https://www.phoenixcontact.com/us/products/2903708
03/16/2021Page2/7
Single relay-REL-PR3-120AC/3X1-2903708
Technical data
Coil side
Mains frequency 50/60 Hz
Typical input current at UN23 mA
Typical response time 5 ms ... 25 ms (depending on phase relation)
Typical release time range 5 ms ... 20 ms (depending on phase relation)
Power dissipation for nominal condition 2.76 W
Contact side
Contact type 3 N/O contacts
Type of switch contact Single contact
Contact material AgNi
Maximum switching voltage 440 VAC
250 VDC
Minimum switching voltage 10 V (At 24 mA)
Min. switching current 10 mA (at 24V)
Maximum inrush current 50 A (20 ms, N/O contacts)
Limiting continuous current 16 A
Interrupting rating (ohmic load) max. 384 W (at 24 V DC)
720 W (at 48 V DC)
600 W (at 60 V DC)
660 W (at 110 V DC)
183 W (at 220 V DC)
4000 VA (for 250 V AC)
4000 VA (at 440 V AC)
Switching capacity 1 A (at 24 V, DC13)
1 A (at 120 V, DC13)
1 A (at 220 V, DC13)
1.5 A (at 24 V, AC15)
1.5 A (at 120 V, AC15)
1.5 A (at 240V, AC15)
3-phase motor load 1500 W (at 400 V, AC3)
Motor load according to UL 508 1/3HP, 120VAC (N/O contact)
1/2HP, 240VAC (N/O contact)
General
Test voltage 2.5 kVrms (50Hz, 1min., winding/contact)
2.5 kVrms (50Hz, 1min., contact/contact)
2.5 kVrms (50Hz, 1min., N/O contact / N/O contact)
Operating mode 100% operating factor