EC11 Power entry modules without line filter https://www.schurter.com /PG05 IEC Appliance Inlet C20 with Line Switch, 2-pole Screw-on mounting from front side non-illuminated, black Snap-in mounting from front side illuminated version green C20 See below: Approvals and Compliances 70 C Description -Panel mount : Screw-on version from front or rear side, snap-in version from front side -2 Functions : Appliance Inlet Protection class I ,Line Switch 2-pole -Quick connect terminals 6.3 x 0.8 mm Characteristics -All single elements are already wired -Unwired versions available on request -Line switch non-illuminated or illuminated -Ideal for application with high transient loads -Suitable for use in equipment according to IEC/UL 62368-1 Other versions on request -Unwired versions -Line switch with other rocker marking -For protection class II -Variant with notch for V-Lock mating Cordsets References Alternative: version with line filter EC12 Weblinks pdf data sheet, html datasheet, General Product Information, Approvals, Distributor-Stock-Check, Accessories, Detailed request for product Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Technical Data Ratings IEC Ratings UL/CSA Dielectric Strength Allowable Operation Temperature IP-Protection Protection against electric shock Terminal Panel Thickness S Material: Housing 16A / 250VAC; 50Hz 20A / 250VAC; 60Hz > 2.5kVAC between L-N > 3kVAC between L/N-PE (1min/50Hz) -25C to 70C Appliance inlet/-outlet Line Switch C20 acc. to IEC 60320-1, UL 60320-1, CSA C22.2 no. 60320-1 (for cold conditions) pin-temperature 70 C, 16A, Protection Class I Rocker switch 2-pole, non-illuminated or illuminated, acc. to IEC 61058-1 Technical Details from front side IP40 acc. to IEC 60529 Suitable for appliances with protection class I acc. to IEC 61140 Quick connect terminals 6.3 x 0.8 mm Screw: max 8mm Mounting screw torque max 0.5Nm Snap-in: 1.5/2/2.5 mm Thermoplastic, black, UL 94V-0 Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER. Connectors 1 EC11 Power entry modules without line filter https://www.schurter.com /PG05 Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: EC11 Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40001031 UL Approvals UL UL File Number: E96454 CCC Approvals CCC CCC Certificate Number: 2014010204683955 Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 60320-1 Standard for Attachment Plugs and Receptacles Designed according to CSA C22.2 no. 60320-1 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Design Standard Description Designed for applications acc. IEC/UL 62368-1 IEC 62368-1 includes the basic requirements for safety of audio, video, information technology and office equipment. Designed for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets the requirements for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 & -13. Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG Directive RoHS 2011/65/EU, Amendment (EU) 2015/863 China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. SCHURTER AG V-Lock system are based on a matching plug-dose combination. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. SCHURTER AG Meets the requirements of IEC 60335-1 for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 &-13. Product standards Product standards that are referenced Organization Application standards Application standards where the product can be used Organization Compliances The product complies with following Guide Lines Identification White Paper Glow wire test 2 Connectors EC11 Power entry modules without line filter https://www.schurter.com /PG05 Dimensions [mm] Screw-on mounting 36 2.3 ca. 52 32.2 31.7 3.6 31.6 R 46.50.10 57 0.10 45.7 46.2 57 67 R 2. 95 0 .0 5 6 2. 0.8 10.4 4. 7 5 R6 R S 3.3 6.4 32.5 0.10 26.6 5.25 0.05 8 R 2. 4.8 Snap-in mounting 36 2.3 ca. 52 32.2 31.7 31.6 R +0.05 46.5 -0.10 45.7 2.15 4. R 2.8 1.9 7 50 46.2 R 2. 95 0 .0 5 6 2. R S 0.05 32.5 26.6 +0.05 -0.10 4.8 Diagrams Line switch non-illuminated 1) L Line switch illuminated 1 PE 2) PE' N 2 1) Line 2) Load 1) L 1 PE 2) PE' N 2 1) Line 2) Load All Variants Panel mounting Panel Thickness s [mm] Snap-in Snap-in Illumination Color Internally wired 1.5 - l 1.5 - l Snap-in 1.5 - Snap-in 1.5 l red l Snap-in 1.5 l red l Snap-in 1.5 l red V-Lock Order Number EC11.0001.201 l EC11.0001.201.21 EC11.0001.202 EC11.0021.201 l EC11.0021.201.21 EC11.0021.202 Connectors 3 EC11 Power entry modules without line filter https://www.schurter.com /PG05 Panel mounting Panel Thickness s [mm] Illumination Color Internally wired Snap-in 1.5 l green l Snap-in 1.5 l green l Snap-in 1.5 l green Snap-in 2 Order Number EC11.0031.201 l l l Snap-in 2 - Snap-in 2 - Snap-in 2 l red l Snap-in 2 l red l Snap-in 2 l red Snap-in 2 l green l Snap-in 2 l green l Snap-in 2 l green Snap-in 2.5 Snap-in 2.5 Snap-in 2.5 l red Snap-in 2.5 l red Snap-in 2.5 l green Snap-in 2.5 l green Screw - - l Screw - - l Screw - - Screw - l red l Screw - l red l Screw - l red Screw - l green l Screw - l green l Screw - l green EC11.0001.301 l EC11.0001.302 EC11.0021.301 l EC11.0021.301.21 EC11.0021.302 EC11.0031.301 l EC11.0031.301.21 EC11.0031.302 EC11.0001.401 l - EC11.0001.402 EC11.0021.401 l EC11.0021.402 EC11.0031.401 l EC11.0031.402 l EC11.0001.001 EC11.0001.001.21 EC11.0001.002 EC11.0021.001 l 4 Connectors EC11.0021.001.21 EC11.0021.002 EC11.0031.001 l EC11.0031.001.21 EC11.0031.002 Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER 25Pcs EC11.0001.301.21 Most Popular. Packaging unit EC11.0031.201.21 EC11.0031.202 - - V-Lock EC11 Power entry modules without line filter https://www.schurter.com /PG05 Accessories Description Wire Harness Wire harness for SCHURTER products Assorted Covers Rear Cover 0859.0076 RC320 Rear Cover for Power Entry Module Cord retaining kits Cord retaining strain relief Flat head, H 4700.0008 Mating Outlets/Connectors Category / Description Connector Overview complete 4795, Mounting: Power Cord, Cable Connector: IEC C19 4795 4790, Mounting: Power Cord, Screw Connector: IEC C19 4790 0104U, Mounting: Power Supply Cord, Screw clamps Connector: IEC C19 0104U Connector further types to EC11 Power Supply Cord Overview complete Cord Sets 10 A, North America, 3.0 m, Connector IEC C13, SJT 3x18 AWG, Transparent 4300.0920 Cord Sets 16 A, Europlug, 2.5 m, Connector IEC C19, H05VV-F3G1.5, black 6004.0395 Cord Sets 16 A, Interconnection, 1.0 m, Connector IEC C19, H05VV-F3G1.5, black 6020.0392 Cord Sets 16 A, Interconnection, 2.0 m, Connector IEC C19, H05VV-F3G1.5, black 6020.0394 Cord Sets 16 A, North America, 2.5 m, Connector IEC C19, SJT 3x14 AWG, black 6009.5195 Power Supply Cord further types to EC11 Connectors 5 EC11 Power entry modules without line filter https://www.schurter.com /PG05 Mating Outlets/Connectors shuttered Power Cord Overview complete VAC19KS, Overview, V-Lock cord retaining, diverse Connector IEC C19, diverse, black VAC19KS Power Cord further types to EC11 15.10.2020 6 Connectors The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications.