BI5-Q08-AD4X-V2130 - Turck - Datasheet.Directory

Hans Turck GmbH & Co.KG • Postfach • D-45466 Mülheim an der Ruhr • Telefon 02 08/49 52-0 • Telefax 02 08/49 52-264

Subject to change without notice • © Hans Turck GmbH & Co.KG 2002 • Edition: • 15.04.2004

Subject to change without notice • © Hans Turck GmbH & Co.KG 2002 • Edition:

Hans Turck GmbH & Co.KG • Postfach • D-45466 Mülheim an der Ruhr • Telefon 02 08/49 52-0 • Telefax 02 08/49 52-264

Inductive sensor

Bi5-Q08-AD4X-V2130

●rectangular, height 8 mm

●top active face

●metal, GD-Zn

●2-wire DC, 10...65 VDC

●normally open

●connector M8 x 1

Wiring diagram

Function principles

Inductive proximity switches are designed

for wear-free non-contact detection of me-

tal objects. For this they use a high-fre-

quency electro-magnetic AC field that

interacts with the target. With inductive

sensors, this field is generated by an LC re-

sonant circuit with a ferrite core coil.

+ ()

 (+)

1 BN

3 BU

Type Bi5-Q08-AD4X-V2130

Ident-No. 4414553

Rated operating distance Sn 5 mm

Mounting mode flush

Hysteresis (switching distance) 1... 15 %

Min. repeat accuracy ≤ 2 %

Temperature drift ≤ ± 10 %

Operating temperature -25 ...+ 70 °C

Rated operational voltage (DC) UB10... 65 VDC

Max. ripple ≤ 10 % Upp

Rated operational current (DC) Ie≤ 100 mA

Max. OFF-state current ≤ 0,6 mA

Max. switching frequency ≤ 1 kHz

Rated insulation voltage ≤ 0,5 kV

Short-circuit protection yes, cyclic

Max. voltage drop at Ie≤ 5 V

Min. operational current Im≥ 3 mA

Housing style rectangular; Q08

Dimensions 32 x 20 x 8 mm

Housing material metal, GD-Zn

Active face plastic, PA12-GF30

Wiring connector, M8 x 1

Vibration resistance 55 Hz (1 mm)

Shock resistance 30 x g (11 ms)

Degree of protection IP67

Switching status indication LED yellow

ø 3,4

LED

M8 x 1

Hans Turck GmbH & Co.KG • Postfach • D-45466 Mülheim an der Ruhr • Telefon 02 08/49 52-0 • Telefax 02 08/49 52-264

Inductive sensor

Bi5-Q08-AD4X-V2130

Mounting instructions minimum gap

Gap D 2 x B

Gap W 3 x Sn

Gap S 1 x B

Gap G 6 x Sn

Width of active face B 20 mm