Hyper Mini TOPLED(R) Hyper-Bright Low Current LED Lead (Pb) Free Product - RoHS Compliant LS M67K, LO M67K, LY M67K Besondere Merkmale Features * Gehausetyp: weies SMT-Gehause, farbloser klarer Verguss * Besonderheit des Bauteils: kleine Bauform 2,3 mm x 1,3 mm x 1,4 mm * Wellenlange: 630 nm (super-rot), 606 nm (orange), 587 nm (gelb) * Abstrahlwinkel: Lambertscher Strahler (120) * Technologie: InGaAlP * optischer Wirkungsgrad: 6 lm/W (gelb), 5 lm/W (super-rot), 9 lm/W (orange) * Gruppierungsparameter: Lichtstarke, Wellenlange * Verarbeitungsmethode: fur alle SMT-Bestucktechniken geeignet * Lotmethode: IR Reflow Loten und Wellenloten (TTW) * Vorbehandlung: nach JEDEC Level 2 * Gurtung: 8-mm Gurt mit 3000/Rolle, o180 mm oder 12000/Rolle, o330 mm * ESD-Festigkeit: ESD-sicher bis 2 kV nach * package: white SMT package, colorless clear resin * feature of the device: small package 2.3 mm x 1.3 mm x 1.4 mm * wavelength: 630 nm (super-red), 606 nm (orange), 587 nm (yellow) * viewing angle: Lambertian Emitter (120) * technology: InGaAlP * optical efficiency: 6 lm/W (yellow), 5 lm/W (super-red), 9 lm/W (orange) * grouping parameter: luminous intensity, wavelength * assembly methods: suitable for all SMT assembly methods * soldering methods: IR reflow soldering and TTW soldering * preconditioning: acc. to JEDEC Level 2 * taping: 8 mm tape with 3000/reel, o180 mm or 12000/reel, o330 mm * ESD-withstand voltage: up to 2 kV acc. to JESD22-A114-B JESD22-A114-B Anwendungen * Informationsanzeigen im Innenbereich * optischer Indikator * Einkopplung in Lichtleiter * Hinterleuchtung (LCD, Schalter, Tasten, Displays, Werbebeleuchtung, Allgemeinbeleuchtung) * Innenbeleuchtung im Automobilbereich (z.B. Instrumentenbeleuchtung, u.a.) 2006-03-20 Applications * indoor displays * optical indicators * coupling into light guides * backlighting (LCD, switches, keys, displays, illuminated advertising, general lighting) * interior automotive lighting (e.g. dashboard backlighting, etc.) 1 LS M67K, LO M67K, LY M67K Bestellinformation Ordering Information Lichtstarke1) Seite 15 Luminous Intensity1) page 15 IF = 2 mA IV (mcd) Lichtstrom2) Seite 15 Luminous Flux2) page 15 IF = 2 mA V (mlm) Typ Type Emissionsfarbe Color of Emission LS M67K-H2K1-1 LS M67K-J2L1-1 LS M67K-H2L1-1 super-red 3.55 ... 9.00 5.60 ... 14.00 3.55 ... 14.00 18 (typ.) 28 (typ.) 25 (typ.) Q65110A2026 Q65110A2027 Q65110A2028 LO M67K-J2L1-24 LO M67K-K2M1-24 LO M67K-J2M1-24 orange 5.60 ... 14.00 9.00 ... 22.40 5.60 ... 22.40 28 (typ.) 45 (typ.) 40 (typ.) Q65110A2053 Q65110A2054 Q65110A2055 LY M67K-J1K2-26 LY M67K-K1L2-26 LY M67K-J1L2-26 yellow 4.50 ... 11.20 7.10 ... 18.00 4.50 ... 18.00 22 (typ.) 35 (typ.) 30 (typ.) Q65110A2074 Q65110A2075 Q65110A2076 Anm.: Bestellnummer Ordering Code Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen Helligkeitsgruppen (siehe Seite 5 fur nahere Informationen). Es wird nur eine einzige Helligkeitsgruppe pro Gurt geliefert. Z.B.: LO M67K-J2L1-24 bedeutet, dass auf dem Gurt nur eine der Helligkeitsgruppen J2, K1, K2 oder L1 enthalten ist. Um die Liefersicherheit zu gewahrleisten, konnen einzelne Helligkeitsgruppen nicht bestellt werden. Gleiches gilt fur die Farben, bei denen Wellenlangengruppen gemessen und gruppiert werden. Pro Gurt wird nur eine Wellenlangengruppe geliefert. Z.B.: LO M67K-J2L1-24 bedeutet, dass auf dem Gurt nur eine der Wellenlangengruppen -2, -3, oder -4 enthalten ist (siehe Seite 5 fur nahere Information). LS M67K-H2K1-1 bedeutet, dass das Bauteil innerhalb der auf Seite 4 spezifizierten Grenzen geliefert wird. Um die Liefersicherheit zu gewahrleisten, konnen einzelne Wellenlangengruppen nicht bestellt werden. Note: The above Type Numbers represent the order groups which include only a few brightness groups (see page 5 for explanation). Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). E.g. LO M67K-J2L1-24 means that only one group J2, K1, K2 or L1 will be shippable for any one reel. In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. E.g. LO M67K-J2L1-24 means that only 1 wavelength group -2, -3, or -4 will be shippable (see page 5 for explanation). LS M67K-H2K1-1 means that the device will be shiped within the specified limits as stated on page 4. In order to ensure availability, single wavelength groups will not be orderable.I Vergleichstabelle fur 10 mA Correlation Table for 10 mA Typ Type Emissionsfarbe Color of Emission IF = 2 mA Lichtstarke1) Lichtstarke2) Lichtstrom2) Seite 15 Seite 15 Seite 15 Luminous Intensity1) page 15 IF = 2 mA IV (mcd) Luminous Intensity2) page 15 IF = 10 mA IV (mcd) Luminous Flux2) page 15 IF = 10 mA V (mlm) LS M67K-H2K1-1 LS M67K-J2L1-1 LS M67K-H2L1-1 super-red 3.55 ... 9.00 5.60 ... 14.00 3.55 ... 14.00 32 (typ.) 50 (typ.) 45 (typ.) 95 (typ.) 150 (typ.) 135 (typ.) LO M67K-J2L1-24 LO M67K-K2M1-24 LO M67K-J2M1-24 orange 5.60 ... 14.00 9.00 ... 22.40 5.60 ... 22.40 50 (typ.) 80 (typ.) 70 (typ.) 150 (typ.) 240 (typ.) 215 (typ.) LY M67K-J1K2-26 LY M67K-K1L2-26 LY M67K-J1L2-26 yellow 4.50 ... 11.20 7.10 ... 18.00 4.50 ... 18.00 40 (typ.) 65 (typ.) 55 (typ.) 120 (typ.) 190 (typ.) 170 (typ.) Siehe auch Grafik auch Seite 7 / Please see also graph on page 7 2006-03-20 2 LS M67K, LO M67K, LY M67K Grenzwerte Maximum Ratings Bezeichnung Parameter Symbol Symbol Werte Values LS, LO Einheit Unit LY Betriebstemperatur Operating temperature range Top - 40 ... + 100 C Lagertemperatur Storage temperature range Tstg - 40 ... + 100 C Sperrschichttemperatur Junction temperature Tj + 125 C Durchlassstrom Forward current (TA=25C) IF 20 mA Stostrom Surge current t 10 s, D = 0.005, TA=25C IFM 100 mA Sperrspannung3) Seite 15 Reverse voltage3) page 15 (TA=25C) VR 12 V Leistungsaufnahme Power consumption (TA=25C) Ptot 40 mW Rth JA 530 K/W Rth JS 280 K/W Warmewiderstand Thermal resistance Sperrschicht/Umgebung4) Seite 15 Junction/ambient4) page 15 Sperrschicht/Lotpad Junction/solder point 2006-03-20 3 LS M67K, LO M67K, LY M67K Kennwerte Characteristics (TA = 25 C) Bezeichnung Parameter Wellenlange des emittierten Lichtes Wavelength at peak emission IF = 2 mA Symbol Symbol (typ.) Dominantwellenlange5) Seite 15 Dominant wavelength5) page 15 IF = 2 mA Werte Values Einheit Unit LS LO LY peak 643 610 591 nm dom 630 6 606* 587* nm -6/+3 -7/+8 Spektrale Bandbreite bei 50 % Irel max Spectral bandwidth at 50 % Irel max IF = 2 mA (typ.) 16 16 15 nm Abstrahlwinkel bei 50 % IV (Vollwinkel) Viewing angle at 50 % IV (typ.) 2 120 120 120 Grad deg. Durchlassspannung6) Seite 15 Forward voltage6) page 15 IF = 2 mA (min.) (typ.) (max.) VF VF VF 1.7 1.8 2.2 1.7 1.8 2.2 1.7 1.8 2.2 V V V Sperrstrom Reverse current VR = 12 V (typ.) (max.) IR IR 0.01 10 0.01 10 0.01 10 A A Temperaturkoeffizient von peak Temperature coefficient of peak IF = 2 mA; -10C T 100C (typ.) TCpeak 0.14 0.14 0.12 nm/K Temperaturkoeffizient von dom Temperature coefficient of dom IF = 2 mA; -10C T 100C (typ.) TCdom 0.05 0.09 0.09 nm/K Temperaturkoeffizient von VF Temperature coefficient of VF IF = 2 mA; -10C T 100C (typ.) TCV - 1.8 - 1.5 - 2.1 mV/K Optischer Wirkungsgrad Optical efficiency IF = 2 mA (typ.) opt 5 9 6 lm/W * Einzelgruppen siehe Seite 5 Individual groups on page 5 2006-03-20 4 LS M67K, LO M67K, LY M67K Wellenlangengruppen (Dominantwellenlange)5) Seite 15 Wavelength Groups (Dominant Wavelength)5) page 15 Gruppe Group yellow orange Einheit Unit min. max. min. max. 2 580 583 600 603 nm 3 583 586 603 606 nm 4 586 589 606 609 nm 5 589 592 nm 6 592 595 nm . Helligkeits-Gruppierungsschema Brightness Groups Helligkeitsgruppe Brightness Group Lichtstarke1) Seite 15 Luminous Intensity1) page 15 IV (mcd) H2 J1 J2 K1 K2 L1 L2 M1 3.55 ... 4.50 4.50 ... 5.60 5.60 ... 7.10 7.10 ... 9.00 9.00 ...11.20 11.20 ...14.00 14.00 ...18.00 18.00 ...22.40 Lichtstrom2) Seite 15 Luminous Flux2) page 15 V (mlm) 12 (typ.) 15 (typ.) 19 (typ.) 24 (typ.) 30 (typ.) 40 (typ.) 50 (typ.) 60 (typ.) Anm.: Die Standardlieferform von Serientypen beinhaltet entweder eine untere Familiengruppe, eine obere Familiengruppe oder eine Sammelgruppe, die aus nur 4 bzw. 6 Helligkeitsgruppen bestehen. Einzelne Helligkeitsgruppen sind nicht bestellbar. Note: The standard shipping format for serial types includes either a lower familiy group, an upper family group or a grouping of all individual groups of 4 or 6 brightness groups. Individual brightness groups cannot be ordered. Gruppenbezeichnung auf Etikett Group Name on Label Beispiel: K2-3 Example: K2-3 Helligkeitsgruppe Brightness Group Wellenlange Wavelength K2 3 Anm.: In einer Verpackungseinheit / Gurt ist immer nur eine Gruppe fur jede Selektion enthalten. Note: No packing unit / tape ever contains more than one group for each selection. 2006-03-20 5 LS M67K, LO M67K, LY M67K Relative spektrale Emission2) Seite 15 Relative Spectral Emission2) page 15 V() = spektrale Augenempfindlichkeit / Standard eye response curve Irel = f (), TA = 25 C, IF = 2 mA OHL00555 100 % rel orange super-red 80 V yellow 60 40 20 0 400 450 500 550 600 650 nm 700 Abstrahlcharakteristik2) Seite 15 Radiation Characteristic2) page 15 Irel = f (); TA = 25 C 40 30 20 10 0 50 OHL01660 1.0 0.8 0.6 60 0.4 70 0.2 80 0 90 100 1.0 2006-03-20 0.8 0.6 0.4 0 20 6 40 60 80 100 120 LS M67K, LO M67K, LY M67K Durchlassstrom2) Seite 15 Forward Current2) page 15 IF = f (VF); TA = 25 C Relative Lichtstarke2) 7) Seite 15 Relative Luminous Intensity2) 7) page 15 IV/IV(2 mA) = f (IF); TA = 25 C OHL00388 10 2 mA OHL00376 10 2 IV IF I V (2 mA) super-red orange yellow 10 1 10 1 10 0 5 10 -1 10 0 5 10 -2 10 -3 1.4 1.6 1.8 2.0 2.2 10 -1 10 0 V 2.6 10 1 5 10 2 mA IF VF 2) Seite 15 Relative Lichtstarke Relative Luminous Intensity2) page 15 IV/IV(25 C) = f (Tj); IF = 2 mA OHL00290 2.5 V V (25 C) 1.5 1.0 0.5 0.0 -60 -40 -20 0 20 40 60 C 100 Tj 2006-03-20 7 LS M67K, LO M67K, LY M67K Maximal zulassiger Durchlassstrom Max. Permissible Forward Current I F = f (T ) IF OHL02444 25 mA TS 20 TA 15 10 5 0 0 20 40 60 80 C 100 TA Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 25 C 0.12 IF A OHL02442 tP D= T 0.10 0.08 0.06 0.04 Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 85 C 0.12 IF A tP IF T tP D= T 0.10 D= 0.08 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0.06 0.04 0.02 tP IF T D= 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0.02 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp 2006-03-20 OHL02442 tp 8 LS M67K, LO M67K, LY M67K Mazeichnung8) Seite 15 Package Outlines8) page 15 0.15 (0.006) 0.8 (0.031) 0.05 (0.002) Cathode marking A 0.5 (0.020) 0.3 (0.012) 1.0 (0.039) 1.9 (0.075) 2.3 (0.091) 2.1 (0.083) 2.1 (0.083) 1.4 (0.055) 1.2 (0.047) 0.71 (0.028) Light emitting area typ. 1.5 (0.059) x 1.0 (0.039) C 1.5 (0.059) 1.3 (0.051) Cathode marking GPLY6928 Kathodenkennung: Cathode mark: Gewicht / Approx. weight: abgeschragte Ecke bevelled edge 10 mg Gurtung / Polaritat und Lage8) Seite 15 Verpackungseinheit 3000/Rolle, o180 mm oder 12000/Rolle, o330 mm Method of Taping / Polarity and Orientation8) page 15 Packing unit 3000/reel, o180 mm or 12000/reel, o330 mm 4 (0.157) Cathode/Collector Side 2 (0.079) 1.55 (0.061) 2.35 (0.093) 8 (0.315) 1.75 (0.069) 3.5 (0.138) 1.5 (0.059) 4 (0.157) OHAY0225 2006-03-20 9 LS M67K, LO M67K, LY M67K Empfohlenes Lotpaddesign8) 9) Seite 15 Recommended Solder Pad8) 9) page 15 IR Reflow Loten IR Reflow Soldering 0.8 (0.031) 1 (0.039) 2.8 (0.110) 2.8 (0.110) 1 (0.039) 0.8 (0.031) Padgeometrie fur verbesserte Warmeableitung Paddesign for improved heat dissipation Cu-Flache > 16 mm 2 Cu-area > 16 mm 2 Lotstopplack Solder resist 2006-03-20 OHLPY978 10 LS M67K, LO M67K, LY M67K Lotbedingungen Soldering Conditions Vorbehandlung nach JEDEC Level 2 Preconditioning acc. to JEDEC Level 2 IR-Reflow Lotprofil fur bleifreies Loten IR Reflow Soldering Profile for lead free soldering (nach J-STD-020B) (acc. to J-STD-020B) OHLA0687 300 Maximum Solder Profile Recommended Solder Profile Minimum Solder Profile C T 255 C 240 C 250 C 260 C +0 -5 C 245 C 5 C C 235 C +5 -0 C 217 C 10 s min 200 30 s max Ramp Down 6 K/s (max) 150 100 s max 120 s max 100 Ramp Up 3 K/s (max) 50 25 C 0 0 50 100 150 200 250 s 300 t Wellenloten (TTW) TTW Soldering (nach CECC 00802) (acc. to CECC 00802) OHLY0598 300 C T 10 s 250 Normalkurve standard curve 235 C ... 260 C Grenzkurven limit curves 2. Welle 2. wave 200 1. Welle 1. wave 150 ca 200 K/s 2 K/s 5 K/s 100 C ... 130 C 100 2 K/s 50 Zwangskuhlung forced cooling 0 0 50 100 150 200 t 2006-03-20 11 s 250 LS M67K, LO M67K, LY M67K Barcode-Produkt-Etikett (BPL) Barcode-Product-Label (BPL) OSRAM Opto Lx xxxx Bin1: Bin Information Color 1 Bin2: Product Name Bin3: pl e Semiconductors RoHS Compliant ML Temp ST 2 260 C RT (6P) BATCH NO: Batch Number Bar Code Additional TEXT (9D) D/C: Date Code Sa m (1T) LOT NO: Lot Number R077 Bar Code (X) PROD NO: Product Code (Q)QTY: Product Quantity per Reel DEMY PACKVAR: Packing Type (G) GROUP: X - X - X Bar Code Forward Voltage Group Wavelength Group Brightness Group OHA12043 Gurtverpackung Tape and Reel W1 D0 P0 A N F W E 13.0 0.25 P2 Label P1 Direction of unreeling Direction of unreeling W2 Gurtvorlauf: 400 mm 400 mm Leader: Gurtende: Trailer: 160 mm 160 mm OHAY0324 Tape dimensions in mm (inch) W 8 + 0.3 - 0.1 P0 P1 P2 D0 E F 4 0.1 4 0.1 2 0.05 1.5 + 0.1 1.75 0.1 3.5 0.05 (0.157 0.004) (0.157 0.004) (0.079 0.002) (0.059 + 0.004) (0.069 0.004) (0.138 0.002) Reel dimensions in mm (inch) A W Nmin W1 W2 max 180 (7) 8 (0.315) 60 (2.362) 8.4 + 2 (0.331 + 0.079) 14.4 (0.567) 330 (13) 8 (0.315) 60 (2.362) 8.4 + 2 (0.331 + 0.079) 14.4 (0.567) 2006-03-20 12 LS M67K, LO M67K, LY M67K Trockenverpackung und Materialien Dry Packing Process and Materials Moisture-sensitive label or print Barcode label L VE el LE see . lab e H) nk, bla cod (R If y bar . dit RH mi % hu e /60 ve ed ag C ati rar ck rel 30 RS _ < inf pa % ins VE of to ak ITI TO 90 urs nta d ). < ns (pe or urs d co NSUC Ho de , cte itio urs g SEND Ho an bje ing co C 72 nd Ho urs 5 ba E CO te 48 C su ss e Ho co is UR ce 24 6 da e y MI 40 be tim h C e ThISTSE l pro tor < tim or ). 23 tim e at t wilntC or l wit fac MO Flo tim TO s at or ca at re. Flo d tha ale el or nth OP nti Flo uiv du if: rea es l 4 5 Flo lab mo ide ce eq low g, l ve vic is be or de 24 tin en l 5a6 pro ve Le de , e te co , g: ve l un wh Le ke r se da ure ba ed low ba Le ve mo % ba e al ure Le ist en ref e e 10 tim ure se for ist ale op se for > Mo , se 3 ist ure is or . , is ha se Mo nk be ist nk rd g -03 Mo in Flo r-p RH g, bla Mo ba TD po If bla hin % kin Ca (if life s ar t. s wit 10 ba tor J-S thi, va p. elf Ye ar ek _ < e icat me , C 1 urs Ye er tem ted Sh at ed low uir > 1 WeHo un Aft Indno uir DE 1. e 4 8 ref dy red reqy is 2. bo e Mo /JE tim dit2b 16 req : e a) Sto es tim or mi IPC ed or g is tim e vic b) or e Hu Flo en tim or De 2a kin nc te Flo a) op or 3. b) baere Flo da e l 1 2 Flo If al ref tim ve l 4. se d l 2a3 ve Le g an ve l Le Ba te ure Le ve ure Le ist Da ure ist Mo ist ure Mo ist Mo Mo N TIO U A C O S R A M d Humidity indicator Barcode label Please check the HIC immidiately after bag opening. Discard if circles overrun. Avoid metal contact. Do not eat. Comparator check dot WET If wet, examine units, if necessary bake units 15% If wet, examine units, if necessary bake units 10% If wet, parts still adequately dry. change desiccant 5% Humidity Indicator MIL-I-8835 Desiccant OSR AM OHA00539 Anm.: Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und einer Feuchteindikatorkarte Bezuglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im Kapitel "Gurtung und Verpackung" unter dem Punkt "Trockenverpackung". Hier sind Normenbezuge, unter anderem ein Auszug der JEDEC-Norm, enthalten. Note: Moisture-senisitve product is packed in a dry bag containing desiccant and a humidity card. Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter "Tape and Reel" under the topic "Dry Pack". Here you will also find the normative references like JEDEC. Kartonverpackung und Materialien Transportation Packing and Materials Barcode label L VE el LE see . lab e H) nk, (R bla cod If y bar . dit RH mi % hu e /60 ve ed ag C ati rar ck rel 30 _ < inf pa % of to ak 90 urs d ). < ns (pe or d Ho urs de , cte itio Ho urs an bje ing co C 72 nd Ho urs 5 te 48 C su ss e Ho co ce 24 6 da y 40 be tim e e C h l pro < tor tim or e ). wit 23 tim at t wilnt l or fac C Flo s tim at or ca ale at re. Flo d or el nth tha nti Flo uiv du 4 if: rea es l Flo lab mo ide 5 ce eq low g, ve l vic 5a is be or de 24 tin en pro 6 Le ve l de , e te co , g: un wh Le ve l ke r se da ure ba ed low Le ve mo % ba e ba al d Le ist ure en ref e e 10 tim se for ist ure ale op se for > , Mo se 3 ist ure is or . , se is ha Mo nk be ist nk rd g -03 Mo in Flo r-p RH g, bla Mo ba Ca TD po If bla hin % kin life s (if ar s p. wit 10 ba tor t. J-S thi, va elf Ye ar ek _ < e icat me , C 1 urs Ye Sh terlow tem ted at ed uir > 1 WeHo un Af Indno uir DE dy 1. d e 4 ref 8 reqy is JE 2. bo Mo ore tim e e 16 req : C/ es dit2b a) St tim or mi is e ed or g e IP tim vic b) or Hu Flo en tim or De 2a kin nc te Flo a) op or 3. b) baere Flo da e 1 l Flo If al ref tim ve l 2 2a 4. se d 3 Le ve l g an Le ve l Ba te ure Le ve Le ist ure Da ist ure Mo ist ure Mo ist Mo Mo N VE RS IO insITI TO T ntaNSUC U g coSEND CO Ais baRE TU MI CThIS SE DE MY R1 8 Q -1 P1+ GR OU P: M ul LS ti Y TO T6 PL 76 s 01 44 D/ C: 00 O pt or o ct du (9D ) 4 NO : (Q )Q TY : 20 O S m RA ic M on Se 3G H1 23 25 014 110 (X ) PR OD NO : (1T ) LO T (6P ) NO : 12 BA TC H 8 2199 2100 (G ) Muster ED Bin Bin 1: Bin 2: P3: Q- 1-2 ML 1-2 0 2 0 Te 2a 22 mp 3 24 0 ST Ad 26 0 C R 0 C R0 dit ion C R RT PA 77 al CK TE VA XT R: MO TO OP D/C : 01 (9D ) P1+ Q -1 DE MY R1 8 GR OU P: 00 44 M ul LS ti Y TO T6 PL 76 : (Q )Q TY : 20 O Se S m RA ic M on du O ct pto or NO s 3G H1 23 4 25 014 110 O SR AM (X) PR OD NO : (1T ) LO T (6P ) NO : 12 BA TC H 998 021 210 (G ) Muster ED Bin Bin 1: Bin 2: P-1 3: Q- -20 ML 1-2 2 0 Te 2a 22 mp 3 24 0 ST Ad 26 0 C R 0 C R0 dit ion C R RT PA 77 al CK TE VA XT R: Barcode label Packing Sealing label OHA02044 2006-03-20 13 LS M67K, LO M67K, LY M67K Revision History: 2007-03-01 Previous Version: 2004-10-11 Page Subjects (major changes since last revision) Date of change 8 new pulse diagrams (OHL00827=>OHL02442, OHL00828=>OHL02442) 2004-08-11 8 new diagram max. perm. forward current (OHL00429=>OHL02444) 2004-08-11 5 value: min. forward voltage 2004-12-02 Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components10) page 15 may only be used in life-support devices or systems11) page 15 with the express written approval of OSRAM OS. 2006-03-20 14 LS M67K, LO M67K, LY M67K Funoten: 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) Remarks: 1) Brightness groups are tested at a current pulse duration of 25 ms and a tolerance of 11%. Helligkeitswerte werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 11% ermittelt. Wegen der besonderen Prozessbedingungen bei der Herstellung von LED konnen typische oder abgeleitete technische Parameter nur aufgrund statistischer Werte wiedergegeben werden. Diese stimmen nicht notwendigerweise mit den Werten jedes einzelnen Produktes uberein, dessen Werte sich von typischen und abgeleiteten Werten oder typischen Kennlinien unterscheiden konnen. Falls erforderlich, z.B. aufgrund technischer Verbesserungen, werden diese typischen Werte ohne weitere Ankundigung geandert. Die LED kann kurzzeitig in Sperrichtung betrieben werden. RthJA ergibt sich bei Montage auf PC-Board FR 4 (Padgroe 5 mm2 je Pad) Wellenlangen werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 1 nm ermittelt. Spannungswerte werden mit einer Stromeinpragedauer von 1 ms und einer Genauigkeit von 0,1 V ermittelt. Im gestrichelten Bereich der Kennlinien muss mit erhohten Helligkeitsunterschieden zwischen Leuchtdioden innerhalb einer Verpackungseinheit gerechnet werden Mae werden wie folgt angegeben: mm (inch) Gehause halt TTW-Lothitze aus Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems fuhren wird oder die Sicherheit oder Effektivitat dieses Apparates oder Systems beeintrachtigt. Lebenserhaltende Apparate oder Systeme sind fur (a) die Implantierung in den menschlichen Korper oder (b) fur die Lebenserhaltung bestimmt. Falls sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist. 2) 3) 4) 5) 6) 2006-03-20 7) In the range where the line of the graph is broken, you must expect higher brightness differences between single LEDs within one packing unit. 8) Dimensions are specified as follows: mm (inch) Package able to withstand TTW-soldering heat A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. 9) 10) 11) Published by OSRAM Opto Semiconductors GmbH Wernerwerkstrasse 2, D-93049 Regensburg www.osram-os.com (c) All Rights Reserved. 15 Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. Driving the LED in reverse direction is suitable for short term application. RthJA results from mounting on PC board FR 4 (pad size 5 mm2 per pad) Wavelengths are tested at a current pulse duration of 25 ms and a tolerance of 1 nm. Forward voltages are tested at a current pulse duration of 1 ms and a tolerance of 0.1 V. Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered.