HC/49US (AT49) LOW PROFILE SURFACE MOUNT MICROPROCESSOR CRYSTAL ABLS2 Pb RoHS Compliant FEATURES: * Suitable for reflow * Low height reduced to 3.3mm * Suitable for thin equipment * Tight stability & extended temperature Reduced height to 3.3mm 11.4 x 4.7 x 3.3 mm | | | | | | | | | | | | | | | APPLICATIONS: * Computers, Modems, Microprocessors * Automotive and Industrial * * Wireless Applications STANDARD SPECIFICATIONS: PARAMETERS TABLE 1: ESR ABRACON P/N FREQUENCY (MHz) 3.579 - 4.999 (Fund.) 5.000 - 5.999 (Fund.) 6.000 - 7.999 (Fund.) 8.000 - 8.999 (Fund.) 9.000 - 9.999 (Fund.) 10.000 - 15.999 (Fund.) 16.000 - 50.000 (Fund.) 24.01 - 31.999 (3rd O/T) 32.000 - 75.00 (3rd O/T) ABLS2 Series ESR (?? ) 180 120 100 80 60 50 40 100 80 Frequency 3.579545 MHz to 75 MHz Operation Mode AT cut (Fundamental or 3rd OT) or BT cut (See options) 3.579545MHz - 24.0MHz (Fundamental) (Standard) 24.01 - 75.00MHz (3rd- Overtone) (Standard) 24.01MHz - 50.00MHz (Fund. AT or BT) (See options) Operating Temperature 0C to + 70C (see options) Storage Temperature - 55C to + 125C Frequency Tolerance at +25C 50 ppm max. (see options) * Change in frequency (Maximum - Minimum) Frequency Stability over the Op erating Temp. (Ref to +25C) 50 ppm max. (see options) * Change in ESR (Maximum - Minimum) over Equivalent Series Resistance See Table 1 Shunt Capacitance C 0 7pF max. Load Capacitance CL 18pF (see options) Drive Level 1 mW max., 100W typical Aging at 25C 3C Per Year 5ppm max. Insulation Resistance 500 M min at 100Vdc 15V Drive level dependency (DLD) from 1W to 500W (minimum 7 points tested) over DLD range < 10ppm DLD range < 25% of Max ESR value * Maximum ESR over DLD range < Max ESR value OPTIONS & PART IDENTIFICATION: (Left blank if standard) ABLS2 - Frequency Frequency XX.XXXX MHz Load Capacitance Please specify CL in pF or S for Series (minimun 10pF) ESR RXXX (Value in ) NOTE: Fundamental BT frequency stability 100ppm max.at -10 C to +60 C only. * Frequency stability 50ppm, 100ppm, 150ppm only. Contact ABRACON for tighter frequency stability. ** -10 to +60C only. ABRACON IS ISO 9001 / QS 9000 CERTIFIED -R - Operating Temp. A -10C to +60C B -20C to +70C C -30C to +70C N -30C to +85C D -40C to +85C J* -40C to +105C K* -40C to +125C L* -55C to +125C Freq. Tolerance H5 5 ppm 1 10 ppm 7 15 ppm 2 20 ppm 3 25 ppm 4 30 ppm - - - Packaging T for Tape and Reel Mode F for Fund. AT>24MHz FB for Fund BT>24MHz Freq. Stability U** 10 ppm G 15 ppm X 20 ppm W 25 ppm Y 30 ppm H 35 ppm Q 100 ppm R 150 ppm Visit www.abracon.com for Terms & Conditions of Sale Revised: 08.20.10 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com HC/49US (AT49) LOW PROFILE SURFACE MOUNT MICROPROCESSOR CRYSTAL ABLS2 Pb RoHS Compliant Reduced height to 3.3mm 11.4 x 4.7 x 3.3 mm | | | | | | | | | | | | | | | OUTLINE DRAWING: Dimensions: Inches (mm) TAPE & REEL: REFLOW PROFILE: Dimensions: mm ATTENTION: Abracon Corporation's products are COTS - Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon's products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO 9001 / QS 9000 CERTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 08.20.10 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com