MRAC104SJH1VL - Winchester Electronics Corporation

RP / 2

Rack & Panel

62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com

Winchester/Retconn

MRAC Series Miniature Rectangular, Removable Contacts

Removable contacts offer a substantial savings

of time, labor and a great flexibility in the choice

of circuitry. The contact is easily removed with

the hand tool depicted and then placed by

hand or with a simple insertion tool.

The MRAC Series is an important extension of the MRA line featuring a variety

of crimp and solder removable contact styles. Except for body thickness, they

are similar and interchangeable with the MRA Series.

FEATURES

■Closed Entry

Removable Socket

and Pin Contacts.

■Connector Inserts with

9 to 104 Contacts.

■Quick Crimp ... Snap in

Place!

■To remove ... insert

removal tool — “Push

Out” Contact!

Current Rating:

Up to 13 amps

No. of

Contacts: 9, 14, 18, 20, 26, 34, 41, 42,

50, 66, 75, 104

Contacts: Must be ordered separately.

Select from crimp, solder, dip

solder, shielded or Wire-

Wrap termination contacts.

See 100 Series contact

section.

Contact

Identificaiton: Standard contact identifica-

tion is alphabetical except for

MRAC66 and 75 which have

numerical identification. To

order numerical identification

on MRAC 34, 50 or 104,

specify MNAC**P or S.

SPECIFICATIONS

Electrical Data: Meets high potential

performance of MIL-C-28748.

The dielectric withstanding

voltage is one minute

electrification at 2000 VAC

(sea level).

Dielectric: MRAC Series: Standard glass

filled diallyl phthalate, per MIL-

M-14, SDG-F, color gray.

Qualification: Military Versions are QPL’d to

M28748/3 and M28748/4.

Polarization: Gold plated guides provide

positive polarization. Polarized

nickel-plated brass and/or

passivated stainless steel with

anodized aluminum knobs available.

Hoods: Anodized aluminum. May be

applied to either plug or

receptacle. Both top and side

opening hoods available.

MILITARY CROSS REFERENCE

CATALOG NO.

MRAC 42P MS 18180-1

MRAC 42S MS 18181-1

MRAC 50P MS 18182-1

MRAC 50S MS 18183-1

MRAC 66P MS 18184-1

MRAC 66S MS 18185-1

MRAC 75P MS 18187-1

MRAC 75S MS 18188-1

MRAC 104P MS 18189-1

MRAC 104S MS 18190-1

CATALOG NO.

MRAC 9P MS 14007-1

MRAC 9S MS 14006-1

MRAC 14P MS 18174-1

MRAC 14S MS 18175-1

MRAC 20P MS 18176-1

MRAC 20S MS 18177-1

MRAC 26P MS 14008-1

MRAC 26S MS 14005-1

MRAC MS34P MS 18178-1

MRAC MS34S MS 18179-1

RP / 3

Rack & Panel

62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com

Winchester/Retconn

.38

1.000

.81

4-40

UNC 2A

THD.

.27 .86

.37

.86

Slot

.038

Wide

.78 .27

.52 .13R

.44

.937

1.250

.86

4-40

UNC 2A

THD.

.86

.27 .37 .37

Slot

.038

Wide

.78 .27

MRAC 18S-G MRAC 18P-G MRAC 20S-G MRAC 20P-G

MRAC 9S-G MRAC 9P-G MRAC 14S-G MRAC 14P-G

.52

.78

.27

.37

Slot

.038

Wide

.86

.27

.37

.52

.86

4-40

UNC 2A

THD.

1.078

1.250

1.563

.44

.22

.56

1.000

1.313

.78

4-40

UNC 2A

THD.

.86

.37 Slot

.038

Wide

.78

.37 .27

.52

.86

.075

Typ.

1.313

.09R .172

Typ. .09R

.075

Typ.

.78

.09R

.075

Typ.

.13R

.27

.09R .13R

.075

Typ.

.130 Typ. .130 Typ.

.130 Typ.

MRAC Series Miniature Rectangular, Removable Contacts

OUTLINE

possible for positive polarization and for

protection of contacts except for the MRAC

104 where the jackscrew locking device is

recommended.

Drawings and corresponding part numbers

show G type guide sockets. It is recom-

mended that guides be used wherever

Dimensions are for reference only and

are subject to change. Outline drawings

on request.

Standard Guide

Pin mates with all types

Brass

For High Electrical

Conductivity Beryllium

Copper

Guide

Socket Actual

Code Letter Size Photo

How To Order: To obtain “K” or “N”

guides in place of the standard “G” type,

substitute the desired socket style code

letter (“K” or “N”) for “G” in both the Plug

and Receptacle Code Numbers.

GUIDE SOCKETS

For General Use

Phosphor Bronze

For Extra Mechanical

Strength Brass

PHYSICAL DATA

Plug Recepticle No. of Wt. in Ozs.

Code Code Contactsw/o Contacts

No. No. Plug Rec.

MRAC9P MRAC9S 9 .15 .17

MRAC14P MRAC14S 14 .17 .2

MRAC18P MRAC18S 18 .17 .2

MRAC20P MRAC20S 20 .17 .25

MRAC26P MRAC26S 26 .42 .67

MRAC34P MRAC34S 34 .42 .67

Plug Recepticle No. of Wt. in Ozs.

Code Code Contacts w/o Contacts

No. No. Plug Rec.

MRAC41 MRAC41S 41 .5 .7

MRAC42P MRAC42S 42 .5 .7

MRAC50P MRAC50S 50 .6 .85

MRAC66P MRAC66S 66 .7 1.05

MRAC75P MRAC75S 75 .9 1.3

MRAC104P MRAC104S 104 1.2 1.78

* For passivated stainless steel add SS suffix

RP / 4

Rack & Panel

62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com

Winchester/Retconn

MRAC Series Miniature Rectangular, Removable Contacts

OUTLINE

Dimensions are for reference only and

are subject to change. Outline drawings

on request.

Mounting Note: Connectors MRAC 26, MRAC 20 and smaller, use guides for mounting in a hood or on a

panel. Connectors MRAC 34, MRAC 42, MRAC 50, MRAC 66, and MRAC 75 use four #4 machine screws, in

addition to guides, for mounting in a hood or on a panel. Guides are not recommended for use with MRAC

104. MRAC 104 uses four #6 machine screws for mounting.

*For numerical contact identification instead of alphabetical, order MNAC._______P or S available in sizes 34,

50 and 104. Example MNAC 34P. MRAC 66 and 75 have numerical contact identification as standard.

Drawings and corresponding part numbers show G type guide sockets except

for the MRAC104P and S which show JT hardware.

.56

.09R .13R

1.312

1.625

4-40 UNC

2A THD

.86

.27 .37

1.072

Slot

.038

Wide

.86 .52

.78

.37 .27 .75

.47 .23 .09R 4-40 UNC

2A THD

Slot

.038

Wide

.27

.37

.86 .78 .27

.37

1.688

2.000

1.375

.86 .52

Mounting

holes for

number 4

machine

screws

.75

.47 .23 .09R 4-40 UNC

2A THD

Slot

.038

Wide

.27 .37

.86 .78

.27

.37

2.313

1.672

.86 .52

2.000

.73

.44

.09R .13R

2.312

2.625

4-40 UNC

2A THD

.86

.27 .37

2.125

Slot

.038

Wide

.86 .52

.78

.37 .27

.22

MRAC 41S-G MRAC 41P-G MRAC 42S-G MRAC 42P-G

MRAC 26S-G MRAC 26P-G MRAC 34S-G MRAC 34P-G

.075

Typ

.130 Typ

.075

Typ

.180 Typ

Mounting

holes for

number 4

machine

screws

.075

Typ

.180 Typ

.075

Typ

.130 Typ

RP / 5

Rack & Panel

62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com

Winchester/Retconn

MRAC Series Miniature Rectangular, Removable Contacts

OUTLINE

Dimensions are for reference only and

are subject to change. Outline drawings

on request.

Mounting Note: Connectors MRAC 26, MRAC 20 and smaller, use guides for mounting in a hood or on a

panel. Connectors MRAC 34, MRAC 42, MRAC 50, MRAC 66, and MRAC 75 use four #4 machine screws, in

addition to guides, for mounting in a hood or on a panel. Guides are not recommended for use with MRAC

104. MRAC 104 uses four #6 machine screws for mounting.

*For numerical contact identification instead of alphabetical, order MNAC._______P or S available in sizes 34,

50 and 104. Example MNAC 34P. MRAC 66 and 75 have numerical contact identification as standard.

Drawings and corresponding part numbers show G type guide sockets except

for the MRAC104P and S which show JT hardware.

1.109 .31R

MRAC 75S-G MRAC 75P-G MRAC 104S-JT * MRAC 104P-J

MRAC 50S-G MRAC 50P-G MRAC 66S-G MRAC 66P-G

.47 .88 .75 .23

1.972.594

2.719

2.282

.73 .16R

Mounting

holes for

number 4

machine

screws .86 .52

.27

4-40

UNC

2A THD

.14

.86

Slot

.038

Wide

.37

.09 .78

.37 .27 .50

1.125

.25

1.969

2.281

1.672

4-40

UNC

2A THD

.86

.27 .37 Slot

.038

Wide

.78

.37 .27

.52

.86

.80 .27

.37

.16

6-32

UNC

2A THD.

.52

.16.16

.86

2.750

2.375

1.469 .38R

.88.44 .37 .16

.038 Dia. holes

for safety wire

1.359

1.094 .16R .86 .52

1.234

.77

.23

.97

.14 Slot

.038

Wide

.09 .78

.37 .27

.86

.37

.27

4-40

UNC

2A THD

1.109

2.719

2.282

2.594

1.531

8-32

UNC

THD.

.075

Typ

.180 Typ

2.000

Mounting

holes for

number 4

machine

screws

.150

Typ

.180 Typ

Mounting

holes for

number 6

machine

screws

.075

Typ

.180 Typ

Mounting

holes for

number 4

machine

screws

.075

Typ

.180 Typ

RP / 6

Rack & Panel

62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com

Winchester/Retconn

Jacksocket

Jackscrew

4-40 UNC except size

104/6-32 UNC 6-32 UNC THD. except

size 104/8-32 UNC

.78

.16 Hood Self Locking

Top Cable

Opening

Side Cable

Opening

Mono-

Jackscrew

Top Cable

Opening

Mono-

Jacksocket 052 Dia. Safety

Wire Hole

.16

Side Cable

Opening

MRAC Series Miniature Rectangular, Removable Contacts

JACKSCREWS & JACKSOCKETS

Polarized jackscrews give the ease and

assurance of threaded positive coupling.

The actuating side consists of two turnable

screws, one male and one female, each with

knurled and slotted knobs. On the mating half

are the two fixed screws required to

complete the locking action. When mated,

the jackscrews may be locked with a safety

wire through the hole in the self-locking pin

(in the jackscrew shaft).

OUTLINE

DIMENSIONS

Connector with fixed Jackscrews

Code designation: J

AND

Mating connector half with turnable

Jackscrews-with-Knobs.

Code designation: JT

Mating connector half with Hood and

turnable Long Jackscrews-with-

Knobs. Code designation: JTC H,

JTC H1

Mating connector half with Hood and

turnable Monojacks.

Code designation: JTDH, JTDH1

New Monojacks Assemble and Disassemble With Remarkable Ease and Speed

To free the connector from the hood, simply

remove four screws. Monojacks may be used

on miniature rectangular connectors with from

34 to 104 contacts and with molds featuring

guide hole and two mounting holes on both

ends. Molds have 2 center thru holes and 4

mounting holes.

Dimension A Dimension B

H H1H8H9H13H H1H8H9

MRAC 9 – .59 – – .59 – – – – .80 1.31 –2.41 ––2.41 ––––

MRAC 14 – .59 – – .59 – – – – .80 1.31 – 2.41 – – 2.41 – – – –

MRAC 18 – .59 – – .59 – – – – .80 1.31 – 2.41 – – 2.41 – – – –

MRAC 20 – .59 – – .59 – – – – .80 1.31 – 2.41 – – 2.41 – – – –

MRAC 26 .80 .59 .59 .59 – – – – – .80 1.31 2.61 2.41 2.41 2.41 – – – – –

MRAC 34 .63 .63 .63 .63 – .63 .63 .63 .63 .80 1.31 2.41 2.41 2.41 – – – 2.41 2.41 2.41

MRAC 41 .63 .63 – – – – – – – .80 1.31 2.41 2.41 – – – – – – –

MRAC 42 .58 .58 .58 .58 – .58 .58 .58 .58 .80 1.31 2.41 2.41 2.41 – – 2.41 2.41 2.41 2.41

MRAC 50 .58 .58 .58 .58 – .58 .58 .58 .58 .80 1.31 2.41 2.41 2.41 – – 2.41 2.41 2.41 2.41

MRAC 66 .69 – – .69 – .5 – – .5 .80 1.31 2.41 – – 2.41 – 2.41 – – 2.41

MRAC 75 .56 .56 .56 .56 – .56 .56 .56 .56 .80 1.31 2.41 2.41 2.41 – – 2.41 2.41 2.41 2.41

MRAC 104 .5 – – .67 – .5 – – .5 .80 1.52 3.42 – – 3.42 – 3.25 – – 3.25

Dimension E Dimension F

H H1 H8 H9 H13 H H1 H8 H9

Connector

Size

Dimensions are for reference only and

are subject to change. Outline drawings

on request.

MOLDINGS HAVE STRAIGHT THRU HOLES

MONOJACKS ARE CAPTIVATED IN KEYHOLE

SLOT OF HOOD AS SHOWN ABOVE. WHEN

USING SHELLS, MONOJACKS ARE CAPTIVATED

IN KEYHOLE OF SHELL AND CLEARANCE HOLES

ARE PLACED IN HOODS.

RP / 7

Rack & Panel

62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com

Winchester/Retconn

MRAC Series Miniature Rectangular, Removable Contacts

OUTLINE

JACKSCREW & JACKSOCKETS

Type JTCW

HH1H8H9H13

Dimension A

9– 2.22 – – 2.22

14 – 2.22 – – 2.22

18 – 2.22 – – 2.22

20 – 2.22 – 2.22 2.22

26 2.22 2.22 2.22 2.22 –

34 2.22 2.22 2.22 2.22 –

41 2.22 2.22 – – –

42 2.22 2.22 2.22 2.22 –

50 2.22 2.22 2.22 2.22 –

66 2.22 – – 2.22 –

75 2.22 2.22 2.22 2.22 –

Size Type JTCU

HH1H8H9H13

Dimension A

9– 2.47 – – 2.47

14 – 2.47 – – 2.47

18 – 2.47 – – 2.47

20 – 2.47 – 2.47 2.47

26 2.47 2.47 2.47 2.47 –

34 2.47 2.47 2.47 2.47 –

41 2.47 2.47 – – –

42 2.47 2.47 2.47 2.47 –

50 2.47 2.47 2.47 2.47 –

66 2.47 – – 2.47 –

75 2.47 2.47 2.47 2.47 –

Size Size Size

Dimension A

9– 2.47 – – 2.47

14 – 2.47 – – 2.47

18 – 2.47 – – 2.77

20 – 2.47 – 2.47 2.47

26 2.73 2.47 2.47 2.47 –

34 2.47 2.47 2.47 2.47 –

41 2.47 2.47 – – –

42 2.47 2.47 2.47 2.47 –

50 2.47 2.47 2.47 2.47 –

66 2.47 – – 2.47 –

75 2.47 2.47 2.47 2.47 –

Type JTCX

HH1H8H9H13

Dimension A

9– 2.34 – – 2.34

14 – 2.34 – – 2.34

18 – 2.34 – – 2.34

20 – 2.34 – 2.34 2.34

26 2.61 2.34 2.34 2.34 –

34 2.34 2.34 2.34 2.34 –

41 2.34 2.34 – – –

42 2.34 2.34 2.34 2.34 –

50 2.34 2.34 2.34 2.34 –

66 2.34 – – 2.34 –

75 2.34 2.34 2.34 2.34 –

Type JTCZ

HH1H8H9H13

DIMENSIONS

All jackscrews and sockets are stainless steel, passivated except J & JTD which are nickel plated brass.

All knobs are aluminum, anodized except JTW and JTCW which are stainless steel, passivated.

Hood Type

Dimensions are for reference only and are subject to change. Outline drawings on request.

.19 Dia.

.078 INT. HEX.

.22 Dia.

.25

HEX.

.50

.22

Dia.

JTCZJTCXJTCUJTCW

.078 INT. HEX.

.19 Dia.

.36 1

.22 Dia.

.78

.25 HEX.

JTX

.80 Typ.

.16 Typ. 6-32 UNC 2 THD.

6-32 UNC 2 THD.

(Typ.)

JTUJTW

RP / 8

Rack & Panel

62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com

Winchester/Retconn

DIMENSIONS Wt. Fits

A B C D E F G Oz. Connector

MRE9H-1 .28 1.28 1.63 1.31 .44 .31D – .3

MRE9H-9 .28 1.28 1.61 1.31 .44 .59 .31 .3 MRAC9 (P or S)

MRE14H-1 .28 1.28 1.69 1.25 .5 .38D – .3

MRE14H-9 .28 1.28 1.55 1.25 .5 .59 .38 .3 MRAC14 (P or S)

MRE18H-1 .28 1.28 1.75 1.31 .63 .44D – .3

MRE18H-9 .28 1.28 1.81 1.31 .63 .69 .44 .3 MRAC18 (P or S)

MRE20H-1 .28 1.28 2 1.56 .5 .38D – .3

MRE20H-9 .28 1.28 1.86 1.56 .5 .66 .38 .3 MRAC20 (P or S)

MRE26H-1 .28 1.28 2.06 1.63 .64 .59 .38 .4

MRE26H-9 .28 1.28 2.13 1.63 .64 .78 .44 .4 MRAC26 (P or S)

MRE34H-1 .28 1.25 2.42 2 .83 .66D – .6

MRE34H-9 .28 1.25 – 2 .83 .81 .56 .6 MRAC34 (P or S)

MRE41H-1 .28 1.25 3.06 2.63 .5 .66 .44 .6 MRAC41 (P or S)

MRE42H-1 .09 1.30 2.73 2.31 .83 .63 .5 .7

MRE42H-9 .09 1.30 – 2.31 .83 .84 .56 .7 MRAC42 (P or S)

MRE50H-1 .09 1.30 3.02 2.59 .83 .63 .5 .8

MRE50H-9 .09 1.30 – 2.59 .83 1.06 .56 .8 MRAC50 (P or S)

MRE75H-1 .09 1.31 3.02 2.59 1.19 .63 .88 1.0

MRE75H-9 .09 1.31 – 2.59 1.19 1 .88 1.0 MRAC75 (P or S)

MRAC Series Miniature Rectangular, Removable Contacts

OUTLINE

FORMED ALUMINUM HOODS

Dimensions are for reference only and

are subject to change. Outline drawings

on request.

Hoods shown are MRE Hoods for use

with MRAC Connectors

Code No. Cable

Opening Code

No.

Cable

Opening

Top Cable Opening Side Cable Opening

DIMENSIONS

Formed Hoods for MRAC Connectors are

available in top and side opening for most

MRAC Connectors - Deep Drawn Hoods are

available for MRAC 34, MRAC 66 and MRAC

104 connectors ... providing additional strength.

Hoods and cable clamps are of anodized

aluminum. They provide support and strain

relief for the cable and may be applied to either

Plug or Receptacle.

Hoods may be ordered separately (see code

numbers in the tables below) or assembled on

connectors.

DIMENSIONS Wt. Fits

A B C D E F G Oz. Connector

MRE9H-13 .28 1.28 1.58 1.31 .44 .59 .31 .3 MRAC9 (P or S)

MRE14H-13 .28 1.28 1.58 1.25 .5 .59 .38 .3 MRAC14 (P or S)

MRE18H-13 .28 1.28 1.78 1.31 .63 .61 .44 .3 MRAC18 (P or S)

MRE20H-13 .28 1.28 1.58 1.56 .5 .66 .38 .3 MRAC20 (P or S)

MRE26H .28 1.28 1.72 1.63 .64 .59 .38 .4

MRE26H-8 .28 1.28 1.78 1.63 .64 .78 .44 .4 MRAC26 (P or S)

MRE34H .28 1.25 1.69 2 .83 .66D – .6

MRE34H-8 .28 1.25 1.75 2 .83 1.06 .56 .6 MRAC34 (P or S)

MRE41H .28 1.25 1.69 2.63 .5 .66 .44 .6 MRAC41 (P or S)

MRE42H .09 1.30 1.73 2.31 .83 .63D – .7

MRE42H-8 .09 1.30 1.80 2.31 .83 1.06 .56 .7 MRAC42 (P or S)

MRE50H .09 1.30 1.73 2.59 .83 .63D – .8

MRE50H-8 .09 1.30 1.80 2.59 .83 1.06 .56 .8 MRAC50 (P or S)

MRE75H .09 1.31 1.75 2.59 1.19 .63 .88 1.0

MRE75H-8 .09 1.31 1.86 2.59 1.19 1 .88 1.0 MRAC75 (P or S)

RP / 9

Rack & Panel

62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com

Winchester/Retconn

DIMENSIONS - Side Opening

ABCD E H G

MRA 34H9-491 2.08 .83 1.17 2.59 .64 x .75 1.06 1.688 .6

MRA 66H9 2.38 1.22 1.17 2.92 .84 Dia. 1.34 1.969 .8

MRA 104H9 2.84 1.63 2.23 3.39 1.19 Dia.1.63 2.375 1.0

DIMENSIONS - Top Opening

ABCD E HG

MRA 34H-491 2.08 .83 1.17 1.59 .66 x .75 – 1.688 .6

MRA 66H 2.38 1.22 1.17 1.69 1.03 Dia. – 1.969 .8

MRA 104H 2.84 1.63 2.23 2.75 1.19 Dia. – 2.375 1.0

MRAC Series Miniature Rectangular, Removable Contacts

Lock Tabs (MRE-V shown) Lever & Pivot Assemblies (MRE-VL shown)

Designed for MRAC connectors, this vibration

lock features genuine simplicity of design, plus

complete locking effectiveness. Assembly of

either the lever-and-pivot assembly or the lock

DIMENSIONS / OUTLINE

MOUNTING BRACKETS

DIMENSIONS

AB C DEFG H

MRE 50B 1.06 .688 3.031 3.44 .13 .28 .78

MRE 75B 1.48 1.047 3.062 3.56 .14 .30 1.14

Code No.

.128 Dia 3 Holes

(No. 4 Mounting

Screw)

.150 Dia 3 Holes

(No. 6 Mounting

Screw)

Wt.

Oz.

Hoods shown are MRA Hoods for use with MRAC Connectors

MRAC 104P

MRAC 104S

MRAC 66P

MRAC 66S

MRAC 34P

MRAC 34S

Fits

Connector

Wt.

Oz.

Code No.

Top Cable Opening Side Cable Opening

MRAC 104P

MRAC 104S

MRAC 66P

MRAC 66S

MRAC 34P

MRAC 34S

Fits

Connector

Code No. Wt.

Oz.

Dimensions are for reference only and

are subject to change. Outline drawings

on request.

Lever

& Pilot

Assembly

MRE-VL

MRE-VL2

Used on

Connectors

MRAC 9, 14,

18, 20, 26, 34,

41, and 42

MRAC 50

MRAC 75

Lock Tabs

(See Note)

MRE-V

MRE-V2

Nomenclature

VIBRATION LOCKS

DIMENSIONS / OUTLINE

DRAWN ALUMINUM HOODS

MRAC 50 and MRAC 75 connectors

use the standard MRE 50 and

MRE 75 mounting brackets.

EFG

2.625

.11R Panel

Opening

.08

For MRA;

66;104

For MRA 34 Only

.1935 Dia. 2 Holes

(.228 Dia. 2 Holes For 104)

.08

Cable

Opening

Cable

Opening

Note 1:When panel mounting the lock-tab half of a MRAC 34, MRAC 42 or MRAC 50 connector, flat washers

(.033 minimum thickness) should be used on the mounting screws to shim the molding away from the panel.

Note 2: Each code number indicates two units, i.e., the “MRE-VL” consists of two levers and two pivots

(unassembled*), and the “MRE-V” consists of two tabs.

Note 3: These units are supplied unassembled to facilitate handling. The pivot is easily assembled to the

lever merely by inserting the hooked end through the lever opening. It will automatically snap into proper

position. Patent #2,760,174.

parts to the plug and receptacle is quick and easy.

The unit locks automatically when the mating plug

and receptacle are engaged. Unlocking and

disengaging can be done with one hand.

RP / 10

Rack & Panel

62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com

Winchester/Retconn

ORDERING INFORMATION

MRAC Series Miniature Rectangular, Removable Contacts

Omit steps not required H

Guides

G* Phosphor Bronze Cylindrical Guides

K Beryllium Copper Cylindrical Guides

N* Brass Cylindrical Guides

Guides are not recommended for Size 104

“P” indicates two guide pins or two jackscrews

(EX. JTCP)

“S” indicates two guide sockets or two jacksockets

(Ex. GS)

Jackscrew Locks

***J Polarized Fixed Jackscrew and Jacksocket

JT Polarized Short Turning Jackscrew and

Jacksocket

JTC Polarized Long Turning Jackscrew and

Jacksocket

JTD Polarized Long Turning Mono-Jackscrew and

Mono-Jacksocket for Sizes 34, 42, 50, 66,

75, and 104 only.

**JZ Same as J but with 6-32 mtg. thd. (Std. on

104)

**JTW Same as JT but with knurled round knob

with internal hex (not avail. 104)

**JTU Same as JT but with knurled round knob

with screwdriver slot (not avail. 104)

**JTX Same as JT but with hex knob (not avail.

104)

**JTCW Same as JTC but with knurled round knob

with internal hex (not avail. 104)

**JTCU Same as JTC but with knurled round knob

with screwdriver slot (not avail. 104)

**JTCX Same as JTC but with hex knob (not avail.

104)

**JTCZ Same as JTC but with prybar knob (not

avail. 104)

For passivated stainless steel add SS suffix.

Request availablity information.

***

Material: Nickel Plated Brass standard

GVL

■Step 7

Special

Options:

Consult Sales

Department

Notes: 1. Contacts are ordered separately. See 100 Series contact section of Rack & Panel

2. When ordering molding less hardware and hood for use with JTD Monojacks, connectors

must be ordered as follows:

Pin connector = MRAC 34P8, MRAC 42P8, etc.

Socket connector = MRAC 34S8, MRAC 42S8, etc.

The number “8” indicates special housing for use with the JTD Monojack hardware

(available on sizes 34, 42, 50, 66, 75 and 104).

34 S

MRAC

■Step 1

Series:

MRAC

MNAC

Numerical

contact

identification

on sizes 34,

50, and 104.

■Step 3

Contact

Designation:

P - Pin

S - Socket

When ordering

moldings less

hardware to be

used with

monojacks, see

note 2 below.

■Step 2

Number of

Contacts:

9, 14, 18, 20,

26, 34, 41,

42, 50, 66,

75, 104

See note 1

below.

■Step 4

Guides and

Jackscrew

Locks:

(See bottom

Chart)

■Step 5

Hoods:

H - Standard top opening.

Sizes 26 thru 104 only.

H1 - Standard side opening.

Available all sizes.

H8 - Large top opening.

Sizes 26 thru 104 only.

H9 - Large side opening.

Available all sizes.

H13 -Large top opening,

high hood. Sizes 9, 14,

18 & 20 only.

■Step 6

Vibration Locks:

V - Lock Tab

V2 - Lock Tab

(Size 50

& 75)

VL - Lever & Pivot

Ass’y

VL2 - Lever & Pivot

Ass’y (Size

50 & 75)

■Step 4

***