Specification Tyco Electronics Control Drawing Raychem a) Part as supplied. DIIKL** iN H DIA b) Part after unrestricted <P ya) Dia Potting Port recovery. a 4.5 wo.1a Dia Potting Port-~ {-<l] -) _>| 1) om} 2.0 Hl U (0.08; Dia Hole DIMENSIONS in millimetres A DIA fin inches, for reference} H J P R S T U JO HW JW Xx Y Part No. Min Max Min Max 410% +104 +10% +10% +10K +104 +420% 420K +20% +20% a b a b b b b b b b b b b b 222K121 24 10.4 24 5.6 25 25 19 3.0 1.0 8.5 1.3 0.5 18 16 {0.94} {0.41) {0.94) {0.22} {0.98) {0.98} {0.75} (0.12) (0.04) {0,33} (0. 05) {0.02} {0.71} {0,63} 2223K132 30 14.2 30 5.9 32 27 20 3.0 1.0 8.5 1.5 0.8 18 20 (1.178) (0.56) {1.18) {0.23} (1.26) {1.06} {0.79} {0.12} {0.04} {0.33} {0.06} {0.03) {0.71} {0.79} 222K 142 31 18.0 31 7.1 39 31 21 3.0 1.0 15.0 1.8 1.0 18 20 {1.22} (0.71) {1.22} {0.28} (1.54) {1.22} {0.83} {0.12} {0.04} {0.59} {0.07} {0.04} {0.71} {0.79} 222K 152 36 22.4 36 8.4 46 38 26 3.0 1.0 16.0 1.8 1.0 25 25 (1.42) (0.88) {1.42) (0.33) (1.81) {1.50} {7.02} {0.12} {0.04) {0.63} {0.07} {0.04} {0.98} {0.98} 223K163 43 28.2 43 9.9 55 45 30 3.0 1.7 17.5 2.0 1.0 25 30 (1.69) {7.71} {1.69) {0.39} (2.17) (1.77) (1.18) {0.12} {0.07} {0.69} {0.08} {0.04) {0.98} {1.18} 222K174 60 35.1 60 13.7 80 54 35 3.0 1.7 32.0 3.3 1S 25 45 {2.36} (1.38) {2.36) {0.62} (3.15) {2.13) (1.38) (0.12) {0.07} {1.26} {0.13} {0.06} {0.98} {1.77} 222K185 66 44.5 66 16.8 108 68 42 3.0 2.0 48.0 3.8 2.0 35 70 {2.60} {1.75} {2.60) {0.66} (4.25) {2.68) {1.65} {0.12} {0.08) {1.89} (0.15) {0.08} {1.38} (2.76) Copyright C!) The copyright in this drawing is the property of Tyco Electronics UK Ltd. The drawing is issued on the condition that it is not copied, reproduced or disclosed to a third party, either in whole or in part without the prior written consent of Tyco Electronics UK Ltd. Drawn A.LILLEY. Checked Issue 11 Date April 2008 Conforms to ISO Recommendations 3rd Angle Projection Approval Not to Scale f=} Design MKTG. Tech. Page 1 of 2 222K 1 XXR A Specification Pent Manber aye em Control Drawing 222K1** Issue 11 Iss. Date ECR. Details of Change 2 June 1979 2184 Plating spec removed. 3 August 1982 | 2958 Product description system added. 4 January 1984 | *xx 222K174 H&Ja was 52, eyelet clip note removed. 5 March 1984 4146 Redrawn & viton deleted. 6 August 1986 | 4865 JO dimension changed. 7 May 1966 KKK Redrawn. 8 June 1999 CROS-HM-0013| 222K142 JO dim changed to 15 3 May 2001 CROT-HM-O0008| Redrawn to include inches. 10 April 2004 CRO4-HM-O0001| 7/180 adhesive added to -3 material. 11 April 2008 CRO7-HM-010 SCD was titled 222K121 thru 185 (Ordering Information) 222K 1 XK-KK/ KX Adhesive Slash Number Cif required see compatibility chart) Material Dash Number (see compatibility chart) Base Part Number (COMPATIBILITY CHART) SPEC Number Material Dash Number Material Description Coating Slash Number POLYOLEFIN, SEMI-RIGID POLYOLEFIN, FLEXIBLE ELASTOMER, FLUID RESISTANT RT-301 /42_,/86 RT-1304 /42_,/86 RW-2070 442, /86 x 200 / 7180 7180 1225 NOTES If eyelet clip COO0OW212) is required with part then add C5-1858 to description 222K 132-3-CS5-1858-0) . As suppLied dimensions are for uncoated parts, when coating is added Ci.e. entry diameters will reduce by 1.5mm Max. Potting ports are optional, when specified by suffix :- -00 they will be Located as shown. For -12 SCD see 222K1xx-T2. For -100 SCD see 222K1*xx-100 O Tyco Electronics UK Ltd. Tyco Electronics Corporation Faraday Road, 300, Constitution Drive, Swindon, Wiltshire, SN3 SHH Menlo Park, CA 934025 EngLand USA Telephone: (01793) 328171 Fax: 572516 Telephone (650) 361-3860 Fax: (650) 361-5579 Cage Code KI010 Cage Code 060390 Page 2 of 2