Modular Fuseholder Selection Table (8x32, 14x51, and 22x58) Part Numbers Series/ Size CH08 8X32 CH14 14X51 CH22 22X58 Max Catalog Numbers Voltage W/O Indication W/Indication & Current CH081D CH081DI CH081DNX 400Vac CH081DNS CH081DNSI 25A CH081DN CH081DNI IEC CH082D CH082DI 400Vac CH083D CH083DI 25A CH083DNS CH083DNSI CH083DN CH083DNI CH084D CH084DI UL/CSA CH141DICH1 40A CH141D CH141DMS -14X51 (5 Watt) UL/cURus CH141DNX IEC 600Vac/dc, CH141DN CH141DNI 690Vac, CH142D CH142DI 50A40A (5 Watt) CH143D CH143DI IEC CH143DMS 690Vac, CH143DN CH143DNI UL 50A CH143DNMS 600Vac/dc, CH144D CH144DI 100A CH221B NotCH22 (9.5 Watt) Not CH221BMS Available22X58IEC Available UL/cURus CH221BNX with 690Vac, with 600Vac/dc, CH221BN local 125A local 100A CH222B neon neon (9.5 Watt) CH223B indicatio indication IEC CH223BMS (remote (remote 690Vac, CH223BN microswitch microswitch 125A CH223BNMS only) only) CH224B IEC * * * * * * * * * * * * * * * * * * * * * * * * * * * * * UL Phase Configuration 1-pole 1 Neutral Pole 1-pole + Neutral 1-pole + Neutral 2-pole 3-pole 3-pole + Neutral 3-pole + Neutral 4-pole 1-pole 1-pole + Microswitch 1 Neutral Pole 1-pole + Neutral 2-pole 3-pole 3-pole + Microswitch 3-pole + Neutral 3-pole + Neutral + Microswitch 4-pole 1-pole 1-pole + Microswitch 1 Neutral Pole 1-pole + Neutral 2-pole 3-pole 3-pole + Microswitch 3-pole + Neutral 3-pole + Neutral + Microswitch 4-pole No. of 17.5mm Modules* 1 1 1 2 2 3 3 4 4 1.5 1.5 1.5 3 3 4.5 4.5 6 6 6 2 2 2 4 4 6 6 8 8 8 Box Qty. 12 12 12 6 6 4 4 3 3 6 6 6 3 3 2 2 1 1 1 6 6 6 3 3 2 2 1 1 1 Wire Range Maximum Torque 1-16mm2 (18-6 AWG) 2.5 N*m (22in-lb) 1-10mm2 (18-8 AWG) 1-16mm2 (18-8 AWG) 2.0 N*m (17.5in-lb) 2.5 N*m (22in-lb) 1-16mm2 (18-6 AWG) 2.5 N*m (22in-lb) 2.5-16mm2 (14-6 AWG) 3.0 N*m (26in-lb) 2.5-50mm2 (14-1 AWG) 4.0 N*m (35in-lb) UL Recognized (cURus) UL LIsted (cULus) *Holder width as compared to standard, i.e., 1 = 17.5mm module 2 = 35mm. **90V miminum required for illumination Recommended Cooper BussmannTM Fuses: 8x32 IEC Cylindrical - C08 Series 10x38 North American Class CC Fuses - LP-CC, FNQ-R, KTK-R Fuses - FNQ, KTK, AGU, KLM, BAF, FNM, FWA, FWC, C10 Series, PV Series 14x51 Fuses - FWX, FWH, FWP & NON, C14 Series 22x58 Fuses - FWP, C22 Series Manual Multi-phase Construction (8x32, 10x38, 14x51mm) Additional poles can be added by using the accessories shown on page 2 of this data sheet.The following components are required for each additional pole, up to a maximum of 4-poles. Part Number Description JV-L CH810-HP CH14-HP AL-D Multi-pole Connector Kit (10x38) 8x32 Handle Pin 14x51mm Handle Pin Multi-pole Connector Kit (8x32) Contact Cooper Bussmann Application Engineering for more information. 0210 BU-SB10208 Page 2 of 6 Data Sheet 2053 Accessories for use with the new CH Series of Modular Fuseholders (For diagram of multi-phase construction, see page 2) Accessory For Use with Fuse Holders Part Number No. of Poles Multi-Phase Connection Links Multi-Phase Connection Kit* CH08 and CH14 Series CHM and CHCC Series CH08 Series CH14 Series CH08 Series CH14 Series CH22 Series CH141 Series CH143 Series CHM and CHCC Series CH22 Series CH22 Series AL-D JV-L CH810-HP CH14-HP C08NL C14NL C22NL CH14MS-1D CH14MS-3D CH-PLC CH22IP20 CH22LS - - - - - - - 1 3 1 - - Multi-Phase Handle Pins Neutral Links Operated-Fuse Micro-Switches PLC Module (see page 6 for details) IP20 Kit Lock Support Box Quantity 12 - 12 10 5 2 1 12 5 *Kit contains 3-Spring pins and 6-connection links UL Listed (cULus) Multi-Phase Connection Links Neutral Links Multi-Phase Handle Pins Programmable Logic Controller (PLC) Operated-Fuse Microswitches Lock Support 0210 BU-SB10208 IP20 Kit Page 3 of 6 Data Sheet 2053 Dimensions - mm (in) 8x32mm 10x38mm 82.75 3.258 10.00 0.394 45.00 1.772 71.88 2.830 17.50 0.689 52.50 2.067 42.83 1.686 52.83 2.080 60.83 2.395 35.00 1.378 70.00 2.756 14x51mm 0210 BU-SB10208 Page 4 of 6 Data Sheet 2053 Dimensions - mm (in) 22x58mm Using High Speed Fuses (Semiconductor Protection) The CH Series of modular fuse holders may be used in conjunction with Class gR and aR high speed fuses. The continuous load current should not exceed that shown in the tables below for specific high speed fuse types/amp ratings so that the watts loss of the fuse does not exceed the watts loss capability of the holder. High speed fuses may also need to be derated based on specific application and ambient temperature. CH22 Series (22x58) CHM Series (10x38) High Speed Fuse Maximum Continuous Amps High Speed Fuse FWA-5A10F FWA-10A10F FWA-15A10F FWA-20A10F FWA-25A10F FWA-30A10F - 5 10 14 18 20 24 - FWC-6A10F FWC-8A10F FWC-10A10F FWC-12A10F FWC-16A10F FWC-20A10F FWC-25A10F FWC-32A10F 6 8 10 12 15 16 19 21 Maximum Continuous Amps High Speed Fuse Maximum Continuous Amps FWP-20A22F FWP-25A22F FWP-32A22F FWP-40A22F FWP-50A22F FWP-63A22F FWP-80A22F FWP-100A22F 20 25 32 40 50 58 66 78 CH14 Series (14x51) High Speed Fuse Maximum Continuous Amps High Speed Fuse Maximum Continuous Amps High Speed Fuse Maximum Continuous Amps FWX-5A14F FWX-10A14F FWX-15A14F FWX-20A14F FWX-25A14F FWX-30A14F 5 10 15 20 24 27 FWH-5A14F FWH-10A14F FWH-15A14F FWH-20A14F FWH-25A14F FWH-30A14F 5 10 14 18 21 22 FWP-5A14F FWP-10A14F FWP-15A14F FWP-20A14F FWP-25A14F FWP-30A14F 5 10 14 18 21 22 High Speed Fuse FWP-32A14F FWP-40A14F FWP-50A14F - Maximum Continuous Amps 27 32 38 - Please contact Cooper Bussmann Application Engineering for more information regarding high speed fuse application. 0210 BU-SB10208 Page 5 of 6 Data Sheet 2053 Remote Fuse Monitoring Accessory - CH-PLC UL Class CC, Midget and IEC 10x38 fuses Description Minimum Circuit Voltage: A resetable three-phase remote fuse monitor that integrates with a Programmable Logic Controller (PLC) or other monitoring and control equipment. Specifications: * Minimum circuit voltage required across the CH holder is 100Vac for the remote indication device to operate * Power Input: 24Vdc / 5mA * Sensing Voltage: 600V/30mA * Output Signals: Digital 0Vdc (Low), 24Vdc (High) - 0Vdc Low - Fuse is good - 24Vdc High - Fuse has opened When the fuse opens, the output signal is sent high and will remain high until the unit is reset * Rated Impulse Voltage: 8kV * Local Indication: Two distinct LEDs indicate unit power (green) and open fuse (red). Upon the replacement of the fuse, the actuation of the reset switch will reset the open fuse LED * Flammability Rating: UL 94V0 Wiring: * For power, signal and ground connections use 22-24AWG (0.25mm2) 300V rated wire Installation Technique: * Mounts on the left side of the fuse holder and mechanically interlocks with the fuse holder switch handle with hardware provided IP20 Rating: Yes Environmental Data: * Storage and Operating Temperature: -20C to 75C Agency Information: * UL 508 * cULus to CSA Standard 22.2 No.14 PLC Programming: * The CH-PLC signal line is designed to provide a digital input to a PLC I/O card. * Programmable Logic Control program must be written to properly interpret the input signal to the PLC. * The PLC program should check for consecutive high signals before taking action on a critical process. Emissions and Immunity Testing: * Electrostatic Discharge IEC 61000-4-2 * Electrical Fast Transient/Burst IEC 6100-4-4 * Surge Immunity IEC61000-4-5 Packaging: * The CH-PLC is packaged individually * A single unit monitors up to three phases * Package includes 0.11" (2.8mm) quick connects for power, signal and ground connections De-energize all circuits before installing or removing any CH-PLC devices and follow all prescribed safety procedures. The only controlled copy of this Data Sheet is the electronic read-only version located on the Cooper Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Cooper Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Cooper Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. (c) 2010 Cooper Bussmann St. Louis, MO 63178 www.cooperbussmann.com 0210 BU-SB10208 Page 6 of 6 Data Sheet 2053 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Eaton: CHM3 16375-1 16375-3 CH221DNX CH081D CH082D FWP-2A14F CH223DNMS CH143DMS CH223DMS CH082DI CH081DNI CH083DNS CH810-HP CH083DI CHCC3 CH14-HP CH221D FWP-5A14F CH221DMS ALD CH14MS-1D CH222D CH224D CH081DNS CH221DN FWP-15A14F CH081DI CHCC1DI CH084DI CH083DNSI CH14MS-3D CH084D CH081DN CH081DNSI CH223DN CH083D CH142B JV-L CH141B CH142BI CH143B CH143BI CH143BN CH143BMS