L78M05TL-TL-E - ON SEMICONDUCTOR - Datasheet.Directory

L78M00T Series

No.2609-1/8

Features

•Output voltage

L78M05T : 5V L78M06T : 6V L78M07T : 7V

L78M08T : 8V L78M09T : 9V L78M10T : 10V

L78M12T : 12V L78M15T : 15V L78M18T : 18V

L78M20T : 20V L78M24T : 24V

•500mA output.

•On-chip thermal protector.

•On-chip overcurrent limiter.

•On-chip ASO protector .

•Small-sized power package TP-3H permitting the equipment to be made compact.

•The allowable power dissipation can be increased by being surface-mounted on the board.

•Capable of being mounted in a variety of methods because of various lead forming versions available.

Specifications

[Common to L78M00T series]

Maximum Ratings at Ta=25°C

Parameter Symbol Conditions Ratings Unit

Maximum supply voltage VCC max Pin 1 35 V

Allowable power dissipation Pd max No fin 1.0 W

Operating temperature Topr --20 to +80 °C

Storage temperature Tstg --40 to +150 °C

SANYO Electric Co.,Ltd. Semiconductor Company

TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN

21006 SY IM / D1599TH (KT) / D0694HK / 9237KI / 9107TA, TS

Any and all SANYO products described or contained herein do not have specifications that can handle

applications that require extremely high levels of reliability, such as life-support systems, aircraft's

control systems, or other applications whose failure can be reasonably expected to result in serious

physical and/or material damage. Consult with your SANYO representative nearest you before using

any SANYO products described or contained herein in such applications.

SANYO assumes no responsibility for equipment failures that result from using products at values that

exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other

parameters) listed in products specifications of any and all SANYO products described or contained

herein.

L78M00T Series

Monolithic Linear IC

5 to 24V 0.5A 3-Pin Voltage

Regulators

Ordering number : EN2609C

L78M00T Series

No.2609-2/8

[L78M05T]

Recommended Operating Conditions at Ta=25°C

Parameter Symbol Conditions Ratings Unit

Input voltage VIN 7.5 to 20.0 V

Output current IOUT 5 to 500 mA

Operating Characteristics at Ta=25°C, VIN=10V, IOUT=350mA, See specified Test Circuit.

Ratings

Parameter Symbol Conditions min typ max Unit

Output voltage VOUT Tj=25°C 4.8 5.0 5.2 V

Line regulation ΔVO Iine Tj=25°C, 7V≤VIN≤25V, IOUT=200mA 3.0 50 mV

Tj=25°C, 8V≤VIN≤20V, IOUT=200mA 1.0 25 mV

Load regulation ΔVO Ioad Tj=25°C, 5mA≤IOUT≤500mA 100 mV

Tj=25°C, 5mA≤IOUT≤200mA 50 mV

Output voltage VOUT 7V≤VIN≤20V, 5mA≤IOUT≤350mA 4.75 5.25 V

Current dissipation ICC Tj=25°C 4.5 6.0 mA

Current dissipation variation (Line) ΔICC Iine 8V≤VIN≤20V, IOUT=200mA 0.8 mA

Current dissipation variation (Load) ΔICC Ioad 5mA≤IOUT≤350mA 0.5 mA

Output noise voltage VNO 10Hz≤f≤100kHz 40 μV

Ripple rejection Rrej

f=120Hz, 8V≤VIN≤19V, Tj=25°C, IOUT=100mA

62 dB

f=120Hz, 8V≤VIN≤19V, Tj=25°C, IOUT=300mA

62 80 dB

Minimum input-output voltage dropout Vdrop IOUT=350mA 2.0 V

Short current IOS Tj=25°C, VIN=35V, to GND 300 mA

Peak output current IOP Tj=25°C 0.7 A

[L78M06T]

Recommended Operating Conditions at Ta=25°C

Parameter Symbol Conditions Ratings Unit

Input voltage VIN 8.5 to 21 V

Output current IOUT 5 to 500 mA

Operating Characteristics at Ta=25°C, VIN=11V, IOUT=350mA, See specified Test Circuit.

Ratings

Parameter Symbol Conditions min typ max Unit

Output voltage VOUT Tj=25°C 5.75 6.0 6.25 V

Line regulation ΔVO Iine Tj=25°C, 8V≤VIN≤25V, IOUT=200mA 5.0 60 mV

Tj=25°C, 9V≤VIN≤20V, IOUT=200mA 1.5 30 mV

Load regulation ΔVO Ioad Tj=25°C, 5mA≤IOUT≤500mA 120 mV

Tj=25°C, 5mA≤IOUT≤200mA 60 mV

Output voltage VOUT 8V≤VIN≤21V, 5mA≤IOUT≤350mA 5.7 6.3 V

Current dissipation ICC Tj=25°C 4.5 6.0 mA

Current dissipation variation (Line) ΔICC Iine 9V≤VIN≤25V, IOUT=200mA 0.8 mA

Current dissipation variation (Load) ΔICC Ioad 5mA≤IOUT≤350mA 0.5 mA

Output noise voltage VNO 10Hz≤f≤100kHz 45 μV

Ripple rejection Rrej

f=120Hz, 9V≤VIN≤20V, Tj=25°C, IOUT=100mA

59 dB

f=120Hz, 9V≤VIN≤20V, Tj=25°C, IOUT=300mA

59 80 dB

Minimum input-output voltage dropout Vdrop IOUT=350mA 2.0 V

Short current IOS Tj=25°C, VIN=35V, to GND 300 mA

Peak output current IOP Tj=25°C 0.7 A

L78M00T Series

No.2609-3/8

[L78M07T]

Recommended Operating Conditions at Ta=25°C

Parameter Symbol Conditions Ratings Unit

Input voltage VIN 9.5 to 22 V

Output current IOUT 5 to 500 mA

Operating Characteristics at Ta=25°C, VIN=12V, IOUT=350mA, See specified Test Circuit.

Ratings

Parameter Symbol Conditions min typ max Unit

Output voltage VOUT Tj=25°C 6.72 7.0 7.28 V

Line regulation ΔVO Iine Tj=25°C, 9V≤VIN≤25V, IOUT=200mA 6.0 60 mV

Tj=25°C, 10V≤VIN≤20V, IOUT=200mA 2.0 30 mV

Load regulation ΔVO Ioad Tj=25°C, 5mA≤IOUT≤500mA 140 mV

Tj=25°C, 5mA≤IOUT≤200mA 70 mV

Output voltage VOUT 9V≤VIN≤22V, 5mA≤IOUT≤350mA 6.6 7.4 V

Current dissipation ICC Tj=25°C 4.6 6.0 mA

Current dissipation variation (Line) ΔICC Iine 10V≤VIN≤25V, IOUT=200mA 0.8 mA

Current dissipation variation (Load) ΔICC Ioad 5mA≤IOUT≤350mA 0.5 mA

Output noise voltage VNO 10Hz≤f≤100kHz 48 μV

Ripple rejection Rrej

f=120Hz, 10V≤VIN≤21V, Tj=25°C, IOUT=100mA

58 dB

f=120Hz, 10V≤VIN≤21V, Tj=25°C, IOUT=300mA

58 80 dB

Minimum input-output voltage dropout Vdrop IOUT=350mA 2.0 V

Short current IOS Tj=25°C, VIN=35V, to GND 300 mA

Peak output current IOP Tj=25°C 0.7 A

[L78M08T]

Recommended Operating Conditions at Ta=25°C

Parameter Symbol Conditions Ratings Unit

Input voltage VIN 10.5 to 23 V

Output current IOUT 5 to 500 mA

Operating Characteristics at Ta=25°C, VIN=15V, IOUT=350mA, See specified Test Circuit.

Ratings

Parameter Symbol Conditions min typ max Unit

Output voltage VOUT Tj=25°C 7.7 8.0 8.3 V

Line regulation ΔVO Iine Tj=25°C, 10.5V≤VIN≤25V, IOUT=200mA 6.0 60 mV

Tj=25°C, 11V≤VIN≤20V, IOUT=200mA 2.0 30 mV

Load regulation ΔVO Ioad Tj=25°C, 5mA≤IOUT≤500mA 160 mV

Tj=25°C, 5mA≤IOUT≤200mA 80 mV

Output voltage VOUT 10.5V≤VIN≤23V, 5mA≤IOUT≤350mA 7.6 8.4 V

Current dissipation ICC Tj=25°C 4.6 6.0 mA

Current dissipation variation (Line) ΔICC Iine 11V≤VIN≤25V, IOUT=200mA 0.8 mA

Current dissipation variation (Load) ΔICC Ioad 5mA≤IOUT≤350mA 0.5 mA

Output noise voltage VNO 10Hz≤f≤100kHz 50 μV

Ripple rejection Rrej

f=120Hz, 11.5V≤VIN≤22V, Tj=25°C, IOUT=100mA

56 dB

f=120Hz, 11.5V≤VIN≤22V, Tj=25°C, IOUT=300mA

56 80 dB

Minimum input-output voltage dropout Vdrop IOUT=350mA 2.0 V

Short current IOS Tj=25°C, VIN=35V, to GND 300 mA

Peak output current IOP Tj=25°C 0.7 A

L78M00T Series

No.2609-4/8

[L78M09T]

Recommended Operating Conditions at Ta=25°C

Parameter Symbol Conditions Ratings Unit

Input voltage VIN 12 to 25 V

Output current IOUT 5 to 500 mA

Operating Characteristics at Ta=25°C, VIN=16V, IOUT=350mA, See specified Test Circuit.

Ratings

Parameter Symbol Conditions min typ max Unit

Output voltage VOUT Tj=25°C 8.6 9.0 9.4 V

Line regulation ΔVO Iine Tj=25°C, 11.5V≤VIN≤25V, IOUT=200mA 6.0 100 mV

Tj=25°C, 12V≤VIN≤20V, IOUT=200mA 2.0 50 mV

Load regulation ΔVO Ioad Tj=25°C, 5mA≤IOUT≤500mA 180 mV

Tj=25°C, 5mA≤IOUT≤200mA 90 mV

Output voltage VOUT 11.5V≤VIN≤24V, 5mA≤IOUT≤350mA 8.5 9.5 V

Current dissipation ICC Tj=25°C 4.6 6.0 mA

Current dissipation variation (Line) ΔICC Iine 12.5V≤VIN≤25V, IOUT=200mA 0.8 mA

Current dissipation variation (Load) ΔICC Ioad 5mA≤IOUT≤350mA 0.5 mA

Output noise voltage VNO 10Hz≤f≤100kHz 60 μV

Ripple rejection Rrej

f=120Hz, 12V≤VIN≤23V, Tj=25°C, IOUT=100mA

56 dB

f=120Hz, 12V≤VIN≤23V, Tj=25°C, IOUT=300mA

56 80 dB

Minimum input-output voltage dropout Vdrop IOUT=350mA 2.0 V

Short current IOS Tj=25°C, VIN=35V, to GND 300 mA

Peak output current IOP Tj=25°C 0.7 A

[L78M10T]

Recommended Operating Conditions at Ta=25°C

Parameter Symbol Conditions Ratings Unit

Input voltage VIN 13 to 25 V

Output current IOUT 5 to 500 mA

Operating Characteristics at Ta=25°C, VIN=17V, IOUT=350mA, See specified Test Circuit.

Ratings

Parameter Symbol Conditions min typ max Unit

Output voltage VOUT Tj=25°C 9.6 10.0 10.4 V

Line regulation ΔVO Iine Tj=25°C, 12.5V≤VIN≤25V, IOUT=200mA 7.0 100 mV

Tj=25°C, 13V≤VIN≤22V, IOUT=200mA 2.0 50 mV

Load regulation ΔVO Ioad Tj=25°C, 5mA≤IOUT≤500mA 200 mV

Tj=25°C, 5mA≤IOUT≤200mA 100 mV

Output voltage VOUT 12.5V≤VIN≤25V, 5mA≤IOUT≤350mA 9.5 10.5 V

Current dissipation ICC Tj=25°C 4.6 6.0 mA

Current dissipation variation (Line) ΔICC Iine 13.5V≤VIN≤25V, IOUT=200mA 0.8 mA

Current dissipation variation (Load) ΔICC Ioad 5mA≤IOUT≤350mA 0.5 mA

Output noise voltage VNO 10Hz≤f≤100kHz 65 μV

Ripple rejection Rrej

f=120Hz, 13V≤VIN≤25V, Tj=25°C, IOUT=100mA

55 dB

f=120Hz, 13V≤VIN≤25V, Tj=25°C, IOUT=300mA

55 80 dB

Minimum input-output voltage dropout Vdrop IOUT=350mA 2.0 V

Short current IOS Tj=25°C, VIN=35V, to GND 300 mA

Peak output current IOP Tj=25°C 0.7 A

L78M00T Series

No.2609-5/8

[L78M12T]

Recommended Operating Conditions at Ta=25°C

Parameter Symbol Conditions Ratings Unit

Input voltage VIN 15 to 25 V

Output current IOUT 5 to 500 mA

Operating Characteristics at Ta=25°C, VIN=19V, IOUT=350mA, See specified Test Circuit.

Ratings

Parameter Symbol Conditions min typ max Unit

Output voltage VOUT Tj=25°C 11.5 12.0 12.5 V

Line regulation ΔVO Iine Tj=25°C, 14.5V≤VIN≤30V, IOUT=200mA 8.0 100 mV

Tj=25°C, 16V≤VIN≤25V, IOUT=200mA 2.0 50 mV

Load regulation ΔVO Ioad Tj=25°C, 5mA≤IOUT≤500mA 240 mV

Tj=25°C, 5mA≤IOUT≤200mA 120 mV

Output voltage VOUT 14.5V≤VIN≤27V, 5mA≤IOUT≤350mA 11.4 12.6 V

Current dissipation ICC Tj=25°C 4.8 6.0 mA

Current dissipation variation (Line) ΔICC Iine 15V≤VIN≤30V, IOUT=200mA 0.8 mA

Current dissipation variation (Load) ΔICC Ioad 5mA≤IOUT≤350mA 0.5 mA

Output noise voltage VNO 10Hz≤f≤100kHz 75 μV

Ripple rejection Rrej

f=120Hz, 15V≤VIN≤25V, Tj=25°C, IOUT=100mA

55 dB

f=120Hz, 15V≤VIN≤25V, Tj=25°C, IOUT=300mA

55 80 dB

Minimum input-output voltage dropout Vdrop IOUT=350mA 2.0 V

Short current IOS Tj=25°C, VIN=35V, to GND 300 mA

Peak output current IOP Tj=25°C 0.7 A

[L78M15T]

Recommended Operating Conditions at Ta=25°C

Parameter Symbol Conditions Ratings Unit

Input voltage VIN 18 to 30 V

Output current IOUT 5 to 500 mA

Operating Characteristics at Ta=25°C, VIN=23V, IOUT=350mA, See specified Test Circuit.

Ratings

Parameter Symbol Conditions min typ max Unit

Output voltage VOUT Tj=25°C 14.4 15.0 15.6 V

Line regulation ΔVO Iine Tj=25°C, 17.5V≤VIN≤30V, IOUT=200mA 10.0 100 mV

Tj=25°C, 19V≤VIN≤30V, IOUT=200mA 3.0 50 mV

Load regulation ΔVO Ioad Tj=25°C, 5mA≤IOUT≤500mA 300 mV

Tj=25°C, 5mA≤IOUT≤200mA 150 mV

Output voltage VOUT 17.5V≤VIN≤30V, 5mA≤IOUT≤350mA 14.25 15.75 V

Current dissipation ICC Tj=25°C 4.8 6.0 mA

Current dissipation variation (Line) ΔICC Iine 17.5V≤VIN≤30V, IOUT=200mA 0.8 mA

Current dissipation variation (Load) ΔICC Ioad 5mA≤IOUT≤350mA 0.5 mA

Output noise voltage VNO 10Hz≤f≤100kHz 90 μV

Ripple rejection Rrej

f=120Hz, 18.5V≤VIN≤28.5V, Tj=25°C, IOUT=100mA

54 dB

f=120Hz, 18.5V≤VIN≤28.5V, Tj=25°C, IOUT=300mA

54 70 dB

Minimum input-output voltage dropout Vdrop IOUT=350mA 2.0 V

Short current IOS Tj=25°C, VIN=35V, to GND 300 mA

Peak output current IOP Tj=25°C 0.7 A

L78M00T Series

No.2609-6/8

[L78M18T]

Recommended Operating Conditions at Ta=25°C

Parameter Symbol Conditions Ratings Unit

Input voltage VIN 21 to 33 V

Output current IOUT 5 to 500 mA

Operating Characteristics at Ta=25°C, VIN=27V, IOUT=350mA, See specified Test Circuit.

Ratings

Parameter Symbol Conditions min typ max Unit

Output voltage VOUT Tj=25°C 17.3 18.0 18.7 V

Line regulation ΔVO Iine Tj=25°C, 21V≤VIN≤35V, IOUT=200mA 10.0 100 mV

Tj=25°C, 22V≤VIN≤35V, IOUT=200mA 5.0 50 mV

Load regulation ΔVO Ioad Tj=25°C, 5mA≤IOUT≤500mA 360 mV

Tj=25°C, 5mA≤IOUT≤200mA 180 mV

Output voltage VOUT 21V≤VIN≤33V, 5mA≤IOUT≤350mA 17.1 18.9 V

Current dissipation ICC Tj=25°C 4.9 6.0 mA

Current dissipation variation (Line) ΔICC Iine 21V≤VIN≤33V, IOUT=200mA 0.8 mA

Current dissipation variation (Load) ΔICC Ioad 5mA≤IOUT≤350mA 0.5 mA

Output noise voltage VNO 10Hz≤f≤100kHz 100 μV

Ripple rejection Rrej

f=120Hz, 22V≤VIN≤33V, Tj=25°C, IOUT=100mA

53 dB

f=120Hz, 22V≤VIN≤33V, Tj=25°C, IOUT=300mA

53 70 dB

Minimum input-output voltage dropout Vdrop IOUT=350mA 2.0 V

Short current IOS Tj=25°C, VIN=35V, to GND 300 mA

Peak output current IOP Tj=25°C 0.7 A

[L78M20T]

Recommended Operating Conditions at Ta=25°C

Parameter Symbol Conditions Ratings Unit

Input voltage VIN 23 to 35 V

Output current IOUT 5 to 500 mA

Operating Characteristics at Ta=25°C, VIN=29V, IOUT=350mA, See specified Test Circuit.

Ratings

Parameter Symbol Conditions min typ max Unit

Output voltage VOUT Tj=25°C 19.2 20.0 20.8 V

Line regulation ΔVO Iine Tj=25°C, 23V≤VIN≤35V, IOUT=200mA 10.0 100 mV

Tj=25°C, 24V≤VIN≤35V, IOUT=200mA 5.0 50 mV

Load regulation ΔVO Ioad Tj=25°C, 5mA≤IOUT≤500mA 400 mV

Tj=25°C, 5mA≤IOUT≤200mA 200 mV

Output voltage VOUT 23V≤VIN≤35V, 5mA≤IOUT≤350mA 19.0 21.0 V

Current dissipation ICC Tj=25°C 4.9 6.0 mA

Current dissipation variation (Line) ΔICC Iine 23V≤VIN≤35V, IOUT=200mA 0.8 mA

Current dissipation variation (Load) ΔICC Ioad 5mA≤IOUT≤350mA 0.5 mA

Output noise voltage VNO 10Hz≤f≤100kHz 110 μV

Ripple rejection Rrej

f=120Hz, 24V≤VIN≤34V, Tj=25°C, IOUT=100mA

53 dB

f=120Hz, 24V≤VIN≤34V, Tj=25°C, IOUT=300mA

53 70 dB

Minimum input-output voltage dropout Vdrop IOUT=350mA 2.0 V

Short current IOS Tj=25°C, VIN=35V, to GND 300 mA

Peak output current IOP Tj=25°C 0.7 A

L78M00T Series

No.2609-7/8

[L78M24T]

Recommended Operating Conditions at Ta=25°C

Parameter Symbol Conditions Ratings Unit

Input voltage VIN 27 to 35 V

Output current IOUT 5 to 500 mA

Operating Characteristics at Ta=25°C, VIN=33V, IOUT=350mA, See specified Test Circuit.

Ratings

Parameter Symbol Conditions min typ max Unit

Output voltage VOUT Tj=25°C 23.0 24.0 25.0 V

Line regulation ΔVO Iine Tj=25°C, 27V≤VIN≤35V, IOUT=200mA 10.0 100 mV

Tj=25°C, 28V≤VIN≤35V, IOUT=200mA 5.0 50 mV

Load regulation ΔVO Ioad Tj=25°C, 5mA≤IOUT≤500mA 480 mV

Tj=25°C, 5mA≤IOUT≤200mA 240 mV

Output voltage VOUT 27V≤VIN≤35V, 5mA≤IOUT≤350mA 22.8 25.2 V

Current dissipation ICC Tj=25°C 5.0 6.0 mA

Current dissipation variation (Line) ΔICC Iine 27V≤VIN≤35V, IOUT=200mA 0.8 mA

Current dissipation variation (Load) ΔICC Ioad 5mA≤IOUT≤350mA 0.5 mA

Output noise voltage VNO 10Hz≤f≤100kHz 170 μV

Ripple rejection Rrej

f=120Hz, 28V≤VIN≤35V, Tj=25°C, IOUT=100mA

50 dB

f=120Hz, 28V≤VIN≤35V, Tj=25°C, IOUT=300mA

50 70 dB

Minimum input-output voltage dropout Vdrop IOUT=350mA 2.0 V

Short current IOS Tj=25°C, VIN=35V, to GND 300 mA

Peak output current IOP Tj=25°C 0.7 A

Package Dimensions Equivalent Circuit

unit : mm

3110A

Specified Test Circuit (Common to L78M00T series)

6.5

5.0

123

7.0

1.5

7.5 (5.5)

0.52.6

(0.65) 1.20.5

0.5

2.3

0.6

SANYO : TP3H

INPUT

GND

OUTPUT

Overcurrent

limiter

Starter

ASO

protector

Thermal

protector

Error amp

Reference

voltage

IL00021

INPUT

0.33μF

0.1μF

OUTPUT

L78MOOT

Series

IL00022

L78M00T Series

No.2609-8/8

Specifications of any and all SANYO products described or contained herein stipulate the performance,

characteristics, and functions of the described products in the independent state, and are not guarantees

of the performance, characteristics, and functions of the described products as mounted in the customer’s

products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,

the customer should always evaluate and test devices mounted in the customer’s products or equipment.

SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all

semiconductor products fail with some probability. It is possible that these probabilistic failures could

give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,

or that could cause damage to other property. When designing equipment, adopt safety measures so

that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective

circuits and error prevention circuits for safe design, redundant design, and structural design.

In the event that any or all SANYO products(including technical data,services) described or

contained herein are controlled under any of applicable local export control laws and regulations,

such products must not be exported without obtaining the export license from the authorities

concerned in accordance with the above law.

No part of this publication may be reproduced or transmitted in any form or by any means, electronic or

mechanical, including photocopying and recording, or any information storage or retrieval system,

or otherwise, without the prior written permission of SANYO Electric Co. , Ltd.

Any and all information described or contained herein are subject to change without notice due to

product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"

for the SANYO product that you intend to use.

Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not

guaranteed for volume production. SANYO believes information herein is accurate and reliable, but

no guarantees are made or implied regarding its use or any infringements of intellectual property rights

or other rights of third parties.

This catalog provides information as of February, 2006. Specifications and information herein are subject

to change without notice.

The allowable power dissipation (Pd max) is 1.0W (Ta=25°C) with no fin attached. When the L78M00T series are

surface-mounted on a hybrid IC board or printed circuit board, a high allowable power dissipation can be obtained,

though they are placed in a small-sized package.

Shown below is the relationship between the Cu-foiled area and the allowable power dissipation when the L78M00T

series are surface-mounted on a glass epoxy board (50✕50✕0.8mm3).

Lead Formings

FA formings LR formings

Pd max -- Ta

Allowable Power Dissipation, Pd max -- W

Ambient Temperature, Ta -- °C

1.2

1.0

0.8

0.6

0.2

0.4

--20 0 40

20 60 80 100

1.0

222357

1000 3

IL00023

Pd max -- S

Allowable Power Dissipation, Pd max -- W

Cu-foiled Area, S -- mm

2IL00024

No heat sink

357

100

Surface-mounted on board 50✕50✕0.8tmm

(glass epoxy)

IL00025

IL00026