Model No. Applicable wire
Insulation O.D. (mm)
12
This ACH connector is compact and low
profile type, height: 1.4mm and width
4.3mm,1.2mm pitch wire-to-board
connector.
Specifications –––––––––––––––––––
• Current rating: 2A/1 to 3 circuits AC, DC (AWG #28)
1.5A/4 circuits AC, DC (AWG #28)
• Voltage rating: 50V AC, DC
• Temperature range: -25˚C to +85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/10m Ωmax.
After environmental testing/20m Ωmax.
• Insulation resistance: 100M Ωmin.
• Withstanding voltage: 500V AC/minute
• Applicable wire: Conductor size/AWG #30 to #28
Insulation O.D./0.5 to 0.63mm
* Compliant with RoHS.
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
Standards–––––––––––––––––––––––
0Recognized E60389
Contact
RoHS compliance
PC board layout (viewed from component side) and Assembly layout
Note: 1. Tolerances are non-cumulative:
±
0.05mm for all centers.
Note: 2. The dimensions above should serve as a guideline. Contact JST for details.
• Top entry but side feed type
• Connector for DC power supply
• Corresponding to sucking nozzle of pick and
place machine