SENSOR SOLUTIONS /// 1210 03/2018
Page 1
1210
Standard
SPECIFICATIONS
PC Board Mountable Pressure Sensor
0-100 mV Output
Current Excitation
Gage, Absolute, and Differential
Temperature Compensated
The 1210 is a temperature compensated, piezoresistive
silicon pressure sensor packaged in a dual-in-line configuration.
It is intended for cost sensitive applications where excellent
performance and long-term stability are required.
Integral temperature compensation is provided over a
range of 0-50°C using laser-trimmed resistors. An additional
laser-trimmed resistor is included to normalize pressure
sensitivity variations by programming the gain of an external
differential amplifier. This provides sensitivity interchangeability
of ±1%. Gage, absolute, and differential pressure ranges from 0-
2 psi to 0-100 psi are available. Multiple lead and tube
configurations are available for specific applications.
Please refer to the 1210 1 psi datasheet for low pressure
applications. For voltage excitation, please refer to the Model
1220.
FEATURES
Dual-in-Line Package
0ºC to 50ºC Compensated
Temperature Range
±0.1% Non-Linearity
1.0% Interchangeable Span
(provided by gain set resistor)
Solid State Reliability
APPLICATIONS
Medical Instruments
Airspeed and Altitude Measurements
Process Control
Factory Automation
Vacuum Measurement
Handheld Calibrators
1210
Standard
SENSOR SOLUTIONS /// 1210 03/2018
Page 2
STANDARD RANGES
Range
psia
psid
psig
Port Styles
0 to 2
S, L, N, B*
0 to 5
S, L, N, B*
0 to 15
S, L, N
0 to 30
S, L, N,
0 to 50
S, L, N
0 to 100
S, L, N
*Barb port styles are only available in lead configuration type 3. See Ordering Information.
PERFORMANCE SPECIFICATIONS
Supply Current: 1.5mA
Ambient Temperature: 25°C (unless otherwise specified)
PARAMETERS
MIN
TYP
MAX
UNITS
NOTES
Span
75
100
150
mV
1
Span (2 psi version)
30
60
mV
1
Zero Pressure Output
-2
2
mV
Pressure Non Linearity
-0.1
±0.05
0.1
%Span
2
Pressure Hysteresis
-0.05
±0.01
0.05
%Span
Input & Output Resistance
2500
4400
6000
Ω
Temperature Error – Span
-0.5
±0.3
0.5
%Span
3
Temperature Error – Zero
-0.5
±0.1
0.5
%Span
3
Thermal Hysteresis – Zero
±0.1
%Span
3
Supply Current
1.5
2.0
mA
Response Time (10% to 90%)
1.0
ms
4
Output Noise (10Hz to 1kHz)
1.0
µV p-p
Long Term Stability (Offset & Span)
±0.1
%Span
5
Pressure Overload
3X
Rated
6
Compensated Temperature
0
50
°C
Operating Temperature
-40
+125
°C
Storage Temperature
-50
+150
°C
Weight
3
grams
Solder Temperature
250ºC Max 5 Sec.
Media
Non-Corrosive Dry Gases Compatible with Silicon, Pyrex,
RTV, Gold, Ceramic, Nickel, and Aluminum
Notes
1. Ratiometric to supply current.
2. Best fit straight line.
3. Maximum temperature error between 0°C and 50°C with respect to 25°C. For 2psi devices, Temperature Error -- Zero is ±1%.
4. For a zero-to-full scale pressure step change.
5. Long term stability over a one year period with constant current and temperature.
6. 2X maximum for 100psi device. 20psi maximum for 2 and 5psi devices.
Application Schema
1210
Standard
SENSOR SOLUTIONS /// 1210 03/2018
Page 3
DIMENSIONS
1210
Standard
SENSOR SOLUTIONS /// 1210 03/2018
Page 4
BARB DIMENSIONS
1210
Standard
SENSOR SOLUTIONS /// 1210 03/2018
Page 5
CONNECTIONS
APPLICATION SCHEMATIC
1210
Standard
SENSOR SOLUTIONS /// 1210 03/2018
Page 6
ORDERING INFORMATION
1210A – 030 A – 3 B
Pressure Range [psi]
002(1)
005(1)
015
030
050
100
Vent
L
Long Tube
S
Short Tube
N
No Tube
B
Barb
Fitting Type
3
Opposite Side as Vent Tube
1
Same Side as Vent Tube
Pressure Type
G
Gage
A
Absolute
D
Differential
TE.com/sensorsolutions
Measurement Specialties, Inc., a TE Connectivity company.
Measurement Specialties, TE Connectivity, TE Connectivity (logo) and EVERY CONNECTION COUNTS are trademarks. All other logos, products and/or company names referred to herein
might be trademarks of their respective owners.
The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes
no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard
Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse
of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application.
© 2015 TE Connectivity Ltd. family of companies All Rights Reserved.
NORTH AMERICA
EUROPE
ASIA
Measurement Specialties, Inc.,
a TE Connectivity company
Tel: +1 800-522-6752
customercare.frmt@te.com
MEAS Switzerland Sarl,
a TE Connectivity company
Tel: +31 73 624 6999
customercare.bevx@te.com
Measurement Specialties (China) Ltd.,
a TE Connectivity company
Tel: +86 0400-820-6015
mailto:customercare.shzn@te.com
(1) : Not available in Absolute Pressure Type
Barb port styles are only available in lead configuration type 3.
