GS72116ATP/T/U TSOP, FP-BGA, TQFP Commercial Temp Industrial Temp 7, 8, 10, 12 ns 3.3 V VDD Center VDD and VSS 128K x 16 2Mb Asynchronous SRAM Features * Fast access time: 7, 8, 10, 12 ns * CMOS low power operation: 145/125/100/85 mA at minimum cycle time * Single 3.3 V power supply * All inputs and outputs are TTL-compatible * Byte control * Fully static operation * Industrial Temperature Option: -40 to 85C * Package line up TP: 400 mil, 44-pin TSOP Type II package GP: RoHS-compliant 400 mil, 44-pin TSOP Type II package T: 10 mm x 10 mm, 44-pin TQFP GT: RoHS-compliant 10 mm x 10 mm, 44-pin TQFP U: 6 mm x 8 mm Fine Pitch Ball Grid Array package GU: RoHS-compliant 6 mm x 8 mm Fine Pitch Ball Grid Array package Pin Descriptions Description The GS72116A is a high speed CMOS Static RAM organized as 131,072 words by 16 bits. Static design eliminates the need for external clocks or timing strobes. The GS operates on a single 3.3 V power supply and all inputs and outputs are TTLcompatible. The GS72116A is available in a 6 mm x 8 mm Fine Pitch BGA package, a 10 mm x 10 mm TQFP package, and 400 mil TSOP Type-II packages. Symbol Description A0-A16 Address input DQ1-DQ16 Data input/output CE Chip enable input LB Lower byte enable input (DQ1 to DQ8) UB Upper byte enable input (DQ9 to DQ16) WE Write enable input OE Output enable input VDD +3.3 V power supply VSS Ground NC No connect 44-Pin TQFP 128K x 16-Pin Configuration A16 A15 A14 A13 A12 A11 A10 A9 OE UB LB CE 1 DQ1 44 43 42 41 40 39 38 37 36 35 34 33 DQ16 2 32 DQ15 DQ2 3 31 DQ14 DQ3 4 30 DQ13 DQ4 5 29 VSS VDD 6 28 VDD VSS 7 27 DQ12 DQ5 8 26 DQ11 DQ6 9 25 DQ10 DQ7 10 24 DQ9 11 12 13 14 15 16 17 18 19 20 21 22 23 NC DQ8 WE A0 A1 A2 A3 A4 NC A5 A6 A7 A8 Package T Rev: 1.09a 4/2009 1/16 Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com. (c) 2001, GSI Technology GS72116ATP/T/U Fine Pitch BGA 128K x 16-Bump Configuration 1 2 3 4 5 6 A LB OE A0 A1 A2 NC B DQ16 UB A3 A4 CE DQ1 C DQ14 DQ15 A5 A6 DQ2 DQ3 D VSS DQ13 NC A7 DQ4 VDD E VDD DQ12 NC A16 DQ5 VSS F DQ11 DQ10 A8 A9 DQ7 DQ6 G DQ9 NC A10 A11 WE DQ8 H NC A12 A13 A14 A15 NC 6 mm x 8 mm, 0.75 mm Bump Pitch Top View Package U TSOP-II 128K x 16-Pin Configuration A4 A3 A2 A1 A0 CE DQ1 DQ2 DQ3 DQ4 VDD VSS DQ5 DQ6 DQ7 DQ8 WE A15 A14 A13 A12 A16 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Top view 44-pin TSOP II 16 17 18 19 20 21 22 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 A5 A6 A7 OE UB LB DQ16 DQ15 DQ14 DQ13 VSS VDD DQ12 DQ11 DQ10 DQ9 NC A8 A9 A10 A11 NC Package TP Rev: 1.09a 4/2009 2/16 Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com. (c) 2001, GSI Technology GS72116ATP/T/U Block Diagram A0 Address Input Buffer Row Decoder Memory Array Column Decoder A16 CE WE Control OE _____ UB I/O Buffer DQ1 DQ16 Truth Table CE OE WE LB UB DQ1 to DQ8 DQ9 to DQ16 VDD Current H X X X X Not Selected Not Selected ISB1, ISB2 L L Read Read L H Read High Z H L High Z Read L L Write Write L H Write Not Write, High Z H L Not Write, High Z Write L L L X H L L H H X X High Z High Z L X X H H High Z High Z IDD Note: X: "H" or "L" Rev: 1.09a 4/2009 3/16 Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com. (c) 2001, GSI Technology GS72116ATP/T/U Absolute Maximum Ratings Parameter Symbol Rating Unit Supply Voltage VDD -0.5 to +4.6 V Input Voltage VIN -0.5 to VDD +0.5 (4.6 V max.) V Output Voltage VOUT -0.5 to VDD +0.5 (4.6 V max.) V Allowable power dissipation PD 0.7 W Storage temperature TSTG -55 to 150 o C Note: Permanent device damage may occur if Absolute Maximum Ratings are exceeded. Functional operation shall be restricted to Recommended Operating Conditions. Exposure to higher than recommended voltages for extended periods of time could affect device reliability. Recommended Operating Conditions Parameter Symbol Min Typ Max Unit Supply Voltage for -7/-8/-10/12 VDD 3.0 3.3 3.6 V Input High Voltage VIH 2.0 -- VDD +0.3 V Input Low Voltage VIL -0.3 -- 0.8 V Ambient Temperature, Commercial Range TAc 0 -- 70 oC Ambient Temperature, Industrial Range TAI -40 -- 85 o C Notes: 1. Input overshoot voltage should be less than VDD +2 V and not exceed 20 ns. 2. Input undershoot voltage should be greater than -2 V and not exceed 20 ns. Capacitance Parameter Symbol Test Condition Max Unit Input Capacitance CIN VIN = 0 V 5 pF Output Capacitance COUT VOUT = 0 V 7 pF Notes: 1. Tested at TA = 25C, f = 1 MHz 2. These parameters are sampled and are not 100% tested. Rev: 1.09a 4/2009 4/16 Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com. (c) 2001, GSI Technology GS72116ATP/T/U DC I/O Pin Characteristics Parameter Symbol Test Conditions Min Max Input Leakage Current IIL VIN = 0 to VDD - 1 uA 1 uA Output Leakage Current ILO Output High Z VOUT = 0 to VDD -1 uA 1 uA Output High Voltage VOH IOH = -4mA 2.4 -- Output Low Voltage VOL ILO = +4mA -- 0.4 V Power Supply Currents Parameter Symbol Test Conditions Operating Supply Current 0 to 70C -40 to 85C 7 ns 8 ns 10 ns 12 ns 7 ns 8 ns 10 ns 12 ns IDD (max) CE VIL All other inputs VIH or VIL Min. cycle time IOUT = 0 mA 145 mA 125 mA 100 mA 85 mA 150 mA 130 mA 105 mA 90 mA Standby Current ISB1 (max) CE VIH All other inputs VIH or VIL Min. cycle time 25 mA 20 mA 20 mA 15 mA 30 mA 25 mA 25 mA 20 mA Standby Current ISB2 (max) CE VDD - 0.2 V All other inputs VDD - 0.2 V or 0.2 V Rev: 1.09a 4/2009 5 mA 10 mA 5/16 Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com. (c) 2001, GSI Technology GS72116ATP/T/U AC Test Conditions Output Load 1 Parameter Conditions Input high level VIH = 2.4 V Input low level VIL = 0.4 V 50 Input rise time tr = 1 V/ns VT = 1.4 V Input fall time tf = 1 V/ns Input reference level 1.4 V Output Load 2 Output reference level 1.4 V 3.3 V Output load Fig. 1& 2 DQ Rev: 1.09a 4/2009 589 DQ Notes: 1. Include scope and jig capacitance. 2. Test conditions as specified with output loading as shown in Fig. 1 unless otherwise noted. 3. Output load 2 for tLZ, tHZ, tOLZ and tOHZ 6/16 Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com. 30pF1 5pF1 434 (c) 2001, GSI Technology GS72116ATP/T/U AC Characteristics Read Cycle Parameter Symbol Read cycle time -7 -8 -10 -12 Unit Min Max Min Max Min Max Min Max tRC 7 -- 8 -- 10 -- 12 -- ns Address access time tAA -- 7 -- 8 -- 10 -- 12 ns Chip enable access time (CE) tAC -- 7 -- 8 -- 10 -- 12 ns Byte enable access time (UB, LB) tAB -- 3 -- 3.5 -- 4 -- 5 ns Output enable to output valid (OE) tOE -- 3 -- 3.5 -- 4 -- 5 ns Output hold from address change tOH 3 -- 3 -- 3 -- 3 -- ns Chip enable to output in low Z (CE) tLZ* 3 -- 3 -- 3 -- 3 -- ns Output enable to output in low Z (OE) tOLZ* 0 -- 0 -- 0 -- 0 -- ns Byte enable to output in low Z (UB, LB) tBLZ* 0 -- 0 -- 0 -- 0 -- ns Chip disable to output in High Z (CE) tHZ* -- 3.5 -- 4 -- 5 -- 6 ns Output disable to output in High Z (OE) tOHZ* -- 3 -- 3.5 -- 4 -- 5 ns Byte disable to output in High Z (UB, LB) tBHZ* -- 3 -- 3.5 -- 4 -- 5 ns * These parameters are sampled and are not 100% tested. Read Cycle 1: CE = OE = VIL, WE = VIH, UB and, or LB = VIL tRC Address tAA tOH Data Out Rev: 1.09a 4/2009 Previous Data Data valid 7/16 Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com. (c) 2001, GSI Technology GS72116ATP/T/U Read Cycle 2: WE = VIH tRC Address tAA CE tAC tHZ tLZ tAB UB, LB tBHZ tBLZ OE tOE tOHZ Data valid tOLZ High impedance Data Out Write Cycle Parameter Symbol Write cycle time -7 -8 -10 -12 Unit Min Max Min Max Min Max Min Max tWC 7 -- 8 -- 10 -- 12 -- ns Address valid to end of write tAW 5 -- 5.5 -- 7 -- 8 -- ns Chip enable to end of write tCW 5 -- 5.5 -- 7 -- 8 -- ns Byte enable to end of write tBW 5 -- 5.5 -- 7 -- 8 -- ns Data set up time tDW 3.5 -- 4 -- 5 -- 6 -- ns Data hold time tDH 0 -- 0 -- 0 -- 0 -- ns Write pulse width tWP 5 -- 5.5 -- 7 -- 8 -- ns Address set up time tAS 0 -- 0 -- 0 -- 0 -- ns Write recovery time (WE) tWR 0 -- 0 -- 0 -- 0 -- ns Write recovery time (CE) tWR1 0 -- 0 -- 0 -- 0 -- ns Output Low Z from end of write tWLZ* 3 -- 3 -- 3 -- 3 -- ns Write to output in High Z tWHZ* -- 3 -- 3.5 -- 4 -- 5 ns * These parameters are sampled and are not 100% tested. Rev: 1.09a 4/2009 8/16 Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com. (c) 2001, GSI Technology GS72116ATP/T/U Write Cycle 1: WE control tWC Address tAW tWR OE tCW CE tBW UB, LB tAS tWP WE tDW tDH Data valid Data In tWHZ tWLZ Data Out High impedance Write Cycle 2: CE control tWC Address tAW tWR1 OE tAS tCW CE tBW UB, LB tWP WE tDW Data valid Data In Data Out Rev: 1.09a 4/2009 tDH High impedance 9/16 Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com. (c) 2001, GSI Technology GS72116ATP/T/U Write Cycle 3: UB, LB control tWC Address tAW tWR1 OE tAS tCW CE tBW UB, LB tWP WE tDW Data valid Data In Data Out Rev: 1.09a 4/2009 tDH High impedance 10/16 Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com. (c) 2001, GSI Technology GS72116ATP/T/U 44-Pin, 400 mil TSOP-II nom max min nom max A -- -- 0.047 -- -- 1.20 A1 0.002 -- -- 0.05 -- -- A2 0.037 0.039 0.041 0.95 1.00 1.05 B 0.01 0.014 0.018 0.25 0.35 0.45 c -- 0.006 -- -- 0.15 -- D 0.721 0.725 0.729 18.31 18.41 18.51 E 0.396 0.400 0.404 10.06 10.16 10.26 e -- 0.031 -- -- 0.80 -- HE 0.455 0.463 0.471 11.56 11.76 11.96 L 0.016 0.020 0.024 0.40 0.50 0.60 L1 -- 0.031 -- -- 0.80 -- Q y -- -- 0.004 -- -- 0.10 Q 0o -- 5o 0o -- 5o A HE E min 22 e B L1 A1 A y Detail A Dimension in mm Symbol A2 1 Dimension in inch c 23 L D 44 Notes: 1. Dimension D& E do not include interlead flash. 2. Dimension B does not include dambar protrusion/intrusion. 3. Controlling dimension: mm Rev: 1.09a 4/2009 11/16 Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com. (c) 2001, GSI Technology GS72116ATP/T/U 44-Pin TQFP (LQFP) Package A2 D1 A1 E1 L1 C e Body Size E1 D1 10 10 Lead Count 44 b Standoff Body Thickness Lead Length Lead Width Lead Thickness Lead Pitch A1 A2 L1 b c e 0.1 1.4 1.0 0.3 0.127 0.8 Units: mm Rev: 1.09a 4/2009 12/16 Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com. (c) 2001, GSI Technology GS72116ATP/T/U 6 mm x 8 mm Fine Pitch BG 0.36(typ) D H G F E D C B A 0.22 0.05 1 0.75(typ). 3.75 3 4 5.25 Rev: 1.09a 4/2009 13/16 Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com. Ball Dia. 0.35 Pitch 0.75 6 5 Bottom View 2 pin A1 index 1.20(max) pin A1 index units: mm Top View 6.00 0.10 8.00 0.10 0.10 (c) 2001, GSI Technology GS72116ATP/T/U Ordering Information Part Number* Package Access Time Temp. Range GS72116ATP-7 400 mil TSOP-II 7 ns Commercial GS72116ATP-8 400 mil TSOP-II 8 ns Commercial GS72116ATP-10 400 mil TSOP-II 10 ns Commercial GS72116ATP-12 400 mil TSOP-II 12 ns Commercial GS72116ATP-7I 400 mil TSOP-II 7 ns Industrial GS72116ATP-8I 400 mil TSOP-II 8 ns Industrial GS72116ATP-10I 400 mil TSOP-II 10 ns Industrial GS72116ATP-12I 400 mil TSOP-II 12 ns Industrial GS72116AGP-7 RoHS-compliant 400 mil TSOP-II 7 ns Commercial GS72116AGP-8 RoHS-compliant 400 mil TSOP-II 8 ns Commercial GS72116AGP-10 RoHS-compliant 400 mil TSOP-II 10 ns Commercial GS72116AGP-12 RoHS-compliant 400 mil TSOP-II 12 ns Commercial GS72116AGP-7I RoHS-compliant 400 mil TSOP-II 7 ns Industrial GS72116AGP-8I RoHS-compliant 400 mil TSOP-II 8 ns Industrial GS72116AGP-10I RoHS-compliant 400 mil TSOP-II 10 ns Industrial GS72116AGP-12I RoHS-compliant 400 mil TSOP-II 12 ns Industrial GS72116AT-7 44-pin TQFP 7 ns Commercial GS72116AT-8 44-pin TQFP 8 ns Commercial GS72116AT-10 44-pin TQFP 10 ns Commercial GS72116AT-12 44-pin TQFP 12 ns Commercial GS72116AT-7I 44-pin TQFP 7 ns Industrial GS72116AT-8I 44-pin TQFP 8 ns Industrial GS72116AT-10I 44-pin TQFP 10 ns Industrial GS72116AT-12I 44-pin TQFP 12 ns Industrial GS72116AGT-7 RoHS-compliant 44-pin TQFP 7 ns Commercial GS72116AGT-8 RoHS-compliant 44-pin TQFP 8 ns Commercial GS72116AGT-10 RoHS-compliant 44-pin TQFP 10 ns Commercial GS72116AGT-12 RoHS-compliant 44-pin TQFP 12 ns Commercial Notes: 1. Customers requiring delivery in Tape and Reel should add the character "T" to the end of the part number. For example: GS72116TP-8T. Rev: 1.09a 4/2009 14/16 Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com. (c) 2001, GSI Technology GS72116ATP/T/U Ordering Information Part Number* Package Access Time Temp. Range GS72116AGT-7I RoHS-compliant 44-pin TQFP 7 ns Industrial GS72116AGT-8I RoHS-compliant 44-pin TQFP 8 ns Industrial GS72116AGT-10I RoHS-compliant 44-pin TQFP 10 ns Industrial GS72116AGT-12I RoHS-compliant 44-pin TQFP 12 ns Industrial GS72116AU-7 6 mm x 8 mm Fine Pitch BGA 7 ns Commercial GS72116AU-8 6 mm x 8 mm Fine Pitch BGA 8 ns Commercial GS72116AU-10 6 mm x 8 mm Fine Pitch BGA 10 ns Commercial GS72116AU-12 6 mm x 8 mm Fine Pitch BGA 12 ns Commercial GS72116AU-7I 6 mm x 8 mm Fine Pitch BGA 7 ns Industrial GS72116AU-8I 6 mm x 8 mm Fine Pitch BGA 8 ns Industrial GS72116AU-10I 6 mm x 8 mm Fine Pitch BGA 10 ns Industrial GS72116AU-12I 6 mm x 8 mm Fine Pitch BGA 12 ns Industrial GS72116AGU-7 RoHS-compliant 6 mm x 8 mm Fine Pitch BGA 7 ns Commercial GS72116AGU-8 RoHS-compliant 6 mm x 8 mm Fine Pitch BGA 8 ns Commercial GS72116AGU-10 RoHS-compliant 6 mm x 8 mm Fine Pitch BGA 10 ns Commercial GS72116AGU-12 RoHS-compliant 6 mm x 8 mm Fine Pitch BGA 12 ns Commercial GS72116AGU-7I RoHS-compliant 6 mm x 8 mm Fine Pitch BGA 7 ns Industrial GS72116AGU-8I RoHS-compliant 6 mm x 8 mm Fine Pitch BGA 8 ns Industrial GS72116AGU-10I RoHS-compliant 6 mm x 8 mm Fine Pitch BGA 10 ns Industrial GS72116AGU-12I RoHS-compliant 6 mm x 8 mm Fine Pitch BGA 12 ns Industrial Notes: 1. Customers requiring delivery in Tape and Reel should add the character "T" to the end of the part number. For example: GS72116TP-8T. Rev: 1.09a 4/2009 15/16 Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com. (c) 2001, GSI Technology GS72116ATP/T/U 2Mb Asynchronous Datasheet Revision History Rev. Code: Old; New Types of Changes Format or Content Revisions * Creation of new datasheet 72116A_r1 72116A_r1; 72116A_r1_01 Content * Added 6 ns speed bin to entire document 72116A_r1_01; 72116A_r1_02 Content * Updated all power numbers * Changed 6 mm x 10 mm FP_BGA package designator from U to X 72116A_r1_02; 72116A_r1_03 Content * Updated Recommended Operating Conditions table on page 5 * Removed 15 ns bin * Changed FPBGA package from 6 x 10 to 6 x 8 (package U) 72116A_r1_03; 72116A_r1_04 Content * Removed 6 ns speed bin from entire document * Added 7 ns speed bin to entire document 72116A_r1_04; 72116A_r1_05 Content * Corrected title of 6 x 8 FPBGA mechanical drawing 72116A_r1_05; 72116A_r1_06 Content/Format 72116A_r1_06; 72116A_r1_07 Content * Added RoHS-compliant information for TQFP and FP-BGA packages 72116A_r1_07; 72116A_r1_08 Content * Added RoHS-compliant 400 mil SOJ 72116A_r1_08; 72116A_r1_09 Content * Updated to MP in ordering information table * Removed Status Column from Ordering Information table, removed references to SOJ Rev: 1.09a 4/2009 * Updated format * Added RoHS-compliant information for TSOP-II package 16/16 Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com. (c) 2001, GSI Technology