PV36W103C01B00 - Murata Manufacturing Co., Ltd.

54

8

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Trimmer Potentiometers

Lead Sealed Type Multi-turns PV12/PV37/PV23/PV22/PV36 Series

PV12 Series

■ Features

1. The unique inner gear system recognizes the

position of the center of the shaft of the

potentiometer.

2. Sealed construction protects the interior from dust

and liquid, which achieves stable performance.

3. Available for ultrasonic cleaning after soldering

4. Clutch mechanism prevents excessive wiper rotation.

■ Applications

1. HDTVs 2. Professional cameras

3. CATV 4. FAX

5. Printers 6. Sensors

7. Switching power supplies

#2

#1 #3

CLOCKWISE

#1

#2

#3

0.6±0.1

0.7±0.1 Depth

2.5±0.1

7.6±0.1 Dia.

6.6±0.1 7.0±1.0

0.5

3−0.5±0.1 Dia.

0.4±0.1

90°±6°

2.5±0.2

in mm

(

Tolerance : ±0.3

)

PV12H

#2

#1 #3

CLOCKWISE

#1

#2

#3

0.6±0.1

0.7±0.1 Depth

2.5±0.1

7.6±0.1 Dia.

6.6±0.1 7.0±1.0

0.5

3−0.5±0.1 Dia.

2.5

2.5 2.5

in mm

(

Tolerance : ±0.3

)

PV12P

#2

#1 #3

CLOCKWISE

#1 #2 #3

7.6±0.3

0.6±0.1

9.0±0.3

5.1±0.3

7.7±0.3

6.3±0.3

3−0.5±0.1 Dia.

7.0±1.0 0.5 2.5±0.1

3.6

2.5

2.5 2.5

0.7±0.1 Depth

in mm

(

Tolerance : ±0.3

)

PV12S

#2

#1 #3

CLOCKWISE

#1 #2 #3

7.6±0.3

0.6±0.1

9.0±0.3

5.1±0.3

7.7±0.3

6.3±0.3

3−0.5±0.1 Dia.

7.0±1.0 0.5 2.5±0.1

3.6

2.5

2.5 2.5

0.7±0.1 Depth

in mm

(

Tolerance : ±0.3

)

PV12T

Part Number Power Rating Soldering Method Number of Turns

(Effective Rotation Angle) Total Resistance Value TCR

PV12p100A01 0.5W(70°C) Flow/Soldering Iron 4 10ohm ±10% ±100ppm/°C

PV12p200A01 0.5W(70°C) Flow/Soldering Iron 4 20ohm ±10% ±100ppm/°C

PV12p500A01 0.5W(70°C) Flow/Soldering Iron 4 50ohm ±10% ±100ppm/°C

PV12p101A01 0.5W(70°C) Flow/Soldering Iron 4 100ohm ±10% ±100ppm/°C

PV12p201A01 0.5W(70°C) Flow/Soldering Iron 4 200ohm ±10% ±100ppm/°C

PV12p501A01 0.5W(70°C) Flow/Soldering Iron 4 500ohm ±10% ±100ppm/°C

PV12p102A01 0.5W(70°C) Flow/Soldering Iron 4 1k ohm ±10% ±100ppm/°C

PV12p202A01 0.5W(70°C) Flow/Soldering Iron 4 2k ohm ±10% ±100ppm/°C

PV12p502A01 0.5W(70°C) Flow/Soldering Iron 4 5k ohm ±10% ±100ppm/°C

PV12p103A01 0.5W(70°C) Flow/Soldering Iron 4 10k ohm ±10% ±100ppm/°C

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

55

8

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Part Number Power Rating Soldering Method Number of Turns

(Effective Rotation Angle) Total Resistance Value TCR

Continued from the preceding page.

PV12p203A01 0.5W(70°C) Flow/Soldering Iron 4 20k ohm ±10% ±100ppm/°C

PV12p503A01 0.5W(70°C) Flow/Soldering Iron 4 50k ohm ±10% ±100ppm/°C

PV12p104A01 0.5W(70°C) Flow/Soldering Iron 4 100k ohm ±10% ±100ppm/°C

PV12p204A01 0.5W(70°C) Flow/Soldering Iron 4 200k ohm ±10% ±100ppm/°C

PV12p504A01 0.5W(70°C) Flow/Soldering Iron 4 500k ohm ±10% ±100ppm/°C

PV12p105A01 0.5W(70°C) Flow/Soldering Iron 4 1M ohm ±10% ±100ppm/°C

PV12p205A01 0.5W(70°C) Flow/Soldering Iron 4 2M ohm ±10% ±100ppm/°C

Operating Temperature Range: -55 to 125 °C

The blank column is filled with the code of adjustment direction and lead type (H, P, T and S).

The order quantity should be an integral multiple of the "Minimum Quantity".

■ Construction

Gear

Rotor

Terminal

Wiper

Insert

"O"-Ring

Case

Shaft

Ceramic Resistive

Element

Alumina Substrate

■ Mounting Holes

PV12H

(1) (3)

(2)

2.5

Tolerance:±0.1

in mm

PV12P/PV12S

2.5 2.5

2.5

(2)

(1)

(3)

Tolerance:±0.1

in mm

PV12T

2.5 2.5

2.5

(2)

(3)

(1)

Tolerance:±0.1

in mm

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

56

8

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

■ Characteristics ∆TR ±2%

∆V.S.S. ±1%

∆TR ±2%

IR 100Mohm min.

∆TR ±1%

∆V.S.S. ±1%

∆TR ±1%

∆V.S.S. ±1%

∆TR ±3%

∆V.S.S. ±2%

∆TR ±3%

∆V.S.S. ±1.5%

∆TR ±3%

∆V.S.S. ±1.5%

∆TR ±3%

Temperature Cycle

Humidity

Vibration (20G)

Shock (100G)

Temperature Load Life

Low Temperature Exposure

High Temperature Exposure

Rotational Life (200 cycles)

∆TR : Total Resistance Change

∆V.S.S. : Voltage Setting Stability

IR : Insulation Resistance

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

57

8

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

PV37 Series

■ Features

1. Smaller volume (about one-third) than 25-turns

potentiometer

2. Sealed construction protects the interior from dust

and liquid, which achieves stable performance.

3. Available for ultrasonic cleaning after soldering

4. Clutch mechanism prevents excessive wiper rotation.

5. 5 standard terminal styles

6. Both Top and side adjustment directions

7. To be complied with RoHS directive by new Cd free

cermet resistive material. Pb free terminals with

Sn plating.

■ Applications

1. Measuring instruments 2. OA equipment

3. Medical equipment 4. Power supply

5. Base station for cellular phone

#2

#1 #3

CLOCKWISE

#1 #2 #3

6.4

2.5

0.7

2.5

6.7

1.8±0.2 Dia.

1.2

1.1

5.0±1.0 4.0

3−0.4±0.1 Dia.

0.6±0.2

1.0

0.6

2.5

Marking

in mm

(

Tolerance : ±0.3

)

PV37P

#1#2#3

6.4 1.2

2.5

0.7

2.5

6.7

1.8±0.2 Dia.

1.1

5.0±1.0

3−0.4±0.1 Dia.

0.6±0.2

1.0

0.6

2.5

4.0

#2

#1 #3

CLOCKWISE

Marking

in mm

(

Tolerance : ±0.3

)

PV37W

#2

#1 #3

CLOCKWISE

#1#2#3

6.4

Marking

1.1

2.5

0.7

2.5

6.7

1.8±0.2 Dia.

1.1

5.0±1.0

3−0.4±0.1 Dia.

0.6±0.2

1.0

0.6

2.5

4.0

in mm

(

Tolerance : ±0.3

)

PV37X

6.4

6.75.0±1.0

1.2

3−0.4±0.1 Dia.

1.8±0.2 Dia.

0.6±0.2

#1#2#3

2.5 2.5

4.0

2.0

1.1

1.0

0.6

#2

#1 #3

CLOCKWISE

Marking

in mm

(

Tolerance : ±0.3

)

PV37Y

6.4

6.7

5.0±1.0

3−0.4±0.1 Dia.

1.8±0.2 Dia.

0.6±0.2

#1#2#32.5 2.5

4.0

2.0

1.1

0.6

1.0

#2

#1 #3

CLOCKWISE

Marking

in mm

(

Tolerance : ±0.3

)

PV37Z

Part Number Power Rating Soldering Method Number of Turns

(Effective Rotation Angle) Total Resistance Value TCR

PV37p100C01 0.25W(85°C) Flow/Soldering Iron 12 10ohm ±10% ±150ppm/°C

PV37p200C01 0.25W(85°C) Flow/Soldering Iron 12 20ohm ±10% ±150ppm/°C

PV37p500C01 0.25W(85°C) Flow/Soldering Iron 12 50ohm ±10% ±150ppm/°C

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

58

8

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Part Number Power Rating Soldering Method Number of Turns

(Effective Rotation Angle) Total Resistance Value TCR

Continued from the preceding page.

PV37p101C01 0.25W(85°C) Flow/Soldering Iron 12 100ohm ±10% ±150ppm/°C

PV37p201C01 0.25W(85°C) Flow/Soldering Iron 12 200ohm ±10% ±150ppm/°C

PV37p501C01 0.25W(85°C) Flow/Soldering Iron 12 500ohm ±10% ±150ppm/°C

PV37p102C01 0.25W(85°C) Flow/Soldering Iron 12 1k ohm ±10% ±150ppm/°C

PV37p202C01 0.25W(85°C) Flow/Soldering Iron 12 2k ohm ±10% ±150ppm/°C

PV37p502C01 0.25W(85°C) Flow/Soldering Iron 12 5k ohm ±10% ±150ppm/°C

PV37p103C01 0.25W(85°C) Flow/Soldering Iron 12 10k ohm ±10% ±150ppm/°C

PV37p203C01 0.25W(85°C) Flow/Soldering Iron 12 20k ohm ±10% ±150ppm/°C

PV37p253C01 0.25W(85°C) Flow/Soldering Iron 12 25k ohm ±10% ±150ppm/°C

PV37p503C01 0.25W(85°C) Flow/Soldering Iron 12 50k ohm ±10% ±150ppm/°C

PV37p104C01 0.25W(85°C) Flow/Soldering Iron 12 100k ohm ±10% ±150ppm/°C

PV37p204C01 0.25W(85°C) Flow/Soldering Iron 12 200k ohm ±10% ±150ppm/°C

PV37p254C01 0.25W(85°C) Flow/Soldering Iron 12 250k ohm ±10% ±150ppm/°C

PV37p504C01 0.25W(85°C) Flow/Soldering Iron 12 500k ohm ±10% ±150ppm/°C

PV37p105C01 0.25W(85°C) Flow/Soldering Iron 12 1M ohm ±10% ±150ppm/°C

PV37p205C01 0.25W(85°C) Flow/Soldering Iron 12 2M ohm ±10% ±150ppm/°C

PV37p100C31 0.25W(85°C) Flow/Soldering Iron 12 10ohm ±10% ±150ppm/°C

PV37p200C31 0.25W(85°C) Flow/Soldering Iron 12 20ohm ±10% ±150ppm/°C

PV37p500C31 0.25W(85°C) Flow/Soldering Iron 12 50ohm ±10% ±150ppm/°C

PV37p101C31 0.25W(85°C) Flow/Soldering Iron 12 100ohm ±10% ±150ppm/°C

PV37p201C31 0.25W(85°C) Flow/Soldering Iron 12 200ohm ±10% ±150ppm/°C

PV37p501C31 0.25W(85°C) Flow/Soldering Iron 12 500ohm ±10% ±150ppm/°C

PV37p102C31 0.25W(85°C) Flow/Soldering Iron 12 1k ohm ±10% ±150ppm/°C

PV37p202C31 0.25W(85°C) Flow/Soldering Iron 12 2k ohm ±10% ±150ppm/°C

PV37p502C31 0.25W(85°C) Flow/Soldering Iron 12 5k ohm ±10% ±150ppm/°C

PV37p103C31 0.25W(85°C) Flow/Soldering Iron 12 10k ohm ±10% ±150ppm/°C

PV37p203C31 0.25W(85°C) Flow/Soldering Iron 12 20k ohm ±10% ±150ppm/°C

PV37p253C31 0.25W(85°C) Flow/Soldering Iron 12 25k ohm ±10% ±150ppm/°C

PV37p503C31 0.25W(85°C) Flow/Soldering Iron 12 50k ohm ±10% ±150ppm/°C

PV37p104C31 0.25W(85°C) Flow/Soldering Iron 12 100k ohm ±10% ±150ppm/°C

PV37p204C31 0.25W(85°C) Flow/Soldering Iron 12 200k ohm ±10% ±150ppm/°C

PV37p254C31 0.25W(85°C) Flow/Soldering Iron 12 250k ohm ±10% ±150ppm/°C

PV37p504C31 0.25W(85°C) Flow/Soldering Iron 12 500k ohm ±10% ±150ppm/°C

PV37p105C31 0.25W(85°C) Flow/Soldering Iron 12 1M ohm ±10% ±150ppm/°C

PV37p205C31 0.25W(85°C) Flow/Soldering Iron 12 2M ohm ±10% ±150ppm/°C

Operating Temperature Range: -55 to 125 °C

The blank column is filled with the code of adjustment direction and lead type (P, X, Y, W and Z).

The order quantity should be an integral multiple of the "Minimum Quantity".

The last three digits express the individual specification codes. C01 for standard type and C31 for radial taping type (PV37Y/PV37Z series only).

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

59

8

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Part Number Power Rating

(W) Soldering Method Number of Turns

(Effective Rotation Angle) Total Resistance Value Remarks

TCR

(ppm/°C)

PV37p100A01

PV37p200A01

PV37p500A01

PV37p101A01

PV37p201A01

PV37p501A01

PV37p102A01

PV37p202A01

PV37p502A01

PV37p103A01

PV37p203A01

PV37p253A01

PV37p503A01

PV37p104A01

PV37p204A01

PV37p254A01

PV37p504A01

PV37p105A01

PV37p205A01

PV37p100A31

PV37p200A31

PV37p500A31

PV37p101A31

PV37p201A31

PV37p501A31

PV37p102A31

PV37p202A31

PV37p502A31

PV37p103A31

PV37p203A31

PV37p253A31

PV37p503A31

PV37p104A31

PV37p204A31

PV37p254A31

PV37p504A31

PV37p105A31

PV37p205A31

0.25(85°C)

Flow/Soldering Iron

12

10 ohm±10%

20 ohm±10%

50 ohm±10%

100 ohm±10%

200 ohm±10%

500 ohm±10%

1k ohm±10%

2k ohm±10%

5k ohm±10%

10k ohm±10%

20k ohm±10%

25k ohm±10%

50k ohm±10%

100k ohm±10%

200k ohm±10%

250k ohm±10%

500k ohm±10%

1M ohm±10%

2M ohm±10%

10 ohm±10%

20 ohm±10%

50 ohm±10%

100 ohm±10%

200 ohm±10%

500 ohm±10%

1k ohm±10%

2k ohm±10%

5k ohm±10%

10k ohm±10%

20k ohm±10%

25k ohm±10%

50k ohm±10%

100k ohm±10%

200k ohm±10%

250k ohm±10%

500k ohm±10%

1M ohm±10%

2M ohm±10%

±100

Non Standard

Product

(Cd included)

■ Construction

Gear Case

Terminal

Alumina Substrate

Wiper

Cermet Resistive

Element

Adjustment Screw

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

60

8

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

■ Mounting Holes

PV37P

2.5 2.5

2.5

(2)

(3)

(1)

Tolerance:±0.1

in mm

PV37W/PV37X

(3) (1)

(2)

2.5

Tolerance ±0.1

in mm

PV37Y/PV37Z

2.5 2.5

(2)(3) (1)

Tolerance:±0.1

in mm

■ Characteristics ∆TR ±1%

∆V.S.S. ±1%

∆TR ±2%

IR 100Mohm min.

∆TR ±1%

∆V.S.S. ±1%

∆TR ±1%

∆V.S.S. ±1%

∆TR ±2%

∆V.S.S. ±1%

∆TR ±1%

∆V.S.S. ±1%

∆TR ±2%

∆V.S.S. ±1%

∆TR RV100ohm ... ±3%

RG100ohm ... ±2%

Temperature Cycle

Humidity

Vibration (20G)

Shock (100G)

Temperature Load Life

Low Temperature Exposure

High Temperature Exposure

Rotational Life (200 cycles)

∆TR : Total Resistance Change

∆V.S.S. : Voltage Setting Stability

IR : Insulation Resistance

R : Standard Total Resistance

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

61

8

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

PV23 Series

■ Features

1. Small size (4.6x6.4x19.1mm) and high power rating

(0.75W at 70deg.C)

2. Sealed construction protects the interior from dust

and liquid, which achieves stable performance.

3. Available for ultrasonic cleaning after soldering

4. Clutch mechanism prevents excessive wiper rotation.

5. To be complied with RoHS directive by new Cd free

cermet resistive material. Pb free terminals with

Sn plating.

■ Applications

1. Measuring instruments 2. FAX

3. Copier 4. Printers

5. Sensors

#2

#1 #3

CLOCKWISE

#1 #2 #3

19.1

1.5

0.8

0.6

2.35 Dia.

4.6

4.9

6.4

5.0±1.0

12.7 3.3

5.1

2.5

3−0.5±0.1 Dia.

0.3

in mm

(

Tolerance : ±0.3

)

PV23P

#3#1

#2

#1 #3

CLOCKWISE

#2

19.1

1.5

0.8

0.6

2.35 Dia.

4.6

4.9

6.4

5.0±1.0

17.8 0.6

7.6

2.5

3−0.5±0.1 Dia.

0.3

in mm

(

Tolerance : ±0.3

)

PV23Y

Part Number Power Rating Soldering Method Number of Turns

(Effective Rotation Angle) Total Resistance Value TCR

PV23p100C01 0.75W(70°C) Flow/Soldering Iron 15 10ohm ±10% ±150ppm/°C

PV23p200C01 0.75W(70°C) Flow/Soldering Iron 15 20ohm ±10% ±150ppm/°C

PV23p500C01 0.75W(70°C) Flow/Soldering Iron 15 50ohm ±10% ±150ppm/°C

PV23p101C01 0.75W(70°C) Flow/Soldering Iron 15 100ohm ±10% ±150ppm/°C

PV23p201C01 0.75W(70°C) Flow/Soldering Iron 15 200ohm ±10% ±100ppm/°C

PV23p501C01 0.75W(70°C) Flow/Soldering Iron 15 500ohm ±10% ±100ppm/°C

PV23p102C01 0.75W(70°C) Flow/Soldering Iron 15 1k ohm ±10% ±100ppm/°C

PV23p202C01 0.75W(70°C) Flow/Soldering Iron 15 2k ohm ±10% ±100ppm/°C

PV23p502C01 0.75W(70°C) Flow/Soldering Iron 15 5k ohm ±10% ±100ppm/°C

PV23p103C01 0.75W(70°C) Flow/Soldering Iron 15 10k ohm ±10% ±100ppm/°C

PV23p203C01 0.75W(70°C) Flow/Soldering Iron 15 20k ohm ±10% ±100ppm/°C

PV23p503C01 0.75W(70°C) Flow/Soldering Iron 15 50k ohm ±10% ±100ppm/°C

PV23p104C01 0.75W(70°C) Flow/Soldering Iron 15 100k ohm ±10% ±100ppm/°C

PV23p204C01 0.75W(70°C) Flow/Soldering Iron 15 200k ohm ±10% ±100ppm/°C

PV23p504C01 0.75W(70°C) Flow/Soldering Iron 15 500k ohm ±10% ±100ppm/°C

PV23p105C01 0.75W(70°C) Flow/Soldering Iron 15 1M ohm ±10% ±100ppm/°C

PV23p205C01 0.75W(70°C) Flow/Soldering Iron 15 2M ohm ±10% ±100ppm/°C

Operating Temperature Range: -55 to 125 °C

The blank column is filled with the code of adjustment direction and lead type (P and Y).

The order quantity should be an integral multiple of the "Minimum Quantity".

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

62

8

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Part Number Power Rating

(W) Soldering Method Number of Turns

(Effective Rotation Angle) Total Resistance Value Remarks

TCR

(ppm/°C)

PV23p100A01

PV23p200A01

PV23p500A01

PV23p101A01

PV23p201A01

PV23p501A01

PV23p102A01

PV23p202A01

PV23p502A01

PV23p103A01

PV23p203A01

PV23p503A01

PV23p104A01

PV23p204A01

PV23p504A01

PV23p105A01

PV23p205A01

0.75(70°C)

Flow/Soldering Iron

15

10 ohm±10%

20 ohm±10%

50 ohm±10%

100 ohm±10%

200 ohm±10%

500 ohm±10%

1k ohm±10%

2k ohm±10%

5k ohm±10%

10k ohm±10%

20k ohm±10%

50k ohm±10%

100k ohm±10%

200k ohm±10%

500k ohm±10%

1M ohm±10%

2M ohm±10%

±100

Non Standard

Product

(Cd included)

■ Construction

Alumina Substrate

Wiper

Post

Case

Terminal

Cermet

Resistive

Element

Adjustment

Screw

■ Mounting Holes

PV23P

12.7

5.1

2.5

(2)

(3)

(1)

Tolerance:±0.1

in mm

PV23Y

17.8

7.6

2.5

(2)

(3)

(1)

Tolerance:±0.1

in mm

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

63

8

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

■ Characteristics ∆TR ±2%

∆V.S.S. ±1%

∆TR ±2%

IR 100Mohm min.

∆TR ±1%

∆V.S.S. ±1%

∆TR ±1%

∆V.S.S. ±1%

∆TR ±3%

∆V.S.S. ±1%

∆TR ±1%

∆V.S.S. ±1%

∆TR ±2%

∆V.S.S. ±1%

∆TR ±3%

Temperature Cycle

Humidity

Vibration (20G)

Shock (50G)

Temperature Load Life

Low Temperature Exposure

High Temperature Exposure

Rotational Life (200 cycles)

∆TR : Total Resistance Change

∆V.S.S. : Voltage Setting Stability

IR : Insulation Resistance

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

64

8

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

PV22 Series

■ Features

1. High power rating (1W at 70 deg.C)

2. Sealed construction protects the interior from dust

and liquid, which achieves stable performance.

3. Available for ultrasonic cleaning after soldering

4. Clutch mechanism prevents excessive wiper rotation.

5. To be complied with RoHS directive by new Cd free

cermet resistive material. Pb free terminals with

Sn plating.

■ Applications

1. Measuring instruments 2. FAX

3. Copier 4. Printers

5. Sensors

#2

#1 #3

CLOCKWISE

#1(Yellow)

#2

(Red)

#3(Green)

31.8

25.4±0.2 3.2±0.2

1.7

3.0±0.2 Dia.

0.8±0.2

152 min.

6.0

4.7±0.2

5.0

1.9

8.0±0.4

Insulated standard wire

4.6

0.6±0.2

6.0

0.6±0.2

Mounting holes 2−2.5±0.2 Dia.

in mm

(

Tolerance : ±0.3

)

PV22L

#2

#1 #3

CLOCKWISE

#1#2 #3

31.8

25.4±0.2 3.2±0.2

1.7

3.0±0.2 Dia.

0.8±0.2

6.0

4.7±0.2

5.0

1.9

4.6

0.6±0.2

6.0

Mounting holes 2−2.5±0.2 Dia.

3−0.7±0.1 Dia.

17.8 6.6

22.9

8.0±0.4

7.0±1.0

in mm

(

Tolerance : ±0.3

)

PV22S

#2

#1 #3

CLOCKWISE

#1 #2 #3

31.8

25.4±0.2 3.2±0.2

1.7

3.0±0.2 Dia.

0.8±0.2

6.0

4.7±0.2

5.0

1.9

8.0±0.4

4.6

0.6±0.2

6.0

Mounting holes 2−2.5±0.2 Dia.

3−0.7±0.1 Dia.

17.8

6.6

7.6

7.0±1.0

2.5

in mm

(

Tolerance : ±0.3

)

PV22Y

Part Number Power Rating Soldering Method Number of Turns

(Effective Rotation Angle) Total Resistance Value TCR

PV22p100C01 1.0W(70°C) Flow/Soldering Iron 22 10ohm ±10% ±100ppm/°C

PV22p200C01 1.0W(70°C) Flow/Soldering Iron 22 20ohm ±10% ±100ppm/°C

PV22p500C01 1.0W(70°C) Flow/Soldering Iron 22 50ohm ±10% ±100ppm/°C

PV22p101C01 1.0W(70°C) Flow/Soldering Iron 22 100ohm ±10% ±100ppm/°C

PV22p201C01 1.0W(70°C) Flow/Soldering Iron 22 200ohm ±10% ±100ppm/°C

PV22p501C01 1.0W(70°C) Flow/Soldering Iron 22 500ohm ±10% ±100ppm/°C

PV22p102C01 1.0W(70°C) Flow/Soldering Iron 22 1k ohm ±10% ±100ppm/°C

PV22p202C01 1.0W(70°C) Flow/Soldering Iron 22 2k ohm ±10% ±100ppm/°C

PV22p502C01 1.0W(70°C) Flow/Soldering Iron 22 5k ohm ±10% ±100ppm/°C

PV22p103C01 1.0W(70°C) Flow/Soldering Iron 22 10k ohm ±10% ±100ppm/°C

PV22p203C01 1.0W(70°C) Flow/Soldering Iron 22 20k ohm ±10% ±100ppm/°C

PV22p503C01 1.0W(70°C) Flow/Soldering Iron 22 50k ohm ±10% ±100ppm/°C

PV22p104C01 1.0W(70°C) Flow/Soldering Iron 22 100k ohm ±10% ±100ppm/°C

PV22p204C01 1.0W(70°C) Flow/Soldering Iron 22 200k ohm ±10% ±100ppm/°C

PV22p504C01 1.0W(70°C) Flow/Soldering Iron 22 500k ohm ±10% ±100ppm/°C

PV22p105C01 1.0W(70°C) Flow/Soldering Iron 22 1M ohm ±10% ±100ppm/°C

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

65

8

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Part Number Power Rating Soldering Method Number of Turns

(Effective Rotation Angle) Total Resistance Value TCR

Continued from the preceding page.

PV22p205C01 1.0W(70°C) Flow/Soldering Iron 22 2M ohm ±10% ±100ppm/°C

Operating Temperature Range: -55 to 150 °C

The blank column is filled with the code of adjustment direction and lead type (L, S and Y).

The order quantity should be an integral multiple of the "Minimum Quantity".

Part Number Power Rating

(W) Soldering Method Number of Turns

(Effective Rotation Angle) Total Resistance Value Remarks

TCR

(ppm/°C)

PV22p100A01

PV22p200A01

PV22p500A01

PV22p101A01

PV22p201A01

PV22p501A01

PV22p102A01

PV22p202A01

PV22p502A01

PV22p103A01

PV22p203A01

PV22p503A01

PV22p104A01

PV22p204A01

PV22p504A01

PV22p105A01

PV22p205A01

1.0(70°C)

Flow/Soldering Iron

22

10 ohm±10%

20 ohm±10%

50 ohm±10%

100 ohm±10%

200 ohm±10%

500 ohm±10%

1k ohm±10%

2k ohm±10%

5k ohm±10%

10k ohm±10%

20k ohm±10%

50k ohm±10%

100k ohm±10%

200k ohm±10%

500k ohm±10%

1M ohm±10%

2M ohm±10%

±100

Non Standard

Product

(Cd included)

■ Construction

Case

Adjustment

Screw Post

Wiper

Alumina

Substrate

Terminal

Cermet

Resistive

Element

■ Mounting Holes

PV22S

17.8

22.9

(2) (1) (3)

Tolerance:±0.1

in mm

PV22Y

17.8

7.6

2.5

(2)

(3)

(1)

Tolerance:±0.1

in mm

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

66

8

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Continued from the preceding page.

■ Characteristics ∆TR ±2%

∆V.S.S. ±1%

∆TR ±2%

IR 100Mohm min.

∆TR ±1%

∆V.S.S. ±1%

∆TR ±1%

∆V.S.S. ±1%

∆TR ±3%

∆V.S.S. ±1%

∆TR ±1%

∆V.S.S. ±1%

∆TR ±2%

∆V.S.S. ±1%

∆TR ±2%

Temperature Cycle

Humidity

Vibration (20G)

Shock (50G)

Temperature Load Life

Low Temperature Exposure

High Temperature Exposure

Rotational Life (200 cycles)

∆TR : Total Resistance Change

∆V.S.S. : Voltage Setting Stability

IR : Insulation Resistance

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

67

8

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

PV36 Series

■ Features

1. High resolution 25-turns enables precision

adjustment easily.

2. Sealed construction protects the interior from dust

and liquid, which achieves stable performance.

3. Available for ultrasonic cleaning after soldering

4. Clutch mechanism prevents excessive wiper rotation.

5. 5 standard terminal styles

6. Both Top and side adjustment directions.

7. To be complied with RoHS directive by new Cd free

cermet resistive material. Pb free terminals with

Sn plating.

■ Applications

1. Measuring instruments 2. OA equipment

3. Medical equipment 4. Power supply

5. Base station for cellular phone

2.5 2.5

#2

#3#1

(Wiper)

Clockwise

(in mm)

(Tolerance : ±0.3)

#1 #2

9.6

#3

1.3

1.2

3-0.5±0.1 Dia.

6.0±1.0 5.0

Marking

0.7

1.3

10.0

2.55.2

0.5

2.0 Dia.

0.6

PV36P

2.5 2.5

2.5

#1#2#3

9.6

1.3

10.0

0.5

3-0.5±0.1 Dia.

6.0±1.0

2.0 Dia.

0.6

1.2

1.3

0.7

Marking

5.0

#2

#3#1

(Wiper)

Clockwise

(in mm)

(Tolerance : ±0.3)

PV36W

#1#2#3

1.3

5.0

9.6

10.0

0.5

2.0 Dia.

0.6

1.3

0.7

3-0.5±0.1 Dia.

6.0±1.0

2.5 2.5

2.5

1.2 Marking

#2

#3#1

(Wiper)

Clockwise

(in mm)

(Tolerance : ±0.3)

PV36X

#2

#3#1

(Wiper)

Clockwise

(in mm)

(Tolerance : ±0.3)

2.5 2.5

2.51.2

#1

#2#3

9.6

10.0

0.5

3-0.5±0.1 Dia.

6.0±1.0

2.0 Dia.

0.6

1.3

0.7

1.2

Marking

5.0

1.3

PV36Y

1.3

9.6

2.0 Dia.

0.6

1.3

0.7

1.2 Marking

10.0

0.5

6.0±1.0

#1#2#3

3-0.5±0.1 Dia.

2.5 2.5

Clockwise

(in mm)

(Tolerance : ±0.3)

5.0

2.51.2

#2

#3#1

(Wiper)

PV36Z

Part Number Power Rating Soldering Method Number of Turns

(Effective Rotation Angle) Total Resistance Value TCR

PV36p100C01 0.5W(70°C) Flow/Soldering Iron 25 10ohm ±10% ±150ppm/°C

PV36p200C01 0.5W(70°C) Flow/Soldering Iron 25 20ohm ±10% ±150ppm/°C

PV36p500C01 0.5W(70°C) Flow/Soldering Iron 25 50ohm ±10% ±150ppm/°C

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

68

8

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Part Number Power Rating Soldering Method Number of Turns

(Effective Rotation Angle) Total Resistance Value TCR

Continued from the preceding page.

PV36p101C01 0.5W(70°C) Flow/Soldering Iron 25 100ohm ±10% ±150ppm/°C

PV36p201C01 0.5W(70°C) Flow/Soldering Iron 25 200ohm ±10% ±100ppm/°C

PV36p501C01 0.5W(70°C) Flow/Soldering Iron 25 500ohm ±10% ±100ppm/°C

PV36p102C01 0.5W(70°C) Flow/Soldering Iron 25 1k ohm ±10% ±100ppm/°C

PV36p202C01 0.5W(70°C) Flow/Soldering Iron 25 2k ohm ±10% ±100ppm/°C

PV36p502C01 0.5W(70°C) Flow/Soldering Iron 25 5k ohm ±10% ±100ppm/°C

PV36p103C01 0.5W(70°C) Flow/Soldering Iron 25 10k ohm ±10% ±100ppm/°C

PV36p203C01 0.5W(70°C) Flow/Soldering Iron 25 20k ohm ±10% ±100ppm/°C

PV36p253C01 0.5W(70°C) Flow/Soldering Iron 25 25k ohm ±10% ±100ppm/°C

PV36p503C01 0.5W(70°C) Flow/Soldering Iron 25 50k ohm ±10% ±100ppm/°C

PV36p104C01 0.5W(70°C) Flow/Soldering Iron 25 100k ohm ±10% ±100ppm/°C

PV36p204C01 0.5W(70°C) Flow/Soldering Iron 25 200k ohm ±10% ±100ppm/°C

PV36p254C01 0.5W(70°C) Flow/Soldering Iron 25 250k ohm ±10% ±100ppm/°C

PV36p504C01 0.5W(70°C) Flow/Soldering Iron 25 500k ohm ±10% ±100ppm/°C

PV36p105C01 0.5W(70°C) Flow/Soldering Iron 25 1M ohm ±10% ±100ppm/°C

PV36p205C01 0.5W(70°C) Flow/Soldering Iron 25 2M ohm ±10% ±100ppm/°C

PV36p100C31 0.5W(70°C) Flow/Soldering Iron 25 10ohm ±10% ±150ppm/°C

PV36p200C31 0.5W(70°C) Flow/Soldering Iron 25 20ohm ±10% ±150ppm/°C

PV36p500C31 0.5W(70°C) Flow/Soldering Iron 25 50ohm ±10% ±150ppm/°C

PV36p101C31 0.5W(70°C) Flow/Soldering Iron 25 100ohm ±10% ±150ppm/°C

PV36p201C31 0.5W(70°C) Flow/Soldering Iron 25 200ohm ±10% ±100ppm/°C

PV36p501C31 0.5W(70°C) Flow/Soldering Iron 25 500ohm ±10% ±100ppm/°C

PV36p102C31 0.5W(70°C) Flow/Soldering Iron 25 1k ohm ±10% ±100ppm/°C

PV36p202C31 0.5W(70°C) Flow/Soldering Iron 25 2k ohm ±10% ±100ppm/°C

PV36p502C31 0.5W(70°C) Flow/Soldering Iron 25 5k ohm ±10% ±100ppm/°C

PV36p103C31 0.5W(70°C) Flow/Soldering Iron 25 10k ohm ±10% ±100ppm/°C

PV36p203C31 0.5W(70°C) Flow/Soldering Iron 25 20k ohm ±10% ±100ppm/°C

PV36p253C31 0.5W(70°C) Flow/Soldering Iron 25 25k ohm ±10% ±100ppm/°C

PV36p503C31 0.5W(70°C) Flow/Soldering Iron 25 50k ohm ±10% ±100ppm/°C

PV36p104C31 0.5W(70°C) Flow/Soldering Iron 25 100k ohm ±10% ±100ppm/°C

PV36p204C31 0.5W(70°C) Flow/Soldering Iron 25 200k ohm ±10% ±100ppm/°C

PV36p254C31 0.5W(70°C) Flow/Soldering Iron 25 250k ohm ±10% ±100ppm/°C

PV36p504C31 0.5W(70°C) Flow/Soldering Iron 25 500k ohm ±10% ±100ppm/°C

PV36p105C31 0.5W(70°C) Flow/Soldering Iron 25 1M ohm ±10% ±100ppm/°C

PV36p205C31 0.5W(70°C) Flow/Soldering Iron 25 2M ohm ±10% ±100ppm/°C

Operating Temperature Range: -55 to 125 °C

The blank column is filled with the code of adjustment direction and lead type (P, X, Y, W and Z).

The order quantity should be an integral multiple of the "Minimum Quantity".

The last three digits express the individual specification codes. C01 for standard type and C31 for radial taping type (PV36W/PV36X series only).

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

69

8

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Part Number Power Rating

(W) Soldering Method Number of Turns

(Effective Rotation Angle) Total Resistance Value Remarks

TCR

(ppm/°C)

PV36p100A01

PV36p200A01

PV36p500A01

PV36p101A01

PV36p201A01

PV36p501A01

PV36p102A01

PV36p202A01

PV36p502A01

PV36p103A01

PV36p203A01

PV36p253A01

PV36p503A01

PV36p104A01

PV36p204A01

PV36p254A01

PV36p504A01

PV36p105A01

PV36p205A01

PV36p100A31

PV36p200A31

PV36p500A31

PV36p101A31

PV36p201A31

PV36p501A31

PV36p102A31

PV36p202A31

PV36p502A31

PV36p103A31

PV36p203A31

PV36p253A31

PV36p503A31

PV36p104A31

PV36p204A31

PV36p254A31

PV36p504A31

PV36p105A31

PV36p205A31

0.5(70°C)

Flow/Soldering Iron

25

10 ohm±10%

20 ohm±10%

50 ohm±10%

100 ohm±10%

200 ohm±10%

500 ohm±10%

1k ohm±10%

2k ohm±10%

5k ohm±10%

10k ohm±10%

20k ohm±10%

25k ohm±10%

50k ohm±10%

100k ohm±10%

200k ohm±10%

250k ohm±10%

500k ohm±10%

1M ohm±10%

2M ohm±10%

10 ohm±10%

20 ohm±10%

50 ohm±10%

100 ohm±10%

200 ohm±10%

500 ohm±10%

1k ohm±10%

2k ohm±10%

5k ohm±10%

10k ohm±10%

20k ohm±10%

25k ohm±10%

50k ohm±10%

100k ohm±10%

200k ohm±10%

250k ohm±10%

500k ohm±10%

1M ohm±10%

2M ohm±10%

±100

Non Standard

Product

(Cd included)

■ Construction

Adjustment Screw

Case

Alumina Substrate

Terminal

Wiper

Cermet Resistive Element

Gear

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

70

8

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

■ Mounting Holes

PV36P

2.5 2.5

2.5

(2)

(3)

(1)

Tolerance:±0.1

in mm

PV36W/X

2.5 2.5

(2)(3) (1)

Tolerance:±0.1

in mm

PV36Y/Z

(3) (1)

(2)

2.5

Tolerance ±0.1

in mm

■ Characteristics ∆TR ±2%

∆V.S.S. ±1%

∆TR ±2%

IR 100Mohm min.

∆TR ±1%

∆V.S.S. ±1%

∆TR ±1%

∆V.S.S. ±1%

∆TR ±3%

∆V.S.S. ±1%

∆TR ±2%

∆V.S.S. ±1%

∆TR ±3%

∆V.S.S. ±1%

∆TR

RV1kohm, RU500kohm ... ±5%

1kohmFRF500kohm ... ±3%

Temperature Cycle

Humidity

Vibration (20G)

Shock (100G)

Temperature Load Life

Low Temperature Exposure

High Temperature Exposure

Rotational Life (200 cycles)

∆TR : Total Resistance Change

∆V.S.S. : Voltage Setting Stability

IR : Insulation Resistance

R : Standard Total Resistance

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

PV12/PV37/PV23/PV22/PV36 Series Notice

71

8

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

■ Notice (Operating and Storage Conditions)

1. Store in temperatures of -10 to +40 deg. C and

relative humidity of 30-85%RH.

2. Do not store in or near corrosive gases.

3. Use within six months after delivery.

4. Open the package just before using.

5. Do not store under direct sunlight.

6. If you use the trimmer potentiometer in an

environment other than listed below, please

consult with a Murata factory representative prior

to using.

The trimmer potentiometer should not be used under

the following environmental conditions:

(1) Corrosive gaseous atmosphere

(Ex. Chlorine gas, Hydrogen sulfide gas, Ammonia

gas, Sulfuric acid gas, Nitric oxide gas, etc.)

(2) In liquid

(Ex. Oil, Medical liquid, Organic solvent, etc.)

(3) Dusty / dirty atmosphere

(4) Direct sunlight

(5) Static voltage nor electric/magnetic fields

(6) Direct sea breeze

(7) Other variations of the above

■ Notice (Rating)

1. When using with partial load (rheostat), minimize

the power depending on the resistance value.

2. The maximum input voltage to a trimmer

potentiometer should not exceed (P.R)^1/2 or the

maximum operating voltage, whichever is smaller.

3. The maximum input current to a trimmer

potentiometer should not exceed (P/R)^1/2 or the

allowable wiper current, whichever is smaller.

■ Notice (Soldering and Mounting)

1. Soldering

(1) Standard soldering condition

(a) Flow soldering :

>Pre-heating temp. 80-100 deg. C

>Soldering temp. 260 deg. C max.

>Soldering time 3 sec. max.

(b) Soldering iron :

>Temperature of tip 300 deg. C max.

>Soldering time 3 sec. max.

>Wattage of iron 40W max.

Before using other soldering conditions than

those listed above, please consult with Murata

factory representative prior to using. If the

soldering conditions are not suitable, e.g.,

excessive time and/or excessive temperature,

the trimmer potentiometer may deviate from the

specified characteristics.

(2) To minimize mechanical stress when adjusting,

the trimmer potentiometer should be mounted onto

PCB without gap.

(3) The soldering iron should not come in contact

with the case of the trimmer potentiometer. If

such contact does occur, the trimmer

potentiometer may be damaged.

2. Mounting

(1) Use PCB hole to meet the pin of the trimmer

potentiometer. If the trimmer potentiometer

installs into insufficient PCB hole, the

trimmer potentimeter may be damaged by

mechanical stress.

(2) Do not apply excessive force (preferably 9.8N

(Ref.; 1kgf) max.), when the trimmer

potentiometer is mounted to the PCB.

3. Cleaning

(1) Isopropyl-alcohol and Ethyl-alcohol are

applicable solvents for cleaning. If you use any

other types of solvents, please consult with a

Murata factory representative prior to using.

(2) The total cleaning time by cold dipping, vapor

and ultrasonic washing (conditions as below)

method should be less than 3 minutes.

(3) For ultra-sonic cleaning, the available

condition is as follows.

>Power: 600W (67 liter) max.

>Frequency: 28kHz

>Temperature: Ambient temperature

Due to the ultra-sonic cleaning equipment's

peculiar self-resonance point and that the

cleaning compatibility usually depends on the jig

construction and/or the cleaning condition such

as the depth of immersion, please check the

cleaning equipment to determine the suitable

conditions.

If the trimmer potentiometer is cleaned by

other conditions, the trimmer potentiometer may

be damaged.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

PV12/PV37/PV23/PV22/PV36 Series Notice

72

8

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

■ Notice (Handling)

1. Use suitable screwdrivers that fit comfortably in

driver slot. We recommend the screwdrivers below.

* Recommended screwdriver for manual adjustment

ENGINEER INC. : DA-40

(Murata P/N : KMDR180)

We can supply the screwdrivers above.

If you place order, please specify the Murata P/N.

2. Don't apply more than 9.8N (Ref.; 1kgf) of twist

and stress after mounting onto PCB to prevent

contact intermittence. If excessive force is

applied, the trimmer potentiometer may not

function.

3. When adjusting with an adjustment tool, the applied

force to the adjustment screw should not exceed

4.9N (Ref.; 500gf). If excessive force is applied,

the trimmer potentiometer may not function due to

damage.

4. When using a lock paint to fix slot position,

please use adhesive resin without chlorine or

sulfur (Three-bond "1401 series").

■ Notice (Other)

1. Please make sure that your product has been

evaluated and confirmed against your

specifications when our product is mounted to your

product.

2. Murata cannot guarantee trimmer potentiometer

integrity when used under conditions other than

those specified in this document.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

No.

Item Test Methods

Total Resistance1

Measure total resistance between the resistance element and terminals (#1 and #3) with the contact arm positioned

against a stop. The positioning of the contact arm and terminal should be the same for subsequent total resistance

measurements on the same device. Use the test voltage specified in Table 1 for total resistance measurements.

This voltage should be used for all subsequent total resistance measurements.

Specifications and Test Methods

Residual Resistance2

Position the contact arm at the extreme counterclockwise limit of mechanical travel and measure the resistance

between the contact arm and the corresponding end terminal. Then, position the contact arm at the extreme clock-

wise limit of mechanical travel and measure the resistance between the contact arm and the corresponding end ter-

minal. During this test, take suitable precautions to ensure that the rated current of the resistance element is not

exceeded.

Contact Resistance

Variation

3

4

1

5

Rx

#

1

#

2

#

3

Constant Current Source

(Test current shown in Table2) Proofread

Resistance AC

Amplifier

Oscilloscope

Oscilloscope bandwidth :100Hz to 50kHz

Rx : Trimmer Potentiometer

Figure 1: CRV measuring circuit

Contact resistance variation should be measured with the measuring circuit shown in Figure 1, or its equivalent. The

adjustment rotor (screw) should be rotated in both directions through 90% of the actual effective-electrical rotational

angle (number of turns) for a total of 6 cycles. Only the last 3 cycles should count in determining whether or not a

contact resistance variation is observed at least twice in the same location, exclusive of the roll-on or roll-off points

where the contact arm moves from the termination, on or off, the resistance element. The rate of rotation of the

adjustment rotor (screw) should be such that the adjustment rotor (screw) completes 1 cycle for 5 seconds minimum

to 2 minutes maximum. The test current used should follow the value given in Table 2 unless otherwise limited by

power rating.

Standard Total Resistance

R (ohm)

RV100

100FRF500

500VRF1k

1kVRF2k

2kVRF50k

50kVRF200k

200kVRF1M

1MVRF2M

2MVR

20mA

Test Current

Table 2: Test current for CRV

10mA

4mA

Temperature Coefficient of

Resistance

The trimmer potentiometer should be subjected to each of the following temperatures (see Table 3) for 30-45 min-

utes. Temperature coefficient of resistance should be applied to the following formula.

TCR= Z106(ppm/°C)

T1: Reference temperature in degrees celsius

T2: Test temperature in degrees celsius

R1: Resistance at reference temperature ohm

R2: Resistance at test temperature in ohm

R2– R1

R1(T2– T1)

Voltage Setting

Stability

The wiper should be set at approximately 40% of the actual effective-electrical rotational angle (number of turns). An

adequate DC test potential should be applied between terminal #1 and terminal #3. The voltage between terminal #1

and terminal #3, and the voltage between terminal #1 and terminal #2, should be measured and applied to the

following formula.

Voltage setting stability=

(

–

)

Z100 (%)

e : Before test

(The voltage between terminal #1 and terminal #2)

e': After test

(The voltage between terminal #1 and terminal #2)

E: The voltage between terminal #1 and terminal #3

e

E

e'

E

The following describes trimmer potentiometer testing conducted by Murata Manufacturing Co., Ltd. in accordance with MIL-R-22097 (Military specification

for variable resistors, non-wirewound) and MIL-STD-202 (Test methods for electronic and electrical component parts).

2mA

1mA

200µA

100µA

50µA

30µA

e#2

#1 #3

E

Figure 2

Total Resistance,

Nominal (ohm)

10VRV100

100FRV1k

1kFRV10k

10kFRV100k

100kFR

1.0

Maximum Test

Voltage (V)

Table 1: Total resistance test voltage

3.0

10.0

30.0

100.0

Sequence

Temperature (°C) +25

1*

Table 3: Test temperatures

-15

23

Min. operating

Temperature +25

4*

Note*: Reference temperature

+65

56

Max. operating

Temperature

Continued on the following page.

SMD Sealed Type/Lead Sealed Type Specifications and Test Methods

79

9

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

No.

Item Test Methods

Temperature Cycle6

The trimmer potentiometer should be subjected to Table 4 temperature for 5 cycles. The trimmer potentiometer

should be removed from the chamber, and maintained at a temperature of 25±5°C for 1~2 hours.

Specifications and Test Methods

Humidity7

1) PVC6, PV12, PV32, PV34 PVM4A---D01 series

The trimmer potentiometer should be placed in a chamber at a temperature of 40±2°C and a humidity of 90~95%

without loading for 250±8 hours (500±12 hours for PVM4A---D01 series). The trimmer potentiometer should be

removed from the chamber, and maintained at a temperature of 25±5°C for 5±1/6 hours.

2) PVF2 series

The trimmer potentiometer should be placed in a chamber at 60±2°C and 90~95% without loading for 1000±12

hours. The trimmer potentiometer should be removed from the chamber, and maintained at a temperature of 25±5°C

for 5±1/6 hours

2) PVG3, PVG5, PV01, PV22, PV23, PV36, PV37 series

The trimmer potentiometer should be subjected Figure-3 the programmed humidity environment for 10 cycle. The trim-

mer potentiometer should be removed from the chamber, and maintained at a temperature of 25±5°C for 1.5±1/2

hours.

1

Vibration8

1) PV-- series

The trimmer potentiometer should be vibrated throughout the frequency range at the 20G level. A complete frequen-

cy range, 10Hz to 2000Hz and back, should be made within 15 minutes for a total of 4 sweeps in each of the three

axis direction for a total of 12 sweeps.

2) PVF2 series

The trimmer potentiometer should be subjected to vibration at 0.3 inch amplitude. The frequency should be varied

uniformly between the approximate limits of 10Hz and 55Hz. This motion should be applied for period of 2 hours in

each of 3 mutually perpendicular directions (total of 6 hours).

Sequence

Temp.

(°C)

PV-- series

PV22 series

PVF2 series

1

Table 4: One cycle of temperature cycle.

-55±3

-25±3

2

+25±2

Time (min.) 30 5 max.

3

+125±3

+150±3

+60±3

30

4

+25±2

5 max.

Continued from the preceding page.

INITIAL CONDITIONING

IN A DRY OVEN

24 HOURS

INITIAL MEASUREMENTS

AS SPECIFIED IN 3.2 CIRCULATION OF CONDITIONING AIR SHOULD

BE AT A MINIMUM CUBIC RATE PER MINUTE

EQUIVALENT TO 5 TIMES THE VOLUME OF

THE CHAMBER

22 23 242120191817161514131211109876543210

70

65

60

55

50

45

40

35

30

25

20

15

10

5

-5

-10

0

ONE CYCLE 24 HOURS. REPEAT AS SPECIFIED IN 3.3

PRIOR TO FIRST CYCLE

UNLESS OTHERWISE

SPECIFIED STEP 7STEP 6STEP 5STEP 4STEP 3STEP 2STEP 1

UNLESS OTHERWISE SPECIFIED

TEMPERATURE TOLERANCE IS,

±2°C AT ALL POINTS WITHIN THE

CHAMBER EXCEPT THE IMMEDIATE

VICINITY OF THE SPECIMENS AND

THE CHAMBER SURFACES STEP 7a

STEPS 7a AND 7b PERFORMED DURING ANY

5 OF THE FIRST 9 CYCLES. HUMIDITY

UNCONTROLLED DURING STEPS 7a AND 7b

ONLY

VOLTAGE APPLIED AS SPECIFIED IN 3.5

STEP 7b

END OF FINAL CYCLE

MEASUREMENTS AS

SPECIFIED IN 3.6

+10°C

-2°C

HUMIDITY

UNCONTROLLED

RATE OF CHANGE OF TEMPERATURE IS UNSPECIFIED.

HOWEVER, SPECIMENS SHOULD NOT BE SUBJECTED

TO RADIANT HEAT FROM CHAMBER-CONDITIONING

PROCESSES

90-98%RH 80-98%RH 90-98%RH 80-98%RH 90-98%RH

TEMPERATURE (DEGREES CELSIUS)

MIL-STD-202 METHOD 106

Figure 3

Shock9

1) PV-- series

The trimmer potentiometer should be shocked at the 100G (50G for PV22 and PV23 series) level and should be

subjected to 4 shocks in each of the three axis directions for a total of 12 shocks.

2) PVM4A---D01 series

The trimmer potentiometer should be shocked at the 100G level and should be subjected to 3 shocks in each of the

six axis directions for a total of 18 shocks.

Temperature Road Life10

Full rated continuous working voltage not exceeding the maximum rated voltage should be applied intermittently

between terminal #1 and terminal #3 of the trimmer potentiometer, 1.5 hours on and 0.5 hours off, for a total of

1000±12 hours, at a temperature of 70±2°C (85±2°C for PV01 and PV37 series, 50±2°C for PVF2 series). The trim-

mer potentiometer should be removed from the chamber, and maintained at a temperature of 25±5°C for 1 to 2 hours.

High Temperature Exposure

(Except for PVF2)

11 The trimmer potentiometer should be placed in a chamber at a temperature of 125±3°C (150±3°C for PV22 series)

250±8 hours without loading. The trimmer potentiometer should be removed from the chamber, and maintained at a

temperature of 25±5°C for 1 to 2 hours.

Low Temperature Exposure

(Except for PVF2 and

PVM4A---D01)

12

The trimmer potentiometer should be placed in a chamber at a temperature of -55±3°C for 1 hours without loading.

Full rated continuous working voltage not exceeding the maximum rated voltage should be applied for 45 minutes.

The trimmer potentiometer should be removed from the chamber, and maintained at a temperature of 25±5°C for

approximately 24 hours.

Continued on the following page.

SMD Sealed Type/Lead Sealed Type Specifications and Test Methods

80

9

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11

Specifications and Test Methods

Resistor 1

End Terminal End Terminal Resistor 2 End TerminalEnd Terminal

DC supply

Figure 4

No.

Item Test Methods

Low Temperature Operation

(Only for PVF2 and

PVM4A---D01)

13 The trimmer potentiometer should be placed in a chamber at a temperature of -25±3°C (-55±3°C for PVM4A---

D01 series) 48±4 hours without loading. The trimmer potentiometer should be removed from the chamber, and main-

tained at a temperature of 25±5°C for 1-2 hours

Continued from the preceding page.

Rotational Life14

1)PV-- series

Full rated continuous working voltage not exceeding the maximum rated voltage should be applied with the circuit

shown in the figure. The adjustment rotor (screw) should be continuously cycled through not less than 90% of effec-

tive-electrical rotational angle (number of turns), at the rate of 1 cycle for 5 seconds minimum to 2.5 minutes maxi-

mum for total of 200 cycles.

2) PVG3, PVG5 series

The adjustment rotor (screw) should be continuously cycled though not less than 90% of effective-electrical rotation-

al angle (number of turns), at the rate of 1 cycle for 5 seconds minimum to 2.5 minutes maximum for a total of 50

(100 for PVG5) cycles, without loading.

3) PVF2, PVM4A---D01 series

The wiper should be rotated over 90% of the effective rotational angle without loading at a speed of 10 cycles per

minute, for 100 cycles continuously.

SMD Sealed Type/Lead Sealed Type Specifications and Test Methods

81

9

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R50E13.pdf 04.6.11