FRDM STBCA8471 FRDM STBCA8471 FRDMSTBC-A8471 For more information, visit freescale.com/ sensortoolbox Freescale and the Freescale logo are trademarks of Freescale Semiconductor, Inc., Reg. U.S. Pat. & Tm. Off. All other product or service names are the property of their respective owners. (c) 2015 Freescale Semiconductor, Inc. FRDMSTBCA8471QRC REV 1 920-28984 REV A Get Started Download tools and documentation under Jump-Start Your Design at freescale.com/ sensortoolbox Quick Reference Card 3-Axis Sensor Toolbox Development Board FXLS8471Q 3-axis linear accelerometer FREESCALE FREEDOM PLATFORM 2 Connect the FRDMSTBC-A8471 development board to a Freescale Freedom development board, such as the FRDM-KL25Z (or any Arduino R3 compatible board). Refer to the Freescale Freedom development board Quick Start Guide for driver information. FXLS8471Q 3-axis linear accelerometer 16 QFN (3 mm x 3 mm x 1 mm) INT1 - 3 INT2 -1 3 Plug one end of a USB cable into the SDA port on the assembly. Plug the other end of the cable into the USB port on the computer. 4 Download and install the latest Sensor Toolbox software at: freescale.com/sensortoolbox 5 Start the Sensor Toolbox software. SA1/CS - 3 SDA/MOSI - 4 SA0/MISO - 5 SPI/I2C_CLK - 6 6 - I2C_SCL1 5 - I2C_SDA1 4 - RST_GPIO 6 - GND 4 - VDD 3 - RST_MCU I2C_SDA0 - 9 I2C_SCL0 - 10 Through hole pins (12 places) Test points (12 places) Learn more at freescale.com/sensortoolbox Verify package contents: FRDMSTBC-A8471 development board Get to Know the FRDMSTBC-A8471 1