Multilayer Ceramic Chip Capacitors NMC Series X5R SURFACE MOUNT FEATURES * CLASS II DIELECTRIC, TEMPERATURE STABLE * EXCELLENT FREQUENCY CHARACTERISTICS, NON-LINEAR CAPACITANCE CHANGE * HIGHER CAPACITANCE THAN X7R (UP TO 100F) * NICKEL BARRIER TERMINATIONS AND EXCELLENT MECHANICAL STRENGTH * EIA MARKING AVAILABLE SPECIFICATIONS X5R Capacitance Range 0.0012F to 100F Capacitance Tolerances 10%(K), 20%(M) Operating Temperature Range -55oC to +85oC Temperature Characteristics 15% max. over temperature range (with 0 Vdc applied) Rated Voltages Insulation Resistance 6.3Vdc, 10Vdc, 16Vdc, 25Vdc , 35Vdc, 50Vdc C < 2.2F 5% max., C > 2.2F 10% max. @ 1.0Vrms and KHz, +25 C 10,000 Megohms min. or 100Meg ohm/F min. whichever is less @ 25C Dielectric Withstanding Voltage 250% of Rated Voltage for 5 1 seconds, 50 milliamps maximum Test Conditions (EIA-198-2E) 1KHz, 1.0V 0.2 Vrms Dissipation Factor Typical X5R Temperature Coefficient 20 10 %C 0 -10 -20 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 Temperature C Insulation Resistance (Ohm - Farads) Insulation Resistance vs. Temperature Temperature C (R) NIC COMPONENTS www.niccomp.com www.lowESR.com www.RFpassives.com 143 SURFACE MOUNT Multilayer Ceramic Chip Capacitors NMC Series X5R W T (max.) P Termination: Sn-Pb solder plate finish over nickel barrier over Cu base. Also available with 100% Sn lead-free plating finish. P L X5R CAPACITOR SIZE CHART(mm) EIA Case Size 0201 0402 0603 0805 Length (L) 0.6+0.05 1.0+0.05 1.6+0.15 2.0+0.2 Width (W) 0.3+0.05 0.5+0.05 0.8+0.15 1.25+0.2 0.33 0.6 0.9 1.4 0.10~0.20 0.10~0.40 0.10~0.60 0.25~0.75 Thickness (T max.) Termination Width (P) Working Voltage (Vdc) Capacitance 10V 6.3 10 16 6.3 10 16 25 6.3 10 16 25 35 50 1200pF 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 0.01F 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.1 0.12 0.15 0.18 0.22 (R) 144 NIC COMPONENTS www.niccomp.com www.lowESR.com www.RFpassives.com Multilayer Ceramic Chip Capacitors NMC Series X5R EIA Case Size 0603 0805 1206 1210 1812 2220 Length (L) 1.6+0.15 2.0+0.2 3.2+0.2 3.2+0.2 4.5+0.3 5.70.4 Width (W) 0.8+0.15 1.25+0.2 1.6+0.2 2.5+0.2 3.2+0.25 5.00.4 0.9 1.4 1.8 2.8 3.3 2.8 0.10~0.60 0.25~0.75 0.25~0.75 0.25~0.85 0.25~1.50 0.25~1.03 Thickness (T max.) Termination Width (P) SURFACE MOUNT X5R CAPACITOR SIZE CHART(mm) Working Voltage (Vdc) Capacitance 6.3 10 16 25 6.3 10 16 25 35 50 6.3 10 16 25 6.3 10 16 25 35 6.3 10 16 25 6.3 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 3.3 4.7 6.8 10 22 47 100 (CONSULT FACTORY FOR CAPACITANCE VALUES NOT LISTED) PART NUMBERING SYSTEM NMC 0805 X5R 102 K 50 TRP or TRPLP F Lead Free Terminations (100% Sn optional) Tape and Reel (Embossed Plastic Carrier), TRPLP10 = 10K pcs per reel TRP = Tape & Reel Paper Carrier, TRP10 = 10K pcs per reel Voltage (Vdc) Capacitance Tolerance Code (see chart above) Capacitance Code, expressed in pF, first 2 digits are significant, 3rd digit is no. of zeros, "R" indicates decimal for under 10pF Temperature Characteristic Size Code (see chart) Series (R) NIC COMPONENTS www.niccomp.com www.lowESR.com www.RFpassives.com 145