OM7650,112 - NXP Semiconductors - Datasheet.Directory

1. Product profile

1.1 General description

Hybrid high dynamic range a mplifier module in SOT115BA package op erati ng at a supply

voltage of 24 V (DC).

1.2 Features and benefits

Excellent linearity

Extremely low noise

High gain

Silicon nitride passivation

Rugged construction

TiPtAu metallized crystals ensure excellent reliability

Surface mount transformers

1.3 Applications

Single module line extender in CATV systems operating in the 40 MHz to 550 MHz

frequency range.

1.4 Quick reference data

[1] The module normally operates at VB = 24 V, but is able to withstand supply transients up to 30 V.

OM7650

550 MHz, 34 dB gain push-pull amplifier

Rev. 2 — 29 September 2010 Product data sheet

CAUTION

This device is sensitive to ElectroStatic Discharge (ESD). Therefore care should be taken

during transport and handling.

Table 1. Quick reference data

Symbol Parameter Conditions Min Typ Max Unit

Gppower gain f = 50 MHz 33.0 - 35.0 dB

f = 550 MHz 33.2 - - dB

Itot total current VB=24V [1] 300- 340mA

Product data sheet Rev. 2 — 29 September 2010 2 of 8

NXP Semiconductors OM7650

550 MHz, 34 dB gain push-pull amplifier

2. Pinning information

3. Ordering information

4. Marking

5. Limiting values

Table 2. Pinning

Pin Description Simplified outline Symbol

1 input

2 common

3 common

5+V

7 common

8 common

9output

91537

2378

sym09

Table 3. Ordering i nformation

Type number Package

Name Description Version

OM7650 - rectangular single-ended package; aluminium flange;

2 vertical mounting holes; 2 × 6-32 UNC; 7 Sn-plated

in-line leads

SOT115BA

Table 4. Marking

Type number Marking

OM7650 INDI 50

Table 5. Limiting values

In accordance with the Absolute Maximum Rating System (IEC 60134).

Symbol Parameter Conditions Min Max Unit

Viinput voltage - 55 dBmV

Tstg storage temperature −40 +100 °C

Tmb mounting base temperature −20 +100 °C

Product data sheet Rev. 2 — 29 September 2010 3 of 8

NXP Semiconductors OM7650

550 MHz, 34 dB gain push-pull amplifier

6. Characteristics

[1] The module normally operates at VB = 24 V, but is able to withstand supply transients up to 30 V.

Table 6. Characteristics

Bandwidth 40 MHz to 550 MHz; VB=24V; T

case =35

C; ZS=Z

L=75

unless otherwise specified.

Symbol Parameter Conditions Min Typ Max Unit

Gppower gain f = 50 MHz 33.0 - 35.0 dB

f = 550 MHz 33.2 - - dB

SL slope cable equivalent f = 40 MHz to 550 MHz 0.2 - 2.0 dB

FL flatness of frequency response f = 40 MHz to 550 MH z - - ±0.5 dB

S11 input return losses f = 40 MHz to 160 MHz 15 - - dB

f = 160 MHz to 550 MHz 10 - - dB

S22 output return losses f = 40 MHz to 160 MH z 15 - - dB

f = 160 MHz to 550 MHz 10 - - dB

CTB composite triple beat 77 channels flat;

Vo=44dBmV;

measured at 547.25 MHz

--−45 dB

CSO composite second-order

distortion 77 channels flat;

Vo=44dBmV;

measured at 548.5 MHz

--−57 dB

NF noise figure f = 50 MHz - - 8 dB

Itot total current VB = 24 V [1] 300 - 340 mA

Product data sheet Rev. 2 — 29 September 2010 4 of 8

NXP Semiconductors OM7650

550 MHz, 34 dB gain push-pull amplifier

7. Package outline

Fig 1. Package outline SOT115BA

REFERENCES

OUTLINE

VERSION EUROPEAN

PROJECTION ISSUE DATE

IEC JEDEC JEITA

DIMENSIONS (mm are the original dimensions)

SOT115BA

0 5 10 mm

scale

Rectangular single-ended package; aluminium flange; 2 vertical mounting holes;

2 x 6-32 UNC; 7 Sn-plated in-line leads SOT115BA

U1q

78923

05-11-11

10-06-18

UNIT A2

max. cee

max. q1U2

U1W

mm 20.8 9.5 0.51

0.38 0.25 27.2 2.54 13.75 2.54 5.08 12.7 8.8 4.15

3.85 2.4 38.1 25.4 4.2 44.75

44.25

8.2

7.8 0.25 0.1 3.8

6-32

UNC

0.7

max. D

max. L

min.

max. Z

max.

Product data sheet Rev. 2 — 29 September 2010 5 of 8

NXP Semiconductors OM7650

550 MHz, 34 dB gain push-pull amplifier

8. Revision history

Table 7. Revision history

Document ID Release date Data sheet status Change notice Supersedes

OM7650 v.2 20100929 Product data sheet - OM7650 v.1

Modifications: •The format of this data sheet has been redesigned to comply with the new identity guidelines

of NXP Semiconductors.

•Legal texts have been adapted to the new company name where appropriate.

•Package outline drawings have been updated to the latest version.

OM7650 v.1 20060531 Product data sheet - -

Product data sheet Rev. 2 — 29 September 2010 6 of 8

NXP Semiconductors OM7650

550 MHz, 34 dB gain push-pull amplifier

9. Legal information

9.1 Data sheet status

[1] Please consult the most recently issued document before initiating or completing a design.

[2] The term ‘short data sheet’ is explained in section “Definitions”.

[3] The product status of de vice(s) descr ibed in th is document m ay have cha nged since thi s document w as publish ed and may di ffe r in case of multiple devices. The latest product status

information is available on the Internet at URL http://www.nxp.com.

9.2 Definitions

Draft — The document is a draft version only. The content is still under

internal review and subject to formal approval, which may result in

modifications or additions. NXP Semiconductors does not give any

representations or warranties as to the accuracy or completeness of

information included herein and shall have no liab ility for the consequences of

use of such information.

Short data sheet — A short data sheet is an extract from a full dat a sheet

with the same product type number(s) and tit le. A short data sh eet is intended

for quick reference only and shou ld not b e relied u pon to cont ain det ailed and

full information. For detailed and full information se e the relevant full data

sheet, which is available on request via the local NXP Semicond uctors sales

office. In case of any inconsistency or conflict with the shor t data sheet, the

full data sheet shall pre va il.

Product specificat ion — The information and data provided in a Product

data sheet shall define the specification of the product as agreed between

NXP Semiconductors and its customer, unless NXP Semiconductors and

customer have explicitly agreed otherwise in writing. In no event however,

shall an agreement be valid in which the NXP Semiconductors product is

deemed to off er functions and qualities beyond those described in the

Product data sheet.

9.3 Disclaimers

Limited warr a nty and liability — Information in this document is believed to

be accurate and reliable. However, NXP Semiconductors does not give any

representations or warrant ies, expressed or implied, as to the accuracy or

completeness of such information and shall have no liability for the

consequences of use of such information.

In no event shall NXP Semiconductors be liable for any indirect, incid ental,

punitive, special or consequ ential damages (including - wit hout limitation - lost

profits, lost savings, business interruption, costs related to the removal or

replacement of any products or rework charges) whether or not such

damages are based on tort (including negligence), warranty, breach of

contract or any other legal theory.

Notwithstanding any damages that customer might incur for any reason

whatsoever, NXP Semiconductors’ aggreg ate and cumulative li ability towards

customer for the products described herein shall be limited in accordance

with the Terms and conditions of commercial sale of NXP Semiconductors.

Right to make changes — NXP Semiconductors reserves the right to make

changes to information published in this document, including without

limitation specifications and product descriptions, at any time and without

notice. This document supersedes and replaces all informa tion supplied prior

to the publication hereof .

Suitability for use — NXP Semiconductors products are not designed,

authorized or warranted to be suit able for use in life support, life-critical or

safety-critical systems or equipment, nor in applications where failure or

malfunction of an NXP Semiconductors product can reasonably be expected

to result in perso nal injury, death or severe property or environmental

damage. NXP Semiconductors accepts no liab ility for inclusion and/or use of

NXP Semiconductors products in such equipment or applications and

therefore such inclusion and/or use is at the customer’s own risk.

Applications — Applications that are described herein for any of these

products are for illustrative purposes only. NXP Semiconductors makes no

representation or warranty that such applications will be suitable for the

specified use without further testing or modification.

Customers are responsible for the design and ope ration of their applications

and products using NXP Semiconductors product s, and NXP Semiconductors

accepts no liability for any assistance with applications or customer product

design. It is customer’s sole responsibility to determine whether the NXP

Semiconductors product is suit able and fit for the custome r’s applications and

products planned, as well as fo r the planned application and use of

customer’s third party customer(s). Custo mers should provide appropriate

design and operating safeguards to minimize the risks associated with their

applications and products.

NXP Semiconductors does not accept any liability rela ted to any default,

damage, costs or problem which is based on any weakness or default in the

customer’s applications or products, or the application or use by customer’s

third party custo m er(s). Customer is responsible for doing all necessary

testing for the customer’s applications and products using NXP

Semiconductors products in order to avoid a default of the applications and

the products or of the application or use by customer’s third party

customer(s). NXP does not accept any liability in this respect.

Limiting values — Stress above one or more limiting values (as defined in

the Absolute Maximum Ratings System of IEC 60134) will cause permanent

damage to the device. Limiting values are stress ratings onl y and (proper)

operation of the device at these or any other conditions above those given in

the Recommended operating conditions section (if present) or the

Characteristics sections of this document is not warranted. Constant or

repeated exposure to limiting values will permanently and irreversibly affect

the quality and reliability of the device.

Terms and conditions of commercial sale — NXP Semiconductors

products are sold subject to the general terms and conditions of commercial

sale, as published at http://www.nxp.com/profile/terms, unless otherwise

agreed in a valid written individua l agreement. In case an individual

agreement is concluded only the ter m s and conditions of the respective

agreement shall apply. NXP Semiconductors hereby expressly objects to

applying the customer’s general terms and conditions with regard to the

purchase of NXP Semiconductors products by customer.

No offer to sell or license — Nothing i n this document may be interpreted or

construed as an of fer t o sell product s that is open for accept ance or the gr ant,

conveyance or implication of any license under any copyrights, patents or

other industrial or inte llectual property rights.

Export control — This document as well as the item(s) described herein

may be subject to export control regulatio ns. Export might require a prior

authorization from national authorities.

Document status[1][2] Product status[3] Definition

Objective [short] data sheet D evelopment This document contains data fro m the objective specification for product development.

Preliminary [short] dat a sheet Qualification This document contains data from the preliminary specification.

Product [short] data sheet Production This document contains the product specification.

Product data sheet Rev. 2 — 29 September 2010 7 of 8

NXP Semiconductors OM7650

550 MHz, 34 dB gain push-pull amplifier

Quick reference data — The Quick reference data is an extract of the

product data given in the Limiting values and Characteristi cs sections of this

document, and as such is not complete, exhaustive or legally binding.

Non-automotive qualified products — Unless this data sheet expressly

states that this specific NXP Semiconductors product is automotive qualified,

the product is not suitable for automo tive use. It i s neit her qualif ied nor test ed

in accordance with automotive testing or application requirements. NXP

Semiconductors accepts no liability for inclusion and/or use of

non-automotive qualified products in automotive equipment or applications.

In the event that customer uses the product for design-in and use in

automotive applications to automot ive specifications and standards, custome r

(a) shall use the product without NXP Semiconductors’ warranty of the

product for such automotive applications, use and specifications, and (b)

whenever customer uses the product for automotive applications beyond

NXP Semiconductors’ specifications such use shall be solely at customer’s

own risk, and (c) customer fully indemnifies NXP Semiconduct ors for an y

liability, damages or failed product cl aims resulting f rom customer design and

use of the product for automotive applications beyond NXP Semiconductors’

standard warranty and NXP Semiconductors’ product specifications.

9.4 Trademarks

Notice: All referenced b rands, produc t names, service names and trademarks

are the property of their respective ow ners.

10. Contact information

For more information, please visit: http://www.nxp.com

For sales office addresses, please send an email to: salesaddresses@nxp.com

NXP Semiconductors OM7650

550 MHz, 34 dB gain push-pull amplifier

For more information, please visit: http://www.nxp.com

For sales office addresses, please send an email to: salesaddresses@nxp.com

Date of release: 29 September 2010

Document identifier: OM 7650

Please be aware that important notices concerning this document and the product(s)

described herein, have been included in section ‘Legal information’.

11. Contents

1 Product profile. . . . . . . . . . . . . . . . . . . . . . . . . . 1

1.1 General description . . . . . . . . . . . . . . . . . . . . . 1

1.2 Features and benefits. . . . . . . . . . . . . . . . . . . . 1

1.3 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

1.4 Quick reference data . . . . . . . . . . . . . . . . . . . . 1

2 Pinning information. . . . . . . . . . . . . . . . . . . . . . 2

3 Ordering information. . . . . . . . . . . . . . . . . . . . . 2

4 Marking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

5 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2

6 Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . 3

7 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 4

8 Revision history. . . . . . . . . . . . . . . . . . . . . . . . . 5

9 Legal information. . . . . . . . . . . . . . . . . . . . . . . . 6

9.1 Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 6

9.2 Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

9.3 Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

9.4 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

10 Contact information. . . . . . . . . . . . . . . . . . . . . . 7

11 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8