14 Power Inlet (cold condition),
6.3 or 2.8mm tabs:
01 = PF0011/63
02 = PF0011/28
Twin Fused C14 Power Inlet (cold condition),
6.3 or 2.8mm tabs:
15 = PF0033/63
16 = PF0033/28
Filtered or Non Filtered Inlet
Z0000 = Non Filtered
Axxxx = Standard
For Filtered inlet use 6th to 9th characters from lter
ordering code see pages 179-180
E.g. BZV01/A0620/10
Combination of Other Components
Neon Indicator:
D3 = Red Neon Indicator
Double Pole Switch:
10 = D.P. Switch
Double Pole Neon Switch:
11 = D.P. Red Neon Switch
12 = D.P. Green Neon Switch
Double Pole High Inrush Switch:
13 = D.P. High Inrush Switch
Double Pole Switch Marked I/O:
70 = D.P. Switch (I/O)
Double Pole Neon Switch Marked (I/O):
76 = D.P. Red Neon Switch (I/O)
77 = D.P. Green Neon Switch (I/O)
Double Pole High Inrush Switch Marked
(I/O):
78 = D.P. High Inrush Switch (I/O)
B1 = D.P. High Inrush Green Neon Switch
(I/O)
How to order -
BZV XX XXXXX XX
324 IEC Connectors
IEC Connectors
C14 and C16 IEC Inlet - Vertical
Vertical Module Arrangement
BZV03/Z0000/02
Inlet with 2.8mm or 6.3mm tags
Single Pole Switch or Neon
Indicator Variations
Filtered Inlet Option
Options of I/O marked
switches
Non Fused
Type of Inlet / Outlet
C14 Power Inlet (cold condition), 6.3 or 2.8mm
tabs:
03 = PX0575/63
04 = PX0575/28
C16 Power Inlet (hot condition), 6.3 or 2.8mm
tabs:
05 = PX0595/63
06 = PX0595/28
Please note type 05 and 06 are not available in
ltered version
Filtered or Non Filtered Inlet
Z0000 = Non Filtered
Axxxx = Standard
For Filtered inlet use 6th to 9th characters from
lter ordering code see page 178
E.g. BZV03/A0120/02
Combination of Other Components
Single Pole Switch:
01 = S.P. Switch
Single Pole Neon Switch:
02 = S.P. Red Neon Switch
08 = S.P. Green Neon Switch
Neon Indicator:
03 = Red Neon Indicator
Single Pole High Inrush Switch:
46 = S.P. High Inrush Switch
Single Pole Switch Marked I/O:
69 = S.P. Switch (I/O)
Single Pole Neon Switch Marked (I/O):
71 = S.P. Red Neon Switch (I/O)
74 = S.P. Green Neon Switch (I/O)
Single Pole High Inrush Switch Marked
(I/O):
98 = S.P. High Inrush Switch (I/O)
How to order -
BZV XX XXXXX XX
IEC Connectors 325
IEC Connectors
C14 and C16 IEC Inlet - Vertical
Vertical Module Arrangement
BZV03/Z0000/07
Inlet with 2.8mm or 6.3mm tags
Double Pole Switch/
Fuseholder/Indicator/
Voltage Selectors/
Blanking Plate
Filtered Inlet Option
Options of I/O marked switches
Type of Inlet / Outlet
C14 Power Inlet
(cold condition),
6.3 or 2.8mm tabs:
03 = PX0575/63
04 = PX0575/28
C16 Power Inlet (hot
condition), 6.3 or
2.8mm tabs:
05 = PX0595/63
06 = PX0595/28
Please note type 05
and 06 are not
available in
ltered version
Filtered or Non Filtered Inlet
Z0000 = Non Filtered
Axxxx = Standard
For Filtered inlet use 6th
to 9th characters from lter
ordering code see page 178
E.g. BZV03/A0120/07
Twin Fuseholder and Double Pole
Switch:
05 = 2 x FX0359 + D.P. Switch
Twin Fuseholder and Double Pole Neon
Switch:
06 = 2 x FX0359 + D.P. Red Neon
Switch
09 = 2 x FX0359 + D.P. Green Neon
Switch
19 = 2 x FX0359 + D.P. Red Neon
Switch 125V
Twin Fuseholder and Neon Indicator:
07 = 2 x FX0359 + Red Neon
Indicator
Voltage Selector, Fuseholder and Double
Pole Switch:
15 = 1 x VS0001 + 1 x FX0359 +
Double Pole switch
Voltage Selector, Fuseholder and Double
Pole Neon Switch:
16 = 1 x VS0001 + 1 x FX0359 + D.P.
Red Neon Switch
18 = 1 x VS0001 + 1 x FX0359 + D.P.
Green Neon Switch
Voltage Selector, Fuseholder and Neon
Indicator:
17 = 1 x VS0001 + 1 x FX0359 + Red
Neon Indicator
Twin Fuseholder and Double Pole High
Inrush Switch:
20 = 2 x FX0359 + D.P. High Inrush
Switch
Twin Fuseholder and Double Pole High
Inrush Neon Switch:
21 = 2 x FX0359 + 1 x D.P. High
Inrush Green Neon Switch
22 = 2 x FX0359 + 1 x D.P. High
Inrush Red Neon Switch
Voltage Selector, Neon Indicator and
Double Pole Switch
25 = 1 x VS0001 + 1 x
DX0928/110V/Red + D.P. Switch
26 = 1 x VS0001 + 1 x
DX0928/110V/Green + D.P. Switch
27 = 1 x VS0001 + 1 x
DX0928/250V/Red + D.P. Switch
28 = 1 x VS0001 + 1 x
DX0928/250V/Green + D.P. Switch
Voltage Selector, Neon Indicator and
Double Pole High Inrush Switch:
29 = 1 x VS0001 + 1 x
DX0928/250V/Red + D.P. High Inrush
Switch
30 = 1 x VS0001 + 1 x
DX0928/250V/Green + D.P. High
Inrush Switch
Fuseholder, Neon Indicator and Double
Pole Switch
31 = 1 x FX0359 + 1 x
DX0928/110V/Red + D.P. Switch
32 = 1 x FX0359 + 1 x
DX0928/110V/Green + D.P. Switch
33 = 1 x FX0359 + 1 x
DX0928/250V/Red + D.P. Switch
34 = 1 x Fx0359 + 1 x
DX0928/250V/Green + D.P. Switch
Fuseholder, Neon Indicator and Double
Pole High Inrush Switch:
35 = 1 x FX0359 + 1 x
DX0928/250V/Red + D.P. High Inrush
Switch
36 = 1 x FX0359 + 1 x
DX0928/250V/Green + D.P. High
Inrush Switch
Fuseholder, Blanking Plate and Double
Pole High Inrush Neon Switch:
47 = 1 x FX0359 + 1 x Blanking Plate
(Right) + D.P. High Inrush Green Neon
Switch
Fuseholder, Blanking Plate and Double
Pole Switch:
48 = 1 x FX0359 + 1 x Blanking Plate
(Right) + D.P. Switch
How to order -
BZV XX XXXXX XX
Combination of Other Components
326 IEC Connectors
IEC Connectors
C14 and C16 IEC Inlet - Vertical
Vertical Module Arrangement
BZV03/Z0000/07
Inlet with 2.8mm or 6.3mm
tags
Double Pole Switch/
Fuseholder/Indicator/
Voltage Selectors/
Blanking Plate
Filtered Inlet Option
Options of I/O marked
switches
Type of Inlet / Outlet
C14 Power Inlet (cold
condition), 6.3 or 2.8mm
tabs:
03 = PX0575/63
04 = PX0575/28
C16 Power Inlet (hot
condition), 6.3 or 2.8mm
tabs:
05 = PX0595/63
06 = PX0595/28
Please note type 05 and
06 are not available in
ltered version
Filtered or Non Filtered Inlet
Z0000 = Non Filtered
Axxxx = Standard
For Filtered inlet use 6th to 9th
characters from lter ordering
code see page 178
E.g. BZV03/A0120/07
Twin Fuseholder and Double Pole Switch
Marked (I/O):
72 = 2 x FX0359 + D.P. Switch (I/O)
Twin Fuseholder and Double Pole Neon
Switch Marked (I/O):
73 = 2 x FX0359 + D.P. Red Neon
Switch (I/O)
75 = 2 x FX0359 + D.P. Green Neon
Switch(I/O)
82 = 2 x FX0359 + D.P. Red Neon
Switch 125V(I/O)
Voltage Selector, Fuseholder and Double
Pole Switch Marked (I/O):
79 = 1 x VS0001 + 1 x FX0359 +
Double Pole switch (I/O)
Voltage Selector, Fuseholder and Double
Pole Neon Switch Marked (I/O):
80 = 1 x VS0001 + 1 x FX0359 + D.P.
Red Neon Switch (I/O)
81 = 1 x VS0001 + 1 x FX0359 + D.P.
Green Neon Switch (I/O)
Twin Fuseholder and Double Pole High
Inrush Switch Marked (I/O):
83 = 2 x FX0359 + D.P. High Inrush
Switch (I/O)
Twin Fuseholder and Double Pole High
Inrush Neon Switch Marked (I/O):
84 = 2 x FX0359 + 1 x D.P. High
Inrush Green Neon Switch (I/O)
85 = 2 x FX0359 + 1 x D.P. High
Inrush Red Neon Switch (I/O)
Voltage Selector, Neon Indicator and
Double Pole Switch Marked (I/O):
86 = 1 x VS0001 + 1 x
DX0928/110V/Red + D.P. Switch (I/O)
87 = 1 x VS0001 + 1 x
DX0928/110V/Green + D.P. Switch
(I/O)
88 = 1 x VS0001 + 1 x
DX0928/250V/Red + D.P. Switch (I/O)
89 = 1 x VS0001 + 1 x
DX0928/250V/Green + D.P. Switch
(I/O)
Voltage Selector, Neon Indicator and
Double Pole High Inrush Switch Marked
(I/O):
90 = 1 x VS0001 + 1 x
DX0928/250V/Red + D.P. High Inrush
Switch(I/O)
91 = 1 x VS0001 + 1 x
DX0928/250V/Green + D.P. High
Inrush Switch(I/O)
Fuseholder, Neon Indicator and Double
Pole Switch Marked (I/O)
92 = 1 x FX0359 + 1 x
DX0928/110V/Red + D.P. Switch (I/O)
93 = 1 x FX0359 + 1 x
DX0928/110V/Green + D.P. Switch
(I/O)
94 = 1 x FX0359 + 1 x
DX0928/250V/Red + D.P. Switch (I/O)
95 = 1 x FX0359 + 1 x
DX0928/250V/Green + D.P. Switch
(I/O)
Fuseholder, Neon Indicator and Double
Pole High Inrush Switch Marked (I/O):
96 = 1 x FX0359 + 1 x
DX0928/250V/Red + D.P. High Inrush
Switch (I/O)
97 = 1 x FX0359 + 1 x
DX0928/250V/Green + D.P. High
Inrush Switch (I/O)
Fuseholder, Blanking Plate and Double
Pole High Inrush Neon Switch Marked
(I/O):
99 = 1 x FX0359 + 1 x Blanking Plate
(Right) + D.P. High Inrush Green Neon
Switch (I/O)
Fuseholder, Blanking Plate and Double
Pole Switch Marked (I/O):
A0 = 1 x FX0359 + 1 x Blanking Plate
(Right) + D.P. Switch (I/O)
B2 = 1 x VS0002 + 1 x Blanking Plate
B3 = 1 x FX0359 + 1 x Blanking Plate
+ D.P. High Inrush Switch (I/O)
B5 = 1 x VS0001 + 1 x Blanking Plate + D.P
Switch (I/O)
How to order -
BZV XX XXXXX XX
Combination of Other Components
IEC Connectors 327
IEC Connectors
C14 and C16 IEC Inlet - Vertical
Vertical Module Arrangement
BZV04/Z0000/04
Inlet with 2.8mm or 6.3mm
tags
Fuseholder/Voltage
Selector/Indicator
options/Blanking plate
Type of Inlet / Outlet
C14 Power Inlet (cold condition), 6.3 or
2.8mm tabs:
03 = PX0575/63
04 = PX0575/28
C16 Power Inlet (hot condition), 6.3 or 2.8mm
tabs:
05 = PX0595/63
06 = PX0595/28
Please note type 05 and 06 are not available in
ltered version
Filtered or Non Filtered Inlet
Z0000 = Non Filtered
Axxxx = Standard
For Filtered inlet use 6th to 9th characters from
lter ordering code see page 178
E.g. BZV03/A0120/04
Combination of Other Components
Twin Fuseholder:
04 = 2 x FX0359
Voltage Selector and Fuseholder:
14 = 1 x VS0001 + 1 x FX0359
Voltage selector and Neon:
37 = 1 x VS0001 + DX0928/110V/Red
38 = 1 x VS0001 + DX0928/110V/Green
39 = 1 x VS0001 + DX0928/250V/Red
40 = 1 x VS0001 + DX0928/250V/Green
Fuseholder and Neon:
41 = 1 x FX0359 + DX0928/110V/Red
42 = 1 x FX0359 + DX0928/110V/Green
43 = 1 x FX0359 + DX0928/250V/Red
44 = 1 x FX0359 + DX0928/250V/Green
Fuseholder and Blanking Plate:
45 = 1 x FX0359 + Blanking Plate
Voltage Selector and Blanking Plate:
B2 = 1 x VS0001 + Blanking Plate
How to order -
BZV XX XXXXX XX
328 IEC Connectors
IEC Connectors
C20 IEC Inlet - Vertical
Vertical Module Arrangement
BZV49/Z0000/69
Inlet with 4.8mm or 6.3mm
tags
Single Pole Switch marked
I/O
Illuminated, red or green,
switches
High inrush non-illuminated
switch
Type of Inlet / Outlet
C20 Power Inlet (cold condition), 4.8 or
6.3mm tabs:
49 = PX0598/63
50 = PX0598/48
Filtered or Non Filtered Inlet
Z0000 = Non Filtered
Combination of Other Components
Single Pole Switch:
01 = S.P. Switch
Single Pole Switch Marked (I/O):
69 = S.P. Switch (I/O)
Single Pole Illuminated Switch:
02 = S.P. Illuminated Red
08 = S.P. Illuminated Green
Single Pole Non-illuminated High Inrush
Switch Marked I/O:
98 = S.P. High Inrush Switch (I/O)
Single Pole Illuminated (Red or Green 250v
Neon) Switch Marked I/O:
71 = S.P. Switch Illuminated Red (I/O)
74 = S.P. Switch Illuminated Green (I/O)
How to order -
BZV XX XXXXX XX
IEC Connectors 329
IEC Connectors
C14 IEC Inlet/Sheet F IEC Outlet - Vertical
Vertical Module Arrangement
BZV09/Z0000/04
Inlet/Outlet Combination
2.8mm or 6.3mm tags
Filtered Inlet and Blanking
Plate options
Shuttered or Non-shuttered
Outlet
Fused
Type of Inlet / Outlet
C14 Power Inlet (cold condition) and Sheet F
Non-shuttered Power Outlet, 2.8 or 6.3mm tabs:
09 = PX0575/63 + PX0695/63
10 = PX0575/28 + PX0695/28
C14 Power Inlet (cold condition) and Sheet F
Shuttered Power Outlet, 2.8 or 6.3mm tabs:
17 = PX0575/63 + PX0783/63
18 = PX0575/28 + PX0783/28
Filtered or Non Filtered Inlet
Z0000 = Non Filtered
Axxxx = Standard
For Filtered inlet use 6th to 9th characters from
lter ordering code see page 178
E.g. BZV09/A0120/04
Combination of Other Components
Twin Fuseholder:
04 = 2 x FX0359
Voltage Selector and Fuseholder:
14 = 1 x VS0001 + 1 x FX0359
Voltage selector and Neon:
37 = 1 x VS0001 + DX0928/110V/Red
38 = 1 x VS0001 + DX0928/110V/Green
39 = 1 x VS0001 + DX0928/250V/Red
40 = 1 x VS0001 + DX0928/250V/Green
Fuseholder and Neon:
41 = 1 x FX0359 + DX0928/110V/Red
42 = 1 x FX0359 + DX0928/110V/Green
43 = 1 x FX0359 + DX0928/250V/Red
44 = 1 x FX0359 + DX0928/250V/Green
Fuseholder and Blanking Plate:
45 = 1 x FX0359 + Blanking Plate
Voltage Selector and Blanking Plate:
B2 = 1 x VS0001 + Blanking Plate
How to order -
BZV XX XXXXX XX
330 IEC Connectors
IEC Connectors
Sheet F IEC Outlet - Vertical
Vertical Module Arrangement
BZV45/Z0000/02
Outlet with 2.8mm or 6.3mm
tags
Shuttered or Non-Shuttered
Single Pole Switch or Neon
Indicator
I/O Marking Options
Type of Inlet / Outlet
Sheet F Power Outlet (non shuttered), 6.3 or
2.8mm tabs:
45 = PX0695/63
46 = PX0695/28
Sheet F Power Outlet (shuttered), 6.3 or
2.8mm tabs:
47 = PX0783/63
48 = PX0783/28
Filtered or Non Filtered Inlet
Z0000 = Non Filtered
Combination of Other Components
Single Pole Switch:
01 = S.P. Switch
Single Pole Neon Switch:
02 = S.P. Red Neon Switch
08 = S.P. Green Neon Switch
Neon Indicator:
03 = Red Neon Indicator
Single Pole High Inrush Switch:
46 = S.P. High Inrush Switch
Single Pole Switch Marked I/O:
69 = S.P. Switch (I/O)
Single Pole Neon Switch Marked (I/O):
71 = S.P. Red Neon Switch (I/O)
74 = S.P. Green Neon Switch (I/O)
Single Pole High Inrush Switch Marked (I/O):
98 = S.P. High Inrush Switch (I/O)
How to order -
BZV XX XXXXX XX
IEC Connectors 331
IEC Connectors
C14 IEC Fused Inlet - Horizontal
Horizontal Module Arrangement
BZH01/Z0000/01
Fused Inlet with 2.8mm or
6.3mm tags
Single Pole Switch Variations
Filtered Inlet Option
Options of I/O marked
switches
Type of Inlet / Outlet
Single Fused C14 Power Inlet (cold condition),
2.8 or 6.3mm tabs:
01 = PF0011/63
02 = PF0011/28
Twin Fused C14 Power Inlet (cold condition),
2.8 or 6.3mm tabs:
15 = PF0033/63
16 = PF0033/28
Filtered or Non Filtered Inlet
Z0000 = Non Filtered
Axxxx = Standard
For Filtered inlet use 6th to 9th characters from
lter ordering code see pages 179-180
E.g. BZH01/A0620/01
Combination of Other Components
Single Pole Switch:
01 = S.P. Switch
Single Pole Neon Switch:
02 = S.P. Red Neon Switch
08 = S.P. Green Neon Switch
Neon Indicator:
03 = Red Neon Indicator
Single Pole High Inrush Switch:
46 = S.P. High Inrush Switch
Single Pole Switch Marked I/O:
69 = S.P. Switch (I/O)
Single Pole Neon Switch Marked (I/O):
71 = S.P. Red Neon Switch (I/O)
74 = S.P. Green Neon Switch (I/O)
Single Pole High Inrush Switch Marked (I/O):
98 = S.P. High Inrush Switch (I/O)
How to order -
BZH XX XXXXX XX
332 IEC Connectors
IEC Connectors
C14 IEC Fused Inlet - Horizontal
Horizontal Module Arrangement
BZH01/Z0000/10
Fused Inlet with 2.8mm or
6.3mm tags
Double Pole Switch Variations
Filtered Inlet Option
Options of I/O marked
switches
Type of Inlet / Outlet
Single Fused C14 Power Inlet (cold condition),
2.8 or 6.3mm tabs:
01 = PF0011/63
02 = PF0011/28
Twin Fused C14 Power Inlet (cold condition),
2.8 or 6.3mm tabs:
15 = PF0033/63
16 = PF0033/28
Filtered or Non Filtered Inlet
Z0000 = Non Filtered
Axxxx = Standard
For Filtered inlet use 6th to 9th characters from
lter ordering code see pages 179-180
E.g. BZH01/A0620/10
Combination of Other Components
Neon Indicator:
03 = Red Neon Indicator
Double Pole Switch:
10 = D.P. Switch
Double Pole Neon Switch:
11 = D.P. Red Neon Switch
12 = D.P. Green Neon Switch
Double Pole High Inrush Switch:
13 = D.P. High Inrush Switch
Double Pole Switch marked I/O:
70 = D.P. Switch (I/O)
Double Pole Neon Switch Marked (I/O):
76 = D.P. Red Neon Switch (I/O)
77 = D.P. Green Neon Switch (I/O)
Double Pole High Inrush Switch Marked
(I/O):
78 = D.P. High Inrush Switch (I/O)
B1 = D.P. High Inrush Green Neon Switch
(I/O)
How to order -
BZH XX XXXXX XX
IEC Connectors 333
IEC Connectors
C14 IEC Fused Inlet - Horizontal
Horizontal Module Arrangement
BZH09/Z0000/01
Inlet/Outlet Combination
with 2.8mm or 6.3mm tags
Shuttered or Non-Shuttered
Outlet
Single Pole Switch Variations
Filtered Inlet Option
Options of I/O marked
switches
Type of Inlet / Outlet
C14 Power Inlet (cold condition) and Sheet F
Non-shuttered Power Outlet, 2.8 or 6.3mm tabs:
09 = PX0575/63 + PX0695/63
10 = PX0575/28 + PX0695/28
C14 Power Inlet (cold condition) and Sheet F
Shuttered Power Outlet , 2.8 or 6.3mm tabs:
17 = PX0575/63 + PX0783/63
18 = PX0575/28 + PX0783/28
Filtered or Non Filtered Inlet
Z0000 = Non Filtered
Axxxx = Standard
For Filtered inlet use 6th to 9th characters from
lter ordering code see page 178
E.g. BZH09/A0120/01
Combination of Other Components
Single Pole Switch:
01 = S.P. Switch
Single Pole Neon Switch:
02 = S.P. Red Neon Switch
08 = S.P. Green Neon Switch
Neon Indicator:
03 = Red Neon Indicator
Single Pole High Inrush Switch:
46 = S.P. High Inrush Switch
Single Pole Switch Marked I/O:
69 = S.P. Switch (I/O)
Single Pole Neon Switch Marked (I/O):
71 = S.P. Red Neon Switch (I/O)
74 = S.P. Green Neon Switch (I/O)
Single Pole High Inrush Switch Marked (I/O):
98 = S.P. High Inrush Switch (I/O)
How to order -
BZH XX XXXXX XX
334 IEC Connectors
IEC Connectors
C14 IEC Inlet/Sheet F IEC Outlet - Horizontal
Horizontal Module Arrangement
BZH11/Z0000/10
Inlet/Outlet Combination
with 2.8mm or 6.3mm tags
Single or Twin Fused Inlet
Shuttered or Non-Shuttered
Outlet
Double Pole Switch Variations
Filtered Inlet Option
Options of I/O marked
switches
Type of Inlet / Outlet
Single Fused C14 Power Inlet (cold condition) and
Sheet F Power Outlet, 2.8 or 6.3mm tabs:
11 = PF0011/63 + PX0695/63
12 = PF0011/28 + PX0695/28
Twin Fused C14 Power Inlet (cold condition)
and Sheet F Power Outlet , 2.8 or 6.3mm tabs:
13 = PF0033/63 + PX0695/63
14 = PF0033/28 + PX0695/28
Single Fused C14 Power Inlet (cold condition) and
Sheet F Shuttered Power Outlet, 2.8 or 6.3mm tabs:
19 = PF0011/63 + PX0783/63
20 = PF0011/28 + PX0783/28
Twin Fused C14 Power Inlet (cold condition) and
Sheet F Shuttered Power Outlet , 2.8 or 6.3mm tabs:
21 = PF0033/63 + PX0783/63
22 = PF0033/28 + PX0783/28
Filtered or Non Filtered Inlet
Z0000 = Non Filtered
Axxxx = Standard
For Filtered inlet use 6th to 9th characters from
lter ordering code see pages 179-180
E.g. BZH11/A0620/10
Combination of Other Components
Neon Indicator:
D3 = Red Neon Indicator
Double Pole Switch:
10 = D.P. Switch
Double Pole Neon Switch:
11 = D.P. Red Neon Switch
12 = D.P. Green Neon Switch
Double Pole High Inrush Switch:
13 = D.P. High Inrush Switch
Double Pole Switch Marked I/O:
70 = D.P. Switch (I/O)
Double Pole Neon Switch Marked (I/O):
76 = D.P. Red Neon Switch (I/O)
77 = D.P. Green Neon Switch (I/O)
Double Pole High Inrush Switch Marked
(I/O):
78 = D.P. High Inrush Switch (I/O)
B1 = D.P. High Inrush Green Neon Switch (I/O)
How to order -
BZH XX XXXXX XX
IEC Connectors 335
IEC Connectors
C14 IEC Inlet/Sheet F IEC Outlet - Horizontal
Horizontal Module Arrangement
BZH11/Z0000/00
Fused Inlet/Outlet
Combination with 2.8mm or
6.3mm tags
Filtered Inlet Option
Single or Twin Fused
Type of Inlet / Outlet
Single Fused C14 Power Inlet (cold condition) and
Sheet F Non-shuttered Power Outlet, 2.8 or 6.3mm
tabs:
11 = PF0011/63 + PX0695/63
12 = PF0011/28 + PX0695/28
Twin Fused C14 Power Inlet (cold condition) and
Sheet F Non-shuttered Power Outlet , 2.8 or 6.3mm
tabs:
13 = PF0033/63 + PX0695/63
14 = PF0033/28 + PX0695/28
Single Fused C14 Power Inlet (cold condition) and
Sheet F Shuttered Power Outlet, 2.8 or 6.3mm tabs:
19 = PF0011/63 + PX0783/63
20 = PF0011/28 + PX0783/28
Twin Fused C14 Power Inlet (cold condition) and
Sheet F Shuttered Power Outlet , 2.8 or 6.3mm tabs:
21 = PF0033/63 + PX0783/63
22 = PF0033/28 + PX0783/28
Filtered or Non Filtered Inlet
Z0000 = Non Filtered
Axxxx = Standard
For Filtered inlet use 6th to 9th characters from
lter ordering code see pages 179-180
E.g. BZH11/A0620/00
Combination of Other Components
None
00 = None
How to order -
BZH XX XXXXX XX
336 IEC Connectors
IEC Connectors
C14 IEC Inlet - Mini Bezel
Minimum Combined Bezel Size
BZM27/Z0000/57B
Inlet with 2.8, 4.8 or 6.3mm
tags
Horizontal Module
Arrangement
Single and Double Pole
Switch Variations
Filtered Inlet Option
Type of Inlet / Outlet
C14 Power Inlet (cold
condition), 6.3, 4.8 &
2.8mm tabs:
27 = PX0575/63
42 = PX0575/48
28 = PX0575/28
Filtered or Non Filtered Inlet
Z0000 = Non Filtered
Axxxx = Standard
For Filtered inlet use 6th to 9th
characters from lter ordering
code see page 178
E.g. BZM27/A0120/57B
Switch Variation
Single Pole Switch, 4.8mm or solder tab, marked I/O:
53 = S.P. Switch, 4.8mm tab (I/O)
54 = S.P. Switch, solder tab (I/O)
Single Pole Illuminated Switch, 4.8mm or solder tab:
55 = S.P. Switch Illum. Red, 4.8mm tab
61 = S.P. Switch Illum. Green, 4.8mm tab
56 = S.P. Switch Illum. Red, solder tab
62 = S.P. Switch Illum. Green, solder tab
Double Pole Switch, 4.8mm or solder tab, marked I/O:
57 = D.P. Switch, 4.8mm tab (I/O)
58 = D.P. Switch, solder tab (I/O)
Double Pole Illuminated Switch, 4.8mm or solder tab:
59 = D.P. Switch Illum. Red, 4.8mm tab
63 = D.P. Switch Illum. Green, 4.8mm tab
60 = D.P. Switch Illum. Red, solder tab
64 = D.P. Switch Illum. Green, solder tab
Double Pole High Inrush, 4.8mm tabs:
65 = D.P. High Inrush Switch, 4.8mm tabs (S.P. format)
Double Pole High Inrush, 4.8mm tabs, marked I/O:
68 = D.P. High Inrush Switch, 4.8mm tabs, I/O (S.P.
format)
Single Pole Illuminated Switch, 4.8mm or solder tab,
Marked I/O:
A1 = S.P. Switch Illum. Red, 4.8mm tab (I/O)
A5 = S.P. Switch Illum. Green, 4.8mm tab (I/O)
A2 = S.P. Switch Illum. Red, solder tab (I/O)
A6 = S.P. Switch Illum. Green, solder tab (I/O)
Double Pole Illuminated Switch, 4.8mm or solder tab,
Marked I/O:
A3 = D.P. Switch Illum. Red, 4.8mm tab
A7 = D.P. Switch Illum. Green, 4.8mm tab
A4 = D.P. Switch Illum. Red, solder tab
A8 = D.P. Switch Illum. Green, solder tab
Panel Thickness
1.0mm = A
1.5mm = B
2.0mm = C
3.0mm = D
How to order -
BZM XX XXXXX XX X
IEC Connectors 337
IEC Connectors
C14 IEC Fused Inlet - Polyange
Vertical Module Arrangement
Vertical Module Arrangement
BVA01/Z0000/02
BVB01/Z0000/01
Fused Inlet with 2.8mm or
6.3mm tags
Screw Fixing to Panel
Single Pole Switch Variations
Filtered Inlet Option
Options of I/O marked
switches
Fused Inlet with 2.8mm or
6.3mm tags
Screw Fixing to Panel
Single Pole Switch Variations
Filtered Inlet Option
Options of I/O marked
switches
Flange Type
A = Top xing
B = Side xing
Type of Inlet / Outlet
Single Fused C14 Power Inlet
(cold condition), 6.3 or 2.8mm
tabs:
01 = PF0011/63
02 = PF0011/28
Twin Fused C14 Power Inlet
(cold condition), 6.3 or 2.8mm
tabs:
15 = PF0033/63
16 = PF0033/28
Z0000 = Non Filtered
Axxxx = Standard
For Filtered inlet use 6th to 9th
characters from lter ordering code see
pages 179-180
E.g. BVA01/A0620/01
Single Pole Switch:
01 = S.P. Switch
Single Pole Neon Switch:
02 = S.P. Red Neon Switch
08 = S.P. Green Neon Switch
Neon Indicator:
03 = Red Neon Indicator
Single Pole High Inrush Switch:
46 = S.P. High Inrush Switch
Single Pole Switch Marked I/O:
69 = S.P. Switch (I/O)
Single Pole Neon Switch Marked (I/O):
71 = S.P. Red Neon Switch (I/O)
74 = S.P. Green Neon Switch (I/O)
Single Pole High Inrush Switch Marked (I/O):
98 = S.P. High Inrush Switch (I/O)
How to order -
BV X XXXXX
XX XX
Filtered or Non Filtered Inlet Combination of Other Components
338 IEC Connectors
IEC Connectors
C14 IEC Fused Inlet - Polyange
Vertical Module Arrangement
Vertical Module Arrangement
BVA01/Z0000/10
BVB01/Z0000/11
Fused Inlet with 2.8mm or
6.3mm tags
Screw Fixing to Panel
Double Pole Switch Variations
Filtered Inlet Option
Options of I/O marked
switches
Fused Inlet with 2.8mm or
6.3mm tags
Screw Fixing to Panel
Double Pole Switch Variations
Filtered Inlet Option
Options of I/O marked
switches
Flange Type
A = Top xing
B = Side xing
Type of Inlet / Outlet
Fused C14 Power Inlet (cold
condition), 6.3 or 2.8mm tabs:
01 = PF0011/63
02 = PF0011/28
Twin Fused C14 Power Inlet
(cold condition), 6.3 or 2.8mm
tabs:
15 = PF0033/63
16 = PF0033/28
Z0000 = Non Filtered
Axxxx = Standard
For Filtered inlet use 6th to 9th
characters from lter ordering code see
pages 179-180
E.g. BVA01/A0620/10
Neon Indicator:
D3 = Red Neon Indicator
Double Pole Switch:
10 = D.P. Switch
Double Pole Neon Switch:
11 = D.P. Red Neon Switch
12 = D.P. Green Neon Switch
Double Pole High Inrush Switch:
13 = D.P. High Inrush Switch
Double Pole Switch Marked I/O:
70 = D.P. Switch (I/O)
Double Pole Neon Switch Marked (I/O):
76 = D.P. Red Neon Switch (I/O)
77 = D.P. Green Neon Switch (I/O)
Double Pole High Inrush Switch Marked
(I/O):
78 = D.P. High Inrush Switch (I/O)
B1 = D.P. High Inrush Green Neon Switch
(I/O)
How to order -
BV X XX XXXXX XX
Filtered or Non Filtered Inlet Combination of Other Components
IEC Connectors 339
IEC Connectors
C14 IEC Fused Inlet
EMI Filter Options
BVA01/Z0000/10
For Polysnap modules BZV03,
BZV04, BZV09, BZV10,
BZV17, BZV18, BZH09,
BZH10, BZH17, BZH18,
BZM27, BZM28
PX0575 style IEC inlet
Using PS01/A style lter
Standard Attenuation Filter
Polysnap Part No.
From Polysnap
Selection
Rating
1 AMP
“
“
3 AMP
“
“
6 AMP
“
“
10 AMP
“
“
Filter Type
A = Standard
Version
1
2
3
1
2
3
1
2
3
1
2
3
01 = 1A
03 = 3A
06 = 6A
10 = 10A
L1
2 x 2.8mH
2 x 10mH
2 x 10mH
2 x 0.75mH
2 x 1.8mH
2 x 1.8mH
2 x 0.3mH
2 x 0.7mH
2 x 0.7mH
2 x 0.17mH
2 x 0.35mH
2 x 0.17mH
1 = Version 1
2 = Version 2
3 = Version 3
Cx
1 x 15nF
1 x 15nF
1 x 47nF
1 x 15nF
1 x 15nF
1 x 47nF
1 x 15nF
1 x 15nF
1 x 47nF
1 x 15nF
1 x 15nF
1 x 47nF
0 = None
Cy
2 x 2.2nF
2 x 2.2nF
2 x 2.2nF
2 x 2.2nF
2 x 2.2nF
2 x 2.2nF
2 x 2.2nF
2 x 2.2nF
2 x 2.2nF
2 x 2.2nF
2 x 2.2nF
2 x 2.2nF
From Polysnap
Selection
How to order -
B XXXX A XX X X XX
Rating L/C Circuit
Additional
Components Polysnap Part No.
Part No. Example
BZV03/A0120/02
BZV style Polysnap module with PX0575 IEC
power inlet, lter rated at 1 amp, L/C circuit
version 2 (L1 = 2 x 10mH, Cx = 1 x 15nF,
Cy = 2 x 2.2nF) 6.3mm tabs and single
pole red neon switch.
Filter Specication
Max. Working Voltage:
Earth Leakage Current:
Temperature Range:
Max. Ambient Temp.:
(@ Full Load)
Test Voltage:
Approvals:
Attenuation Curves:
250V a.c. 50-400Hz
<0.35mA (250V. 50Hz)
–25ºC to +85ºC
40ºC (derate linearly to 0A @ 85ºC)
2700V d.c. 2 secs. Lines to Earth
1100V d.c. 2 secs. Live to Neutral
See PS01/A lter, page 183
340 IEC Connectors
IEC Connectors
C14 Inlet Single Fuse - Standard Filter
EMI Filter Options For Polysnap modules BZV01,
BZV02, BZH01, BZH02,
BZH11, BZH12, BZH19,
BZH20, BVA01, BVA02,
BVB01, BVB02
PF0011 style single fuse IEC inlet
Using PS21/A style lter
Standard Attenuation Filter
Polysnap Part No.
From Polysnap
Selection
Rating
1 AMP
“
“
3 AMP
“
“
6 AMP
“
“
10 AMP
“
“
Filter Type
A = Standard
Version
1
2
3
1
2
3
1
2
3
1
2
3
01 = 1A
03 = 3A
06 = 6A
L1
2 x 12mH
2 x 1.8mH
2 x 6.5mH
2 x 0.7mH
2 x 2mH
2 = Version 2
3 = Version 3
Cx
1 x 47nF
1 x 15nF
1 x 47nF
1 x 15nF
1 x 47nF
0 = None
Cy
2 x 2.2nF
2 x 2.2nF
2 x 2.2nF
2 x 2.2nF
2 x 2.2nF
From Polysnap
Selection
How to order -
B XXXX A XX X X XX
Rating L/C Circuit
Additional
Components Polysnap Part No.
Part No. Example
BZV01/A0630/01
BZV style Polysnap module with PF0011 single
fused (5 x 20mm) IEC power inlet, lter rated at
6 amp, L/C circuit version 3 (L1 = 2 x 2.0mH, Cx
= 1 x 47nF, Cy = 2 x 2.2nF), 6.3mm tabs and
single pole switch.
Filter Specication
Max. Working Voltage:
Earth Leakage Current:
Temperature Range:
Max. Ambient Temp.:
(@ Full Load)
Test Voltage:
Approvals:
Attenuation Curves:
250V a.c. 50-400Hz
<0.35mA (250V. 50Hz)
–25ºC to +85ºC
40ºC (derate linearly to 0A @ 85ºC)
2700V d.c. 2 secs. Lines to Earth
1100V d.c. 2 secs. Live to Neutral
See PS21/A lter, page 187
IEC Connectors 341
From Polysnap
Selection
IEC Connectors
C14 Inlet Twin Fuse - Standard Filter
EMI Filter Option For Polysnap modules BZV15,
BZV16, BZH13, BZH14,
BZH15, BZH16, BZH21,
BZH22, BVA15, BVA16,
BVB15, BVB16
PF0033 style twin fuse IEC inlet
Using PS26/A lter
Standard Attenuation Filter
Polysnap Part No.
Rating
1 AMP
“
“
4 AMP
“
“
Filter Type
A = Standard
Version
1
2
3
1
2
3
02 = 2A
04 = 4A
L1
2 x 1.8mH
2 x 0.7mH
2 = Version 2
Cx
1 x 15nF
1 x 15nF
0 = None
Cy
2 x 2.2nF
2 x 2.2nF
From Polysnap
Selection
How to order -
B XXXX A XX X X XX
Rating L/C Circuit
Additional
Components Polysnap Part No.
Part No. Example
BZH13/A0420/00
BZH style Polysnap module with PF0033 twin
fused (5 x 20mm) IEC power inlet, lter rated at
4 amps, L/C circuit version 2 (L1 = 2 x 0.7mH,
Cx = 1 x 15nF, Cy = 2 x 2.2nF) 6.3mm tabs and no
additional components.
Filter Specication
Max. Working Voltage:
Earth Leakage Current:
Temperature Range:
Max. Ambient Temp.:
(@ Full Load)
Test Voltage:
Approvals:
Attenuation Curves:
250V a.c. 50-400Hz
<0.35mA (250V. 50Hz)
–25ºC to +85ºC
40ºC (derate linearly to 0A @ 85ºC)
2700V d.c. 2 secs. Lines to Earth
1100V d.c. 2 secs. Live to Neutral
See PS26/A lter, page 189