JHS-142PIN - M/A-COM Technology Solutions, Inc.

• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400

• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588

Visit www.macomtech.com for additional data sheets and prod uct information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

Surface Mount Quadrature Hybrid,

200 - 400 MHz

Rev. V3

JHS-142

ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

Features

• Fully Hermetic

• Octave Bandwidth

• Low VSWR: 1.1:1 Typical

• Impedance: 50 Ohms Nominal

• Input Power: 5 Watts Max @ +25°C, De rated to 1

Watt @ +85°C

• Typical Phase Linearity: 3o from straight line

• MIL-STD-202 Screening Available

Description

3 dB Hybrids are ideal for dividing a signal into two

signals of equal amplitude and a constant 90° or

180° phase differential and for Quadrature combin-

ing or performing summation/differentia l combining.

SF-1

Pin Configuration

Pin No. Function Pin No. Function

1 A 3 D

2 B 4 C

Phasing Diagram

OUT

IN A B C D

A ISO -90° 0°

B ISO 0° -90°

C -90° 0° ISO

D 0° -90° ISO

Electrical Specifications1: TA = -55°C to +85°C

Parameter Test Conditions Frequency Units Min Typ Max

Insertion Loss 2 Less Coupling 200– 400 MHz dB — — 0.5

Isolation — 200– 400 MHz dB 18 — —

Amplitude Balance — 200– 400 MHz dB — — 1.0

VSWR — 200– 400 MHz Ratio — — 1.3:1

Deviation from

Quadrature — 200– 400 MHz ° — — 4

1. All specifications apply with 50 ohm source and load impedance.

2. Average of coupled output less 3 dB.

This product contains elements protected by United States Patent Number 3,484,724.