|||||||||||||||
ABLS2
APPLICATIONS:
FEATURES:
11.4 x 4.7 x 3.3 mm
Pb
RoHS
Compliant
ABRACON IS
ISO 9001 / QS 9000
CERTIFIED
ABRACON IS
ISO 9001 / QS 9000
CERTIFIED
STANDARD SPECIFICATIONS:
• Suitable for reflow
• Suitable for thin equipment
• Low height reduced to 3.3mm
• Tight stability & extended temperature
• Computers, Modems, Microprocessors
• Automotive and Industrial *
• Wireless Applications
OPTIONS & PART IDENTIFICATION:
(Left blank if standard)
HC/49US (AT49) LOW PROFILE SURFACE
MOUNT MICROPROCESSOR CRYSTAL
30332
Esperanza, Rancho Santa Margarita, California
92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
Revised: 08.20.10
Visit www.abracon.com for Terms & Conditions of Sale
A-10°C to +60°C
B-20°C to +70°C
C-30°C to +70°C
N-30°C to +85°C
D-40°C to +85°C
J* -40°C to +105°C
K* -40°C to +125°C
L* -55°C to +125°C U** ± 10 ppm
G ± 15 ppm
H5 ± 5 ppm X ± 20 ppm
NOTE: Fundamental BT frequency stability 1 ± 10 ppm W ± 25 ppm
± 100ppm max.at -10° C to +60° C only. 7 ± 15 ppm Y ± 30 ppm
* Frequency stability ±50ppm, ±100ppm, ±150ppm only. 2 ± 20 ppm H ± 35 ppm
Contact ABRACON for tighter frequency stability. 3 ± 25 ppm Q ± 100 ppm
** -10 to +60C only. 4 ± 30 ppm R ± 150 ppm
ESR
Please specify CL in pF or S for
Series (minimun 10pF)
Packaging
Mode
FB for Fund BT>24MHz
F for Fund. AT>24MHz
T for Tape and Reel
ABLS2 - Frequency - - R - - - - -
.pmeTgnitarepOycneuqerF
Freq. Stability
XX.XXXX MHz
Load Capacitance
Freq. Tolerance
RXXX (Value in Ω)
Drive level dependency (DLD) from 1µW to 500µW
(minimum 7 points tested)
•
Change in frequency (Maximum - Minimum)
over DLD range < ±10ppm
•
Change in ESR (Maximum - Minimum) over
DLD range < 25% of Max ESR value
•
Maximum ESR over DLD range < Max ESR
value
TABLE 1: ESR ESR (??)
3.579 - 4.999 (Fund.) 180
5.000 - 5.999 (Fund.) 120
6.000 - 7.999 (Fund.) 100
8.000 - 8.999 (Fund.) 80
9.000 - 9.999 (Fund.) 60
10.000 - 15.999 (Fund.) 50
16.000 - 50.000 (Fund.) 40
24.01 - 31.999 (3rd O/T) 100
32.000 - 75.00 (3rd O/T) 80
FREQUENCY (MHz)
Frequency Tolerance at +25°C
Frequency Stability over the
Operating Temp. (Ref to +25°C)
PARAMETERS
3.579545 MHz to 75 MHz
± 50 ppm max. (see options)
Frequency
ABRACON P/N ABLS2 Series
Operation Mode
Operating Temperature
Storage Temperature - 55°C to + 125°C
0°C to + 70°C (see options)
± 50 ppm max. (see options)
Equivalent Series Resistance
Shunt Capacitance C
0
Load Capacitance C
L
Drive Level
Aging at 25°C ± 3°C Per Year
Insulation Resistance
See Table 1
18pF (see options)
1 mW max., 100µW typical
500 M min at 100Vdc ± 15V
7pF max.
± 5ppm max.
Ω
Reduced height
to 3.3mm
AT cut (Fundamental or 3rd OT) or BT cut (See options)
3.579545MHz - 24.0MHz (Fundamental) (Standard)
24.01 - 75.00MHz (3rd- Overtone) (Standard)
24.01MHz - 50.00MHz (Fund. AT or BT) (See options)
||||||||||||| | |
ABLS2
11.4 x 4.7 x 3.3 mm
Pb
RoHS
Compliant
ABRACON IS
ISO 9001 / QS 9000
CERTIFIED
ABRACON IS
ISO 9001 / QS 9000
CERTIFIED
30332
Esperanza, Rancho Santa Margarita, California
92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
Revised: 08.20.10
Visit www.abracon.com for Terms & Conditions of Sale
HC/49US (AT49) LOW PROFILE SURFACE
MOUNT MICROPROCESSOR CRYSTAL
Dimensions: Inches (mm)
OUTLINE DRAWING:
Dimensions: mm
TAPE & REEL:
Reduced height
to 3.3mm
REFLOW PROFILE:
ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are
not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property.
For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon
Corporation for more information.
