R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Trimmer Potentiometers Lead Sealed Type Multi-turns PV12/PV37/PV23/PV22/PV36 Series PV12 Series 0.60.1 0.70.1 Depth 3-0.50.1 Dia. 2.50.1 0. 2 2. 5 #2 2 0. 0.40.1 0.5 5 2. 1. The unique inner gear system recognizes the position of the center of the shaft of the potentiometer. 2. Sealed construction protects the interior from dust and liquid, which achieves stable performance. 3. Available for ultrasonic cleaning after soldering 4. Clutch mechanism prevents excessive wiper rotation. 7.01.0 6.60.1 7.60.1 Dia. Features #3 #2 #1 #1 906 PV12H #3 CLOCKWISE Applications mm (Tolerancein: 0.3 ) 1. HDTVs 2. Professional cameras 3. CATV 4. FAX 5. Printers 6. Sensors 7. Switching power supplies 0.60.1 0.70.1 Depth 7.01.0 3-0.50.1 Dia. 2.50.1 7.60.1 Dia. 6.60.1 0.5 2.5 2.5 #2 2.5 #2 #3 #1 #1 #3 CLOCKWISE PV12P mm (Tolerancein: 0.3 ) 7.70.3 #2 #3 7.60.3 9.00.3 5.10.3 0.5 2.50.1 7.01.0 3-0.50.1 Dia. #1 7.70.3 0.60.1 0.70.1 Depth 9.00.3 7.01.0 5.10.3 0.5 2.50.1 0.60.1 0.70.1 Depth 3-0.50.1 Dia. #1 6.30.3 #2 #3 7.60.3 6.30.3 #2 PV12S 8 2.5 2.5 3.6 #1 #1 #3 2.5 2.5 3.6 #2 PV12T CLOCKWISE mm (Tolerancein: 0.3 ) 2.5 2.5 #3 CLOCKWISE mm (Tolerance in: 0.3 ) Power Rating Soldering Method Number of Turns (Effective Rotation Angle) Total Resistance Value TCR PV12p100A01 0.5W(70C) Flow/Soldering Iron 4 10ohm 10% 100ppm/C PV12p200A01 0.5W(70C) Flow/Soldering Iron 4 20ohm 10% 100ppm/C PV12p500A01 0.5W(70C) Flow/Soldering Iron 4 50ohm 10% 100ppm/C PV12p101A01 0.5W(70C) Flow/Soldering Iron 4 100ohm 10% 100ppm/C PV12p201A01 0.5W(70C) Flow/Soldering Iron 4 200ohm 10% 100ppm/C PV12p501A01 0.5W(70C) Flow/Soldering Iron 4 500ohm 10% 100ppm/C PV12p102A01 0.5W(70C) Flow/Soldering Iron 4 1k ohm 10% 100ppm/C PV12p202A01 0.5W(70C) Flow/Soldering Iron 4 2k ohm 10% 100ppm/C PV12p502A01 0.5W(70C) Flow/Soldering Iron 4 5k ohm 10% 100ppm/C PV12p103A01 0.5W(70C) Flow/Soldering Iron 4 10k ohm 10% 100ppm/C Part Number Continued on the following page. 54 R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Power Rating Soldering Method Number of Turns (Effective Rotation Angle) Total Resistance Value TCR PV12p203A01 0.5W(70C) Flow/Soldering Iron 4 20k ohm 10% 100ppm/C PV12p503A01 0.5W(70C) Flow/Soldering Iron 4 50k ohm 10% 100ppm/C PV12p104A01 0.5W(70C) Flow/Soldering Iron 4 100k ohm 10% 100ppm/C PV12p204A01 0.5W(70C) Flow/Soldering Iron 4 200k ohm 10% 100ppm/C PV12p504A01 0.5W(70C) Flow/Soldering Iron 4 500k ohm 10% 100ppm/C PV12p105A01 0.5W(70C) Flow/Soldering Iron 4 1M ohm 10% 100ppm/C PV12p205A01 0.5W(70C) Flow/Soldering Iron 4 2M ohm 10% 100ppm/C Part Number Operating Temperature Range: -55 to 125 C The blank column is filled with the code of adjustment direction and lead type (H, P, T and S). The order quantity should be an integral multiple of the "Minimum Quantity". Construction Shaft Case "O"-Ring Gear Rotor Insert Wiper Ceramic Resistive Element Alumina Substrate Terminal Mounting Holes PV12H PV12P/PV12S (3) 2.5 5 2. 2. 5 (2) (1) (2) 2.5 (1) 2.5 (3) Tolerance:0.1 in mm Tolerance:0.1 in mm 8 PV12T 2.5 2.5 (1) 2.5 (3) (2) Tolerance:0.1 in mm 55 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please R50E13.pdf 04.6.11 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Characteristics Temperature Cycle Humidity Vibration (20G) Shock (100G) Temperature Load Life Low Temperature Exposure High Temperature Exposure Rotational Life (200 cycles) TR 2% V.S.S. 1% TR 2% IR 100Mohm min. TR 1% V.S.S. 1% TR 1% V.S.S. 1% TR 3% V.S.S. 2% TR 3% V.S.S. 1.5% TR 3% V.S.S. 1.5% TR 3% TR : Total Resistance Change V.S.S. : Voltage Setting Stability IR : Insulation Resistance 8 56 R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. PV37 Series 0.6 1.0 1.2 Marking 3-0.40.1 Dia. #1 #2 0.60.2 5.01.0 1. Smaller volume (about one-third) than 25-turns potentiometer 2. Sealed construction protects the interior from dust and liquid, which achieves stable performance. 3. Available for ultrasonic cleaning after soldering 4. Clutch mechanism prevents excessive wiper rotation. 5. 5 standard terminal styles 6. Both Top and side adjustment directions 7. To be complied with RoHS directive by new Cd free cermet resistive material. Pb free terminals with Sn plating. 1.80.2 Dia. 4.0 1.1 Features #3 6.4 #3 6.7 0.7 2.5 #2 #1 CLOCKWISE PV37P 2.5 mm (Tolerance in: 0.3 ) 2.5 1.1 6.4 1.2 Applications 5.01.0 6.7 0.6 1.0 Marking 1. Measuring instruments 2. OA equipment 3. Medical equipment 4. Power supply 5. Base station for cellular phone 1.80.2 Dia. 0.60.2 3-0.40.1 Dia. #3 #2 2.5 #2 #1 #3 CLOCKWISE 2.5 4.0 mm (Tolerancein: 0.3 ) 0.7 PV37W #1 2.5 6.4 0.6 1.0 Marking 6.7 5.01.0 0.60.2 1.80.2 Dia. 1.1 1.1 3-0.40.1 Dia. #3 #2 2.5 #1 2.5 4.0 0.7 PV37X 2.5 #2 #1 #3 CLOCKWISE 1.1 6.4 0.6 1.80.2 Dia. 1.2 1.1 mm (Tolerance in: 0.3 ) 6.4 Marking 1.0 0.60.2 #2 #1 2.0 6.7 5.01.0 #2 #1 #3 CLOCKWISE 4.0 PV37Y #3 #2 #1 2.5 2.5 #2 2.5 2.5 PV37Z #1 #3 CLOCKWISE mm (Tolerancein: 0.3 ) 4.0 #3 8 3-0.40.1 Dia. 2.0 3-0.40.1 Dia. 0.60.2 1.80.2 Dia. 5.01.0 6.7 0.6 1.0 1.1 Marking mm (Tolerancein: 0.3 ) Power Rating Soldering Method Number of Turns (Effective Rotation Angle) Total Resistance Value TCR PV37p100C01 0.25W(85C) Flow/Soldering Iron 12 10ohm 10% 150ppm/C PV37p200C01 0.25W(85C) Flow/Soldering Iron 12 20ohm 10% 150ppm/C PV37p500C01 0.25W(85C) Flow/Soldering Iron 12 50ohm 10% 150ppm/C Part Number Continued on the following page. 57 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please R50E13.pdf 04.6.11 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Power Rating Soldering Method Number of Turns (Effective Rotation Angle) Total Resistance Value TCR PV37p101C01 0.25W(85C) Flow/Soldering Iron 12 100ohm 10% 150ppm/C PV37p201C01 0.25W(85C) Flow/Soldering Iron 12 200ohm 10% 150ppm/C PV37p501C01 0.25W(85C) Flow/Soldering Iron 12 500ohm 10% 150ppm/C PV37p102C01 0.25W(85C) Flow/Soldering Iron 12 1k ohm 10% 150ppm/C PV37p202C01 0.25W(85C) Flow/Soldering Iron 12 2k ohm 10% 150ppm/C PV37p502C01 0.25W(85C) Flow/Soldering Iron 12 5k ohm 10% 150ppm/C PV37p103C01 0.25W(85C) Flow/Soldering Iron 12 10k ohm 10% 150ppm/C PV37p203C01 0.25W(85C) Flow/Soldering Iron 12 20k ohm 10% 150ppm/C PV37p253C01 0.25W(85C) Flow/Soldering Iron 12 25k ohm 10% 150ppm/C PV37p503C01 0.25W(85C) Flow/Soldering Iron 12 50k ohm 10% 150ppm/C PV37p104C01 0.25W(85C) Flow/Soldering Iron 12 100k ohm 10% 150ppm/C PV37p204C01 0.25W(85C) Flow/Soldering Iron 12 200k ohm 10% 150ppm/C PV37p254C01 0.25W(85C) Flow/Soldering Iron 12 250k ohm 10% 150ppm/C PV37p504C01 0.25W(85C) Flow/Soldering Iron 12 500k ohm 10% 150ppm/C PV37p105C01 0.25W(85C) Flow/Soldering Iron 12 1M ohm 10% 150ppm/C PV37p205C01 0.25W(85C) Flow/Soldering Iron 12 2M ohm 10% 150ppm/C PV37p100C31 0.25W(85C) Flow/Soldering Iron 12 10ohm 10% 150ppm/C PV37p200C31 0.25W(85C) Flow/Soldering Iron 12 20ohm 10% 150ppm/C PV37p500C31 0.25W(85C) Flow/Soldering Iron 12 50ohm 10% 150ppm/C PV37p101C31 0.25W(85C) Flow/Soldering Iron 12 100ohm 10% 150ppm/C PV37p201C31 0.25W(85C) Flow/Soldering Iron 12 200ohm 10% 150ppm/C PV37p501C31 0.25W(85C) Flow/Soldering Iron 12 500ohm 10% 150ppm/C PV37p102C31 0.25W(85C) Flow/Soldering Iron 12 1k ohm 10% 150ppm/C PV37p202C31 0.25W(85C) Flow/Soldering Iron 12 2k ohm 10% 150ppm/C PV37p502C31 0.25W(85C) Flow/Soldering Iron 12 5k ohm 10% 150ppm/C PV37p103C31 0.25W(85C) Flow/Soldering Iron 12 10k ohm 10% 150ppm/C PV37p203C31 0.25W(85C) Flow/Soldering Iron 12 20k ohm 10% 150ppm/C PV37p253C31 0.25W(85C) Flow/Soldering Iron 12 25k ohm 10% 150ppm/C PV37p503C31 0.25W(85C) Flow/Soldering Iron 12 50k ohm 10% 150ppm/C PV37p104C31 0.25W(85C) Flow/Soldering Iron 12 100k ohm 10% 150ppm/C PV37p204C31 0.25W(85C) Flow/Soldering Iron 12 200k ohm 10% 150ppm/C PV37p254C31 0.25W(85C) Flow/Soldering Iron 12 250k ohm 10% 150ppm/C PV37p504C31 0.25W(85C) Flow/Soldering Iron 12 500k ohm 10% 150ppm/C PV37p105C31 0.25W(85C) Flow/Soldering Iron 12 1M ohm 10% 150ppm/C PV37p205C31 0.25W(85C) Flow/Soldering Iron 12 2M ohm 10% 150ppm/C Part Number Operating Temperature Range: -55 to 125 C The blank column is filled with the code of adjustment direction and lead type (P, X, Y, W and Z). The order quantity should be an integral multiple of the "Minimum Quantity". The last three digits express the individual specification codes. C01 for standard type and C31 for radial taping type (PV37Y/PV37Z series only). 8 58 R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Power Rating (W) Soldering Method Number of Turns (Effective Rotation Angle) Total Resistance Value TCR (ppm/C) PV37p100A01 0.25(85C) Flow/Soldering Iron 12 10 ohm10% 100 PV37p200A01 0.25(85C) Flow/Soldering Iron 12 20 ohm10% 100 PV37p500A01 0.25(85C) Flow/Soldering Iron 12 50 ohm10% 100 PV37p101A01 0.25(85C) Flow/Soldering Iron 12 100 ohm10% 100 PV37p201A01 0.25(85C) Flow/Soldering Iron 12 200 ohm10% 100 PV37p501A01 0.25(85C) Flow/Soldering Iron 12 500 ohm10% 100 PV37p102A01 0.25(85C) Flow/Soldering Iron 12 1k ohm10% 100 PV37p202A01 0.25(85C) Flow/Soldering Iron 12 2k ohm10% 100 PV37p502A01 0.25(85C) Flow/Soldering Iron 12 5k ohm10% 100 PV37p103A01 0.25(85C) Flow/Soldering Iron 12 10k ohm10% 100 PV37p203A01 0.25(85C) Flow/Soldering Iron 12 20k ohm10% 100 PV37p253A01 0.25(85C) Flow/Soldering Iron 12 25k ohm10% 100 PV37p503A01 0.25(85C) Flow/Soldering Iron 12 50k ohm10% 100 PV37p104A01 0.25(85C) Flow/Soldering Iron 12 100k ohm10% 100 PV37p204A01 0.25(85C) Flow/Soldering Iron 12 200k ohm10% 100 PV37p254A01 0.25(85C) Flow/Soldering Iron 12 250k ohm10% 100 PV37p504A01 0.25(85C) Flow/Soldering Iron 12 500k ohm10% 100 PV37p105A01 0.25(85C) Flow/Soldering Iron 12 1M ohm10% 100 PV37p205A01 0.25(85C) Flow/Soldering Iron 12 2M ohm10% 100 PV37p100A31 0.25(85C) Flow/Soldering Iron 12 10 ohm10% 100 PV37p200A31 0.25(85C) Flow/Soldering Iron 12 20 ohm10% 100 PV37p500A31 0.25(85C) Flow/Soldering Iron 12 50 ohm10% 100 PV37p101A31 0.25(85C) Flow/Soldering Iron 12 100 ohm10% 100 PV37p201A31 0.25(85C) Flow/Soldering Iron 12 200 ohm10% 100 PV37p501A31 0.25(85C) Flow/Soldering Iron 12 500 ohm10% 100 PV37p102A31 0.25(85C) Flow/Soldering Iron 12 1k ohm10% 100 PV37p202A31 0.25(85C) Flow/Soldering Iron 12 2k ohm10% 100 PV37p502A31 0.25(85C) Flow/Soldering Iron 12 5k ohm10% 100 PV37p103A31 0.25(85C) Flow/Soldering Iron 12 10k ohm10% 100 PV37p203A31 0.25(85C) Flow/Soldering Iron 12 20k ohm10% 100 PV37p253A31 0.25(85C) Flow/Soldering Iron 12 25k ohm10% 100 PV37p503A31 0.25(85C) Flow/Soldering Iron 12 50k ohm10% 100 PV37p104A31 0.25(85C) Flow/Soldering Iron 12 100k ohm10% 100 PV37p204A31 0.25(85C) Flow/Soldering Iron 12 200k ohm10% 100 PV37p254A31 0.25(85C) Flow/Soldering Iron 12 250k ohm10% 100 PV37p504A31 0.25(85C) Flow/Soldering Iron 12 500k ohm10% 100 PV37p105A31 0.25(85C) Flow/Soldering Iron 12 1M ohm10% 100 PV37p205A31 0.25(85C) Flow/Soldering Iron 12 2M ohm10% 100 Part Number Remarks Non Standard Product (Cd included) Construction Gear Case 8 Adjustment Screw Terminal Wiper Cermet Resistive Element Alumina Substrate 59 R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Mounting Holes PV37P PV37W/PV37X 2.5 2.5 2.5 2.5 (1) (3) (1) 2.5 2.5 (3) (2) (2) Tolerance:0.1 in mm PV37Y/PV37Z (3) (2) 2.5 (1) 2.5 Tolerance:0.1 in mm Characteristics Temperature Cycle Humidity Vibration (20G) Shock (100G) Temperature Load Life Low Temperature Exposure High Temperature Exposure 8 Rotational Life (200 cycles) TR 1% V.S.S. 1% TR 2% IR 100Mohm min. TR 1% V.S.S. 1% TR 1% V.S.S. 1% TR 2% V.S.S. 1% TR 1% V.S.S. 1% TR 2% V.S.S. 1% TR RV100ohm ... 3% RG100ohm ... 2% TR V.S.S. IR R 60 : Total Resistance Change : Voltage Setting Stability : Insulation Resistance : Standard Total Resistance Tolerance 0.1 in mm R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. PV23 Series 0.8 4.6 0.3 4.9 0.6 1. Small size (4.6x6.4x19.1mm) and high power rating (0.75W at 70deg.C) 2. Sealed construction protects the interior from dust and liquid, which achieves stable performance. 3. Available for ultrasonic cleaning after soldering 4. Clutch mechanism prevents excessive wiper rotation. 5. To be complied with RoHS directive by new Cd free cermet resistive material. Pb free terminals with Sn plating. 6.4 1.5 2.35 Dia. 19.1 Features #2 #3 #2 3.3 12.7 #1 5.1 2.5 PV23P 5.01.0 3-0.50.1 Dia. #1 #3 CLOCKWISE mm (Tolerancein: 0.3 ) Applications 1. Measuring instruments 2. FAX 3. Copier 4. Printers 5. Sensors 4.6 0.3 4.9 0.6 0.8 #3 #2 #2 2.5 17.8 5.01.0 3-0.50.1 Dia. #1 PV23Y 6.4 1.5 2.35 Dia. 19.1 0.6 7.6 #1 #3 CLOCKWISE mm (Tolerancein: 0.3 ) Power Rating Soldering Method Number of Turns (Effective Rotation Angle) Total Resistance Value TCR PV23p100C01 0.75W(70C) Flow/Soldering Iron 15 10ohm 10% 150ppm/C PV23p200C01 0.75W(70C) Flow/Soldering Iron 15 20ohm 10% 150ppm/C PV23p500C01 0.75W(70C) Flow/Soldering Iron 15 50ohm 10% 150ppm/C PV23p101C01 0.75W(70C) Flow/Soldering Iron 15 100ohm 10% 150ppm/C PV23p201C01 0.75W(70C) Flow/Soldering Iron 15 200ohm 10% 100ppm/C PV23p501C01 0.75W(70C) Flow/Soldering Iron 15 500ohm 10% 100ppm/C PV23p102C01 0.75W(70C) Flow/Soldering Iron 15 1k ohm 10% 100ppm/C PV23p202C01 0.75W(70C) Flow/Soldering Iron 15 2k ohm 10% 100ppm/C PV23p502C01 0.75W(70C) Flow/Soldering Iron 15 5k ohm 10% 100ppm/C PV23p103C01 0.75W(70C) Flow/Soldering Iron 15 10k ohm 10% 100ppm/C PV23p203C01 0.75W(70C) Flow/Soldering Iron 15 20k ohm 10% 100ppm/C PV23p503C01 0.75W(70C) Flow/Soldering Iron 15 50k ohm 10% 100ppm/C PV23p104C01 0.75W(70C) Flow/Soldering Iron 15 100k ohm 10% 100ppm/C PV23p204C01 0.75W(70C) Flow/Soldering Iron 15 200k ohm 10% 100ppm/C PV23p504C01 0.75W(70C) Flow/Soldering Iron 15 500k ohm 10% 100ppm/C PV23p105C01 0.75W(70C) Flow/Soldering Iron 15 1M ohm 10% 100ppm/C PV23p205C01 0.75W(70C) Flow/Soldering Iron 15 2M ohm 10% 100ppm/C Part Number 8 Operating Temperature Range: -55 to 125 C The blank column is filled with the code of adjustment direction and lead type (P and Y). The order quantity should be an integral multiple of the "Minimum Quantity". 61 R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Power Rating (W) Soldering Method Number of Turns (Effective Rotation Angle) Total Resistance Value TCR (ppm/C) PV23p100A01 0.75(70C) Flow/Soldering Iron 15 10 ohm10% 100 PV23p200A01 0.75(70C) Flow/Soldering Iron 15 20 ohm10% 100 PV23p500A01 0.75(70C) Flow/Soldering Iron 15 50 ohm10% 100 PV23p101A01 0.75(70C) Flow/Soldering Iron 15 100 ohm10% 100 PV23p201A01 0.75(70C) Flow/Soldering Iron 15 200 ohm10% 100 PV23p501A01 0.75(70C) Flow/Soldering Iron 15 500 ohm10% 100 PV23p102A01 0.75(70C) Flow/Soldering Iron 15 1k ohm10% 100 PV23p202A01 0.75(70C) Flow/Soldering Iron 15 2k ohm10% 100 Non Standard PV23p502A01 0.75(70C) Flow/Soldering Iron 15 5k ohm10% 100 Product PV23p103A01 0.75(70C) Flow/Soldering Iron 15 10k ohm10% 100 (Cd included) PV23p203A01 0.75(70C) Flow/Soldering Iron 15 20k ohm10% 100 PV23p503A01 0.75(70C) Flow/Soldering Iron 15 50k ohm10% 100 PV23p104A01 0.75(70C) Flow/Soldering Iron 15 100k ohm10% 100 PV23p204A01 0.75(70C) Flow/Soldering Iron 15 200k ohm10% 100 PV23p504A01 0.75(70C) Flow/Soldering Iron 15 500k ohm10% 100 PV23p105A01 0.75(70C) Flow/Soldering Iron 15 1M ohm10% 100 PV23p205A01 0.75(70C) Flow/Soldering Iron 15 2M ohm10% 100 Part Number Remarks Construction Post Adjustment Screw Case Terminal Alumina Substrate Wiper Cermet Resistive Element Mounting Holes PV23P PV23Y 12.7 17.8 7.6 (3) (1) (3) (1) 2.5 2.5 5.1 (2) (2) 8 Tolerance:0.1 in mm 62 Tolerance:0.1 in mm catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please R50E13.pdf 04.6.11 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Characteristics Temperature Cycle Humidity Vibration (20G) Shock (50G) Temperature Load Life Low Temperature Exposure High Temperature Exposure Rotational Life (200 cycles) TR 2% V.S.S. 1% TR 2% IR 100Mohm min. TR 1% V.S.S. 1% TR 1% V.S.S. 1% TR 3% V.S.S. 1% TR 1% V.S.S. 1% TR 2% V.S.S. 1% TR 3% TR : Total Resistance Change V.S.S. : Voltage Setting Stability IR : Insulation Resistance 8 63 R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. 31.8 3.20.2 25.40.2 152 min. 1.7 5.0 4.6 0.60.2 1. High power rating (1W at 70 deg.C) 2. Sealed construction protects the interior from dust and liquid, which achieves stable performance. 3. Available for ultrasonic cleaning after soldering 4. Clutch mechanism prevents excessive wiper rotation. 5. To be complied with RoHS directive by new Cd free cermet resistive material. Pb free terminals with Sn plating. 0.80.2 #1(Yellow) 4.70.2 Mounting holes 2-2.50.2 Dia. 6.0 6.0 #2 #2 (Red) #1 mm (Tolerancein: 0.3 ) Applications 0.60.2 3.00.2 Dia. 31.8 3.20.2 25.40.2 5.0 4.6 1.7 7.01.0 8.00.4 1. Measuring instruments 2. FAX 3. Copier 4. Printers 5. Sensors #3 CLOCKWISE #3(Green) 1.9 0.80.2 6.0 4.70.2 #2 #1 #3 Mounting holes 2-2.50.2 Dia. 3-0.70.1 Dia. 6.0 #2 #1 #3 CLOCKWISE 17.8 6.6 mm (Tolerance in: 0.3 ) 31.8 0.60.2 3.00.2 Dia. 22.9 3.20.2 25.40.2 5.0 4.6 1.7 1.9 PV22S 7.01.0 8.00.4 PV22L Insulated standard wire 0.80.2 #2 #1 #3 CLOCKWISE PV22Y 7.6 6.6 17.8 8 3-0.70.1 Dia. 6.0 2.5 6.0 4.70.2 #1 #2 #3 Mounting holes 2-2.50.2 Dia. mm (Tolerancein: 0.3 ) Power Rating Soldering Method Number of Turns (Effective Rotation Angle) Total Resistance Value TCR PV22p100C01 1.0W(70C) Flow/Soldering Iron 22 10ohm 10% 100ppm/C PV22p200C01 1.0W(70C) Flow/Soldering Iron 22 20ohm 10% 100ppm/C PV22p500C01 1.0W(70C) Flow/Soldering Iron 22 50ohm 10% 100ppm/C PV22p101C01 1.0W(70C) Flow/Soldering Iron 22 100ohm 10% 100ppm/C PV22p201C01 1.0W(70C) Flow/Soldering Iron 22 200ohm 10% 100ppm/C PV22p501C01 1.0W(70C) Flow/Soldering Iron 22 500ohm 10% 100ppm/C PV22p102C01 1.0W(70C) Flow/Soldering Iron 22 1k ohm 10% 100ppm/C PV22p202C01 1.0W(70C) Flow/Soldering Iron 22 2k ohm 10% 100ppm/C PV22p502C01 1.0W(70C) Flow/Soldering Iron 22 5k ohm 10% 100ppm/C PV22p103C01 1.0W(70C) Flow/Soldering Iron 22 10k ohm 10% 100ppm/C PV22p203C01 1.0W(70C) Flow/Soldering Iron 22 20k ohm 10% 100ppm/C PV22p503C01 1.0W(70C) Flow/Soldering Iron 22 50k ohm 10% 100ppm/C PV22p104C01 1.0W(70C) Flow/Soldering Iron 22 100k ohm 10% 100ppm/C PV22p204C01 1.0W(70C) Flow/Soldering Iron 22 200k ohm 10% 100ppm/C PV22p504C01 1.0W(70C) Flow/Soldering Iron 22 500k ohm 10% 100ppm/C PV22p105C01 1.0W(70C) Flow/Soldering Iron 22 1M ohm 10% 100ppm/C Part Number Continued on the following page. 64 8.00.4 Features 0.60.2 3.00.2 Dia. 1.9 PV22 Series R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Part Number PV22p205C01 Power Rating Soldering Method Number of Turns (Effective Rotation Angle) Total Resistance Value TCR 1.0W(70C) Flow/Soldering Iron 22 2M ohm 10% 100ppm/C Operating Temperature Range: -55 to 150 C The blank column is filled with the code of adjustment direction and lead type (L, S and Y). The order quantity should be an integral multiple of the "Minimum Quantity". Power Rating (W) Soldering Method Number of Turns (Effective Rotation Angle) Total Resistance Value TCR (ppm/C) PV22p100A01 1.0(70C) Flow/Soldering Iron 22 10 ohm10% 100 PV22p200A01 1.0(70C) Flow/Soldering Iron 22 20 ohm10% 100 PV22p500A01 1.0(70C) Flow/Soldering Iron 22 50 ohm10% 100 PV22p101A01 1.0(70C) Flow/Soldering Iron 22 100 ohm10% 100 PV22p201A01 1.0(70C) Flow/Soldering Iron 22 200 ohm10% 100 PV22p501A01 1.0(70C) Flow/Soldering Iron 22 500 ohm10% 100 PV22p102A01 1.0(70C) Flow/Soldering Iron 22 1k ohm10% 100 PV22p202A01 1.0(70C) Flow/Soldering Iron 22 2k ohm10% 100 PV22p502A01 1.0(70C) Flow/Soldering Iron 22 5k ohm10% 100 Product PV22p103A01 1.0(70C) Flow/Soldering Iron 22 10k ohm10% 100 (Cd included) PV22p203A01 1.0(70C) Flow/Soldering Iron 22 20k ohm10% 100 PV22p503A01 1.0(70C) Flow/Soldering Iron 22 50k ohm10% 100 PV22p104A01 1.0(70C) Flow/Soldering Iron 22 100k ohm10% 100 PV22p204A01 1.0(70C) Flow/Soldering Iron 22 200k ohm10% 100 PV22p504A01 1.0(70C) Flow/Soldering Iron 22 500k ohm10% 100 PV22p105A01 1.0(70C) Flow/Soldering Iron 22 1M ohm10% 100 PV22p205A01 1.0(70C) Flow/Soldering Iron 22 2M ohm10% 100 Part Number Remarks Non Standard Construction Adjustment Screw Post Alumina Substrate Case Cermet Resistive Element Wiper Terminal Mounting Holes PV22S PV22Y 17.8 8 17.8 7.6 (1) (3) (3) (1) 22.9 2.5 (2) (2) Tolerance:0.1 in mm Tolerance:0.1 in mm Continued on the following page. 65 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please R50E13.pdf 04.6.11 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Characteristics Temperature Cycle Humidity Vibration (20G) Shock (50G) Temperature Load Life Low Temperature Exposure High Temperature Exposure Rotational Life (200 cycles) TR 2% V.S.S. 1% TR 2% IR 100Mohm min. TR 1% V.S.S. 1% TR 1% V.S.S. 1% TR 3% V.S.S. 1% TR 1% V.S.S. 1% TR 2% V.S.S. 1% TR 2% TR : Total Resistance Change V.S.S. : Voltage Setting Stability IR : Insulation Resistance 8 66 R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. PV36 Series 1.3 Features 2.0 Dia. 0.6 5.0 6.01.0 1.2 1. High resolution 25-turns enables precision adjustment easily. 2. Sealed construction protects the interior from dust and liquid, which achieves stable performance. 3. Available for ultrasonic cleaning after soldering 4. Clutch mechanism prevents excessive wiper rotation. 5. 5 standard terminal styles 6. Both Top and side adjustment directions. 7. To be complied with RoHS directive by new Cd free cermet resistive material. Pb free terminals with Sn plating. Marking 0.7 1.3 3-0.50.1 Dia. #1 #2 #3 9.6 #1 #3 Clockwise 0.5 PV36P 10.0 5.2 2.5 #2 (Wiper) (in mm) (Tolerance : 0.3) 2.5 2.5 1.2 2.0 Dia. 9.6 Applications 0.6 1.3 Marking 6.01.0 0.5 10.0 0.7 1.3 1. Measuring instruments 2. OA equipment 3. Medical equipment 4. Power supply 5. Base station for cellular phone 3-0.50.1 Dia. #3 #2 #1 #2 (Wiper) 2.5 2.5 #1 2.5 5.0 PV36W #3 Clockwise (in mm) (Tolerance : 0.3) 9.6 0.7 1.3 Marking 6.01.0 10.0 2.0 Dia. 0.6 0.5 1.3 1.2 3-0.50.1 Dia. #3 #2 #1 2.5 2.5 #2 (Wiper) #3 2.5 Clockwise 5.0 #1 PV36X (in mm) (Tolerance : 0.3) 9.6 1.2 9.6 2.0 Dia. 0.6 1.3 0.7 1.3 1.2 #3 #2 #1 #2 (Wiper) 1.2 PV36Z (in mm) (Tolerance : 0.3) #3 Clockwise (in mm) (Tolerance : 0.3) 5.0 #1 Clockwise 2.5 #3 1.2 2.5 5.0 2.5 2.5 #2 (Wiper) #1 PV36Y Power Rating Soldering Method Number of Turns (Effective Rotation Angle) Total Resistance Value TCR PV36p100C01 0.5W(70C) Flow/Soldering Iron 25 10ohm 10% 150ppm/C PV36p200C01 0.5W(70C) Flow/Soldering Iron 25 20ohm 10% 150ppm/C PV36p500C01 0.5W(70C) Flow/Soldering Iron 25 50ohm 10% 150ppm/C Part Number 8 6.01.0 3-0.50.1 Dia. #3 #2 #1 2.5 2.5 10.0 2.0 Dia. 0.6 0.5 0.7 1.3 10.0 6.01.0 0.5 3-0.50.1 Dia. Marking 1.3 Marking Continued on the following page. 67 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please R50E13.pdf 04.6.11 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Power Rating Soldering Method Number of Turns (Effective Rotation Angle) Total Resistance Value TCR PV36p101C01 0.5W(70C) Flow/Soldering Iron 25 100ohm 10% 150ppm/C PV36p201C01 0.5W(70C) Flow/Soldering Iron 25 200ohm 10% 100ppm/C PV36p501C01 0.5W(70C) Flow/Soldering Iron 25 500ohm 10% 100ppm/C PV36p102C01 0.5W(70C) Flow/Soldering Iron 25 1k ohm 10% 100ppm/C PV36p202C01 0.5W(70C) Flow/Soldering Iron 25 2k ohm 10% 100ppm/C PV36p502C01 0.5W(70C) Flow/Soldering Iron 25 5k ohm 10% 100ppm/C PV36p103C01 0.5W(70C) Flow/Soldering Iron 25 10k ohm 10% 100ppm/C PV36p203C01 0.5W(70C) Flow/Soldering Iron 25 20k ohm 10% 100ppm/C PV36p253C01 0.5W(70C) Flow/Soldering Iron 25 25k ohm 10% 100ppm/C PV36p503C01 0.5W(70C) Flow/Soldering Iron 25 50k ohm 10% 100ppm/C PV36p104C01 0.5W(70C) Flow/Soldering Iron 25 100k ohm 10% 100ppm/C PV36p204C01 0.5W(70C) Flow/Soldering Iron 25 200k ohm 10% 100ppm/C PV36p254C01 0.5W(70C) Flow/Soldering Iron 25 250k ohm 10% 100ppm/C PV36p504C01 0.5W(70C) Flow/Soldering Iron 25 500k ohm 10% 100ppm/C PV36p105C01 0.5W(70C) Flow/Soldering Iron 25 1M ohm 10% 100ppm/C PV36p205C01 0.5W(70C) Flow/Soldering Iron 25 2M ohm 10% 100ppm/C PV36p100C31 0.5W(70C) Flow/Soldering Iron 25 10ohm 10% 150ppm/C PV36p200C31 0.5W(70C) Flow/Soldering Iron 25 20ohm 10% 150ppm/C PV36p500C31 0.5W(70C) Flow/Soldering Iron 25 50ohm 10% 150ppm/C PV36p101C31 0.5W(70C) Flow/Soldering Iron 25 100ohm 10% 150ppm/C PV36p201C31 0.5W(70C) Flow/Soldering Iron 25 200ohm 10% 100ppm/C PV36p501C31 0.5W(70C) Flow/Soldering Iron 25 500ohm 10% 100ppm/C PV36p102C31 0.5W(70C) Flow/Soldering Iron 25 1k ohm 10% 100ppm/C PV36p202C31 0.5W(70C) Flow/Soldering Iron 25 2k ohm 10% 100ppm/C PV36p502C31 0.5W(70C) Flow/Soldering Iron 25 5k ohm 10% 100ppm/C PV36p103C31 0.5W(70C) Flow/Soldering Iron 25 10k ohm 10% 100ppm/C PV36p203C31 0.5W(70C) Flow/Soldering Iron 25 20k ohm 10% 100ppm/C PV36p253C31 0.5W(70C) Flow/Soldering Iron 25 25k ohm 10% 100ppm/C PV36p503C31 0.5W(70C) Flow/Soldering Iron 25 50k ohm 10% 100ppm/C PV36p104C31 0.5W(70C) Flow/Soldering Iron 25 100k ohm 10% 100ppm/C PV36p204C31 0.5W(70C) Flow/Soldering Iron 25 200k ohm 10% 100ppm/C PV36p254C31 0.5W(70C) Flow/Soldering Iron 25 250k ohm 10% 100ppm/C PV36p504C31 0.5W(70C) Flow/Soldering Iron 25 500k ohm 10% 100ppm/C PV36p105C31 0.5W(70C) Flow/Soldering Iron 25 1M ohm 10% 100ppm/C PV36p205C31 0.5W(70C) Flow/Soldering Iron 25 2M ohm 10% 100ppm/C Part Number Operating Temperature Range: -55 to 125 C The blank column is filled with the code of adjustment direction and lead type (P, X, Y, W and Z). The order quantity should be an integral multiple of the "Minimum Quantity". The last three digits express the individual specification codes. C01 for standard type and C31 for radial taping type (PV36W/PV36X series only). 8 68 R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Power Rating (W) Soldering Method Number of Turns (Effective Rotation Angle) Total Resistance Value TCR (ppm/C) PV36p100A01 0.5(70C) Flow/Soldering Iron 25 10 ohm10% 100 PV36p200A01 0.5(70C) Flow/Soldering Iron 25 20 ohm10% 100 PV36p500A01 0.5(70C) Flow/Soldering Iron 25 50 ohm10% 100 PV36p101A01 0.5(70C) Flow/Soldering Iron 25 100 ohm10% 100 PV36p201A01 0.5(70C) Flow/Soldering Iron 25 200 ohm10% 100 PV36p501A01 0.5(70C) Flow/Soldering Iron 25 500 ohm10% 100 PV36p102A01 0.5(70C) Flow/Soldering Iron 25 1k ohm10% 100 PV36p202A01 0.5(70C) Flow/Soldering Iron 25 2k ohm10% 100 PV36p502A01 0.5(70C) Flow/Soldering Iron 25 5k ohm10% 100 PV36p103A01 0.5(70C) Flow/Soldering Iron 25 10k ohm10% 100 PV36p203A01 0.5(70C) Flow/Soldering Iron 25 20k ohm10% 100 PV36p253A01 0.5(70C) Flow/Soldering Iron 25 25k ohm10% 100 PV36p503A01 0.5(70C) Flow/Soldering Iron 25 50k ohm10% 100 PV36p104A01 0.5(70C) Flow/Soldering Iron 25 100k ohm10% 100 PV36p204A01 0.5(70C) Flow/Soldering Iron 25 200k ohm10% 100 PV36p254A01 0.5(70C) Flow/Soldering Iron 25 250k ohm10% 100 PV36p504A01 0.5(70C) Flow/Soldering Iron 25 500k ohm10% 100 PV36p105A01 0.5(70C) Flow/Soldering Iron 25 1M ohm10% 100 PV36p205A01 0.5(70C) Flow/Soldering Iron 25 2M ohm10% 100 PV36p100A31 0.5(70C) Flow/Soldering Iron 25 10 ohm10% 100 PV36p200A31 0.5(70C) Flow/Soldering Iron 25 20 ohm10% 100 PV36p500A31 0.5(70C) Flow/Soldering Iron 25 50 ohm10% 100 PV36p101A31 0.5(70C) Flow/Soldering Iron 25 100 ohm10% 100 PV36p201A31 0.5(70C) Flow/Soldering Iron 25 200 ohm10% 100 PV36p501A31 0.5(70C) Flow/Soldering Iron 25 500 ohm10% 100 PV36p102A31 0.5(70C) Flow/Soldering Iron 25 1k ohm10% 100 PV36p202A31 0.5(70C) Flow/Soldering Iron 25 2k ohm10% 100 PV36p502A31 0.5(70C) Flow/Soldering Iron 25 5k ohm10% 100 PV36p103A31 0.5(70C) Flow/Soldering Iron 25 10k ohm10% 100 PV36p203A31 0.5(70C) Flow/Soldering Iron 25 20k ohm10% 100 PV36p253A31 0.5(70C) Flow/Soldering Iron 25 25k ohm10% 100 PV36p503A31 0.5(70C) Flow/Soldering Iron 25 50k ohm10% 100 PV36p104A31 0.5(70C) Flow/Soldering Iron 25 100k ohm10% 100 PV36p204A31 0.5(70C) Flow/Soldering Iron 25 200k ohm10% 100 PV36p254A31 0.5(70C) Flow/Soldering Iron 25 250k ohm10% 100 PV36p504A31 0.5(70C) Flow/Soldering Iron 25 500k ohm10% 100 PV36p105A31 0.5(70C) Flow/Soldering Iron 25 1M ohm10% 100 PV36p205A31 0.5(70C) Flow/Soldering Iron 25 2M ohm10% 100 Part Number Remarks Non Standard Product (Cd included) Construction Adjustment Screw Terminal 8 Case Alumina Substrate Wiper Cermet Resistive Element Gear 69 R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Mounting Holes PV36P 2.5 PV36W/X 2.5 (3) (1) (2) (1) 2.5 (3) (2) 2.5 Tolerance:0.1 in mm PV36Y/Z 2.5 2.5 (1) 2.5 (3) (2) Tolerance 0.1 in mm Characteristics Temperature Cycle Humidity Vibration (20G) Shock (100G) Temperature Load Life Low Temperature Exposure High Temperature Exposure 8 Rotational Life (200 cycles) TR 2% V.S.S. 1% TR 2% IR 100Mohm min. TR 1% V.S.S. 1% TR 1% V.S.S. 1% TR 3% V.S.S. 1% TR 2% V.S.S. 1% TR 3% V.S.S. 1% TR RV1kohm, RU500kohm ... 5% 1kohmFRF500kohm ... 3% TR V.S.S. IR R 70 : Total Resistance Change : Voltage Setting Stability : Insulation Resistance : Standard Total Resistance 2.5 Tolerance:0.1 in mm catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please R50E13.pdf 04.6.11 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. PV12/PV37/PV23/PV22/PV36 Series Notice Notice (Operating and Storage Conditions) 1. Store in temperatures of -10 to +40 deg. C and relative humidity of 30-85%RH. 2. Do not store in or near corrosive gases. 3. Use within six months after delivery. 4. Open the package just before using. 5. Do not store under direct sunlight. 6. If you use the trimmer potentiometer in an environment other than listed below, please consult with a Murata factory representative prior to using. The trimmer potentiometer should not be used under the following environmental conditions: (1) Corrosive gaseous atmosphere (Ex. Chlorine gas, Hydrogen sulfide gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.) (2) In liquid (Ex. Oil, Medical liquid, Organic solvent, etc.) (3) Dusty / dirty atmosphere (4) Direct sunlight (5) Static voltage nor electric/magnetic fields (6) Direct sea breeze (7) Other variations of the above Notice (Rating) 1. When using with partial load (rheostat), minimize the power depending on the resistance value. 2. The maximum input voltage to a trimmer potentiometer should not exceed (P.R)^1/2 or the maximum operating voltage, whichever is smaller. 3. The maximum input current to a trimmer potentiometer should not exceed (P/R)^1/2 or the allowable wiper current, whichever is smaller. Notice (Soldering and Mounting) 1. Soldering (1) Standard soldering condition (a) Flow soldering : >Pre-heating temp. 80-100 deg. C >Soldering temp. 260 deg. C max. >Soldering time 3 sec. max. (b) Soldering iron : >Temperature of tip 300 deg. C max. >Soldering time 3 sec. max. >Wattage of iron 40W max. Before using other soldering conditions than those listed above, please consult with Murata factory representative prior to using. If the soldering conditions are not suitable, e.g., excessive time and/or excessive temperature, the trimmer potentiometer may deviate from the specified characteristics. (2) To minimize mechanical stress when adjusting, the trimmer potentiometer should be mounted onto PCB without gap. (3) The soldering iron should not come in contact with the case of the trimmer potentiometer. If such contact does occur, the trimmer potentiometer may be damaged. 2. Mounting (1) Use PCB hole to meet the pin of the trimmer potentiometer. If the trimmer potentiometer installs into insufficient PCB hole, the trimmer potentimeter may be damaged by mechanical stress. (2) Do not apply excessive force (preferably 9.8N (Ref.; 1kgf) max.), when the trimmer potentiometer is mounted to the PCB. 3. Cleaning (1) Isopropyl-alcohol and Ethyl-alcohol are applicable solvents for cleaning. If you use any other types of solvents, please consult with a Murata factory representative prior to using. (2) The total cleaning time by cold dipping, vapor and ultrasonic washing (conditions as below) method should be less than 3 minutes. (3) For ultra-sonic cleaning, the available condition is as follows. >Power: 600W (67 liter) max. >Frequency: 28kHz >Temperature: Ambient temperature Due to the ultra-sonic cleaning equipment's peculiar self-resonance point and that the cleaning compatibility usually depends on the jig construction and/or the cleaning condition such as the depth of immersion, please check the cleaning equipment to determine the suitable conditions. If the trimmer potentiometer is cleaned by other conditions, the trimmer potentiometer may be damaged. 8 71 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please R50E13.pdf 04.6.11 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. PV12/PV37/PV23/PV22/PV36 Series Notice Notice (Handling) 1. Use suitable screwdrivers that fit comfortably in driver slot. We recommend the screwdrivers below. * Recommended screwdriver for manual adjustment ENGINEER INC. : DA-40 (Murata P/N : KMDR180) We can supply the screwdrivers above. If you place order, please specify the Murata P/N. 2. Don't apply more than 9.8N (Ref.; 1kgf) of twist and stress after mounting onto PCB to prevent contact intermittence. If excessive force is Notice (Other) 1. Please make sure that your product has been evaluated and confirmed against your specifications when our product is mounted to your product. 2. Murata cannot guarantee trimmer potentiometer integrity when used under conditions other than those specified in this document. 8 72 applied, the trimmer potentiometer may not function. 3. When adjusting with an adjustment tool, the applied force to the adjustment screw should not exceed 4.9N (Ref.; 500gf). If excessive force is applied, the trimmer potentiometer may not function due to damage. 4. When using a lock paint to fix slot position, please use adhesive resin without chlorine or sulfur (Three-bond "1401 series"). R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. SMD Sealed Type/Lead Sealed Type Specifications and Test Methods Specifications and Test Methods The following describes trimmer potentiometer testing conducted by Murata Manufacturing Co., Ltd. in accordance with MIL-R-22097 (Military specification for variable resistors, non-wirewound) and MIL-STD-202 (Test methods for electronic and electrical component parts). No. Item Test Methods Measure total resistance between the resistance element and terminals (#1 and #3) with the contact arm positioned against a stop. The positioning of the contact arm and terminal should be the same for subsequent total resistance measurements on the same device. Use the test voltage specified in Table 1 for total resistance measurements. This voltage should be used for all subsequent total resistance measurements. 1 Total Resistance Total Resistance, Nominal (ohm) 10VRV100 100FRV1k 1kFRV10k 10kFRV100k 100kFR Maximum Test Voltage (V) 1.0 3.0 10.0 30.0 100.0 Table 1: Total resistance test voltage 2 Residual Resistance Position the contact arm at the extreme counterclockwise limit of mechanical travel and measure the resistance between the contact arm and the corresponding end terminal. Then, position the contact arm at the extreme clockwise limit of mechanical travel and measure the resistance between the contact arm and the corresponding end terminal. During this test, take suitable precautions to ensure that the rated current of the resistance element is not exceeded. Contact resistance variation should be measured with the measuring circuit shown in Figure 1, or its equivalent. The adjustment rotor (screw) should be rotated in both directions through 90% of the actual effective-electrical rotational angle (number of turns) for a total of 6 cycles. Only the last 3 cycles should count in determining whether or not a contact resistance variation is observed at least twice in the same location, exclusive of the roll-on or roll-off points where the contact arm moves from the termination, on or off, the resistance element. The rate of rotation of the adjustment rotor (screw) should be such that the adjustment rotor (screw) completes 1 cycle for 5 seconds minimum to 2 minutes maximum. The test current used should follow the value given in Table 2 unless otherwise limited by power rating. 3 Contact Resistance Variation Standard Total Resistance R (ohm) RV100 100FRF500 500VRF1k 1kVRF2k 2kVRF50k 50kVRF200k 200kVRF1M 1MVRF2M 2MVR Test Current 20mA 10mA 4mA 2mA 1mA 200A 100A 50A 30A Rx #1 Oscilloscope #3 #2 Constant Current Source (Test current shown in Table2) Proofread Resistance AC Amplifier Rx : Trimmer Potentiometer Oscilloscope bandwidth :100Hz to 50kHz Figure 1: CRV measuring circuit Table 2: Test current for CRV The trimmer potentiometer should be subjected to each of the following temperatures (see Table 3) for 30-45 minutes. Temperature coefficient of resistance should be applied to the following formula. R2 - R1 TCR= R1 (T2 - T1) Z 106 (ppm/C) 4 Temperature Coefficient of Resistance T1 T2 R1 R2 : Reference temperature in degrees celsius : Test temperature in degrees celsius : Resistance at reference temperature ohm : Resistance at test temperature in ohm Sequence 1* 2 Temperature (C) +25 -15 3 Min. operating Temperature 4* 5 +25 +65 6 Max. operating Temperature Note*: Reference temperature Table 3: Test temperatures The wiper should be set at approximately 40% of the actual effective-electrical rotational angle (number of turns). An adequate DC test potential should be applied between terminal #1 and terminal #3. The voltage between terminal #1 and terminal #3, and the voltage between terminal #1 and terminal #2, should be measured and applied to the following formula. E 5 Voltage Setting Stability Voltage setting stability= 9 ( e'E - Ee ) Z100 (%) e : Before test (The voltage between terminal #1 and terminal #2) e': After test (The voltage between terminal #1 and terminal #2) E : The voltage between terminal #1 and terminal #3 #1 #3 #2 e Figure 2 Continued on the following page. 1 79 R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. SMD Sealed Type/Lead Type Specifications and Test Methods Specifications and TestSealed Methods Continued from the preceding page. No. Item Test Methods The trimmer potentiometer should be subjected to Table 4 temperature for 5 cycles. The trimmer potentiometer should be removed from the chamber, and maintained at a temperature of 255C for 1~2 hours. 6 Temperature Cycle 1 Sequence PV-- series Temp. -553 PV22 series (C) PVF2 series -253 Time (min.) 30 2 3 4 +1253 +252 +1503 +252 +603 30 5 max. 5 max. Table 4: One cycle of temperature cycle. 1) PVC6, PV12, PV32, PV34 PVM4A---D01 series The trimmer potentiometer should be placed in a chamber at a temperature of 402C and a humidity of 90~95% without loading for 2508 hours (50012 hours for PVM4A---D01 series). The trimmer potentiometer should be removed from the chamber, and maintained at a temperature of 255C for 51/6 hours. 2) PVF2 series The trimmer potentiometer should be placed in a chamber at 602C and 90~95% without loading for 100012 hours. The trimmer potentiometer should be removed from the chamber, and maintained at a temperature of 255C for 51/6 hours 2) PVG3, PVG5, PV01, PV22, PV23, PV36, PV37 series The trimmer potentiometer should be subjected Figure-3 the programmed humidity environment for 10 cycle. The trimmer potentiometer should be removed from the chamber, and maintained at a temperature of 255C for 1.51/2 hours. MIL-STD-202 METHOD 106 80-98%RH 70 65 60 55 Humidity 45 40 90-98%RH 90-98%RH 24 HOURS RATE OF CHANGE OF TEMPERATURE IS UNSPECIFIED. HOWEVER, SPECIMENS SHOULD NOT BE SUBJECTED TO RADIANT HEAT FROM CHAMBER-CONDITIONING PROCESSES 50 TEMPERATURE (DEGREES CELSIUS) 7 80-98%RH 90-98%RH INITIAL CONDITIONING IN A DRY OVEN HUMIDITY UNCONTROLLED 35 30 +10C -2C CIRCULATION OF CONDITIONING AIR SHOULD BE AT A MINIMUM CUBIC RATE PER MINUTE EQUIVALENT TO 5 TIMES THE VOLUME OF THE CHAMBER 25 20 15 INITIAL MEASUREMENTS AS SPECIFIED IN 3.2 10 5 0 -5 -10 END OF FINAL CYCLE MEASUREMENTS AS SPECIFIED IN 3.6 VOLTAGE APPLIED AS SPECIFIED IN 3.5 UNLESS OTHERWISE SPECIFIED TEMPERATURE TOLERANCE IS, 2C AT ALL POINTS WITHIN THE CHAMBER EXCEPT THE IMMEDIATE VICINITY OF THE SPECIMENS AND THE CHAMBER SURFACES PRIOR TO FIRST CYCLE STEP 1 UNLESS OTHERWISE SPECIFIED STEPS 7a AND 7b PERFORMED DURING ANY 5 OF THE FIRST 9 CYCLES. HUMIDITY UNCONTROLLED DURING STEPS 7a AND 7b ONLY STEP 2 STEP 3 STEP 4 STEP 5 STEP 6 STEP 7b STEP 7a STEP 7 ONE CYCLE 24 HOURS. REPEAT AS SPECIFIED IN 3.3 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Figure 3 Vibration 1) PV-- series The trimmer potentiometer should be vibrated throughout the frequency range at the 20G level. A complete frequency range, 10Hz to 2000Hz and back, should be made within 15 minutes for a total of 4 sweeps in each of the three axis direction for a total of 12 sweeps. 2) PVF2 series The trimmer potentiometer should be subjected to vibration at 0.3 inch amplitude. The frequency should be varied uniformly between the approximate limits of 10Hz and 55Hz. This motion should be applied for period of 2 hours in each of 3 mutually perpendicular directions (total of 6 hours). 9 Shock 1) PV-- series The trimmer potentiometer should be shocked at the 100G (50G for PV22 and PV23 series) level and should be subjected to 4 shocks in each of the three axis directions for a total of 12 shocks. 2) PVM4A---D01 series The trimmer potentiometer should be shocked at the 100G level and should be subjected to 3 shocks in each of the six axis directions for a total of 18 shocks. 10 Temperature Road Life Full rated continuous working voltage not exceeding the maximum rated voltage should be applied intermittently between terminal #1 and terminal #3 of the trimmer potentiometer, 1.5 hours on and 0.5 hours off, for a total of 100012 hours, at a temperature of 702C (852C for PV01 and PV37 series, 502C for PVF2 series). The trimmer potentiometer should be removed from the chamber, and maintained at a temperature of 255C for 1 to 2 hours. 11 High Temperature Exposure (Except for PVF2) The trimmer potentiometer should be placed in a chamber at a temperature of 1253C (1503C for PV22 series) 2508 hours without loading. The trimmer potentiometer should be removed from the chamber, and maintained at a temperature of 255C for 1 to 2 hours. 12 Low Temperature Exposure (Except for PVF2 and PVM4A---D01) The trimmer potentiometer should be placed in a chamber at a temperature of -553C for 1 hours without loading. Full rated continuous working voltage not exceeding the maximum rated voltage should be applied for 45 minutes. The trimmer potentiometer should be removed from the chamber, and maintained at a temperature of 255C for approximately 24 hours. 8 9 Continued on the following page. 80 1 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please R50E13.pdf 04.6.11 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. SMD Sealed Type/Lead Sealed Type Specifications and Test Methods Specifications and Test Methods Continued from the preceding page. No. 13 Item Low Temperature Operation (Only for PVF2 and PVM4A---D01) Test Methods The trimmer potentiometer should be placed in a chamber at a temperature of -253C (-553C for PVM4A--D01 series) 484 hours without loading. The trimmer potentiometer should be removed from the chamber, and maintained at a temperature of 255C for 1-2 hours 1)PV-- series Full rated continuous working voltage not exceeding the maximum rated voltage should be applied with the circuit shown in the figure. The adjustment rotor (screw) should be continuously cycled through not less than 90% of effective-electrical rotational angle (number of turns), at the rate of 1 cycle for 5 seconds minimum to 2.5 minutes maximum for total of 200 cycles. End Terminal Resistor 1 End Terminal 14 End Terminal Resistor 2 End Terminal Rotational Life DC supply Figure 4 2) PVG3, PVG5 series The adjustment rotor (screw) should be continuously cycled though not less than 90% of effective-electrical rotational angle (number of turns), at the rate of 1 cycle for 5 seconds minimum to 2.5 minutes maximum for a total of 50 (100 for PVG5) cycles, without loading. 3) PVF2, PVM4A---D01 series The wiper should be rotated over 90% of the effective rotational angle without loading at a speed of 10 cycles per minute, for 100 cycles continuously. 9 81