87106-025 - KEMET ELECTRONICS - Datasheet.Directory

F-3114C 1/08

2© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com

KEMET is now on the QPL list for Switch Mode

Power Supply (SMPS) Military Stacked Capacitors

with MIL-PRF-49470 standard B Level reliability

availability. These devices are intended for high

reliability SMPS and pulse energy applications.

Their low Equivalent Series Resistance (ESR) and

Equivalent Series Inductance (ESL) make them ide-

ally suited for input and output filtering of power sup-

ply applications as well as snubber applications.

The multilayer construction also creates high ther-

mal transfer functions, resulting in very little temper-

ature rise for the generated power giving the capac-

itors excellent high current handling capability.

The performance benefits of ceramic are being

realized in many applications that were heretofore

unavailable to these capacitors. The replacement

of larger capacitance electrolytic capacitors with

smaller value ceramics is a common occurrence

today, but there are still some larger capacitance

values required of the MLCC.

The capacitors are constructed using large chip

sizes, much larger than those available for standard

surface-mount applications. Because they are so

large, mounting these devices directly to the PC

board would more than likely generate cracking

because of straight mechanical strain, or strain

which occurs because of mismatches in CTE (coeffi-

cient of thermal expansion) between the board and

the ceramic.

This strain is proportional to the distance be-

tween the termination pads on the PC board and

results in an increasing propensity for failure

among the larger SMT chips. The leadframe is

attached to the chip stack (from singular to multiple

chips) and creates a mechanical relief between the

ceramic device and the board, so they are not

bound to each other. The contact to the chips is

usually a perforated, vertical, metal plate while the

contact to the board is through a pin structure.

The pin structure located at the bottom of the lead-

frame consists of multiple pins at 100 mil centers.

The formation of these pins can be surface mount-

able styles "L" and "J" (or gull-wing), or as through-

hole insertion pins style "N."

This multi-pin arrangement allows the

extremely low ESR and ESL of the chip package

to be presented to the circuit without any signifi-

cant increases. This arrangement also allows a

very efficient thermal transfer path to exist

between the chip package and the PC board, as

most of the thermal dissipation for this package

will be through the leadframe connection.

These capacitors are available in case codes

3, 4, & 5. They are available in X7R dielectric, in

voltage ranges from 50 VDC to 500 VDC. The

chip stack is horizontal and the leadframe attach-

ment is a high-temperature solder. They are also

available as unpotted bare chips or as a potted

assembly. MIL-PRF-49470 and DSCC drawing

87106 (X7R) are used to establish a baseline part

for high-reliability applications.

Capacitance values at 50 VDC are available

up to 47 μF (X7R). Care must be exercised when

using the bare chips to ensure there can be no

mechanical damage imposed on the mounted

parts, although the potted devices reduce this

potential dramatically.

Larger Case codes 1, 2, & 6 will be available

for order in Q3CY08. The T level high reliability

space level version will be available in calendar

year 2009.

Leadframe

'J' Form

MLC

Chip

KEMET is qualified to supply MIL-PRF-

49470/1 unencapsulated X7R Case Codes 3, 4, &

5 ceramic SMPS capacitors in voltage ratings 50V,

100V, 200V, and 500V. KEMET is also qualified to

supply MIL-PRF-49470/2 encapsulated X7R Case

Codes 3, 4, & 5 ceramic SMPS capacitors in volt-

age ratings 50V, 100V, 200V, and 500V.

The DSCC drawing 87106 has been cancelled

(http://www.dscc.dla.mil/Downloads/

MilSpec/DsccDwg/87106.pdf). However, KEMET

is able to supply to the DSCC 87106 drawing per

customer request. KEMET will supply to the

DSCC 87106 drawing with an exception taken to

performing Group B Inspections on a per lot basis.

Per DSCC drawing section 4.2.2 the acquiring

activity, at its discretion, may accept a certificate of

compliance (CofC) with Group B inspections in

lieu of performing Group B inspections. KEMET

87106 orders will include the CofC stating compli-

ance to the 87106 requirements. KEMET's MIL-

PRF-49470 QPL status confirms KEMET's compli-

ance to the Group B testing requirements.

The MIL-PRF-49470 capacitors are preferred

over the DSCC drawing 87106 capacitors as out-

lined in NASA's Electronic Parts and Packaging

website:http://nepp.nasa.gov/npsl/Capacitors/

87106/87106aps.htm. The M49470 military spec-

ification product provides additional quality assur-

ance provisions that are not required by the DSCC

drawing. These extra provisions helped to create a

more robust replacement for the 87106 capacitors.

MIL-PRF-49470 Requirements:

Electrical Specifications

Rated Voltage: 50V, 100V, 200V, 500V

Voltage-Temperature Coefficient:

Dielectric Voltage Bias = 0V Bias = Vr

BX 50V, 100V ±15% +15%, -25%

BR 200V ±15% +15%, -40%

BQ 500V ±15% +15%, -50%

Capacitance: Measured in accordance with

method 305 of MIL-STD-202 (1kHz ± 100Hz at

1.0Vrms ± 0.2Vrms open circuit voltage).

Dissipation Factor: Dissipation factor measured

at same conditions as capacitance measure-

ment. For X7R capacitors DF maximum is 2.5%.

Insulation Resistance:

• @25°C, rated voltage 100GΩor

1,000MΩ-μF, whichever is less

• @125°C, rated voltage 10GΩor

100MΩ-μF, whichever is less

Dielectric Withstanding Voltage (DWV):

DWV will be tested at 250% of rated voltage

except for 500V rated parts which will be

tested at 150% of rated voltage.

Performance Requirements:

Reference KEMET Stacked Capacitor Test Methods

(Page 18) for the Group A and Group B test require-

ments per MIL-PRF-49470.

DSCC Website links:

DSCC Website related to MIL-PRF-49470 dimen-

sional, electrical, physical, testing and part number

options:

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MI

L-PRF-49470/prf49470.pdf

DSCC Website for 49470/1 SMPS Capacitors

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MI

L-PRF-49470/prf49470ss1.pdf

DSCC Website for 49470/2 SMPS Capacitors

http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MI

L-PRF-49470/prf49470ss2.pdf

MIL-PRF-49470 SMPS Stacked Capacitors

Ordering Information Requirements per 87106

DSCC Drawing:

The contract or purchase order should specify the

following:

1. Complete Military Part Number

Drawing #: 87106 Dash Number XXX

(Example: 87106-001)

2. Requirements for Delivery of one copy of

the conformance inspection data or cer-

tificate of compliance that parts have

passed conformance inspection with

each shipment of parts by the manufac-

turer. (KEMET will provide a CofC with

each shipment as standard practice)

3. Requirements for packaging and pack-

ing. (KEMET will provide capacitors in a

cardboard box with foam inserts as standard

practice)

*4. Whether the manufacturer performs the

group B inspections, or provides certifi-

cation of compliance with Group B

inspections.

*(KEMET will only offer the CofC option.

KEMET will not perform Group B inspec-

tions on a per lot basis. KEMET's stan-

dard CofC will include notification of con-

formance to Group B inspections.)

5. Requirements for notification of change of prod-

uct to acquiring activity, if applicable.

Electrical Specifications

Operating Temperature Range:

The operating temperature range is -55°C to

125°C.

Rated Voltage: 50V, 100V, 200V, 500V

Temperature Coefficient:

Capacitance: Measured in accordance with

method 305 of MIL-STD-202 (1kHz±100Hz

at 1.0Vrms ± 0.2Vrms open circuit voltage).

Dissipation Factor: Dissipation factor mea-

sured at same conditions as capacitance mea-

surement. For X7R capacitors DF maximum is

2.5%.

Insulation Resistance:

• @25°C, rated voltage: 100GΩor

1,000MΩ-μF, whichever is less

• @125°C, rated voltage: 10GΩor

100MΩ-μF, whichever is less

Dielectric Withstanding Voltage (DWV):

DWV will be tested at 250% of rated volt-

age except for 500V rated parts which will

be tested at 150% of rated voltage.

Performance Characteristics & Test Methods:

The following tests are in accordance with MIL-PRF-

49470

1. Thermal Shock & Voltage Conditioning

2. Solderability

3. Vibration, high frequency

4. Immersion

5. Shock, specified pulse

6. Moisture resistance

7. Resistance to soldering heat

8. Resistance to solvents

9. Life

Marking: Marking shall be in accordance with MIL-

STD-1285, except the parts shall be marked with

the part number as specified in paragraph 1.2 of

87106 with the manufacturer's name or code and

date code minimum. Case sizes 4 & 5 shall be

marked with coded cap and tolerance minimum.

Full marking shall be included on the package.

DSCC Website Notification of 87106

Cancellation:

http://www.dscc.dla.mil/Downloads/MilSpec/

DsccDwg/87106.pdf

Dielectric Voltage Bias = 0V Bias = Vr

BX 50V, 100V ±15% +15%, -25%

BR 200V ±15% +15%, -40%

BQ 500V ±15% +15%, -50%

L1 R N 30 C 106 K S 12

Product Family

L1 = Unencapsulated

L2 = Encapsulated

Temperature

Characteristic

Lead Type

N = Straight pin lead; J = Formed J lead;

L = Formed L lead

Case Code

30 = Case code 3

40 = Case code 4

50 = Case code 5

Voltage Code

5 = 50 VDC 2 = 200 VDC

1 = 100 VDC C = 500 VDC

Capacitance

First two digits represent significant figures.

Third digit specifies number of zeros.

106 = 10 μF

Capacitance Tolerance

K = ±10%

M = ±20%

Maximum Height (A dim)

Encapsulated Unencapsulated

27 = 0.270” 12 = 0.120”

39 = 0.390” 24 = 0.240”

53 = 0.530” 36 = 0.360”

66 = 0.660” 48 = 0.480”

80 = 0.800” 65 = 0.650”

Test Level

B = MIL-PRF-49470 “B” Level

*C = 87106

S = Standard

X = Special

KEMET ORDERING INFORMATION

Dielectric Cap Change

Without Voltage With Voltage

X = BX (50V & 100V) ±15% +15%, -25%

R = BR (200V) ±15% +15%, -40%

Q = BQ (500V) ±15% +15%, -50%

MIL-PRF-49470 ORDERING INFORMATION

M49470 R 01 474 K C N

Performance

Specification

indicating

MIL-PRF-49470

Characteristic

(1.2.1.1)

Performance

Specification

sheet number

(indicating

MIL-PRF-

49470/1)

Capacitance

(1.2.1.2)

Capacitance

Tolerance

(1.2.1.3)

Rated

Voltage

(1.2.1.4)

Configuration

(see 1.2.1.5)

Case Code Qty per Small Box

7.5” x 7.5” Box Size

Qty per Large Box

13.0” x 13.0” Box Size

3 28 104

4 36 144

5 64 225

STACKED MLCC SHIPPING CONTAINER PART QUANTITIES

* 4.2.2 Certification: The acquiring activity, at its discretion, may accept a certificate of compliance

with group B inspections in lieu of performing group B inspections (see 6.1.3 for guidance).

MIL-PRF-49470 SMPS Stacked Capacitors

6© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com

49470 Lead Style

(Last digit of PIN) Lead Style

Stack Height Profile

(Dimension A - Last

two digits of KEMET

PN)

Formed

Lead Height

Inches (mm)

N N (straight) Standard 0.250 Min

(6.35)

J J (formed) Standard 0.070 ± 0.010

(1.78 ±0.25)

L L (formed) Standard 0.070 ± 0.010

(1.78 ±0.25)

49470 STANDARD PROFILE

Case

Code

C ±0.025

(0.635)

(Max)

Number

of Leads

per Side

Min Max

30.45

(11.43)

0.95

(24.13)

1.075

(27.30)

0.50

(12.70) 10

40.40

(10.16)

0.35

(8.89)

0.425

(10.80)

0.44

(11.18) 4

50.25

(6.35)

0.224

(5.69)

0.275

(6.98)

0.30

(7.62) 3

KEMET L1 SERIES UNENCAPSULATED

MIL-PRF-49470/1 DIMENSIONS - IN (MM)

MIL-PRF-49470/1 DIMENSIONS – KEMET SERIES L1

Notes:

1. Dimensions are in inches.

2. Metric equivalents for C, D and E dimensions are provided for general information only.

3. Unless otherwise specified, tolerances are ±.010” (0.25mm)

4. Lead frame configuration is shown as typical above the seating plane. (A seating plane is only required for lead style N.)

5. Refer to the KEMET Part Number and the KEMET Ordering Information for specific maximum A dimension.

For maximum B dimension, add .065” (1.65mm) to the appropriate A dimension. For all lead styles, the number of chips is determined by the

capacitance and voltage rating.

6. For case code 5, dimensions shall be .100” (2.54mm) maximum and .012” (0.30mm) minimum.

7. Lead alignment within pin rows shall be within ±.005” (0.13mm).

Inches mm

0.002 0.05

0.010 0.25

0.020 0.51

0.025 0.64

0.050 1.27

0.055 1.40

0.070 1.78

0.100 2.54

0.224 5.69

0.250 6.35

0.275 6.98

0.300 7.62

0.350 8.89

0.400 10.16

0.425 10.80

0.440 11.18

0.450 11.43

0.500 12.70

0.800 20.32

0.870 22.10

0.950 24.13

1.075 27.30

1.250 31.75

1.350 34.29

1.450 36.83

1.535 38.99

1.950 49.53

2.075 52.70

DIMENSION CONVERSION

INCHES - MM

KEMET L2 SERIES ENCAPSULATED

MIL-PRF-49470/2 DIMENSIONS - IN (MM)

Case

Code

C ±0.025

(±0.635 )

D ±0.025

(±0.635 ) E (Max)

Number of

Leads per

Side

30.45

(11.43)

1.155

(29.3)

0.58

(14.73) 10

40.40

(10.16)

0.485

(12.32)

0.485

(12.32) 4

50.25

(6.35)

0.355

(9.02)

0.355

(9.02) 3

MIL-PRF-49470/2 DIMENSIONS – KEMET SERIES L2

49470 Lead Style

(Last digit of PIN) Lead Style

Stack Height Profile

(Dimension A - Last

two digits of KEMET

PN)

Formed

Lead Height

Inches (mm)

N N (straight) Standard 0.250 Min

(6.35)

J J (formed) Standard 0.070 ± 0.010

(1.78 ±0.25)

L L (formed) Standard 0.070 ± 0.010

(1.78 ±0.25)

49470 STANDARD PROFILE

Notes:

1. Dimensions are in inches.

2. Metric equivalents are given for general information only.

3. Unless otherwise specified, tolerances are ±.010” (0.25mm)

4. Refer to KEMET Part Number and KEMET ordering information.

5. Lead alignment within pin rows shall be within ±.005” (0.13mm).

Inches mm

0.002 0.05

0.010 0.25

0.020 0.51

0.025 0.64

0.050 1.27

0.055 1.40

0.070 1.78

0.100 2.54

0.224 5.69

0.250 6.35

0.275 6.98

0.300 7.62

0.350 8.89

0.400 10.16

0.425 10.80

0.440 11.18

0.450 11.43

0.500 12.70

0.800 20.32

0.870 22.10

0.950 24.13

1.075 27.30

1.250 31.75

1.350 34.29

1.450 36.83

1.535 38.99

1.950 49.53

2.075 52.70

DIMENSION CONVERSION

INCHES - MM

MIL-PRF-49470 SMPS Stacked Capacitors

8© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com

MIL-PRF-49470 & DSCC DRAWING 87106 CROSS REFERENCE

Note: All L1 part numbers are also available in the L2 style.

87106 Dash

Number Military Style KEMET

Part Number

Cap

(μF) Voltage Capacitance

Tolerance

Case

Code

001 M49470X01105KAN L1XN505105KB12 1.0 50 ±10% 5

002 M49470X01105MAN L1XN505105MB12 1.0 50 ±20% 5

003 M49470X01125KAN L1XN505125KB12 1.2 50 ±10% 5

004 M49470X01125MAN L1XN505125MB12 1.2 50 ±20% 5

005 M49470X01155KAN L1XN505155KB24 1.5 50 ±10% 5

006 M49470X01155MAN L1XN505155MB24 1.5 50 ±20% 5

007 M49470X01185KAN L1XN505185KB24 1.8 50 ±10% 5

008 M49470X01185MAN L1XN505185MB24 1.8 50 ±20% 5

009 M49470X01225KAN L1XN505225KB24 2.2 50 ±10% 5

010 M49470X01225MAN L1XN505225MB24 2.2 50 ±20% 5

011 M49470X01275KAN L1XN505275KB36 2.7 50 ±10% 5

012 M49470X01275MAN L1XN505275MB36 2.7 50 ±20% 5

013 M49470X01335KAN L1XN505335KB36 3.3 50 ±10% 5

014 M49470X01335MAN L1XN505335MB36 3.3 50 ±20% 5

015 M49470X01395KAN L1XN505395KB48 3.9 50 ±10% 5

016 M49470X01395MAN L1XN505395MB48 3.9 50 ±20% 5

017 M49470X01475KAN L1XN505475KB48 4.7 50 ±10% 5

018 M49470X01475MAN L1XN505475MB48 4.7 50 ±20% 5

019 M49470X01565KAN L1XN505565KB65 5.6 50 ±10% 5

020 M49470X01565MAN L1XN505565MB65 5.6 50 ±20% 5

021 M49470X01825KAN L1XN405825KB36 8.2 50 ±10% 4

022 M49470X01825MAN L1XN405825MB36 8.2 50 ±20% 4

023 M49470X01106KAN L1XN405106KB48 10 50 ±10% 4

024 M49470X01106MAN L1XN405106MB48 10 50 ±20% 4

025 M49470X01126KAN L1XN405126KB48 12 50 ±10% 4

026 M49470X01126MAN L1XN405126MB48 12 50 ±20% 4

027 M49470X01156KAN L1XN405156KB65 15 50 ±10% 4

028 M49470X01156MAN L1XN405156MB65 15 50 ±20% 4

029 M49470X01186KAN L1XN305186KB24 18 50 ±10% 3

030 M49470X01186MAN L1XN305186MB24 18 50 ±20% 3

031 M49470X01226KAN L1XN305226KB36 22 50 ±10% 3

032 M49470X01226MAN L1XN305226MB36 22 50 ±20% 3

033 M49470X01276KAN L1XN305276KB36 27 50 ±10% 3

034 M49470X01276MAN L1XN305276MB36 27 50 ±20% 3

035 M49470X01336KAN L1XN305336KB36 33 50 ±10% 3

036 M49470X01336MAN L1XN305336MB36 33 50 ±20% 3

037 M49470X01396KAN L1XN305396KB48 39 50 ±10% 3

038 M49470X01396MAN L1XN305396MB48 39 50 ±20% 3

039 M49470X01476KAN L1XN305476KB65 47 50 ±10% 3

040 M49470X01476MAN L1XN305476MB65 47 50 ±20% 3

MIL-PRF-49470 & DSCC DRAWING 87106 CROSS REFERENCE

87106 Dash

Number Military Style KEMET

Part Number

Cap

(μF) Voltage Capacitance

Tolerance

Case

Code

055 M49470X01684KBN L1XN501684KB12 0.68 100 10% 5

056 M49470X01684MBN L1XN501684MB12 0.68 100 20% 5

057 M49470X01824KBN L1XN501824KB24 0.82 100 10% 5

058 M49470X01824MBN L1XN501824MB24 0.82 100 20% 5

059 M49470X01105KBN L1XN501105KB24 1.0 100 10% 5

060 M49470X01105MBN L1XN501105MB24 1.0 100 20% 5

061 M49470X01125KBN L1XN501125KB24 1.2 100 10% 5

062 M49470X01125MBN L1XN501125MB24 1.2 100 20% 5

063 M49470X01155KBN L1XN501155KB36 1.5 100 10% 5

064 M49470X01155MBN L1XN501155MB36 1.5 100 20% 5

065 M49470X01185KBN L1XN501185KB36 1.8 100 10% 5

066 M49470X01185MBN L1XN501185MB36 1.8 100 20% 5

067 M49470X01225KBN L1XN501225KB48 2.2 100 10% 5

068 M49470X01225MBN L1XN501225MB48 2.2 100 20% 5

069 M49470X01275KBN L1XN501275KB48 2.7 100 10% 5

070 M49470X01275MBN L1XN501275MB48 2.7 100 20% 5

071 M49470X01335KBN L1XN501335KB65 3.3 100 10% 5

072 M49470X01335MBN L1XN501335MB65 3.3 100 20% 5

073 M49470X01395KBN L1XN401395KB36 3.9 100 10% 4

074 M49470X01395MBN L1XN401395MB36 3.9 100 20% 4

075 M49470X01475KBN L1XN401475KB36 4.7 100 10% 4

076 M49470X01475MBN L1XN401475MB36 4.7 100 20% 4

077 M49470X01565KBN L1XN401565KB48 5.6 100 10% 4

078 M49470X01565MBN L1XN401565MB48 5.6 100 20% 4

079 M49470X01685KBN L1XN401685KB48 6.8 100 10% 4

080 M49470X01685MBN L1XN401685MB48 6.8 100 20% 4

081 M49470X01825KBN L1XN401825KB65 8.2 100 10% 4

082 M49470X01825MBN L1XN401825MB65 8.2 100 20% 4

083 M49470X01126KBN L1XN301126KB24 12 100 10% 3

084 M49470X01126MBN L1XN301126MB24 12 100 20% 3

085 M49470X01156KBN L1XN301156KB36 15 100 10% 3

086 M49470X01156MBN L1XN301156MB36 15 100 20% 3

087 M49470X01186KBN L1XN301186KB36 18 100 10% 3

088 M49470X01186MBN L1XN301186MB36 18 100 20% 3

089 M49470X01226KBN L1XN301226KB48 22 100 10% 3

090 M49470X01226MBN L1XN301226MB48 22 100 20% 3

091 M49470X01276KBN L1XN301276KB65 27 100 10% 3

092 M49470X01276MBN L1XN301276MB65 27 100 20% 3

113 M49470R01474KCN L1RN502474KB24 0.47 200 10% 5

114 M49470R01474MCN L1RN502474MB24 0.47 200 20% 5

115 M49470R01564KCN L1RN502564KB24 0.56 200 10% 5

Note: All L1 part numbers are also available in the L2 style.

MIL-PRF-49470 SMPS Stacked Capacitors

10 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com

MIL-PRF-49470 & DSCC DRAWING 87106 CROSS REFERENCE

Note: All L1 part numbers are also available in the L2 style.

87106 Dash

Number Military Style KEMET

Part Number

Cap

(μF) Voltage Capacitance

Tolerance

Case

Code

116 M49470R01564MCN L1RN502564MB24 0.56 200 20% 5

117 M49470R01684KCN L1RN502684KB36 0.68 200 10% 5

118 M49470R01684MCN L1RN502684MB36 0.68 200 20% 5

119 M49470R01824KCN L1RN502824KB36 0.82 200 10% 5

120 M49470R01824MCN L1RN502824MB36 0.82 200 20% 5

121 M49470R01105KCN L1RN502105KB48 1.0 200 10% 5

122 M49470R01105MCN L1RN502105MB48 1.0 200 20% 5

123 M49470R01125KCN L1RN502125KB48 1.2 200 10% 5

124 M49470R01125MCN L1RN502125MB48 1.2 200 20% 5

125 M49470R01155KCN L1RN502155KB65 1.5 200 10% 5

126 M49470R01155MCN L1RN502155MB65 1.5 200 20% 5

127 M49470R01185KCN L1RN402185KB36 1.8 200 10% 4

128 M49470R01185MCN L1RN402185MB36 1.8 200 20% 4

129 M49470R01225KCN L1RN402225KB36 2.2 200 10% 4

130 M49470R01225MCN L1RN402225MB36 2.2 200 20% 4

131 M49470R01275KCN L1RN402275KB48 2.7 200 10% 4

132 M49470R01275MCN L1RN402275MB48 2.7 200 20% 4

133 M49470R01335KCN L1RN402335KB48 3.3 200 10% 4

134 M49470R01335MCN L1RN402335MB48 3.3 200 20% 4

135 M49470R01395KCN L1RN402395KB65 3.9 200 10% 4

136 M49470R01395MCN L1RN402395MB65 3.9 200 20% 4

137 M49470R01475KCN L1RN302475KB24 4.7 200 10% 3

138 M49470R01475MCN L1RN302475MB24 4.7 200 20% 3

139 M49470R01565KCN L1RN302565KB24 5.6 200 10% 3

140 M49470R01565MCN L1RN302565MB24 5.6 200 20% 3

141 M49470R01685KCN L1RN302685KB36 6.8 200 10% 3

142 M49470R01685MCN L1RN302685MB36 6.8 200 20% 3

143 M49470R01825KCN L1RN302825KB36 8.2 200 10% 3

144 M49470R01825MCN L1RN302825MB36 8.2 200 20% 3

145 M49470R01106KCN L1RN302106KB48 10 200 10% 3

146 M49470R01106MCN L1RN302106MB48 10 200 20% 3

147 M49470R01126KCN L1RN302126KB65 12 200 10% 3

148 M49470R01126MCN L1RN302126MB65 12 200 20% 3

173 M49470Q01154KEN L1QN50C154KB12 0.15 500 10% 5

174 M49470Q01154MEN L1QN50C154MB12 0.15 500 20% 5

175 M49470Q01184KEN L1QN50C184KB24 0.18 500 10% 5

176 M49470Q01184MEN L1QN50C184MB24 0.18 500 20% 5

MIL-PRF-49470 & DSCC DRAWING 87106 CROSS REFERENCE

Note: All L1 part numbers are also available in the L2 style.

87106 Dash

Number Military Style KEMET

Part Number

Cap

(μF) Voltage Capacitance

Tolerance

Case

Code

177 M49470Q01224KEN L1QN50C224KB24 0.22 500 10% 5

178 M49470Q01224MEN L1QN50C224MB24 0.22 500 20% 5

179 M49470Q01274KEN L1QN50C274KB24 0.27 500 10% 5

180 M49470Q01274MEN L1QN50C274MB24 0.27 500 20% 5

181 M49470Q01334KEN L1QN50C334KB36 0.33 500 10% 5

182 M49470Q01334MEN L1QN50C334MB36 0.33 500 20% 5

183 M49470Q01394KEN L1QN50C394KB36 0.39 500 10% 5

184 M49470Q01394MEN L1QN50C394MB36 0.39 500 20% 5

185 M49470Q01474KEN L1QN50C474KB36 0.47 500 10% 5

186 M49470Q01474MEN L1QN50C474MB36 0.47 500 20% 5

187 M49470Q01564KEN L1QN50C564KB48 0.56 500 10% 5

188 M49470Q01564MEN L1QN50C564MB48 0.56 500 20% 5

189 M49470Q01684KEN L1QN50C684KB65 0.68 500 10% 5

190 M49470Q01684MEN L1QN50C684MB65 0.68 500 20% 5

191 M49470Q01105KEN L1QN40C105KB36 1.0 500 10% 4

192 M49470Q01105MEN L1QN40C105MB36 1.0 500 20% 4

193 M49470Q01125KEN L1QN40C125KB36 1.2 500 10% 4

194 M49470Q01125MEN L1QN40C125MB36 1.2 500 20% 4

195 M49470Q01155KEN L1QN40C155KB48 1.5 500 10% 4

196 M49470Q01155MEN L1QN40C155MB48 1.5 500 20% 4

197 M49470Q01185KEN L1QN40C185KB65 1.8 500 10% 4

198 M49470Q01185MEN L1QN40C185MB65 1.8 500 20% 4

199 M49470Q01275KEN L1QN30C275KB36 2.7 500 10% 3

200 M49470Q01275MEN L1QN30C275MB36 2.7 500 20% 3

201 M49470Q01335KEN L1QN30C335KB36 3.3 500 10% 3

202 M49470Q01335MEN L1QN30C335MB36 3.3 500 20% 3

203 M49470Q01395KEN L1QN30C395KB36 3.9 500 10% 3

204 M49470Q01395MEN L1QN30C395MB36 3.9 500 20% 3

205 M49470Q01475KEN L1QN30C475KB48 4.7 500 10% 3

206 M49470Q01475MEN L1QN30C475MB48 4.7 500 20% 3

207 M49470Q01565KEN L1QN30C565KB65 5.6 500 10% 3

208 M49470Q01565MEN L1QN30C565MB65 5.6 500 20% 3

223 M49470X01685KAN L1XN405685KB36 6.8 50 10% 4

224 M49470X01685MAN L1XN405685MB36 6.8 50 20% 4

229 M49470X01106KBN L1XN301106KB24 10 100 10% 3

230 M49470X01106MBN L1XN301106MB24 10 100 20% 3

231 M49470Q01824KEN L1QN40C824KB36 0.82 500 10% 4

232 M49470Q01824MEN L1QN40C824MB36 0.82 500 20% 4

233 M49470Q01225KEN L1QN30C225KB24 2.2 500 10% 3

234 M49470Q01225MEN L1QN30C225MB24 2.2 500 20% 3

MIL-PRF-49470 SMPS Stacked Capacitors

12 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com

MIL-PRF-49470 & DSCC DRAWING 87106 CROSS REFERENCE

Note: All L1 part numbers are also available in the L2 style.

87106 Dash

Number Military Style KEMET

Part Number

Cap

(μF) Voltage Capacitance

Tolerance

Case

Code

241 M49470X01105KAJ L1XJ505105KB12 1.0 50 10% 5

242 M49470X01105MAJ L1XJ505105MB12 1.0 50 20% 5

243 M49470X01125KAJ L1XJ505125KB12 1.2 50 10% 5

244 M49470X01125MAJ L1XJ505125MB12 1.2 50 20% 5

245 M49470X01155KAJ L1XJ505155KB24 1.5 50 10% 5

246 M49470X01155MAJ L1XJ505155MB24 1.5 50 20% 5

247 M49470X01185KAJ L1XJ505185KB24 1.8 50 10% 5

248 M49470X01185MAJ L1XJ505185MB24 1.8 50 20% 5

249 M49470X01225KAJ L1XJ505225KB24 2.2 50 10% 5

250 M49470X01225MAJ L1XJ505225MB24 2.2 50 20% 5

251 M49470X01275KAJ L1XJ505275KB36 2.7 50 10% 5

252 M49470X01275MAJ L1XJ505275MB36 2.7 50 20% 5

253 M49470X01335KAJ L1XJ505335KB36 3.3 50 10% 5

254 M49470X01335MAJ L1XJ505335MB36 3.3 50 20% 5

255 M49470X01395KAJ L1XJ505395KB48 3.9 50 10% 5

256 M49470X01395MAJ L1XJ505395MB48 3.9 50 20% 5

257 M49470X01475KAJ L1XJ505475KB48 4.7 50 10% 5

258 M49470X01475MAJ L1XJ505475MB48 4.7 50 20% 5

259 M49470X01565KAJ L1XJ505565KB65 5.6 50 10% 5

260 M49470X01565MAJ L1XJ505565MB65 5.6 50 20% 5

261 M49470X01685KAJ L1XJ405685KB36 6.8 50 10% 4

262 M49470X01685MAJ L1XJ405685MB36 6.8 50 20% 4

263 M49470X01825KAJ L1XJ405825KB36 8.2 50 10% 4

264 M49470X01825MAJ L1XJ405825MB36 8.2 50 20% 4

265 M49470X01106KAJ L1XJ405106KB48 10 50 10% 4

266 M49470X01106MAJ L1XJ405106MB48 10 50 20% 4

267 M49470X01126KAJ L1XJ405126KB48 12 50 10% 4

268 M49470X01126MAJ L1XJ405126MB48 12 50 20% 4

269 M49470X01156KAJ L1XJ405156KB65 15 50 10% 4

270 M49470X01156MAJ L1XJ405156MB65 15 50 20% 4

271 M49470X01186KAJ L1XJ305186KB24 18 50 10% 3

272 M49470X01186MAJ L1XJ305186MB24 18 50 20% 3

273 M49470X01226KAJ L1XJ305226KB36 22 50 10% 3

274 M49470X01226MAJ L1XJ305226MB36 22 50 20% 3

275 M49470X01276KAJ L1XJ305276KB36 27 50 10% 3

276 M49470X01276MAJ L1XJ305276MB36 27 50 20% 3

277 M49470X01336KAJ L1XJ305336KB36 33 50 10% 3

278 M49470X01336MAJ L1XJ305336MB36 33 50 20% 3

279 M49470X01396KAJ L1XJ305396KB48 39 50 10% 3

280 M49470X01396MAJ L1XJ305396MB48 39 50 20% 3

281 M49470X01476KAJ L1XJ305476KB65 47 50 10% 3

282 M49470X01476MAJ L1XJ305476MB65 47 50 20% 3

MIL-PRF-49470 & DSCC DRAWING 87106 CROSS REFERENCE

Note: All L1 part numbers are also available in the L2 style.

87106 Dash

Number Military Style KEMET

Part Number

Cap

(μF) Voltage Capacitance

Tolerance

Case

Code

301 M49470X01684KBJ L1XJ501684KB12 0.68 100 10% 5

302 M49470X01684MBJ L1XJ501684MB12 0.68 100 20% 5

303 M49470X01824KBJ L1XJ501824KB24 0.82 100 10% 5

304 M49470X01824MBJ L1XJ501824MB24 0.82 100 20% 5

305 M49470X01105KBJ L1XJ501105KB24 1.0 100 10% 5

306 M49470X01105MBJ L1XJ501105MB24 1.0 100 20% 5

307 M49470X01125KBJ L1XJ501125KB24 1.2 100 10% 5

308 M49470X01125MBJ L1XJ501125MB24 1.2 100 20% 5

309 M49470X01155KBJ L1XJ501155KB36 1.5 100 10% 5

310 M49470X01155MBJ L1XJ501155MB36 1.5 100 20% 5

311 M49470X01185KBJ L1XJ501185KB36 1.8 100 10% 5

312 M49470X01185MBJ L1XJ501185MB36 1.8 100 20% 5

313 M49470X01225KBJ L1XJ501225KB48 2.2 100 10% 5

314 M49470X01225MBJ L1XJ501225MB48 2.2 100 20% 5

315 M49470X01275KBJ L1XJ501275KB48 2.7 100 10% 5

316 M49470X01275MBJ L1XJ501275MB48 2.7 100 20% 5

317 M49470X01335KBJ L1XJ501335KB65 3.3 100 10% 5

318 M49470X01335MBJ L1XJ501335MB65 3.3 100 20% 5

319 M49470X01395KBJ L1XJ401395KB36 3.9 100 10% 4

320 M49470X01395MBJ L1XJ401395MB36 3.9 100 20% 4

321 M49470X01475KBJ L1XJ401475KB36 4.7 100 10% 4

322 M49470X01475MBJ L1XJ401475MB36 4.7 100 20% 4

323 M49470X01565KBJ L1XJ401565KB48 5.6 100 10% 4

324 M49470X01565MBJ L1XJ401565MB48 5.6 100 20% 4

325 M49470X01685KBJ L1XJ401685KB48 6.8 100 10% 4

326 M49470X01685MBJ L1XJ401685MB48 6.8 100 20% 4

327 M49470X01825KBJ L1XJ401825KB65 8.2 100 10% 4

328 M49470X01825MBJ L1XJ401825MB65 8.2 100 20% 4

329 M49470X01106KBJ L1XJ301106KB24 10 100 10% 3

330 M49470X01106MBJ L1XJ301106MB24 10 100 20% 3

331 M49470X01126KBJ L1XJ301126KB24 12 100 10% 3

332 M49470X01126MBJ L1XJ301126MB24 12 100 20% 3

333 M49470X01156KBJ L1XJ301156KB36 15 100 10% 3

334 M49470X01156MBJ L1XJ301156MB36 15 100 20% 3

335 M49470X01186KBJ L1XJ301186KB36 18 100 10% 3

336 M49470X01186MBJ L1XJ301186MB36 18 100 20% 3

337 M49470X01226KBJ L1XJ301226KB48 22 100 10% 3

338 M49470X01226MBJ L1XJ301226MB48 22 100 20% 3

339 M49470X01276KBJ L1XJ301276KB65 27 100 10% 3

340 M49470X01276MBJ L1XJ301276MB65 27 100 20% 3

MIL-PRF-49470 SMPS Stacked Capacitors

14 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com

MIL-PRF-49470 & DSCC DRAWING 87106 CROSS REFERENCE

Note: All L1 part numbers are also available in the L2 style.

87106 Dash

Number Military Style KEMET

Part Number

Cap

(μF) Voltage Capacitance

Tolerance

Case

Code

361 M49470R01474KCJ L1RJ502474KB24 0.47 200 10% 5

362 M49470R01474MCJ L1RJ502474MB24 0.47 200 20% 5

363 M49470R01564KCJ L1RJ502564KB24 0.56 200 10% 5

364 M49470R01564MCJ L1RJ502564MB24 0.56 200 20% 5

365 M49470R01684KCJ L1RJ502684KB36 0.68 200 10% 5

366 M49470R01684MCJ L1RJ502684MB36 0.68 200 20% 5

367 M49470R01824KCJ L1RJ502824KB36 0.82 200 10% 5

368 M49470R01824MCJ L1RJ502824MB36 0.82 200 20% 5

369 M49470R01105KCJ L1RJ502105KB48 1.0 200 10% 5

370 M49470R01105MCJ L1RJ502105MB48 1.0 200 20% 5

371 M49470R01125KCJ L1RJ502125KB48 1.2 200 10% 5

372 M49470R01125MCJ L1RJ502125MB48 1.2 200 20% 5

373 M49470R01155KCJ L1RJ502155KB65 1.5 200 10% 5

374 M49470R01155MCJ L1RJ502155MB65 1.5 200 20% 5

375 M49470R01185KCJ L1RJ402185KB36 1.8 200 10% 4

376 M49470R01185MCJ L1RJ402185MB36 1.8 200 20% 4

377 M49470R01225KCJ L1RJ402225KB36 2.2 200 10% 4

378 M49470R01225MCJ L1RJ402225MB36 2.2 200 20% 4

379 M49470R01275KCJ L1RJ402275KB48 2.7 200 10% 4

380 M49470R01275MCJ L1RJ402275MB48 2.7 200 20% 4

381 M49470R01335KCJ L1RJ402335KB48 3.3 200 10% 4

382 M49470R01335MCJ L1RJ402335MB48 3.3 200 20% 4

383 M49470R01395KCJ L1RJ402395KB65 3.9 200 10% 4

384 M49470R01395MCJ L1RJ402395MB65 3.9 200 20% 4

385 M49470R01475KCJ L1RJ302475KB24 4.7 200 10% 3

386 M49470R01475MCJ L1RJ302475MB24 4.7 200 20% 3

387 M49470R01565KCJ L1RJ302565KB24 5.6 200 10% 3

388 M49470R01565MCJ L1RJ302565MB24 5.6 200 20% 3

389 M49470R01685KCJ L1RJ302685KB36 6.8 200 10% 3

390 M49470R01685MCJ L1RJ302685MB36 6.8 200 20% 3

391 M49470R01825KCJ L1RJ302825KB36 8.2 200 10% 3

392 M49470R01825MCJ L1RJ302825MB36 8.2 200 20% 3

393 M49470R01106KCJ L1RJ302106KB48 10 200 10% 3

394 M49470R01106MCJ L1RJ302106MB48 10 200 20% 3

395 M49470R01126KCJ L1RJ302126KB65 12 200 10% 3

396 M49470R01126MCJ L1RJ302126MB65 12 200 20% 3

421 M49470Q01154KEJ L1QJ50C154KB12 0.15 500 10% 5

422 M49470Q01154MEJ L1QJ50C154MB12 0.15 500 20% 5

423 M49470Q01184KEJ L1QJ50C184KB24 0.18 500 10% 5

424 M49470Q01184MEJ L1QJ50C184MB24 0.18 500 20% 5

MIL-PRF-49470 & DSCC DRAWING 87106 CROSS REFERENCE

Note: All L1 part numbers are also available in the L2 style.

87106 Dash

Number Military Style KEMET

Part Number

Cap

(μF) Voltage Capacitance

Tolerance

Case

Code

425 M49470Q01224KEJ L1QJ50C224KB24 0.22 500 10% 5

426 M49470Q01224MEJ L1QJ50C224MB24 0.22 500 20% 5

427 M49470Q01274KEJ L1QJ50C274KB24 0.27 500 10% 5

428 M49470Q01274MEJ L1QJ50C274MB24 0.27 500 20% 5

429 M49470Q01334KEJ L1QJ50C334KB36 0.33 500 10% 5

430 M49470Q01334MEJ L1QJ50C334MB36 0.33 500 20% 5

431 M49470Q01394KEJ L1QJ50C394KB36 0.39 500 10% 5

432 M49470Q01394MEJ L1QJ50C394MB36 0.39 500 20% 5

433 M49470Q01474KEJ L1QJ50C474KB36 0.47 500 10% 5

434 M49470Q01474MEJ L1QJ50C474MB36 0.47 500 20% 5

435 M49470Q01564KEJ L1QJ50C564KB48 0.56 500 10% 5

436 M49470Q01564MEJ L1QJ50C564MB48 0.56 500 20% 5

437 M49470Q01684KEJ L1QJ50C684KB65 0.68 500 10% 5

438 M49470Q01684MEJ L1QJ50C684MB65 0.68 500 20% 5

439 M49470Q01824KEJ L1QJ40C824KB36 0.82 500 10% 4

440 M49470Q01824MEJ L1QJ40C824MB36 0.82 500 20% 4

441 M49470Q01105KEJ L1QJ40C105KB36 1.0 500 10% 4

442 M49470Q01105MEJ L1QJ40C105MB36 1.0 500 20% 4

443 M49470Q01125KEJ L1QJ40C125KB36 1.2 500 10% 4

444 M49470Q01125MEJ L1QJ40C125MB36 1.2 500 20% 4

445 M49470Q01155KEJ L1QJ40C155KB48 1.5 500 10% 4

446 M49470Q01155MEJ L1QJ40C155MB48 1.5 500 20% 4

447 M49470Q01185KEJ L1QJ40C185KB65 1.8 500 10% 4

448 M49470Q01185MEJ L1QJ40C185MB65 1.8 500 20% 4

449 M49470Q01225KEJ L1QJ30C225KB24 2.2 500 10% 3

450 M49470Q01225MEJ L1QJ30C225MB24 2.2 500 20% 3

451 M49470Q01275KEJ L1QJ30C275KB36 2.7 500 10% 3

452 M49470Q01275MEJ L1QJ30C275MB36 2.7 500 20% 3

453 M49470Q01335KEJ L1QJ30C335KB36 3.3 500 10% 3

454 M49470Q01335MEJ L1QJ30C335MB36 3.3 500 20% 3

455 M49470Q01395KEJ L1QJ30C395KB36 3.9 500 10% 3

456 M49470Q01395MEJ L1QJ30C395MB36 3.9 500 20% 3

457 M49470Q01475KEJ L1QJ30C475KB48 4.7 500 10% 3

458 M49470Q01475MEJ L1QJ30C475MB48 4.7 500 20% 3

459 M49470Q01565KEJ L1QJ30C565KB65 5.6 500 10% 3

460 M49470Q01565MEJ L1QJ30C565MB65 5.6 500 20% 3

MIL-PRF-49470 SMPS Stacked Capacitors

MIL-PRF-49470 P/N KEMET P/N Cap

(μF)

Case

Code

50 Volts

M49470X01105(1)A(2) L1X(2)505105(1)B12 1.0 5

M49470X01125(1)A(2) L1X(2)505125(1)B12 1.2 5

M49470X01155(1)A(2) L1X(2)505155(1)B24 1.5 5

M49470X01185(1)A(2) L1X(2)505185(1)B24 1.8 5

M49470X01225(1)A(2) L1X(2)505225(1)B24 2.2 5

M49470X01275(1)A(2) L1X(2)505275(1)B36 2.7 5

M49470X01335(1)A(2) L1X(2)505335(1)B36 3.3 5

M49470X01395(1)A(2) L1X(2)505395(1)B48 3.9 5

M49470X01475(1)A(2) L1X(2)505475(1)B48 4.7 5

M49470X01565(1)A(2) L1X(2)505565(1)B65 5.6 5

M49470X01685(1)A(2) L1X(2)405685(1)B36 6.8 4

M49470X01825(1)A(2) L1X(2)405825(1)B36 8.2 4

M49470X01106(1)A(2) L1X(2)405106(1)B48 10 4

M49470X01126(1)A(2) L1X(2)405126(1)B48 12 4

M49470X01156(1)A(2) L1X(2)405156(1)B65 15 4

M49470X01186(1)A(2) L1X(2)305186(1)B24 18 3

M49470X01226(1)A(2) L1X(2)305226(1)B36 22 3

M49470X01276(1)A(2) L1X(2)305276(1)B36 27 3

M49470X01336(1)A(2) L1X(2)305336(1)B36 33 3

M49470X01396(1)A(2) L1X(2)305396(1)B48 39 3

M49470X01476(1)A(2) L1X(2)305476(1)B65 47 3

100 Volts

M49470X01684(1)B(2) L1X(2)501684(1)B12 0.68 5

M49470X01824(1)B(2) L1X(2)501824(1)B24 0.82 5

M49470X01105(1)B(2) L1X(2)501105(1)B24 1.0 5

M49470X01125(1)B(2) L1X(2)501125(1)B24 1.2 5

M49470X01155(1)B(2) L1X(2)501155(1)B36 1.5 5

M49470X01185(1)B(2) L1X(2)501185(1)B36 1.8 5

M49470X01225(1)B(2) L1X(2)501225(1)B48 2.2 5

M49470X01275(1)B(2) L1X(2)501275(1)B48 2.7 5

M49470X01335(1)B(2) L1X(2)501335(1)B65 3.3 5

M49470X01395(1)B(2) L1X(2)401395(1)B36 3.9 4

M49470X01475(1)B(2) L1X(2)401475(1)B36 4.7 4

M49470X01565(1)B(2) L1X(2)401565(1)B48 5.6 4

M49470X01685(1)B(2) L1X(2)401685(1)B48 6.8 4

M49470X01825(1)B(2) L1X(2)401825(1)B65 8.2 4

M49470X01106(1)B(2) L1X(2)301106(1)B24 10 3

M49470X01126(1)B(2) L1X(2)301126(1)B24 12 3

M49470X01156(1)B(2) L1X(2)301156(1)B36 15 3

M49470X01186(1)B(2) L1X(2)301186(1)B36 18 3

M49470X01226(1)B(2) L1X(2)301226(1)B48 22 3

M49470X01276(1)B(2) L1X(2)301276(1)B65 27 3

MIL-PRF-49470/1 PART NUMBER CROSS REFERENCE

MIL-PRF-49470 P/N KEMET P/N Cap

(μF)

Case

Code

200 Volts

M49470R01474(1)C(2) L1R(2)502474(1)B24 0.47 5

M49470R01564(1)C(2) L1R(2)502564(1)B24 0.56 5

M49470R01684(1)C(2) L1R(2)502684(1)B36 0.68 5

M49470R01824(1)C(2) L1R(2)502824(1)B36 0.82 5

M49470R01105(1)C(2) L1R(2)502105(1)B48 1.0 5

M49470R01125(1)C(2) L1R(2)502125(1)B48 1.2 5

M49470R01155(1)C(2) L1R(2)502155(1)B65 1.5 5

M49470R01185(1)C(2) L1R(2)402185(1)B36 1.8 4

M49470R01225(1)C(2) L1R(2)402225(1)B36 2.2 4

M49470R01275(1)C(2) L1R(2)402275(1)B48 2.7 4

M49470R01335(1)C(2) L1R(2)402335(1)B48 3.3 4

M49470R01395(1)C(2) L1R(2)402395(1)B65 3.9 4

M49470R01475(1)C(2) L1R(2)302475(1)B24 4.7 3

M49470R01565(1)C(2) L1R(2)302565(1)B24 5.6 3

M49470R01685(1)C(2) L1R(2)302685(1)B36 6.8 3

M49470R01825(1)C(2) L1R(2)302825(1)B36 8.2 3

M49470R01106(1)C(2) L1R(2)302106(1)B48 10 3

M49470R01126(1)C(2) L1R(2)302126(1)B65 12 3

500 Volts

M49470Q01154(1)E(2) L1Q(2)50C154(1)B12 0.15 5

M49470Q01184(1)E(2) L1Q(2)50C184(1)B24 0.18 5

M49470Q01224(1)E(2) L1Q(2)50C224(1)B24 0.22 5

M49470Q01274(1)E(2) L1Q(2)50C274(1)B24 0.27 5

M49470Q01334(1)E(2) L1Q(2)50C334(1)B36 0.33 5

M49470Q01394(1)E(2) L1Q(2)50C394(1)B36 0.39 5

M49470Q01474(1)E(2) L1Q(2)50C474(1)B36 0.47 5

M49470Q01564(1)E(2) L1Q(2)50C564(1)B48 0.56 5

M49470Q01684(1)E(2) L1Q(2)50C684(1)B65 0.68 5

M49470Q01824(1)E(2) L1Q(2)40C824(1)B36 0.82 4

M49470Q01105(1)E(2) L1Q(2)40C105(1)B36 1.0 4

M49470Q01125(1)E(2) L1Q(2)40C125(1)B36 1.2 4

M49470Q01155(1)E(2) L1Q(2)40C155(1)B48 1.5 4

M49470Q01185(1)E(2) L1Q(2)40C185(1)B65 1.8 4

M49470Q01225(1)E(2) L1Q(2)30C225(1)B24 2.2 3

M49470Q01275(1)E(2) L1Q(2)30C275(1)B36 2.7 3

M49470Q01335(1)E(2) L1Q(2)30C335(1)B36 3.3 3

M49470Q01395(1)E(2) L1Q(2)30C395(1)B36 3.9 3

M49470Q01475(1)E(2) L1Q(2)30C475(1)B48 4.7 3

M49470Q01565(1)E(2) L1Q(2)30C565(1)B65 5.6 3

To complete Part Numbers, insert the following letters:

(1) Available Capacitance Tolerances: K, M

(2) Available Lead Styles: N, J, L

MIL-PRF-49470 SMPS Stacked Capacitors

MIL-PRF-49470/2 PART NUMBER CROSS REFERENCE

MIL-PRF-49470 P/N KEMET P/N Cap

(μF)

Case

Code

50 Volts

M49470X02105(1)A(2) L2X(2)505105(1)B27 1.0 5

M49470X02125(1)A(2) L2X(2)505125(1)B27 1.2 5

M49470X02155(1)A(2) L2X(2)505155(1)B39 1.5 5

M49470X02185(1)A(2) L2X(2)505185(1)B39 1.8 5

M49470X02225(1)A(2) L2X(2)505225(1)B39 2.2 5

M49470X02275(1)A(2) L2X(2)505275(1)B53 2.7 5

M49470X02335(1)A(2) L2X(2)505335(1)B53 3.3 5

M49470X02395(1)A(2) L2X(2)505395(1)B66 3.9 5

M49470X02475(1)A(2) L2X(2)505475(1)B66 4.7 5

M49470X02565(1)A(2) L2X(2)505565(1)B80 5.6 5

M49470X02685(1)A(2) L2X(2)405685(1)B53 6.8 4

M49470X02825(1)A(2) L2X(2)405825(1)B53 8.2 4

M49470X02106(1)A(2) L2X(2)405106(1)B66 10 4

M49470X02126(1)A(2) L2X(2)405126(1)B66 12 4

M49470X02156(1)A(2) L2X(2)405156(1)B80 15 4

M49470X02186(1)A(2) L2X(2)305186(1)B39 18 3

M49470X02226(1)A(2) L2X(2)305226(1)B53 22 3

M49470X02276(1)A(2) L2X(2)305276(1)B53 27 3

M49470X02336(1)A(2) L2X(2)305336(1)B53 33 3

M49470X02396(1)A(2) L2X(2)305396(1)B66 39 3

M49470X02476(1)A(2) L2X(2)305476(1)B80 47 3

100 Volts

M49470X02684(1)B(2) L2X(2)501684(1)B27 0.68 5

M49470X02824(1)B(2) L2X(2)501824(1)B39 0.82 5

M49470X02105(1)B(2) L2X(2)501105(1)B39 1.0 5

M49470X02125(1)B(2) L2X(2)501125(1)B39 1.2 5

M49470X02155(1)B(2) L2X(2)501155(1)B53 1.5 5

M49470X02185(1)B(2) L2X(2)501185(1)B53 1.8 5

M49470X02225(1)B(2) L2X(2)501225(1)B66 2.2 5

M49470X02275(1)B(2) L2X(2)501275(1)B66 2.7 5

M49470X02335(1)B(2) L2X(2)501335(1)B80 3.3 5

M49470X02395(1)B(2) L2X(2)401395(1)B53 3.9 4

M49470X02475(1)B(2) L2X(2)401475(1)B53 4.7 4

M49470X02565(1)B(2) L2X(2)401565(1)B66 5.6 4

M49470X02685(1)B(2) L2X(2)401685(1)B66 6.8 4

M49470X02825(1)B(2) L2X(2)401825(1)B80 8.2 4

M49470X02106(1)B(2) L2X(2)301106(1)B39 10 3

M49470X02126(1)B(2) L2X(2)301126(1)B39 12 3

M49470X02156(1)B(2) L2X(2)301156(1)B53 15 3

M49470X02186(1)B(2) L2X(2)301186(1)B53 18 3

M49470X02226(1)B(2) L2X(2)301226(1)B66 22 3

M49470X02276(1)B(2) L2X(2)301276(1)B80 27 3

MIL-PRF-49470 P/N KEMET P/N Cap

(μF)

Case

Code

200 Volts

M49470R02474(1)C(2) L2R(2)502474(1)B39 0.47 5

M49470R02564(1)C(2) L2R(2)502564(1)B39 0.56 5

M49470R02684(1)C(2) L2R(2)502684(1)B53 0.68 5

M49470R02824(1)C(2) L2R(2)502824(1)B53 0.82 5

M49470R02105(1)C(2) L2R(2)502105(1)B66 1.0 5

M49470R02125(1)C(2) L2R(2)502125(1)B66 1.2 5

M49470R02155(1)C(2) L2R(2)502155(1)B80 1.5 5

M49470R02185(1)C(2) L2R(2)402185(1)B53 1.8 4

M49470R02225(1)C(2) L2R(2)402225(1)B53 2.2 4

M49470R02275(1)C(2) L2R(2)402275(1)B66 2.7 4

M49470R02335(1)C(2) L2R(2)402335(1)B66 3.3 4

M49470R02395(1)C(2) L2R(2)402395(1)B80 3.9 4

M49470R02475(1)C(2) L2R(2)302475(1)B39 4.7 3

M49470R02565(1)C(2) L2R(2)302565(1)B39 5.6 3

M49470R02685(1)C(2) L2R(2)302685(1)B53 6.8 3

M49470R02825(1)C(2) L2R(2)302825(1)B53 8.2 3

M49470R02106(1)C(2) L2R(2)302106(1)B66 10 3

M49470R02126(1)C(2) L2R(2)302126(1)B80 12 3

500 Volts

M49470Q02154(1)E(2) L2Q(2)50C154(1)B27 0.15 5

M49470Q02184(1)E(2) L2Q(2)50C184(1)B39 0.18 5

M49470Q02224(1)E(2) L2Q(2)50C224(1)B39 0.22 5

M49470Q02274(1)E(2) L2Q(2)50C274(1)B39 0.27 5

M49470Q02334(1)E(2) L2Q(2)50C334(1)B53 0.33 5

M49470Q02394(1)E(2) L2Q(2)50C394(1)B53 0.39 5

M49470Q02474(1)E(2) L2Q(2)50C474(1)B53 0.47 5

M49470Q02564(1)E(2) L2Q(2)50C564(1)B66 0.56 5

M49470Q02684(1)E(2) L2Q(2)50C684(1)B80 0.68 5

M49470Q02824(1)E(2) L2Q(2)40C824(1)B53 0.82 4

M49470Q02105(1)E(2) L2Q(2)40C105(1)B53 1.0 4

M49470Q02125(1)E(2) L2Q(2)40C125(1)B53 1.2 4

M49470Q02155(1)E(2) L2Q(2)40C155(1)B66 1.5 4

M49470Q02185(1)E(2) L2Q(2)40C185(1)B80 1.8 4

M49470Q02225(1)E(2) L2Q(2)30C225(1)B39 2.2 3

M49470Q02275(1)E(2) L2Q(2)30C275(1)B53 2.7 3

M49470Q02335(1)E(2) L2Q(2)30C335(1)B53 3.3 3

M49470Q02395(1)E(2) L2Q(2)30C395(1)B53 3.9 3

M49470Q02475(1)E(2) L2Q(2)30C475(1)B66 4.7 3

M49470Q02565(1)E(2) L2Q(2)30C565(1)B80 5.6 3

To complete Part Numbers, insert the following letters:

(1) Available Capacitance Tolerances: K, M

(2) Available Lead Styles: N, J, L

KEMET STACKED CAPACITORS TEST METHODS

KEMET Stacked

Capacitors Test Methods KEMET

Standard

(S)

Customer Drawing

(X)

MIL-PRF-49470

B Level

Test Description Test Method

In-Process Inspection

Ultrasonic Scanning

(C-SAM)

Meet EIA-469

Criteria Not Required Optional per SCD Not Required

DPA Analysis EIA-469 Not Required Optional per SCD Not Required

In-Process Visual

Inspection Per MIL-PRF-49470

Yes

(KEMET Std)

Yes

(KEMET Std) Yes (KEMET Std)

Group A Requirements

Thermal Shock

MIL-STD-202

Method 107 Not Required Optional per SCD Yes 5 Cycles

Voltage Conditioning Per MIL-PRF-49470 Not Required Optional per SCD Yes 96 hrs ( Stack )

≤≤200V 200%Vr @125°C

500V 120%Vr @125°C

Visual and

Mechanical Inspection Per MIL-PRF-49470

Yes

(KEMET Std) Yes (Per Lot) Yes (Per Lot)

Solderability

MIL-STD-202

Method 208 Not Required Optional per SCD

Yes

(Per Inspection Lot)

DPA Analysis EIA-469 Not Required Optional per SCD Not Required

Group B Requirements

Voltage-Temperature

Limits (TCVC) Per MIL-PRF-49470 Not Required Optional per SCD Yes (Periodic)

Resistance to Solvents

MIL-STD-202

Method 215 Not Required Optional per SCD Yes (Periodic)

Terminal Strength

MIL-STD-202

Method 211 Not Required Optional per SCD Yes (Periodic)

Resistance to

Soldering Heat

MIL-STD-202

Method 210 Not Required Optional per SCD Yes (Periodic)

Moisture Resistance

MIL-STD-202

Method 106 Not Required Optional per SCD Yes (Periodic)

Marking Legibility Per MIL-PRF-49470 Not Required Optional per SCD Yes (Periodic)

Low Voltage

Humidity Testing

MIL-STD-202

Method 103 Not Required Optional per SCD Not Required

Life Test

MIL-STD-202

Method 108

≤≤200V 200%Vr @125°C Not Required Optional per SCD Yes (Periodic)

500V 120%Vr @125°C Not Required Optional per SCD Yes (Periodic)

Thermal Shock

MIL-STD-202

Method 107 Not Required Optional per SCD Not Required

Visual/100% Electrial

Testing Cap/DF/IR/DWV Standard Yes Yes Yes

APPLICATION NOTES FOR MIL-PRF-49470

Note: DSCC-DWG-87106 for similarly constructed parts was CANCELED Jan 2005.

Use MIL-PRF-49470 parts as a direct replacement.

When available MIL-PRF-49470 SMPS capacitors are preferred over DSCC-DWG-87106 capacitors. The

MIL-PRF-49470 specification was developed as part of a cooperative effort amongst the US Military, NASA

and the SMPS suppliers to produce a robust replacement for the DSCC drawing. The MIL spec product pro-

vides additional quality assurance provisions which are NOT required by the DSCC drawing. Some of the ben-

efits of the MIL-PRF-49470 product over the DSCC-DWG-87106 product include:

Requirement MIL-PRF-49470 DSCC-DWG-87106

Formal Qualification Process (QPL Established) Yes No

MIL-STD-790 Compliance Yes No

DSCC Audits Yes No

Routine Qualification Maintenance Testing (ie.,

Life Testing) Yes No

Group A Percent Defective Allowed (PDA)

Specified Yes No

Prohibits Mixing of Chips from Different

Production Lots within a Single SMPS Stack Lot Yes No

SOLDERING RECOMMENDATIONS FOR CERAMIC STACKED CAPACITORS

Ceramic stacked capacitors are large mass devices and much care should be taken when soldering these

capacitors. For this reason, hand soldering is not a recommended soldering method for these devices.

Following the proper soldering guidelines is critical in order to prevent thermal cracking.

PRE-HEATING AND REFLOW PROFILE

Due to differences in the coefficient of thermal expansion for the different materials of construction it is critical

to monitor and control the heating and cooling rates during the soldering process. During the reflow soldering

process, the maximum recommended heating and cooling rate (dT/dt) is 4°C/second. To ensure optimal com-

ponent reliability, KEMET's recommended heating and cooling rate is =2°C/second. After soldering, the capac-

itors should be air cooled to room temperature before further processing. Forced air cooling is not recom-

mended.

KEMET RECOMMENDED SOLDER REFLOW PROFILE

MIL-PRF-49470 SMPS Stacked Capacitors

World Sales Headquarters

KEMET Electronics Corporation

P.O. Box 5928

Greenville, SC 29606

Phone: 864-963-6300

Europe

KEMET Electronics S.A.

15bis chemin des Mines

CH-1202 Geneva,

Switzerland

Phone: 41-22-715-0100

Asia

KEMET Electronics Marketing PTE Ltd.

73 Bukit Timah Road

#05-01 Rex House

Singapore, 229832, Singapore

Phone: 65-6586-1900

KEMET Electronics Asia Ltd.

30 Canton Road, Room 1512

SilverCord Tower II

Tsimshatshui, Kowloon

Hong Kong

Phone: 852-2305-1168

KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET

does not assume any responsibility for infringement that might result from the use of KEMET capacitors in potential circuit designs.