1
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
MEMORY CARD CONNECTORS
(PCMCIA CONFORMABLE)
560H SERIES
■FEATURES
• The connectors conform to the Japan Electronic Industry
Development Association (JEIDA) and Personal
Computer Memory Card International Association
(PCMCIA) standards Ver. 4.
• Contact pitch of 1.27 mm (0.050 in.) x 1.27 mm (0.050 in.).
Incorrect insertion is prevented. Hot system plugging is
possible (contact detection).
• Plugs have an easy-to-use ejection mechanism.
• Raised mounting type connectors (under which
components can be mounted) and low-profile connectors
are available.
• In addition to connectors for type I and type II cards, a
connector for type III cards has been provided.
• The sockets are of the SMT type. A straddle-type socket for double-sided mounting and a socket for single-sided
mounting are available.
■ PIN CONNECTOR (PLUG) CONTACT LENGTH
■ SPECIFICATIONS
Item
Operating temperature range
Current rating
Voltage rating
Contact resistance
Insulation resistance
Dielectric withstanding voltage
Insertion/withdrawal life
Specification
– 55°C to + 85°C
DC 0.5 A
AC 250 V
40 mΩ max (6 VDC, 0.1 A)
1000 MΩ min. (500 VDC)
500 VAC for 1 minute
Industrial environment: 5,000 times
Office environment: 10,000 times
Contact type
Power, ground pins
Card detection pins
Other signal pins
Pin No.
1, 17, 34, 35, 51, 68
36, 67
Others
Contact length
5.0 mm (0.196 in.)
3.5 mm (0.137 in.)
4.25 mm (0.167 in.)
■MATERIALS
Plug body: PPS resin UL94V-0
: 6T nylon (for type III card connector) UL94V-0
Ejector: Polyester
:
PPS resin
(for SMT and type III card connectors)
Copper alloy
Contact: Gold over palladium over nickel
(PAGOS)
Terminal: Palladium
Specification
Item
Insulating material
Conductor
Plating
560H Series Connector Conforming to Ver. 4
2
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
0.51 (0.059)
3 (0.118)
1.905 (0.075)
3.810 (0.15)
5.715 (0.225)
6 (0.236)
8 (0.315)
7 (0.276)
4.5 (0.177)
2.42 (0.095)
35.2 (1.385)
11.2 (0.441)
59.7 (2.35)
50.8 (2)
2- ø 2.2 (0.0866)
1.27 (0.05) × (34 – 1) = 41.91 (1.65)
1.27 (0.05)
No.1 No.17
No.35 No.51
No.34
No.68
1.27 (0.05)
53.7 (2.114)
8.5
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, TO BE MOUNTED ON
THE BACK OF THE PC BOARD) SUPPORTS TYPE I, II CARDS
■DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, RAISED MOUNTING
TYPE)
SUPPORTS TYPE I, II CARDS
■DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
Unit: mm (in.)
Part number: FCN-565P068-G/F-V4
Part number: FCN-565P068-G/J-V4 (SUPPORTS TYPE I, II CARD)
Part number: FCN-565P068-G/J-4V (SUPPORTS TYPE I, II, III CARD)
7 (0.276)2.5
(0.098)
1 (0.039)
5.715 (0.225)
3.810 (0.15)
1.905 (0.075)
0.51 (0.059)
2.42 (0.095)
35.2 (1.385)
11.2 (0.441)
59.7 (2.35)
50.8 (2)
1.27 (0.05)
1.27 (0.05) × (34 – 1) = 41.91 (1.65)
(2) M2.5 (0.098 in.)
thread nut
1.27 (0.05) × (34 – 1) = 41.91 (1.65)
1.27 (0.05)
1.27 (0.05)
No.68 No.51 No.35
No.1No.17No.34
4(0.157)
Unit: mm (in.)
• A model with no nuts buried is available. Part number: FCN-565P068-G/H-V4
• Applicable screw: Self-tapping screw M2.5 (0.098 in.) x 5 mm (0.197 in.) (for 1.6 mm (0.063 in.) thick PC board)
• A model mounted on bottom of a PC board is also available. Part number: FCN-565P068-G16-V4 (supports type I, II)
50.8 (2)
±0.05 (0.0039)
1.27 (0.05) × (68/2-1) =
41.91 (1.65)
±0.1 (0.0039)
1.27 (0.05)
±0.05 (0.0020)
No.34
No.68
5.715 (0.225)
±0.05 (0.0020)
3.810 (0.15)
±0.05 (0.0020)
1.905 (0.075)
±0.05 (0.0020)
No.35
68- ø 1 (0.039)
±0.05 (0.0020)
(Card insertion side)
2- ø 2.8 (0.110)
±0.1 (0.0039)
<To be mounted on back of PC board>
No.1
50.8 (2)
±0.1 (0.0039)
41.91 (1.65)
±0.1 (0.0039)
1.27 (0.05)
±0.05 (0.0020)
No.3
No.1
No.2
5.715 (0.225)
±0.05 (0.0020)
3.810 (0.15)
±0.05 (0.0020)
1.905 (0.075)
±0.05 (0.0020)
No.68
2- ø 2.8 (0.110)
±0.1 (0.0039)
68- ø 1 (0.039)
±0.05 (0.0020)
(Card insertion side)
560H Series Connector Conforming to Ver. 4
3
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
© 2001 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks
of their respective owners. Rev. 09/2001
Japan
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: promothq@ft.ed.fujitsu.com
Web: www.fcl.fujitsu.com
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fax: (1-408) 745-4970
Email: marcom@fcai.fujitsu.com
Web: www.fcai.fujitsu.com
Europe
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: info.marketing@fceu.fujitsu.com
Web: www.fceu.fujitsu.com
Asia Pacific
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#04-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 375-8560
Fax: (65) 273-3021
Email: fcal@fcal.fujitsu.com
www.fcal.fujitsu.com
Fujitsu Components
International
Headquarter
Offices
