1
NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
SPECIFICATIONS ARE SUBJECT TO CHANGE
Memory Back-Up Capacitors NEXT Series
NIC P/N Capacitance Value (F)
Charge Discharge
Rated Voltage
(VDC)
Max. Current @
30 minutes (mA)
Max. ESR @
1KHz (Ω)
Typical DCR
(Ω)
NEXT104Z5.5V11.5X8.5F 0.10 0.14 5.5 < 0.15 <16 23
NEXT224Z5.5V14.5X12F 0.22 0.28 5.5 <0.33 <10 16
NEXT474Z5.5V16.5X13F 0.47 0.60 5.5 <0.71 <6.5 5.4
NEXT105Z5.5V21.5X13F 1.0 1.3 5.5 <1.5 <3.5 2.9
NEXT225Z5.5V28.5X14F 2.2 2.8 5.5 <3.3 <1.8 2.1
NEXT335Z5.5V36.5X15F 3.3 4.2 5.5 <5.0 <1.0 1.3
NEXT565Z5.5V44.5X17F 5.6 7.2 5.5 <8.4 <0.6 0.8
Rated Voltage Range 5.5VDC
Rated Capacitance Range 0.1F ~ 5.6F (100,000μF ~ 5,600,000μF)
Operating Temp. Range -40°C ~ +85°C
Capacitance Tolerance +80%/-20% (Z)
Load Life Test @ 85°C
1,000 hours
Δ Capacitance Change Less than ±30% of initial measured value
Maximum ESR Less than 200% of the specifi ed maximum value
Current at 30 minutes Less than 200% of the specifi ed maximum value
Temperature Cycling
(5 cycles, -40 ~ +85°C
Δ Capacitance Change Within +80%/-20% of specifi ed value
Maximum ESR Less than specifi ed maximum value
Current at 30 minutes Less than specifi ed maximum value
Humidity Resistance
(240 hours @ 40°C/90% RH)
Δ Capacitance Change Less than ±20% of initial measured value
Maximum ESR Less than 120% of the specifi ed maximum value
Current at 30 minutes Less than 120% of the specifi ed maximum value
NIC P/N DIMENSIONS (mm)
DH SLLd
1d2
NEXT104Z5.5V11.5X8.5F 11.5 8.5 5.08 2.7 0.4 1.2
NEXT224Z5.5V14.5X12F 14.5 12.0 5.08 2.2 0.4 1.2
NEXT474Z5.5V16.5X13F 16.5 13.0 5.08 2.7 0.4 1.2
NEXT105Z5.5V21.5X13F 21.5 13.0 7.62 3.0 0.6 1.2
NEXT225Z5.5V28.5X14F 28.5 14.0 10.16 6.1 0.6 1.4
NEXT335Z5.5V36.5X15F 36.5 15.0 15.0 6.1 0.6 1.7
NEXT565Z5.5V44.5X17F 44.5 17.0 20.0 6.1 1.0 1.4
FEATURES
• SMALLER THAN NEXA SERIES
• DOUBLE LAYER CONSTRUCTION
• SHORT TERM POWER SOURCE (UP TO 50mA)
• SUITABLE FOR FLOW SOLDERING
• LEAD-FREE FINISH
CHARACTERISTICS
STANDARD VALUES AND SPECIFICATIONS
CASE DIMENSIONS (mm)
TERMINATION FINISH:
Pb-FREE (99%Sn/1%Cu)
+
-
H max.
S ±0.5
D ±0.5
LL max.
0.3mm max.
d1 ±0.1
d2 ±0.1
+
-
Super Capacitor
Super Capacitor
Application Guide
Application Guide
PRECAUTIONS
WASHING is NOT RECOMMENDED. Additional guidelines and precautions
can be found at www.niccomp.com/precautions
If in doubt or uncertainty, please review your specifi c application - process details with
NIC’s technical support personnel: tpmg@niccomp.com
