MEDER electronic DIP Series Molded DIP Reed Relays DESCRIPTION The DIP series is a very compact design having a low profile package and a high profile package. This series is compatible with all DIP relays. CHARACTERISTICS FEATURES * High resistance option available * Diode option available * Low profile package * Standard pin configurations * IC-pin compatible * 4.25 kVDC breakdown voltage for pin out 13 * UL approval DIMENSIONS All dimensions in mm [inch] www.meder.com 147 DIP Series MEDER electronic Molded DIP Reed Relays ORDER INFORMATION Series Option () Version with magn. Shield Nominal Voltage Contact Form Switch Model Pin Out XX - XX XX - XX 1A 72, 75 10, 11, 12, 13* 1B 72 13*, 19 2A 72 21 1C 90 51 DIP 05, 12, 15, 24 X 05, 12,15. 24 DIP12 - 1A75 - 13L 12 is the nominal voltage 1A is the contact form 75 is the switch model 13 is the pin out L is the option A, B, C, L(M), D(Q), E(R), F(S) Options Part Number Example *Selects 4-25 (3.0 kVRMS) breakdown voltage contact to coil. PIN OUT View from top of component, 2.54 mm [0.10"] pitch grid 10 12 11 8 14 1 14 8 14 8 1 7 1 7 7 13 19 21 14 14 8 2 6 14 1 8 8 + 1 7 www.meder.com 148 51 14 8 1 7 7 MEDER electronic DIP Series Molded DIP Reed Relays OPTIONS ( ) Versions with magnetic shield, View from top of component, 2.54 mm [0.10"] pitch grid A C B 14 8 14 8 14 8 1 7 1 7 1 7 L (M) D (Q) 14 8 14 1 7 1 E (R) + F (S) 8 14 8 14 7 1 7 1 8 7 + OPTIONS DEPENDENCE ON CASE SIZES Contact Form Package Size Low Profile 1A D E A B C 10 X X X X 11 X 12 X 13 X M Q X X X X X R S X 12 X 13 X 19 X 2A High Profile 21 X High Profile F X X 51 E X High Profile Low Profile D 11 1B 1C B C Options L 10 High Profile L A Pin Out X X X X X X X X X X X X X X X X X X X X X X = No option = Diode between Pin 6 and Pin 9 (Pin 6 is positive) = Internal shield on Pin 2. = Diode between Pin 6 and Pin 9 (Pin 6 is positive and internal shield on Piin 2) = With Diode between pin 2 and 6 (Pin 2 is positive) = Internal shield on pin 9 F M Q R S = With Diode between pin 2 and 6 (Pin 2 is positive) and Internal shield on pin 9 = External magnetic shield = External magnetic shield and diode between pin 2 and 6 (Pin 2 is positive) = External magnetic shield and internal shield on pin 9 = External magnetic shield and with diode between pin 2 and 6 (Pin 2 is positive) and internal shield on pin 9 www.meder.com 149 DIP Series MEDER electronic Molded DIP Reed Relays RELAY DATA Switch Model Contact Form All Data at 20 C Contact Ratings Conditions Switch 72 Form A / B Switch 75 Form A Switch 90 Form C Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit Switching Power Any DC combination of V & A not to exceed their individual max.`s 15 10 10 W Switching Voltage DC or peak AC 200 500 175 V Switching Current DC or peak AC 1.0 0.5 0.5 A Carry Current DC or peak AC 1.25 1.0 1.0 A Static Contact Resistance w/ 0.5 V & 10mA 150 200 150 m Dynamic Contact Resistance Measured w/ 0.5 V & 50mA , 1.5 ms after closure 200 200 250 m Insulation Resistance across Contacts 100 volts applied 1012 1012 1012 1012 109 1012 Breakdown Voltage across Contact Across contacts Contact to coil 250 1500** 1500* 1500** 200 1500 VDC Operate Time incl. Bounce Measured w/ 100 % overdrive 0.5 0.5 0.7 ms Release Time Measured w/ no coil suppression 0.1 0.1 1.5 ms Capacitance at 10 kHz cross contact 0.2 2.0 0.4 2.0 1.0 3.0 pF 1000 500 100 106 Cycles Life Expectancies Switching 5 V - 10 mA DC only & <10 pF stray cap. For other load requirements, see the life test section on P. 120. Environmental Data Shock Resistance 1/2 sinus wave duration 11 ms 50 50 30 g Vibration Resistance From 10 - 2000 Hz 20 20 10 g Ambient Temperature 10C/ minute max. allowable -20 70 -20 70 -20 70 o C Stock Temperature 10C/ minute max. allowable -35 95 -35 95 -35 95 o C Soldering Temperature 5 sec. 260 o C 260 * 600 VDC with 5V coil, 1000 VDC with 12V coil. ** Selects Pin out 13 and 425 kVDC (3.0 kVRMS) breakdown voltage contact to coil. www.meder.com 150 260 MEDER electronic DIP Series Molded DIP Reed Relays COIL DATA Contact Form Switch Model All Data at 20 C 1A 1B ** 2A 1C 72 75 72 72 90 Coil Voltage Coil Resistance Pull-in Voltage Drop-out Volage Nominal Coil Powe VDC VDC VDC mW Nom. Max. Min. Typ. Max. Max. Min. Typ. 5 7.5 450 (180) 500 (200) 550 (220) 3.5 0.75 50 12 16 900 1000 1100 8.4 1.8 145 15 20 1800 2000 2200 10.5 2.2 115 24 30 1800 2000 2200 16.8 3.6 290 5 7.5 450 500 550 3.5 0.75 50 12 16 900 1000 1100 8.4 1.8 145 15 20 1800 2000 2200 10.5 2.2 115 24 30 1800 2000 2200 16.8 3.6 290 5 7.5 180 200 220 3.5 0.75 125 12 16 450 500 550 8.4 1.8 290 15 20 1800 2000 2200 10.5 2.2 115 24 30 1800 2000 2200 16.8 3.6 290 5 7.5 180 200 220 3.5 0.75 125 12 16 450 500 550 8.4 1.8 290 15 20 1800 2000 2200 10.5 2.2 115 24 30 1800 2000 2200 16.8 3.6 290 () For Switch 75. * The pull-in / drop-out voltage and coil resistance will change at rate of 0.4% per C. ** Re-closure of Form B may occur if the max. coil voltage is exceeded. Coil polarity on Form B must be observed. Pin 2 is positive. www.meder.com 151