SBT80-06J Ordering number : ENN8225 SBT80-06J Schottky Barrier Diode (Twin Type * Cathode Common) 60V, 8A Rectifier Applications * High frequency rectification (switching regulators, converters, choppers). Features * * * * * * Guaranteed up to Tj=150C. Low forward voltage (VF max=0.58V). Short reverse recovery time. Low switching noise. High reliability due to highly reliable planar structure. Attachment workability is good by Mica-less package. Specifications Absolute Maximum Ratings at Ta=25C Parameter Symbol Repetitive Peak Reverse Voltage Nonrepetitive Peak Reverse Surge Voltage Average Output Current Surge Forward Current Conditions Ratings VRRM VRSM IO IFSM Unit 60 V 66 V 50Hz resistive load, Sine wave, Tc=109C 50Hz sine wave, 1 cycle 8 A 80 A Junction Temperature Tj --55 to +150 C Storage Temperature Tstg --55 to +150 C Electrical Characteristics at Ta=25C Parameter Symbol Reverse Voltage VR Forward Voltage VF Reverse Current IR Interterminal Capacitance C Thermal Resistance Rth(j-c) Conditions IR=1mA, Tj=25C* IF=3.0A, Tj=25C* Ratings min typ max 60 VR=30V, Tj=25C* VR=10V, Tj=25C* Junction-Case : Smoothed DC Unit V 0.58 V 0.1 mA 5.0 C / W 130 pF Note) * : Value per element Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 31505SD TS IM TB-00001167 No.8225-1/3 SBT80-06J Package Dimensions unit : mm 1178A Electrical Connection 1 3 4.5 2.8 16.0 7.2 3.5 7.2 10.0 3.2 1 : Anode 2 : Cathode 3 : Anode 5.6 18.1 2 2.4 14.0 1.6 1.2 0.7 0.75 1 2 1 : Anode 2 : Cathode 3 : Anode 3 2.55 2.4 2.55 2.55 SANYO : TO-220ML 2.55 IF -- VF Represented by max 150 Tj= 10 Forward Current, IF -- A C 7 5 25 C 7 5 3 2 1.0 7 5 3 2 0C 3 15 Tj= 2 max C 150 10 typ yp t C 125 7 5 C 100 3 typ 2 1.0 7 5 0 0.1 0.5 1.0 1.5 Forward Voltage, VF -- V PF(AV) -- IO 10 (1)Rectangular wave =60 (2)Rectangular wave =120 (3)Rectangular wave =180 (4)Sine wave =180 8 6 (4) (3) (2) (1) Rectangular wave 4 360 Sine wave 2 180 360 0 0 1 2 3 4 5 6 7 10 20 8 Average Forward Current, IO -- A 9 10 IT08387 30 40 50 60 Reverse Voltage, VR -- V IT08385 Average Reverse Power Dissipation, PR(AV) -- W 0 Average Forward Power Dissipation, PF(AV) -- W IR -- VR 100 Reverse Current, IR -- mA 2 70 IT08386 PR(AV) -- VRM 4.5 3.5 (1)Rectangular wave =300 (2)Rectangular wave =240 (3)Rectangular wave =180 (4)Sine wave =180 3.0 Rectangular wave 4.0 (1) (2) VR 2.5 (3) 360 2.0 1.5 Sine wave (4) VR 1.0 180 360 0.5 PR max at Tj=150C 0 0 10 20 30 40 50 Peak Reverse Voltage, VRM -- V 60 70 IT08388 No.8225-2/3 SBT80-06J Tc -- IO 170 140 130 120 Rectangular wave (4) 110 100 (2) (1) 360 (3) Sine wave 90 80 3 2 100 7 180 360 70 1 0 2 3 4 5 6 7 8 Average Output Current, IO -- A 9 IS 20ms t 80 60 40 20 0 7 0.01 2 3 5 7 0.1 2 Time, t -- s 3 5 7 1.0 2 3 ID01009 2 3 5 7 2 10 3 5 7 100 IT08495 2 3 5 7 10 ID01010 Reverse Voltage, VR -- V IT08389 Current waveform 50Hz sine wave Tj=150C 100 5 1.0 10 IFSM -- t 120 Surge Forward Current, IFSM(Peak) -- A Interterminal Capacitance, C -- pF 150 f=100kHz Transient Thermal Resistance, Rth(j-c) -- C / W Case Temperature, Tc -- C 160 C -- VR 5 (1)Rectangular wave =60 (2)Rectangular wave =120 (3)Rectangular wave =180 (4)Sine wave =180 Rth(j-c) -- t 10 7 5 3 2 1.0 7 5 3 0.001 2 3 5 70.01 2 3 5 7 0.1 2 3 5 7 1.0 Time, t -- s Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of March, 2005. Specifications and information herein are subject to change without notice. PS No.8225-3/3