Agilent HSMF-C165, C166, C167 Miniature Bi-Color Surface Mount Chip LEDs Data Sheet Description The HSMF-C16x series of bicolor chip-type LEDs is designed in an ultra small package for miniaturization. It is the first of its kind to achieve such small packaging for 2 dies. The small size, narrow footprint, and low profile make this series of LEDs excellent for backlighting, status indication, and front panel illumination applications. Features * Small 1.6 x 0.8 mm footprint * Diffused optics * Operating temperature range of -30C to +85C * Compatible with reflow soldering * Three color combinations available: red/green, yellow/ green, orange/green * Available in 8 mm tape on 7" (178 mm) diameter reels Applications * Keypad backlighting * Symbol backlighting * LCD backlighting * Status indication * Front panel indicator Device Selection Guide Part Number Color Parts per Reel HSMF-C165 High Efficiency Red/Green 4000 HSMF-C166 Yellow/Green 4000 HSMF-C167 Orange/Green 4000 Package Dimensions CATHODE LINE LED DIES 1 3 0.8 (0.031) 2 4 1.6 (0.063) GREEN 3 1 RED/YELLOW/ORANGE 2 4 DIFFUSED EPOXY POLARITY 0.5 (0.020) PC BOARD 0.16 (0.006) CATHODE LINE 0.4 (0.016) 0.4 (0.016) 0.3 (0.012) SOLDERING TERMINALS NOTES: 1. ALL DIMENSIONS IN MILLIMETERS (INCHES). 2. TOLERANCE IS 0.1 mm ( 0.004 IN.) UNLESS OTHERWISE SPECIFIED. 2 Absolute Maximum Ratings at TA = 25C Parameter HSMF-C165/166/167 Units DC Forward Current [1] 20 mA Peak Pulsing Current[2] 100 mA Power Dissipation 52 mW Reverse Voltage (IR = 100 A) 5 V LED Junction Temperature 95 C Operating Temperature Range -30 to +85 C Storage Temperature Range -40 to +85 C Soldering Temperature See reflow soldering profile (Figure 6) Notes: 1. Derate linearly as shown in Figure 4. 2. Pulse condition of 1/10 duty and 0.1 ms width. Electrical Characteristics at TA = 25C Color Forward Voltage VF (Volts) @ IF = 20 mA Typ. Max. Reverse Breakdown VR (Volts) @ IR = 100 A Min. Capacitance C (pF), @ VF = 0, f = 1 MHz Typ. Thermal Resistance RJ-PIN (C/W) Typ. HER 2.1 2.6 5 5 325 Orange 2.2 2.6 5 7 325 Yellow 2.1 2.6 5 6 325 Green 2.2 2.6 5 9 325 Optical Characteristics at TA = 25C Color Luminous Intensity IV (mcd) @ 20 mA[1] Min. Typ. Peak Wavelength peak (nm) Typ. Color, Dominant Wavelength d[2] (nm) Typ. Viewing Angle 2 1/2 Degrees [3] Typ. HER 2.5 10.0 630 626 120 Orange 2.5 8.0 605 604 120 Yellow 2.5 8.0 589 586 120 Green 4.0 15.0 570 572 120 Notes: 1. The luminous intensity, I V, is measured at the peak of the spatial radiation pattern which may not be aligned with the mechanical axis of the lamp package. 2. The dominant wavelength, d , is derived from the CIE Chromaticity Diagram and represents the perceived color of the device. 3. 1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity. 3 Color Bin Limits Green Color Bins[1] Bin ID A B C D E Dom. Wavelength (nm) Min. Max. 561 565 564 568 567 571 570 574 573 577 Orange Color Bins [1] Bin ID A B C D E F Dom. Wavelength (nm) Min. Max. 596.0 601.0 599.0 604.0 602.0 607.0 605.0 610.0 608.0 613.0 611.0 616.0 Yellow/Amber Color Bins[1] Dom. Wavelength (nm) Bin ID Min. Max. A 581.5 585.0 B 584.0 587.5 C 586.5 590.0 D 589.5 592.5 E 591.5 595.0 F 594.0 597.5 Light Intensity (Iv) Bin Limits[1] Intensity (mcd) Bin ID Min. Max. A 0.10 0.20 B 0.16 0.32 C 0.25 0.50 D 0.40 0.80 E 0.63 1.25 F 1.00 2.00 G 1.60 3.20 H 2.50 5.00 J 4.00 8.00 Bin ID K L M N P Q R S T Intensity (mcd) Min. Max. 6.30 12.50 10.00 20.00 16.00 32.00 25.00 50.00 40.00 80.00 63.00 125.00 100.00 200.00 160.00 320.00 250.00 500.00 Note: 1. Bin categories are established for classification of products. Products may not be available in all categories. Please contact your Agilent representative for information on currently available bins. 4 1.0 IF - FORWARD CURRENT - mA 100 RELATIVE INTENSITY GREEN YELLOW 0.5 ORANGE 0 500 HER 550 600 650 700 IF MAX - MAXIMUM FORWARD CURRENT - mA LUMINOUS INTENSITY (NORMALIZED AT 20 mA) 1.2 1.0 0.8 0.6 0.4 0.2 10 15 20 25 30 IF - FORWARD CURRENT - mA Figure 3. Luminous intensity vs. forward current. 25 20 R J-A= 600C/W 15 R J-A= 800C/W 10 5 0 0 20 40 60 100 RELATIVE INTENSITY - % 90 80 70 60 50 40 30 20 10 0 10 20 30 40 50 60 70 80 90 ANGLE Figure 5. Relative intensity vs. angle. 5 80 100 TA - AMBIENT TEMPERATURE - C Figure 4. Maximum forward current vs. ambient temperature. 0 -90 -80 -70 -60 -50 -40 -30 -20 -10 1 GREEN 2 2.1 2.2 2.3 Figure 2. Forward current vs. forward voltage. 1.4 5 YELLOW VF - FORWARD VOLTAGE - V Figure 1. Relative intensity vs. wavelength. 0 ORANGE 0 1.5 1.6 1.7 1.8 1.9 750 WAVELENGTH - nm 0 HER 10 0.60 (0.024) TEMPERATURE 10 SEC. MAX. 0.40 (0.016) 230C MAX. 0.30 (0.012) 4C/SEC. MAX. 140-160C 0.40 (0.016) -3C/SEC. MAX. 4C/SEC. MAX. OVER 2 MIN. 0.70 (0.028) TIME Figure 6. Recommended reflow soldering profile. 0.70 (0.028) Figure 7. Recommended soldering pad pattern. USER FEED DIRECTION CATHODE SIDE PRINTED LABEL Figure 8. Reeling orientation. 8.0 1.0 (0.315 0.039) 10.50 1.0 (0.413 0.039) O 20.20 MIN. (O 0.795 MIN.) O 13.1 0.5 (O 0.516 0.020) 3.0 0.5 (0.118 0.020) 59.60 1.00 (2.346 0.039) 178.40 1.00 (7.024 0.039) 4.0 0.5 (0.157 0.020) 6 PS Figure 9. Reel dimensions. NOTE: 1. ALL DIMENSIONS IN MILLIMETERS (INCHES). 6 5.0 0.5 (0.197 0.020) 4.00 (0.157) DIM. C (SEE TABLE 1) CATHODE 1.50 (0.059) 0.20 0.05 (0.008 0.002) 1.75 (0.069) 3.50 0.05 (0.138 0.002) DIM. A (SEE TABLE 1) 8.00 0.30 (0.315 0.012) DIM. B (SEE TABLE 1) 2.00 0.05 (0.079 0.002) CARRIER TAPE USER FEED DIRECTION COVER TAPE 4.00 (0.157) TABLE 1 DIMENSIONS IN MILLIMETERS (INCHES) PART NUMBER HSMF-C16x SERIES DIM. A DIM. B DIM. C 0.10 ( 0.004) 0.10 ( 0.004) 0.10 ( 0.004) 1.80 (0.071) 0.95 (0.037) 0.60 (0.024) Figure 10. Tape dimensions. END THERE SHALL BE A MINIMUM OF 160 mm (6.3 INCH) OF EMPTY COMPONENT POCKETS SEALED WITH COVER TAPE. START MOUNTED WITH COMPONENTS THERE SHALL BE A MINIMUM OF 160 mm (6.3 INCH) OF EMPTY COMPONENT POCKETS SEALED WITH COVER TAPE. Figure 11. Tape leader and trailer dimensions. NOTES: 1. ALL DIMENSIONS IN MILLIMETERS (INCHES). 2. TOLERANCE IS 0.1 mm ( 0.004 IN.) UNLESS OTHERWISE SPECIFIED. 7 MINIMUM OF 230 mm (9.05 INCH) MAY CONSIST OF CARRIER AND/OR COVER TAPE. Reflow Soldering For more information on reflow soldering, refer to Application Note 1060, Surface Mounting SMT LED Indicator Components. Storage Condition: 5 to 30C @ 60% RH max. Baking is required under the condition: a) the blue silica gel indicator becoming white/transparent color b) the pack has been open for more than 1 week Baking recommended condition: 60 5C for 20 hours. www.agilent.com/semiconductors For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (408) 654-8675 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (+65) 6271 2451 India, Australia, New Zealand: (+65) 6271 2394 Japan: (+81 3) 3335-8152(Domestic/International), or 0120-61-1280(Domestic Only) Korea: (+65) 6271 2194 Malaysia, Singapore: (+65) 6271 2054 Taiwan: (+65) 6271 2654 Data subject to change. Copyright (c) 2002 Agilent Technologies, Inc. Obsoletes 5988-4258EN April 6, 2002 5988-6146EN