2 April 2007 Rev 3 1/13
13
■Low on-voltage drop (Vcesat)
■Low CRES / CIES ratio (no cross-conduction
susceptibility)
Description
Using the latest high voltage technology based on
a patented strip layout, STMicroelectronics has
designed an advanced family of IGBTs, the
PowerMESH™ IGBTs, with outstanding
performances. The suffix "H" identifies a family
optimized for high frequency applications in order
to achieve very high switching performances
(reduced tfall) manta in ing a low voltage drop.
Applications
■High frequency motor controls
■SMPS and PFC in both hard switch and
resonant topologies
■Motor drivers
Internal schematic diagram
Features
Type VCES
VCE(sat)
(Max)@ 25°C
IC
@100°C
STGP10NC60H 600V < 2.5V 10A
TO-220
123
STGP10NC60H
N-channel 10A - 600V - TO-220
Very fast PowerMESH™ IGBT
www.st.com
Order code
Part number Marking Package Packaging
STGP10NC60H GP10NC60H TO-220 Tube
Contents STGP10NC60H
2/13
Contents
1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1 Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3 Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
5 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
STGP10NC60H Electrical ratings
3/13
1 Electrical ratings
Table 1. Absolute maximum ratings
Symbol Parameter Value Unit
VCES Collector-emitter voltage (VGS = 0) 600 V
IC(1)
1. Calculated according to the iterative formula:
Collector current (continuous) at TC = 25°C 20 A
IC(1) Collector current (continuous) at TC = 100°C 10 A
ICL(2)
2. Vclamp=480V, Tj=150°C, RG=10Ω, VGE=15V
Collector current (pulsed) 40 A
VGE Gate-emitter voltage ±20 V
PTOT Total dissipation at TC = 25°C 60 W
TjOperating junction temperature – 55 to 150 °C
Table 2. Thermal resistance
Symbol Parameter Value Unit
Rthj-case Thermal resistance junction-case max 2.08 °C/W
Rthj-amb Thermal resistance junction-ambient max 62.5 °C/W
ICTC
()
TJMAX TC
–
RTHJ C–VCESAT MAX()
TCIC
,()×
------------------------------------------------------------------------------------------------------=
Electrical characteristics STGP10NC60H
4/13
2 Electrical characteristics
(TCASE=25°C unless otherwise specified)
Table 3. Static
Symbol Parameter Test conditions Min. Typ. Max. Unit
VBR(CES) Collector-emitter
breakdown voltage IC= 1mA, VGE= 0 600 V
ICES
Collector cut-off current
(VGE = 0)
VCE= Max rating,TC= 25°C
VCE=Max rating,TC= 125°C
150
1
µA
mA
IGES
Gate-emitter leakage
current (VCE = 0) VGE= ±20V, VCE= 0 ±100 nA
VGE(th) Gate threshold voltage VCE= VGE, IC= 250 µA 3.75 5.75 V
VCE(sat) Collector-emitter saturation
voltage
VGE= 15V, IC= 5A
VGE= 15V, IC= 5A, Tc= 125°C
1.9
1.7
2.5 V
V
gfs Forward transconductance VCE = 15V, IC= 5A 3.5 S
Table 4. Dynamic
Symbol Parameter Test conditions Min. Typ. Max. Unit
Cies
Coes
Cres
Input capacitance
Output capacitance
Reverse transfer
capacitance
VCE = 25V, f = 1MHz,
VGE = 0
365
43
8.3
pF
pF
pF
Qg
Qge
Qgc
Total gate charge
Gate-emitter charge
Gate-collector charge
VCE = 390V, IC = 5A,
VGE = 15V,
(see Figure 16)
19.2
4.5
7
nC
nC
nC
STGP10NC60H Electrical characteristics
5/13
Table 5. Switching on/off (inductive load)
Symbol Parameter Test conditions Min. Typ. Max. Unit
td(on)
tr
(di/dt)on
Turn-on delay time
Current rise time
Turn-on current slope
VCC = 390V, IC = 5A
RG= 10Ω, VGE= 15V,
Figure 15. and Figure 17.
14.2
5
1000
ns
ns
A/µs
td(on)
tr
(di/dt)on
Turn-on delay time
Current rise time
Turn-on current slope
VCC = 390V, IC = 5A
RG= 10Ω, VGE= 15V,
Tj=125°C
Figure 15. and Figure 17.
14
5
920
ns
ns
A/µs
tr(Voff)
td(off)
tf
Off voltage rise time
Turn-off delay time
Current fall time
Vcc = 390V, IC = 5A,
RGE = 10Ω, VGE = 15V,
Figure 15. and Figure 17.
27
72
85
ns
ns
ns
tr(Voff)
td(off)
tf
Off voltage rise time
Turn-off delay time
Current fall time
Vcc = 390V, IC = 5A,
RGE=10Ω, VGE =15V,
Tj=125°C
Figure 15. and Figure 17.
50
108
139
ns
ns
ns
Table 6. Switching energy (inductive load)
Symbol Parameter Test conditions Min. Typ. Max. Unit
Eon
Eoff(1)
Ets
1. Turn-off losses include also the tail of the collector current
Turn-on switching losses
Turn-off switching losses
Total switching losses
VCC = 390V, IC = 5A
RG=10Ω, VGE=15V,
Tj=25°C
(see Figure 17)
31.8
95
126.8
µJ
µJ
µJ
Eon
Eoff(1)
Ets
Turn-on switching losses
Turn-off switching Losses
Total switching losses
VCC = 390V, IC = 5A
RG=10Ω, VGE= 15V,
Tj= 125°C
(see Figure 17)
61.8
173
234.8
µJ
µJ
µJ
Electrical characteristics STGP10NC60H
6/13
2.1 Electrical characteristics (curves)
Figure 1. Output characteristics Figure 2. Transfer characteristics
Figure 3. Transconductance Figure 4. Collector-emitter on voltage vs
temperature
Figure 5. Gate charge vs gate-source voltage Figure 6. Capacitance variations
STGP10NC60H Electrical characteristics
7/13
Figure 7. Normalized gate threshold voltage
vs temperature
Figure 8. Collector-emitter on voltage vs
collector current
Figure 9. Normalized breakdown voltage vs
temperature
Figure 10. Switching losses vs temperature
Figure 11. Switching losses vs gate resistance Figure 12. Switching losses vs collector
current
Electrical characteristics STGP10NC60H
8/13
Figure 13. Thermal Impedance Figure 14. Turn-off SOA
STGP10NC60H Test circuits
9/13
3 Test circuits
Figure 15. Test circuit for inductive load
switching
Figure 16. Gate charge test circuit
Figure 17. Switching waveform
Package mechanical data STGP10NC60H
10/13
4 Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK®
packages. These packages have a Lead-free second level interconnect. The category of
second level interconnect is marked on the package and on the inner box label, in
compliance with JEDEC Standard JESD97. The maximum ratings related to soldering
conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at: www.st.com
STGP10NC60H Package mechanical data
11/13
DIM. mm. inch
MIN. TYP MAX. MIN. TYP. MAX.
A 4.40 4.60 0.173 0.181
b 0.61 0.88 0.024 0.034
b1 1.15 1.70 0.045 0.066
c 0.49 0.70 0.019 0.027
D 15.25 15.75 0.60 0.620
E 10 10.40 0.393 0.409
e 2.40 2.70 0.094 0.106
e1 4.95 5.15 0.194 0.202
F 1.23 1.32 0.048 0.052
H1 6.20 6.60 0.244 0.256
J1 2.40 2.72 0.094 0.107
L 13 14 0.511 0.551
L1 3.50 3.93 0.137 0.154
L20 16.40 0.645
L30 28.90 1.137
øP 3.75 3.85 0.147 0.151
Q 2.65 2.95 0.104 0.116
TO-220 MECHANICAL DATA
STGP10NC60H
13/13
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2007 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
