Product Folder Sample & Buy Support & Community Tools & Software Technical Documents LM4040-N, LM4040-N-Q1 SNOS633K - OCTOBER 2000 - REVISED JUNE 2016 LM4040-N/-Q1 Precision Micropower Shunt Voltage Reference 1 Features 3 Description * * * * * Ideal for space-critical applications, the LM4040-N precision voltage reference is available in the subminiature SC70 and SOT-23 surface-mount package. The advanced design of the LM4040-N eliminates the need for an external stabilizing capacitor while ensuring stability with any capacitive load, thus making the LM4040-N easy to use. Further reducing design effort is the availability of several fixed reverse breakdown voltages: 2.048 V, 2.5 V, 3 V, 4.096 V, 5 V, 8.192 V, and 10 V. The minimum operating current increases from 60 A for the 2.5-V LM4040-N to 100 A for the 10-V LM4040-N. All versions have a maximum operating current of 15 mA. 1 * SOT-23 AEC Q-100 Grades 1 and 3 Available Small Packages: SOT-23, TO-92, and SC70 No Output Capacitor Required Tolerates Capacitive Loads Fixed Reverse Breakdown Voltages of 2.048 V, 2.5 V, 3 V, 4.096 V, 5 V, 8.192 V, and 10 V Key Specifications (2.5-V LM4040-N) - Output Voltage Tolerance (A Grade, 25C): 0.1% (Maximum) - Low Output Noise (10 Hz to 10 kHz): 35 Vrms (Typical) - Wide Operating Current Range: 60 A to 15 mA - Industrial Temperature Range: -40C to +85C - Extended Temperature Range: -40C to +125C - Low Temperature Coefficient: 100 ppm/C (Maximum) Also available is the LM4041-N with two reverse breakdown voltage versions: adjustable and 1.2 V. See the LM4041-N data sheet (SNOS641). 2 Applications * * * * * * * * The LM4040-N uses a fuse and Zener-zap reverse breakdown voltage trim during wafer sort to ensure that the prime parts have an accuracy of better than 0.1% (A grade) at 25C. Bandgap reference temperature drift curvature correction and low dynamic impedance ensure stable reverse breakdown voltage accuracy over a wide range of operating temperatures and currents. Portable, Battery-Powered Equipment Data Acquisition Systems Instrumentation Process Controls Energy Management Product Testing Automotives Precision Audio Components Device Information(1) PART NUMBER LM4040-N LM4040-N-Q1 PACKAGE BODY SIZE (NOM) TO-92 (3) 4.30 mm x 4.30 mm SC70 (5) 2.00 mm x 1.25 mm SOT-23 (3) 2.92 mm x 1.30 mm SOT-23 (3) 2.92 mm x 1.30 mm (1) For all available packages, see the orderable addendum at the end of the data sheet. Shunt Reference Application Schematic VDD RS VOUT Cathode LM4040 Anode 1 An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications, intellectual property matters and other important disclaimers. PRODUCTION DATA. LM4040-N, LM4040-N-Q1 SNOS633K - OCTOBER 2000 - REVISED JUNE 2016 www.ti.com Table of Contents 1 2 3 4 5 6 Features .................................................................. Applications ........................................................... Description ............................................................. Revision History..................................................... Pin Configuration and Functions ......................... Specifications......................................................... 6.17 Electrical Characteristics: 5-V LM4040-N VR Tolerance Grades 'C' And 'D'; Temperature Grade 'I'............................................................................... 6.18 Electrical Characteristics: 5-V LM4040-N VR Tolerance Grades 'C' And 'D'; Temperature Grade 'E' ............................................................................. 6.19 Electrical Characteristics: 8.2-V LM4040-N VR Tolerance Grades 'A' And 'B'; Temperature Grade 'I'............................................................................... 6.20 Electrical Characteristics: 8.2-V Lm4040-N VR Tolerance Grades 'C' And 'D'; Temperature Grade 'I'............................................................................... 6.21 Electrical Characteristics: 10-V LM4040-N VR Tolerance Grades 'A' And 'B'; Temperature Grade 'I'............................................................................... 6.22 Electrical Characteristics: 10-V LM4040-N VR Tolerance Grades 'C' And 'D'; Temperature Grade 'I'............................................................................... 6.23 Typical Characteristics .......................................... 1 1 1 3 4 5 6.1 6.2 6.3 6.4 6.5 Absolute Maximum Ratings ...................................... 5 ESD Ratings.............................................................. 5 Recommended Operating Conditions....................... 6 Thermal Information .................................................. 6 Electrical Characteristics: 2-V LM4040-N VR Tolerance Grades 'A' And 'B'; Temperature Grade 'I' 7 6.6 Electrical Characteristics: 2-V LM4040-N VR Tolerance Grades 'C', 'D', And 'E'; Temperature Grade 'I'...................................................................... 8 6.7 Electrical Characteristics: 2-V LM4040-N VR Tolerance Grades 'C', 'D', And 'E'; Temperature Grade 'E' .................................................................. 10 6.8 Electrical Characteristics: 2.5-V LM4040-N VR Tolerance Grades 'A' And 'B'; Temperature Grade 'I' (AEC Grade 3) ......................................................... 11 6.9 Electrical Characteristics: 2.5-V LM4040-N VR Tolerance Grades 'C', 'D', and 'E'; Temperature Grade 'I' (AEC Grade 3)...................................................... 13 6.10 Electrical Characteristics: 2.5-V LM4040-N VR Tolerance Grades 'C', 'D', And 'E'; Temperature Grade 'E' (AEC Grade 1) ......................................... 15 6.11 Electrical Characteristics: 3-V LM4040-N VR Tolerance Grades 'A' And 'B'; Temperature Grade 'I'............................................................................... 17 6.12 Electrical Characteristics: 3-V LM4040-N VR Tolerance Grades 'C', 'D', And 'E'; Temperature Grade 'I'.................................................................... 18 6.13 Electrical Characteristics: 3-V LM4040-N VR Tolerance Grades 'C', 'D', And 'E'; Temperature Grade 'E' .................................................................. 20 6.14 Electrical Characteristics: 4.1-V LM4040-N VR Tolerance Grades 'A' And 'B'; Temperature Grade 'I'............................................................................... 21 6.15 Electrical Characteristics: 4.1-V LM4040-N VR Tolerance Grades 'C' and 'D'; Temperature Grade 'I'............................................................................... 22 6.16 Electrical Characteristics: 5-V LM4040-N VR Tolerance Grades 'A' And 'B'; Temperature Grade 'I'............................................................................... 23 2 Submit Documentation Feedback 7 8 26 27 28 29 30 31 Parameter Measurement Information ................ 32 Detailed Description ............................................ 33 8.1 8.2 8.3 8.4 9 24 Overview ................................................................. Functional Block Diagram ....................................... Feature Description................................................. Device Functional Modes........................................ 33 33 33 33 Application and Implementation ........................ 34 9.1 Application Information............................................ 34 9.2 Typical Applications ................................................ 34 10 Power Supply Recommendations ..................... 41 11 Layout................................................................... 41 11.1 Layout Guidelines ................................................. 41 11.2 Layout Example .................................................... 41 12 Device and Documentation Support ................. 42 12.1 12.2 12.3 12.4 12.5 12.6 Documentation Support ........................................ Related Links ........................................................ Community Resources.......................................... Trademarks ........................................................... Electrostatic Discharge Caution ............................ Glossary ................................................................ 42 42 42 42 42 42 13 Mechanical, Packaging, And Orderable Information ........................................................... 42 13.1 SOT-23 and SC70 Package Marking Information 42 Copyright (c) 2000-2016, Texas Instruments Incorporated Product Folder Links: LM4040-N LM4040-N-Q1 LM4040-N, LM4040-N-Q1 www.ti.com SNOS633K - OCTOBER 2000 - REVISED JUNE 2016 4 Revision History NOTE: Page numbers for previous revisions may differ from page numbers in the current version. Changes from Revision J (August 2015) to Revision K * Page Updated pinout diagrams ...................................................................................................................................................... 4 Changes from Revision I (April 2015) to Revision J * Page Added ESD Ratings table, Feature Description section, Device Functional Modes section, Application and Implementation section, Power Supply Recommendations section, Layout section, Device and Documentation Support section, and Mechanical, Packaging, and Orderable Information section ............................................................... 1 Changes from Revision H (April 2013) to Revision I * Page Added some of the latest inclusions from new TI formatting and made available of the automotive grade for the SOT-23 package..................................................................................................................................................................... 1 Changes from Revision G (July 2012) to Revision H * Page Changed layout of National Data Sheet to TI format ............................................................................................................. 1 Copyright (c) 2000-2016, Texas Instruments Incorporated Product Folder Links: LM4040-N LM4040-N-Q1 Submit Documentation Feedback 3 LM4040-N, LM4040-N-Q1 SNOS633K - OCTOBER 2000 - REVISED JUNE 2016 www.ti.com 5 Pin Configuration and Functions DBZ Package 3-Pin SOT-23 Top View LP Package 3-Pin TO-92 Bottom View 1 NC + + 3(1) 2 DCK Package 5-Pin SC70 Top View 1 5 NC NC(2) 2 3 4 + NC Pin Functions PIN I/O DESCRIPTION NAME SOT-23 TO-92 SC70 Anode 2 1 1 O Anode pin, normally grounded Cathode 1 2 3 I/O Shunt Current/Output Voltage NC 3 (1) -- 2 (2) -- Must float or connect to anode NC -- 3 4, 5 -- No connect (1) (2) 4 This pin must be left floating or connected to pin 2. This pin must be left floating or connected to pin 1. Submit Documentation Feedback Copyright (c) 2000-2016, Texas Instruments Incorporated Product Folder Links: LM4040-N LM4040-N-Q1 LM4040-N, LM4040-N-Q1 www.ti.com SNOS633K - OCTOBER 2000 - REVISED JUNE 2016 6 Specifications 6.1 Absolute Maximum Ratings over operating free-air temperature range (unless otherwise noted) (1) (2) MIN Reverse current Forward current Power dissipation (TA = 25C) (3) Soldering temperature (4) (3) (4) mA 10 mA 306 mW TO-92 (Z) package 550 mW SC70 (M7) package 241 mW SOT-23 (M3) Package Peak Reflow (30 sec) 260 C TO-92 (Z) Package Soldering (10 sec) 260 C 260 C 150 C SC70 (M7) Package Peak Reflow (30 sec) (2) UNIT 20 SOT-23 (M3) package Storage temperature (1) MAX -65 Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/ Distributors for availability and specifications. The maximum power dissipation must be derated at elevated temperatures and is dictated by TJmax (maximum junction temperature), RJA (junction to ambient thermal resistance), and TA (ambient temperature). The maximum allowable power dissipation at any temperature is PDmax = (TJmax - TA)/RJA or the number given in the Absolute Maximum Ratings, whichever is lower. For the LM4040-N, TJmax = 125C, and the typical thermal resistance (RJA), when board mounted, is 326C/W for the SOT-23 package, and 180C/W with 0.4 lead length and 170C/W with 0.125 lead length for the TO-92 package and 415C/W for the SC70 Package. For definitions of Peak Reflow Temperatures for Surface Mount devices, see the TI Absolute Maximum Ratings for Soldering Application Report (SNOA549). 6.2 ESD Ratings VALUE V(ESD) (1) (2) Electrostatic discharge Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001 (1) 2000 Charged-device model (CDM), per JEDEC specification JESD22C101 (2) 200 UNIT V JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process. JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process. Copyright (c) 2000-2016, Texas Instruments Incorporated Product Folder Links: LM4040-N LM4040-N-Q1 Submit Documentation Feedback 5 LM4040-N, LM4040-N-Q1 SNOS633K - OCTOBER 2000 - REVISED JUNE 2016 www.ti.com 6.3 Recommended Operating Conditions over operating free-air temperature range (unless otherwise noted) (1) (2) MIN Temperature (Tmin TA Tmax) Reverse Current (1) (2) Industrial Temperature -40C TA 85 Extended Temperature -40 TA 125C MAX UNIT C C LM4040-N-2.0 60 15 A to mA LM4040-N-2.5 60 15 A to mA LM4040-N-3.0 62 15 A to mA LM4040-N-4.1 68 15 A to mA LM4040-N-5.0 74 15 A to mA LM4040-N-8.2 91 15 A to mA LM4040-N-10.0 100 15 A to mA Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Recommended Operating Conditions indicate conditions for which the device is functional, but do not ensure specific performance limits. For ensured specifications and test conditions, see the Electrical Characteristics. The ensured specifications apply only for the test conditions listed. Some performance characteristics may degrade when the device is not operated under the listed test conditions. The maximum power dissipation must be derated at elevated temperatures and is dictated by TJmax (maximum junction temperature), RJA (junction to ambient thermal resistance), and TA (ambient temperature). The maximum allowable power dissipation at any temperature is PDmax = (TJmax - TA)/RJA or the number given in the Absolute Maximum Ratings, whichever is lower. For the LM4040-N, TJmax = 125C, and the typical thermal resistance (RJA), when board mounted, is 326C/W for the SOT-23 package, and 180C/W with 0.4 lead length and 170C/W with 0.125 lead length for the TO-92 package and 415C/W for the SC70 package. 6.4 Thermal Information LM4040-N/LM4040-N-Q1 THERMAL METRIC (1) DBZ (SOT-23) LP (TO-92) DCK (SC70) 5 PINS UNIT 3 PINS 3 PINS RJA Junction-to-ambient thermal resistance 291.9 166 267 C/W RJC(top) Junction-to-case (top) thermal resistance 114.3 88.2 95.6 C/W RJB Junction-to-board thermal resistance 62.3 145.2 48.1 C/W JT Junction-to-top characterization parameter 7.4 32.5 2.4 C/W JB Junction-to-board characterization parameter 61 N/A 47.3 C/W RJC(bot) Junction-to-case (bottom) thermal resistance N/A N/A N/A C/W (1) 6 For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application report, SPRA953. Submit Documentation Feedback Copyright (c) 2000-2016, Texas Instruments Incorporated Product Folder Links: LM4040-N LM4040-N-Q1 LM4040-N, LM4040-N-Q1 www.ti.com SNOS633K - OCTOBER 2000 - REVISED JUNE 2016 6.5 Electrical Characteristics: 2-V LM4040-N VR Tolerance Grades 'A' And 'B'; Temperature Grade 'I' all other limits TA = TJ = 25C. The grades A and B designate initial Reverse Breakdown Voltage tolerances of 0.1% and 0.2%, respectively. PARAMETER Reverse Breakdown Voltage VR IRMIN Reverse Breakdown Voltage Tolerance (2) VR/I R IR = 100 A Reverse Breakdown Voltage Change with Operating Current Change (3) TYP MAX (1) UNIT 2.048 IR = 100 A V LM4040AIM3 LM4040AIZ 2 LM4040BIM3 LM4040BIZ LM4040BIM7 4.1 mV LM4040AIM3 LM4040AIZ TA = TJ = TMIN to TMAX 15 LM4040BIM3 LM4040BIZ LM4040BIM7 TA = TJ = TMIN to TMAX 17 TA = TJ = 25C Minimum Operating Current Average Reverse Breakdown Voltage VR/T Temperature Coefficient (2) MIN (1) TEST CONDITIONS mV 45 TA = TJ = TMIN to TMAX IR = 10 mA 60 20 TA = TJ = 25C IR = 1 mA ppm/C 15 TA = TJ = TMIN to TMAX IR = 100 A 100 15 IRMIN IR 1 mA 1 mA IR 15 mA TA = TJ = 25C 0.3 TA = TJ = TMIN to TMAX TA = TJ = 25C A 65 ppm/C ppm/C 0.8 1 2.5 TA = TJ = TMIN to TMAX 6 8 mV mV ZR Reverse Dynamic Impedance IR = 1 mA, f = 120 Hz, IAC = 0.1 IR 0.3 eN Wideband Noise IR = 100 A 10 Hz f 10 kHz 35 Vrms VR Reverse Breakdown Voltage Long Term Stability t = 1000 hrs T = 25C 0.1C IR = 100 A 120 ppm VHYST Thermal Hysteresis (4) T = -40C to 125C (1) (2) (3) (4) 0.8 0.08% Limits are 100% production tested at 25C. Limits over temperature are ensured through correlation using Statistical Quality Control (SQC) methods. The limits are used to calculate AOQL. The overtemperature limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage Tolerance [(VR/T)(maxT)(VR)]. Where, VR/T is the VR temperature coefficient, maxT is the maximum difference in temperature from the reference point of 25C to T MIN or TMAX, and VR is the reverse breakdown voltage. The total overtemperature tolerance for the different grades in the industrial temperature range where maxT = 65C is shown below: A-grade: 0.75% = 0.1% 100 ppm/C x 65C B-grade: 0.85% = 0.2% 100 ppm/C x 65C C-grade: 1.15% = 0.5% 100 ppm/C x 65C D-grade: 1.98% = 1.0% 150 ppm/C x 65C E-grade: 2.98% = 2.0% 150 ppm/C x 65C The total overtemperature tolerance for the different grades in the extended temperature range where max T = 100 C is shown below: C-grade: 1.5% = 0.5% 100 ppm/C x 100C D-grade: 2.5% = 1.0% 150 ppm/C x 100C E-grade: 3.5% = 2.0% 150 ppm/C x 100C Therefore, as an example, the A-grade 2.5-V LM4040-N has an overtemperature Reverse Breakdown Voltage tolerance of 2.5 V x 0.75% = 19 mV. Load regulation is measured on pulse basis from no load to the specified load current. Output changes due to die temperature change must be taken into account separately. Thermal hysteresis is defined as the difference in voltage measured at 25C after cycling to temperature -40C and the 25C measurement after cycling to temperature 125C. Copyright (c) 2000-2016, Texas Instruments Incorporated Product Folder Links: LM4040-N LM4040-N-Q1 Submit Documentation Feedback 7 LM4040-N, LM4040-N-Q1 SNOS633K - OCTOBER 2000 - REVISED JUNE 2016 www.ti.com 6.6 Electrical Characteristics: 2-V LM4040-N VR Tolerance Grades 'C', 'D', And 'E'; Temperature Grade 'I' all other limits TA = TJ = 25C. The grades C, D and E designate initial Reverse Breakdown Voltage tolerances of 0.5%, 1% and 2%, respectively. PARAMETER Reverse Breakdown Voltage VR IRMIN MIN (1) TEST CONDITIONS IR = 100 A Reverse Breakdown I = 100 A Voltage Tolerance (3) R Minimum Operating Current VR/T IR = 1 mA TA = TJ = 25C 10 TA = TJ = TMIN to TMAX 23 LM4040DIM3 LM4040DIZ LM4040DIM7 TA = TJ = 25C 20 TA = TJ = TMIN to TMAX 40 LM4040EIZ LM4040EIM7 TA = TJ = 25C 41 LM4040CIM3 LM4040CIZ LM4040CIM7 TA = TJ = 25C LM4040DIM3 LM4040DIZ LM4040DIM7 TA = TJ = 25C LM4040EIZ LM4040EIM7 TA = TJ = 25C TA = TJ = TMIN to TMAX (2) (3) 8 UNIT V LM4040CIM3 LM4040CIZ LM4040CIM7 mV 60 45 TA = TJ = TMIN to TMAX 60 65 45 TA = TJ = TMIN to TMAX 65 A 70 45 TA = TJ = TMIN to TMAX 65 70 20 LM4040CIM3 LM4040CIZ LM4040CIM7 TA = TJ = 25C LM4040DIM3 LM4040DIZ LM4040DIM7 TA = TJ = 25C LM4040EIZ LM4040EIM7 TA = TJ = 25C 15 TA = TJ = TMIN to TMAX 100 15 TA = TJ = TMIN to TMAX ppm/C 150 15 TA = TJ = TMIN to TMAX 150 IR = 100 A (1) MAX (1) 2.048 IR = 10 mA Average Reverse Breakdown Voltage Temperature Coefficient (3) TYP (2) 15 Limits are 100% production tested at 25C. Limits over temperature are ensured through correlation using Statistical Quality Control (SQC) methods. The limits are used to calculate AOQL. Typicals are at TJ = 25C and represent most likely parametric norm. The overtemperature limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage Tolerance [(VR/T)(maxT)(VR)]. Where, VR/T is the VR temperature coefficient, maxT is the maximum difference in temperature from the reference point of 25C to T MIN or TMAX, and VR is the reverse breakdown voltage. The total overtemperature tolerance for the different grades in the industrial temperature range where maxT = 65C is shown below: A-grade: 0.75% = 0.1% 100 ppm/C x 65C B-grade: 0.85% = 0.2% 100 ppm/C x 65C C-grade: 1.15% = 0.5% 100 ppm/C x 65C D-grade: 1.98% = 1.0% 150 ppm/C x 65C E-grade: 2.98% = 2.0% 150 ppm/C x 65C The total overtemperature tolerance for the different grades in the extended temperature range where max T = 100 C is shown below: C-grade: 1.5% = 0.5% 100 ppm/C x 100C D-grade: 2.5% = 1.0% 150 ppm/C x 100C E-grade: 3.5% = 2.0% 150 ppm/C x 100C Therefore, as an example, the A-grade 2.5-V LM4040-N has an overtemperature Reverse Breakdown Voltage tolerance of 2.5V x 0.75% = 19 mV. Submit Documentation Feedback Copyright (c) 2000-2016, Texas Instruments Incorporated Product Folder Links: LM4040-N LM4040-N-Q1 LM4040-N, LM4040-N-Q1 www.ti.com SNOS633K - OCTOBER 2000 - REVISED JUNE 2016 Electrical Characteristics: 2-V LM4040-N VR Tolerance Grades 'C', 'D', And 'E'; Temperature Grade 'I' (continued) all other limits TA = TJ = 25C. The grades C, D and E designate initial Reverse Breakdown Voltage tolerances of 0.5%, 1% and 2%, respectively. PARAMETER TEST CONDITIONS IRMIN IR 1 mA VR/IR Reverse Breakdown Voltage Change with Operating Current Change (4) 1 mA IR 15 mA ZR eN VR VHYST (4) (5) Reverse Dynamic Impedance IR = 1 mA, f = 120 Hz IAC = 0.1 IR Wideband Noise IR = 100 A 10 Hz f 10 kHz Reverse Breakdown Voltage Long Term Stability t = 1000 hrs T = 25C 0.1C IR = 100 A Thermal Hysteresis (5) T = -40C to 125C LM4040CIM3 LM4040CIZ LM4040CIM7 TA = TJ = 25C LM4040DIM3 LM4040DIZ LM4040DIM7 TA = TJ = 25C LM4040EIZ LM4040EIM7 TA = TJ = 25C LM4040CIM3 LM4040CIZ LM4040CIM7 TA = TJ = 25C LM4040DIM3 LM4040DIZ LM4040DIM7 TA = TJ = 25C LM4040EIZ LM4040EIM7 TA = TJ = 25C MIN (1) TYP (2) MAX (1) 0.3 0.8 TA = TJ = TMIN to TMAX UNIT 1 0.3 TA = TJ = TMIN to TMAX 1 1.2 0.3 TA = TJ = TMIN to TMAX 1 1.2 2.5 TA = TJ = TMIN to TMAX mV 6 8 2.5 TA = TJ = TMIN to TMAX 8 10 2.5 TA = TJ = TMIN to TMAX 8 10 LM4040CIM3 LM4040CIZ LM4040CIM7 0.3 0.9 LM4040DIM3 LM4040DIZ LM4040DIM7 0.3 1.1 LM4040EIZ LM4040EIM7 0.3 1.1 35 Vrms 120 ppm 0.08% Load regulation is measured on pulse basis from no load to the specified load current. Output changes due to die temperature change must be taken into account separately. Thermal hysteresis is defined as the difference in voltage measured at 25C after cycling to temperature -40C and the 25C measurement after cycling to temperature 125C. Copyright (c) 2000-2016, Texas Instruments Incorporated Product Folder Links: LM4040-N LM4040-N-Q1 Submit Documentation Feedback 9 LM4040-N, LM4040-N-Q1 SNOS633K - OCTOBER 2000 - REVISED JUNE 2016 www.ti.com 6.7 Electrical Characteristics: 2-V LM4040-N VR Tolerance Grades 'C', 'D', And 'E'; Temperature Grade 'E' all other limits TA = TJ = 25C. The grades C, D and E designate initial Reverse Breakdown Voltage tolerances of 0.5%, 1% and 2%, respectively. PARAMETER Reverse Breakdown Voltage IR = 100 A Reverse Breakdown Voltage Tolerance (3) IR = 100 A LM4040DEM3 LM4040EEM3 LM4040CEM3 IRMIN Minimum Operating Current LM4040DEM3 LM4040EEM3 LM4040DEM3 LM4040EEM3 10 30 TA = TJ = 25C 20 TA = TJ = TMIN to TMAX 50 TA = TJ = 25C 41 45 TA = TJ = TMIN to TMAX R LM4040DEM3 LM4040EEM3 Reverse Breakdown Voltage Change with Operating Current Change (4) LM4040CEM3 1 mA IR 15 mA LM4040DEM3 LM4040EEM3 (1) (2) (3) (4) 10 60 68 TA = TJ = 25C 45 TA = TJ = TMIN to TMAX 65 73 TA = TJ = 25C 45 TA = TJ = TMIN to TMAX A 65 73 TA = TJ = 25C 15 TA = TJ = TMIN to TMAX 100 TA = TJ = 25C 15 TA = TJ = TMIN to TMAX 150 TA = TJ = 25C ppm/C 15 TA = TJ = TMIN to TMAX 150 15 LM4040CEM3 VR/I mV 70 TA = TJ = 25C IR = 100 A IRMIN IR 1 mA V TA = TJ = TMIN to TMAX TA = TJ = TMIN to TMAX UNIT 20 LM4040CEM3 IR = 1 mA MAX (1) TA = TJ = 25C IR = 10 mA Average Reverse Breakdown Voltage VR/T Temperature Coefficient (3) TYP (2) 2.048 LM4040CEM3 VR MIN (1) TEST CONDITIONS TA = TJ = 25C 0.3 TA = TJ = TMIN to TMAX 0.8 1 TA = TJ = 25C 0.3 TA = TJ = TMIN to TMAX 1 1.2 TA = TJ = 25C 0.3 TA = TJ = TMIN to TMAX 1 1.2 TA = TJ = 25C 2.5 TA = TJ = TMIN to TMAX 6 mV 8 TA = TJ = 25C 2.5 TA = TJ = TMIN to TMAX 8 10 TA = TJ = 25C 2.5 TA = TJ = TMIN to TMAX 8 10 Limits are 100% production tested at 25C. Limits over temperature are ensured through correlation using Statistical Quality Control (SQC) methods. The limits are used to calculate AOQL. Typicals are at TJ = 25C and represent most likely parametric norm. The overtemperature limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage Tolerance [(VR/T)(maxT)(VR)]. Where, VR/T is the VR temperature coefficient, maxT is the maximum difference in temperature from the reference point of 25C to T MIN or TMAX, and VR is the reverse breakdown voltage. The total overtemperature tolerance for the different grades in the industrial temperature range where maxT = 65C is shown below: A-grade: 0.75% = 0.1% 100 ppm/C x 65C B-grade: 0.85% = 0.2% 100 ppm/C x 65C C-grade: 1.15% = 0.5% 100 ppm/C x 65C D-grade: 1.98% = 1.0% 150 ppm/C x 65C E-grade: 2.98% = 2.0% 150 ppm/C x 65C The total overtemperature tolerance for the different grades in the extended temperature range where max T = 100 C is shown below: C-grade: 1.5% = 0.5% 100 ppm/C x 100C D-grade: 2.5% = 1.0% 150 ppm/C x 100C E-grade: 3.5% = 2.0% 150 ppm/C x 100C Therefore, as an example, the A-grade 2.5-V LM4040-N has an overtemperature Reverse Breakdown Voltage tolerance of 2.5V x 0.75% = 19 mV. Load regulation is measured on pulse basis from no load to the specified load current. Output changes due to die temperature change must be taken into account separately. Submit Documentation Feedback Copyright (c) 2000-2016, Texas Instruments Incorporated Product Folder Links: LM4040-N LM4040-N-Q1 LM4040-N, LM4040-N-Q1 www.ti.com SNOS633K - OCTOBER 2000 - REVISED JUNE 2016 Electrical Characteristics: 2-V LM4040-N VR Tolerance Grades 'C', 'D', And 'E'; Temperature Grade 'E' (continued) all other limits TA = TJ = 25C. The grades C, D and E designate initial Reverse Breakdown Voltage tolerances of 0.5%, 1% and 2%, respectively. PARAMETER ZR eN VR VHYST (5) Reverse Dynamic Impedance MIN (1) TYP (2) MAX (1) LM4040CEM3 0.3 0.9 LM4040DEM3 0.3 1.1 LM4040EEM3 0.3 1.1 TEST CONDITIONS IR = 1 mA, f = 120 Hz, IAC = 0.1 IR Wideband Noise IR = 100 A 10 Hz f 10 kHz Reverse Breakdown Voltage Long Term Stability t = 1000 hrs T = 25C 0.1C IR = 100 A Thermal Hysteresis (5) T = -40C to 125C UNIT 35 Vrms 120 ppm 0.08% Thermal hysteresis is defined as the difference in voltage measured at 25C after cycling to temperature -40C and the 25C measurement after cycling to temperature 125C. 6.8 Electrical Characteristics: 2.5-V LM4040-N VR Tolerance Grades 'A' And 'B'; Temperature Grade 'I' (AEC Grade 3) all other limits TA = TJ = 25C. The grades A and B designate initial Reverse Breakdown Voltage tolerances of 0.1% and 0.2%, respectively. PARAMETER Reverse Breakdown Voltage VR IRMIN Reverse Breakdown Voltage Tolerance (3) (2) (3) IR = 100 A MIN (1) TYP (2) MAX (1) UNIT 2.5 IR = 100 A V LM4040AIM3 LM4040AIZ LM4040AIM3 TA = TJ = 25C 2.5 TA = TJ = TMIN to TMAX 19 LM4040BIM3 LM4040BIZ LM4040BIM7 LM4040QBIM3 TA = TJ = 25C 21 45 TA = TJ = TMIN to TMAX IR = 10 mA mV 5 TA = TJ = TMIN to TMAX TA = TJ = 25C Minimum Operating Current Average Reverse Breakdown Voltage VR/T Temperature Coefficient (3) (1) TEST CONDITIONS 60 A 65 20 TA = TJ = 25C IR = 1 mA 15 TA = TJ = TMIN to TMAX IR = 100 A 100 ppm/C 15 Limits are 100% production tested at 25C. Limits over temperature are ensured through correlation using Statistical Quality Control (SQC) methods. The limits are used to calculate AOQL. Typicals are at TJ = 25C and represent most likely parametric norm. The overtemperature limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage Tolerance [(VR/T)(maxT)(VR)]. Where, VR/T is the VR temperature coefficient, maxT is the maximum difference in temperature from the reference point of 25C to T MIN or TMAX, and VR is the reverse breakdown voltage. The total overtemperature tolerance for the different grades in the industrial temperature range where maxT = 65C is shown below: A-grade: 0.75% = 0.1% 100 ppm/C x 65C B-grade: 0.85% = 0.2% 100 ppm/C x 65C C-grade: 1.15% = 0.5% 100 ppm/C x 65C D-grade: 1.98% = 1.0% 150 ppm/C x 65C E-grade: 2.98% = 2.0% 150 ppm/C x 65C The total overtemperature tolerance for the different grades in the extended temperature range where max T = 100 C is shown below: C-grade: 1.5% = 0.5% 100 ppm/C x 100C D-grade: 2.5% = 1.0% 150 ppm/C x 100C E-grade: 3.5% = 2.0% 150 ppm/C x 100C Therefore, as an example, the A-grade 2.5-V LM4040-N has an overtemperature Reverse Breakdown Voltage tolerance of 2.5V x 0.75% = 19 mV. Copyright (c) 2000-2016, Texas Instruments Incorporated Product Folder Links: LM4040-N LM4040-N-Q1 Submit Documentation Feedback 11 LM4040-N, LM4040-N-Q1 SNOS633K - OCTOBER 2000 - REVISED JUNE 2016 www.ti.com Electrical Characteristics: 2.5-V LM4040-N VR Tolerance Grades 'A' And 'B'; Temperature Grade 'I' (AEC Grade 3) (continued) all other limits TA = TJ = 25C. The grades A and B designate initial Reverse Breakdown Voltage tolerances of 0.1% and 0.2%, respectively. PARAMETER MIN (1) TEST CONDITIONS TA = TJ = 25C TYP (2) MAX (1) 0.3 0.8 UNIT Reverse Breakdown Voltage Change with Operating Current Change (4) IRMIN IR 1 mA ZR Reverse Dynamic Impedance IR = 1 mA, f = 120 Hz, IAC = 0.1 IR 0.3 eN Wideband Noise IR = 100 A 10 Hz f 10 kHz 35 Vrms VR Reverse Breakdown Voltage Long Term Stability t = 1000 hrs T = 25C 0.1C IR = 100 A 120 ppm VHYST Thermal Hysteresis (5) T = -40C to 125C VR/I R (4) (5) 12 1 mA IR 15 mA TA = TJ = TMIN to TMAX 1 TA = TJ = 25C 2.5 TA = TJ = TMIN to TMAX 6 mV 8 0.8 0.08% Load regulation is measured on pulse basis from no load to the specified load current. Output changes due to die temperature change must be taken into account separately. Thermal hysteresis is defined as the difference in voltage measured at 25C after cycling to temperature -40C and the 25C measurement after cycling to temperature 125C. Submit Documentation Feedback Copyright (c) 2000-2016, Texas Instruments Incorporated Product Folder Links: LM4040-N LM4040-N-Q1 LM4040-N, LM4040-N-Q1 www.ti.com SNOS633K - OCTOBER 2000 - REVISED JUNE 2016 6.9 Electrical Characteristics: 2.5-V LM4040-N VR Tolerance Grades 'C', 'D', and 'E'; Temperature Grade 'I' (AEC Grade 3) all other limits TA = TJ = 25C. The grades C, D and E designate initial Reverse Breakdown Voltage tolerances of 0.5%, 1% and 2%, respectively. PARAMETER Reverse Breakdown Voltage VR IRMIN Reverse Breakdown Voltage Tolerance (3) MIN (1) TEST CONDITIONS IR = 100 A IR = 100 A Minimum Operating Current Average Reverse Breakdown Voltage Temperature Coefficient (3) (2) (3) UNIT V LM4040CIZ LM4040CIM3 LM4040CIM7 LM4040QCIM3 TA = TJ = 25C 12 TA = TJ = TMIN to TMAX 29 LM4040DIZ LM4040DIM3 LM4040DIM7 LM4040QDIM3 TA = TJ = 25C 25 TA = TJ = TMIN to TMAX 49 LM4040EIZ LM4040EIM3 LM4040EIM7 LM4040QEIM3 TA = TJ = 25C 50 TA = TJ = TMIN to TMAX 74 LM4040CIZ LM4040CIM3 LM4040CIM7 LM4040QCIM3 TA = TJ = 25C LM4040DIZ LM4040DIM3 LM4040DIM7 LM4040QDIM3 TA = TJ = 25C LM4040EIZ LM4040EIM3 LM4040EIM7 LM4040QEIM3 TA = TJ = 25C LM4040CIZ LM4040CIM3 LM4040CIM7 LM4040QCIM3 TA = TJ = 25C LM4040DIZ LM4040DIM3 LM4040DIM7 LM4040QDIM3 TA = TJ = 25C LM4040EIZ LM4040EIM3 LM4040EIM7 LM4040QEIM3 TA = TJ = 25C 45 TA = TJ = TMIN to TMAX mV 60 65 45 TA = TJ = TMIN to TMAX 65 A 70 45 TA = TJ = TMIN to TMAX 65 70 20 IR = 1 mA 15 TA = TJ = TMIN to TMAX 100 15 TA = TJ = TMIN to TMAX 150 ppm/C 15 TA = TJ = TMIN to TMAX IR = 100 A (1) MAX (1) 2.5 IR = 10 mA VR/T TYP (2) 150 15 Limits are 100% production tested at 25C. Limits over temperature are ensured through correlation using Statistical Quality Control (SQC) methods. The limits are used to calculate AOQL. Typicals are at TJ = 25C and represent most likely parametric norm. The overtemperature limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage Tolerance [(VR/T)(maxT)(VR)]. Where, VR/T is the VR temperature coefficient, maxT is the maximum difference in temperature from the reference point of 25C to T MIN or TMAX, and VR is the reverse breakdown voltage. The total overtemperature tolerance for the different grades in the industrial temperature range where maxT = 65C is shown below: A-grade: 0.75% = 0.1% 100 ppm/C x 65C B-grade: 0.85% = 0.2% 100 ppm/C x 65C C-grade: 1.15% = 0.5% 100 ppm/C x 65C D-grade: 1.98% = 1.0% 150 ppm/C x 65C E-grade: 2.98% = 2.0% 150 ppm/C x 65C The total overtemperature tolerance for the different grades in the extended temperature range where max T = 100 C is shown below: C-grade: 1.5% = 0.5% 100 ppm/C x 100C D-grade: 2.5% = 1.0% 150 ppm/C x 100C E-grade: 3.5% = 2.0% 150 ppm/C x 100C Therefore, as an example, the A-grade 2.5-V LM4040-N has an overtemperature Reverse Breakdown Voltage tolerance of 2.5V x 0.75% = 19 mV. Copyright (c) 2000-2016, Texas Instruments Incorporated Product Folder Links: LM4040-N LM4040-N-Q1 Submit Documentation Feedback 13 LM4040-N, LM4040-N-Q1 SNOS633K - OCTOBER 2000 - REVISED JUNE 2016 www.ti.com Electrical Characteristics: 2.5-V LM4040-N VR Tolerance Grades 'C', 'D', and 'E'; Temperature Grade 'I' (AEC Grade 3) (continued) all other limits TA = TJ = 25C. The grades C, D and E designate initial Reverse Breakdown Voltage tolerances of 0.5%, 1% and 2%, respectively. PARAMETER IRMIN IR 1 mA VR/I R Reverse Breakdown Voltage Change with Operating Current Change (4) 1 mA IR 15 mA ZR eN VR VHYST (4) (5) 14 Reverse Dynamic Impedance MIN (1) TEST CONDITIONS IR = 1 mA, f = 120 Hz IAC = 0.1 IR Wideband Noise IR = 100 A 10 Hz f 10 kHz Reverse Breakdown Voltage Long Term Stability t = 1000 hrs T = 25C 0.1C IR = 100 A Thermal Hysteresis (5) T= -40C to 125C LM4040CIZ LM4040CIM3 LM4040CIM7 LM4040QCIM3 TA = TJ = 25C LM4040DIZ LM4040DIM3 LM4040DIM7 LM4040QDIM3 TA = TJ = 25C LM4040EIZ LM4040EIM3 LM4040EIM7 LM4040QEIM3 TA = TJ = 25C LM4040CIZ LM4040CIM3 LM4040CIM7 LM4040QCIM3 TA = TJ = 25C LM4040DIZ LM4040DIM3 LM4040DIM7 LM4040QDIM3 TA = TJ = 25C LM4040EIZ LM4040EIM3 LM4040EIM7 LM4040QEIM3 TA = TJ = 25C TYP (2) MAX (1) 0.3 0.8 TA = TJ = TMIN to TMAX UNIT 1 0.3 TA = TJ = TMIN to TMAX 1 1.2 0.3 TA = TJ = TMIN to TMAX 1 1.2 2.5 TA = TJ = TMIN to TMAX 6 mV 8 2.5 TA = TJ = TMIN to TMAX 8 10 2.5 TA = TJ = TMIN to TMAX 8 10 LM4040CIZ LM4040CIM3 LM4040CIM7 LM4040QCIM3 0.3 0.9 LM4040DIZ LM4040DIM3 LM4040DIM7 LM4040QDIM3 0.3 1.1 LM4040EIZ LM4040EIM3 LM4040EIM7 LM4040QEIM3 0.3 1.1 35 Vrms 120 ppm 0.08% Load regulation is measured on pulse basis from no load to the specified load current. Output changes due to die temperature change must be taken into account separately. Thermal hysteresis is defined as the difference in voltage measured at 25C after cycling to temperature -40C and the 25C measurement after cycling to temperature 125C. Submit Documentation Feedback Copyright (c) 2000-2016, Texas Instruments Incorporated Product Folder Links: LM4040-N LM4040-N-Q1 LM4040-N, LM4040-N-Q1 www.ti.com SNOS633K - OCTOBER 2000 - REVISED JUNE 2016 6.10 Electrical Characteristics: 2.5-V LM4040-N VR Tolerance Grades 'C', 'D', And 'E'; Temperature Grade 'E' (AEC Grade 1) all other limits TA = TJ = 25C. The grades C, D and E designate initial Reverse Breakdown Voltage tolerances of 0.5%, 1% and 2%, respectively. PARAMETER Reverse Breakdown Voltage VR IRMIN IR = 100 A Minimum Operating Current VR/T 12 TA = TJ = TMIN to TMAX 38 LM4040DEM3 LM4040QDEM3 TA = TJ = 25C 25 TA = TJ = TMIN to TMAX 63 LM4040EEM3 LM4040QEEM3 TA = TJ = 25C 50 LM4040CEM3 LM4040QCEM3 TA = TJ = 25C LM4040DEM3 LM4040QDEM3 TA = TJ = 25C LM4040EEM3 LM4040QEEM3 TA = TJ = 25C TA = TJ = TMIN to TMAX (2) (3) (4) mV 88 45 TA = TJ = TMIN to TMAX 60 68 45 TA = TJ = TMIN to TMAX 65 A 73 45 TA = TJ = TMIN to TMAX 65 73 20 IR = 1 mA LM4040CEM3 LM4040QCEM3 TA = TJ = 25C LM4040DEM3 LM4040QDEM3 TA = TJ = 25C LM4040EEM3 LM4040QEEM3 TA = TJ = 25C LM4040CEM3 LM4040QCEM3 TA = TJ = 25C LM4040DEM3 LM4040QDEM3 TA = TJ = 25C LM4040EEM3 LM4040QEEM3 TA = TJ = 25C LM4040CEM3 LM4040QCEM3 TA = TJ = 25C LM4040DEM3 LM4040QDEM3 TA = TJ = 25C LM4040EEM3 LM4040QEEM3 TA = TJ = 25C 15 TA = TJ = TMIN to TMAX 100 15 TA = TJ = TMIN to TMAX 150 ppm/C 15 TA = TJ = TMIN to TMAX 150 15 Reverse Breakdown Voltage Change with Operating Current Change (4) 1 mA IR 15 mA (1) UNIT V TA = TJ = 25C IR = 10 mA IRMIN IR 1 mA R MAX (1) LM4040CEM3 LM4040QCEM3 IR = 100 A VR/I TYP (2) 2.5 Reverse Breakdown I = 100 A Voltage Tolerance (3) R Average Reverse Breakdown Voltage Temperature Coefficient (3) MIN (1) TEST CONDITIONS 0.3 TA = TJ = TMIN to TMAX 1 0.3 TA = TJ = TMIN to TMAX 1 1.2 0.3 TA = TJ = TMIN to TMAX 1 1.2 2.5 TA = TJ = TMIN to TMAX 6 mV 8 2.5 TA = TJ = TMIN to TMAX TA = TJ = TMIN to TMAX 0.8 8 10 2.5 8 10 Limits are 100% production tested at 25C. Limits over temperature are ensured through correlation using Statistical Quality Control (SQC) methods. The limits are used to calculate AOQL. Typicals are at TJ = 25C and represent most likely parametric norm. The overtemperature limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage Tolerance [(VR/T)(maxT)(VR)]. Where, VR/T is the VR temperature coefficient, maxT is the maximum difference in temperature from the reference point of 25C to T MIN or TMAX, and VR is the reverse breakdown voltage. The total overtemperature tolerance for the different grades in the industrial temperature range where maxT = 65C is shown below: A-grade: 0.75% = 0.1% 100 ppm/C x 65C B-grade: 0.85% = 0.2% 100 ppm/C x 65C C-grade: 1.15% = 0.5% 100 ppm/C x 65C D-grade: 1.98% = 1.0% 150 ppm/C x 65C E-grade: 2.98% = 2.0% 150 ppm/C x 65C The total overtemperature tolerance for the different grades in the extended temperature range where max T = 100 C is shown below: C-grade: 1.5% = 0.5% 100 ppm/C x 100C D-grade: 2.5% = 1.0% 150 ppm/C x 100C E-grade: 3.5% = 2.0% 150 ppm/C x 100C Therefore, as an example, the A-grade 2.5-V LM4040-N has an overtemperature Reverse Breakdown Voltage tolerance of 2.5V x 0.75% = 19 mV. Load regulation is measured on pulse basis from no load to the specified load current. Output changes due to die temperature change must be taken into account separately. Copyright (c) 2000-2016, Texas Instruments Incorporated Product Folder Links: LM4040-N LM4040-N-Q1 Submit Documentation Feedback 15 LM4040-N, LM4040-N-Q1 SNOS633K - OCTOBER 2000 - REVISED JUNE 2016 www.ti.com Electrical Characteristics: 2.5-V LM4040-N VR Tolerance Grades 'C', 'D', And 'E'; Temperature Grade 'E' (AEC Grade 1) (continued) all other limits TA = TJ = 25C. The grades C, D and E designate initial Reverse Breakdown Voltage tolerances of 0.5%, 1% and 2%, respectively. PARAMETER ZR eN VR VHYST (5) 16 Reverse Dynamic Impedance MIN (1) TYP (2) MAX (1) LM4040CEM3 LM4040QCEM3 0.3 0.9 LM4040DEM3 LM4040QDEM3 0.3 1.1 LM4040EEM3 LM4040QEEM3 0.3 1.1 TEST CONDITIONS IR = 1 mA, f = 120 Hz, IAC = 0.1 IR Wideband Noise IR = 100 A 10 Hz f 10 kHz Reverse Breakdown Voltage Long Term Stability t = 1000 hrs T = 25C 0.1C IR = 100 A Thermal Hysteresis (5) T= -40C to 125C UNIT 35 Vrms 120 ppm 0.08% Thermal hysteresis is defined as the difference in voltage measured at +25C after cycling to temperature -40C and the 25C measurement after cycling to temperature 125C. Submit Documentation Feedback Copyright (c) 2000-2016, Texas Instruments Incorporated Product Folder Links: LM4040-N LM4040-N-Q1 LM4040-N, LM4040-N-Q1 www.ti.com SNOS633K - OCTOBER 2000 - REVISED JUNE 2016 6.11 Electrical Characteristics: 3-V LM4040-N VR Tolerance Grades 'A' And 'B'; Temperature Grade 'I' all other limits TA = TJ = 25C. The grades A and B designate initial Reverse Breakdown Voltage tolerances of 0.1% and 0.2%, respectively. PARAMETER Reverse Breakdown Voltage VR IRMIN Reverse Breakdown Voltage Tolerance (3) TEST CONDITIONS IR = 100 A TYP (2) MAX (1) UNIT 3 IR = 100 A LM4040AIM3 LM4040AIZ TA = TJ = 25C LM4040BIM3 LM4040BIZ LM4040BIM7 TA = TJ = 25C 22 6 TA = TJ = TMIN to TMAX mV 26 47 TA = TJ = TMIN to TMAX IR = 10 mA V 3 TA = TJ = TMIN to TMAX TA = TJ = 25C Minimum Operating Current Average Reverse Breakdown Voltage VR/T Temperature Coefficient (3) MIN (1) 62 A 67 20 TA = TJ = 25C IR = 1 mA 15 TA = TJ = TMIN to TMAX IR = 100 A 100 ppm/C 15 TA = TJ = 25C 0.6 0.8 Reverse Breakdown Voltage Change with Operating Current Change (4) IRMIN IR 1 mA ZR Reverse Dynamic Impedance IR = 1 mA, f = 120 Hz, IAC = 0.1 IR 0.4 eN Wideband Noise IR = 100 A 10 Hz f 10 kHz 35 Vrms VR Reverse Breakdown Voltage Long Term Stability t = 1000 hrs T = 25C 0.1C IR = 100 A 120 ppm VHYST Thermal Hysteresis (5) T = -40C to 125C VR/I R (1) (2) (3) (4) (5) 1 mA IR 15 mA TA = TJ = TMIN to TMAX TA = TJ = 25C 1.1 2.7 TA = TJ = TMIN to TMAX 6 mV 9 0.9 0.08% Limits are 100% production tested at 25C. Limits over temperature are ensured through correlation using Statistical Quality Control (SQC) methods. The limits are used to calculate AOQL. Typicals are at TJ = 25C and represent most likely parametric norm. The overtemperature limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage Tolerance [(VR/T)(maxT)(VR)]. Where, VR/T is the VR temperature coefficient, maxT is the maximum difference in temperature from the reference point of 25C to T MIN or TMAX, and VR is the reverse breakdown voltage. The total overtemperature tolerance for the different grades in the industrial temperature range where maxT = 65C is shown below: A-grade: 0.75% = 0.1% 100 ppm/C x 65C B-grade: 0.85% = 0.2% 100 ppm/C x 65C C-grade: 1.15% = 0.5% 100 ppm/C x 65C D-grade: 1.98% = 1.0% 150 ppm/C x 65C E-grade: 2.98% = 2.0% 150 ppm/C x 65C The total overtemperature tolerance for the different grades in the extended temperature range where max T = 100 C is shown below: C-grade: 1.5% = 0.5% 100 ppm/C x 100C D-grade: 2.5% = 1.0% 150 ppm/C x 100C E-grade: 3.5% = 2.0% 150 ppm/C x 100C Therefore, as an example, the A-grade 2.5-V LM4040-N has an overtemperature Reverse Breakdown Voltage tolerance of 2.5V x 0.75% = 19 mV. Load regulation is measured on pulse basis from no load to the specified load current. Output changes due to die temperature change must be taken into account separately. Thermal hysteresis is defined as the difference in voltage measured at +25C after cycling to temperature -40C and the 25C measurement after cycling to temperature 125C. Copyright (c) 2000-2016, Texas Instruments Incorporated Product Folder Links: LM4040-N LM4040-N-Q1 Submit Documentation Feedback 17 LM4040-N, LM4040-N-Q1 SNOS633K - OCTOBER 2000 - REVISED JUNE 2016 www.ti.com 6.12 Electrical Characteristics: 3-V LM4040-N VR Tolerance Grades 'C', 'D', And 'E'; Temperature Grade 'I' all other limits TA = TJ = 25C. The grades C, D and E designate initial Reverse Breakdown Voltage tolerances of 0.5%, 1% and 2%, respectively. PARAMETER Reverse Breakdown Voltage VR IRMIN MIN (1) TEST CONDITIONS IR = 100 A Reverse Breakdown I = 100 A Voltage Tolerance (3) R Minimum Operating Current IR = 1 mA TA = TJ = 25C 15 TA = TJ = TMIN to TMAX 34 LM4040DIM3 LM4040DIZ LM4040DIM7 TA = TJ = 25C 30 TA = TJ = TMIN to TMAX 59 LM4040EIM7 LM4040EIZ TA = TJ = 25C 60 LM4040CIM3 LM4040CIZ LM4040CIM7 TA = TJ = 25C LM4040DIM3 LM4040DIZ LM4040DIM7 TA = TJ = 25C LM4040EIM7 LM4040EIZ TA = TJ = 25C TA = TJ = TMIN to TMAX (2) (3) 18 UNIT V LM4040CIM3 LM4040CIZ LM4040CIM7 mV 89 45 TA = TJ = TMIN to TMAX 60 65 45 TA = TJ = TMIN to TMAX 65 A 70 45 TA = TJ = TMIN to TMAX 65 70 20 LM4040CIM3 LM4040CIZ LM4040CIM7 TA = TJ = 25C LM4040DIM3 LM4040DIZ LM4040DIM7 TA = TJ = 25C LM4040EIM7 LM4040EIZ TA = TJ = 25C 15 TA = TJ = TMIN to TMAX 100 15 TA = TJ = TMIN to TMAX ppm/C 150 15 TA = TJ = TMIN to TMAX 150 IR = 100 A (1) MAX (1) 3 IR = 10 mA Average Reverse Breakdown Voltage VR/T Temperature Coefficient (3) TYP (2) 15 Limits are 100% production tested at 25C. Limits over temperature are ensured through correlation using Statistical Quality Control (SQC) methods. The limits are used to calculate AOQL. Typicals are at TJ = 25C and represent most likely parametric norm. The overtemperature limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage Tolerance [(VR/T)(maxT)(VR)]. Where, VR/T is the VR temperature coefficient, maxT is the maximum difference in temperature from the reference point of 25C to T MIN or TMAX, and VR is the reverse breakdown voltage. The total overtemperature tolerance for the different grades in the industrial temperature range where maxT = 65C is shown below: A-grade: 0.75% = 0.1% 100 ppm/C x 65C B-grade: 0.85% = 0.2% 100 ppm/C x 65C C-grade: 1.15% = 0.5% 100 ppm/C x 65C D-grade: 1.98% = 1.0% 150 ppm/C x 65C E-grade: 2.98% = 2.0% 150 ppm/C x 65C The total overtemperature tolerance for the different grades in the extended temperature range where max T = 100 C is shown below: C-grade: 1.5% = 0.5% 100 ppm/C x 100C D-grade: 2.5% = 1.0% 150 ppm/C x 100C E-grade: 3.5% = 2.0% 150 ppm/C x 100C Therefore, as an example, the A-grade 2.5-V LM4040-N has an overtemperature Reverse Breakdown Voltage tolerance of 2.5V x 0.75% = 19 mV. Submit Documentation Feedback Copyright (c) 2000-2016, Texas Instruments Incorporated Product Folder Links: LM4040-N LM4040-N-Q1 LM4040-N, LM4040-N-Q1 www.ti.com SNOS633K - OCTOBER 2000 - REVISED JUNE 2016 Electrical Characteristics: 3-V LM4040-N VR Tolerance Grades 'C', 'D', And 'E'; Temperature Grade 'I' (continued) all other limits TA = TJ = 25C. The grades C, D and E designate initial Reverse Breakdown Voltage tolerances of 0.5%, 1% and 2%, respectively. PARAMETER TEST CONDITIONS IRMIN IR 1 mA VR/I R Reverse Breakdown Voltage Change with Operating Current Change (4) 1 mA IR 15 mA ZR eN VR VHYST (4) (5) Reverse Dynamic Impedance IR = 1 mA, f = 120 Hz IAC = 0.1 IR Wideband Noise IR = 100 A 10 Hz f 10 kHz Reverse Breakdown Voltage Long Term Stability t = 1000 hrs T = 25C 0.1C IR = 100 A Thermal Hysteresis (5) T = -40C to 125C LM4040CIM3 LM4040CIZ LM4040CIM7 TA = TJ = 25C LM4040DIM3 LM4040DIZ LM4040DIM7 TA = TJ = 25C LM4040EIM7 LM4040EIZ TA = TJ = 25C LM4040CIM3 LM4040CIZ LM4040CIM7 TA = TJ = 25C LM4040DIM3 LM4040DIZ LM4040DIM7 TA = TJ = 25C LM4040EIM7 LM4040EIZ TA = TJ = 25C MIN (1) TYP (2) MAX (1) 0.4 0.8 TA = TJ = TMIN to TMAX UNIT 1.1 0.4 TA = TJ = TMIN to TMAX 1.1 1.3 0.4 TA = TJ = TMIN to TMAX 1.1 1.3 2.7 TA = TJ = TMIN to TMAX 6 mV 9 2.7 TA = TJ = TMIN to TMAX 8 11 2.7 TA = TJ = TMIN to TMAX 8 11 LM4040CIM3 LM4040CIZ LM4040CIM7 0.4 0.9 LM4040DIM3 LM4040DIZ LM4040DIM7 0.4 1.2 LM4040EIM7 LM4040EIZ 0.4 1.2 35 Vrms 120 ppm 0.08% Load regulation is measured on pulse basis from no load to the specified load current. Output changes due to die temperature change must be taken into account separately. Thermal hysteresis is defined as the difference in voltage measured at +25C after cycling to temperature -40C and the 25C measurement after cycling to temperature 125C. Copyright (c) 2000-2016, Texas Instruments Incorporated Product Folder Links: LM4040-N LM4040-N-Q1 Submit Documentation Feedback 19 LM4040-N, LM4040-N-Q1 SNOS633K - OCTOBER 2000 - REVISED JUNE 2016 www.ti.com 6.13 Electrical Characteristics: 3-V LM4040-N VR Tolerance Grades 'C', 'D', And 'E'; Temperature Grade 'E' all other limits TA = TJ = 25C. The grades C, D and E designate initial Reverse Breakdown Voltage tolerances of 0.5%, 1% and 2%, respectively. PARAMETER MIN (1) TEST CONDITIONS Reverse Breakdown IR = 100 A Voltage Reverse Breakdown I = 100 A Voltage Tolerance (3) R LM4040DEM3 LM4040EEM3 LM4040CEM3 IRMIN Minimum Operating Current LM4040DEM3 LM4040EEM3 15 TA = TJ = TMIN to TMAX 45 TA = TJ = 25C 30 TA = TJ = TMIN to TMAX 75 TA = TJ = 25C IR = 1 mA LM4040DEM3 LM4040EEM3 60 TA = TJ = TMIN to TMAX 105 TA = TJ = 25C 47 TA = TJ = TMIN to TMAX 47 TA = TJ = TMIN to TMAX VR/IR LM4040DEM3 LM4040EEM3 LM4040CEM3 1 mA IR 15 mA LM4040DEM3 LM4040EEM3 (1) (2) (3) (4) 20 67 75 TA = TJ = 25C 47 TA = TJ = TMIN to TMAX A 67 75 TA = TJ = 25C 15 TA = TJ = TMIN to TMAX 100 TA = TJ = 25C 15 TA = TJ = TMIN to TMAX 150 TA = TJ = 25C ppm/C 15 TA = TJ = TMIN to TMAX 150 15 LM4040CEM3 Reverse Breakdown Voltage Change with Operating Current Change (4) 62 70 TA = TJ = 25C IR = 100 A IRMIN IR 1 mA mV 20 LM4040CEM3 VR/T UNIT V TA = TJ = 25C IR = 10 mA Average Reverse Breakdown Voltage Temperature Coefficient (3) MAX (1) 3 LM4040CEM3 VR TYP (2) TA = TJ = 25C 0.4 TA = TJ = TMIN to TMAX 0.8 1.1 TA = TJ = 25C 0.4 TA = TJ = TMIN to TMAX 1.1 1.3 TA = TJ = 25C 0.4 TA = TJ = TMIN to TMAX 1.1 1.3 TA = TJ = 25C 2.7 TA = TJ = TMIN to TMAX 6.0 mV 9 TA = TJ = 25C 2.7 TA = TJ = TMIN to TMAX 8 11.0 TA = TJ = 25C 2.7 TA = TJ = TMIN to TMAX 8 11.0 Limits are 100% production tested at 25C. Limits over temperature are ensured through correlation using Statistical Quality Control (SQC) methods. The limits are used to calculate AOQL. Typicals are at TJ = 25C and represent most likely parametric norm. The (overtemperature) limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage Tolerance [(VR/T)(maxT)(VR)]. Where, VR/T is the VR temperature coefficient, maxT is the maximum difference in temperature from the reference point of 25C to T MIN or TMAX, and VR is the reverse breakdown voltage. The total overtemperature tolerance for the different grades in the industrial temperature range where maxT = 65C is shown below: A-grade: 0.75% = 0.1% 100 ppm/C x 65C B-grade: 0.85% = 0.2% 100 ppm/C x 65C C-grade: 1.15% = 0.5% 100 ppm/C x 65C D-grade: 1.98% = 1.0% 150 ppm/C x 65C E-grade: 2.98% = 2.0% 150 ppm/C x 65C The total overtemperature tolerance for the different grades in the extended temperature range where max T = 100 C is shown below: C-grade: 1.5% = 0.5% 100 ppm/C x 100C D-grade: 2.5% = 1.0% 150 ppm/C x 100C E-grade: 3.5% = 2.0% 150 ppm/C x 100C Therefore, as an example, the A-grade 2.5-V LM4040-N has an overtemperature Reverse Breakdown Voltage tolerance of 2.5V x 0.75% = 19 mV. Load regulation is measured on pulse basis from no load to the specified load current. Output changes due to die temperature change must be taken into account separately. Submit Documentation Feedback Copyright (c) 2000-2016, Texas Instruments Incorporated Product Folder Links: LM4040-N LM4040-N-Q1 LM4040-N, LM4040-N-Q1 www.ti.com SNOS633K - OCTOBER 2000 - REVISED JUNE 2016 Electrical Characteristics: 3-V LM4040-N VR Tolerance Grades 'C', 'D', And 'E'; Temperature Grade 'E' (continued) all other limits TA = TJ = 25C. The grades C, D and E designate initial Reverse Breakdown Voltage tolerances of 0.5%, 1% and 2%, respectively. PARAMETER ZR eN VR VHYST (5) Reverse Dynamic Impedance Wideband Noise MIN (1) TYP (2) MAX (1) LM4040CEM3 0.4 0.9 LM4040DEM3 0.4 1.2 LM4040EEM3 0.4 1.2 TEST CONDITIONS IR = 1 mA, f = 120 Hz, IAC = 0.1 IR IR = 100 A 10 Hz f 10 kHz Reverse Breakdown t = 1000 hrs Voltage Long Term T = 25C 0.1C Stability IR = 100 A Thermal Hysteresis (5) T = -40C to 125C UNIT 35 Vrms 120 ppm 0.08% Thermal hysteresis is defined as the difference in voltage measured at +25C after cycling to temperature -40C and the 25C measurement after cycling to temperature 125C. 6.14 Electrical Characteristics: 4.1-V LM4040-N VR Tolerance Grades 'A' And 'B'; Temperature Grade 'I' all other limits TA = TJ = 25C. The grades A and B designate initial Reverse Breakdown Voltage tolerances of 0.1% and 0.2%, respectively. PARAMETER Reverse Breakdown Voltage VR IRMIN Reverse Breakdown Voltage Tolerance (3) VR/I R (1) (2) (3) (4) IR = 100 A Reverse Breakdown Voltage Change with Operating Current Change (4) TYP (2) MAX (1) 4.096 IR = 100 A TA = TJ = 25C TA = TJ = TMIN to TMAX 31 LM4040BIM3 LM4040BIZ LM4040BIM7 TA = TJ = 25C 8.2 4.1 TA = TJ = TMIN to TMAX mV 35 50 TA = TJ = TMIN to TMAX IR = 10 mA UNIT V LM4040AIM3 LM4040AIZ TA = TJ = 25C Minimum Operating Current Average Reverse Breakdown Voltage VR/T Temperature Coefficient (3) MIN (1) TEST CONDITIONS 68 73 A 30 TA = TJ = 25C IR = 1 mA 20 TA = TJ = TMIN to TMAX IR = 100 A 100 ppm/C 20 IRMIN IR 1 mA 1 mA IR 15 mA TA = TJ = 25C 0.5 TA = TJ = TMIN to TMAX TA = TJ = 25C TA = TJ = TMIN to TMAX 0.9 1.2 3 7 mV 10 Limits are 100% production tested at 25C. Limits over temperature are ensured through correlation using Statistical Quality Control (SQC) methods. The limits are used to calculate AOQL. Typicals are at TJ = 25C and represent most likely parametric norm. The (overtemperature) limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage Tolerance [(VR/T)(maxT)(VR)]. Where, VR/T is the VR temperature coefficient, maxT is the maximum difference in temperature from the reference point of 25C to T MIN or TMAX, and VR is the reverse breakdown voltage. The total overtemperature tolerance for the different grades in the industrial temperature range where maxT = 65C is shown below: A-grade: 0.75% = 0.1% 100 ppm/C x 65C B-grade: 0.85% = 0.2% 100 ppm/C x 65C C-grade: 1.15% = 0.5% 100 ppm/C x 65C D-grade: 1.98% = 1.0% 150 ppm/C x 65C E-grade: 2.98% = 2.0% 150 ppm/C x 65C The total overtemperature tolerance for the different grades in the extended temperature range where max T = 100 C is shown below: C-grade: 1.5% = 0.5% 100 ppm/C x 100C D-grade: 2.5% = 1.0% 150 ppm/C x 100C E-grade: 3.5% = 2.0% 150 ppm/C x 100C Therefore, as an example, the A-grade 2.5-V LM4040-N has an overtemperature Reverse Breakdown Voltage tolerance of 2.5V x 0.75% = 19 mV. Load regulation is measured on pulse basis from no load to the specified load current. Output changes due to die temperature change must be taken into account separately. Copyright (c) 2000-2016, Texas Instruments Incorporated Product Folder Links: LM4040-N LM4040-N-Q1 Submit Documentation Feedback 21 LM4040-N, LM4040-N-Q1 SNOS633K - OCTOBER 2000 - REVISED JUNE 2016 www.ti.com Electrical Characteristics: 4.1-V LM4040-N VR Tolerance Grades 'A' And 'B'; Temperature Grade 'I' (continued) all other limits TA = TJ = 25C. The grades A and B designate initial Reverse Breakdown Voltage tolerances of 0.1% and 0.2%, respectively. PARAMETER MIN (1) TEST CONDITIONS TYP (2) MAX (1) 1 UNIT ZR Reverse Dynamic Impedance IR = 1 mA, f = 120 Hz, IAC = 0.1 IR 0.5 eN Wideband Noise IR = 100 A 10 Hz f 10 kHz 80 Vrms VR Reverse Breakdown Voltage Long Term Stability t = 1000 hrs T = 25C 0.1C IR = 100 A 120 ppm VHYST Thermal Hysteresis (5) T = -40C to 125C (5) 0.08% Thermal hysteresis is defined as the difference in voltage measured at +25C after cycling to temperature -40C and the 25C measurement after cycling to temperature 125C. 6.15 Electrical Characteristics: 4.1-V LM4040-N VR Tolerance Grades 'C' and 'D'; Temperature Grade 'I' all other limits TA = TJ = 25C. The grades C and D designate initial Reverse Breakdown Voltage tolerances of 0.5% and 1%, respectively. PARAMETER Reverse Breakdown Voltage VR Reverse Breakdown Voltage Tolerance (3) IRMIN MIN (1) TEST CONDITIONS IR = 100 A IR = 100 A Minimum Operating Current VR/ T IR = 1 mA TA = TJ = 25C 20 TA = TJ = TMIN to TMAX 47 LM4040DIM3 LM4040DIZ LM4040DIM7 TA = TJ = 25C 41 LM4040CIM3 LM4040CIZ LM4040CIM7 TA = TJ = 25C LM4040DIM3 LM4040DIZ LM4040DIM7 TA = TJ = 25C TA = TJ = TMIN to TMAX (2) (3) 22 UNIT V LM4040CIM3 LM4040CIZ LM4040CIM7 mV 81 50 TA = TJ = TMIN to TMAX 68 73 50 TA = TJ = TMIN to TMAX 73 A 78 30 LM4040CIM3 LM4040CIZ LM4040CIM7 TA = TJ = 25C LM4040DIM3 LM4040DIZ LM4040DIM7 TA = TJ = 25C 20 TA = TJ = TMIN to TMAX 100 ppm/C 20 TA = TJ = TMIN to TMAX 150 IR = 100 A (1) MAX (1) 4.096 IR = 10 mA Average Reverse Breakdown Voltage Temperature Coefficient (3) TYP (2) 20 Limits are 100% production tested at 25C. Limits over temperature are ensured through correlation using Statistical Quality Control (SQC) methods. The limits are used to calculate AOQL. Typicals are at TJ = 25C and represent most likely parametric norm. The (overtemperature) limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage Tolerance [(VR/T)(maxT)(VR)]. Where, VR/T is the VR temperature coefficient, maxT is the maximum difference in temperature from the reference point of 25C to T MIN or TMAX, and VR is the reverse breakdown voltage. The total overtemperature tolerance for the different grades in the industrial temperature range where maxT = 65C is shown below: A-grade: 0.75% = 0.1% 100 ppm/C x 65C B-grade: 0.85% = 0.2% 100 ppm/C x 65C C-grade: 1.15% = 0.5% 100 ppm/C x 65C D-grade: 1.98% = 1.0% 150 ppm/C x 65C E-grade: 2.98% = 2.0% 150 ppm/C x 65C The total overtemperature tolerance for the different grades in the extended temperature range where max T = 100 C is shown below: C-grade: 1.5% = 0.5% 100 ppm/C x 100C D-grade: 2.5% = 1.0% 150 ppm/C x 100C E-grade: 3.5% = 2.0% 150 ppm/C x 100C Therefore, as an example, the A-grade 2.5-V LM4040-N has an overtemperature Reverse Breakdown Voltage tolerance of 2.5V x 0.75% = 19 mV. Submit Documentation Feedback Copyright (c) 2000-2016, Texas Instruments Incorporated Product Folder Links: LM4040-N LM4040-N-Q1 LM4040-N, LM4040-N-Q1 www.ti.com SNOS633K - OCTOBER 2000 - REVISED JUNE 2016 Electrical Characteristics: 4.1-V LM4040-N VR Tolerance Grades 'C' and 'D'; Temperature Grade 'I' (continued) all other limits TA = TJ = 25C. The grades C and D designate initial Reverse Breakdown Voltage tolerances of 0.5% and 1%, respectively. PARAMETER TEST CONDITIONS IRMIN IR 1 mA VR/ IR Reverse Breakdown Voltage Change with Operating Current Change (4) 1 mA IR 15 mA Reverse Dynamic Impedance ZR eN VR Wideband Noise IR = 100 A 10 Hz f 10 kHz Reverse Breakdown Voltage Long Term Stability t = 1000 hrs T = 25C 0.1C IR = 100 A VHYST Thermal Hysteresis (5) (4) (5) IR = 1 mA, f = 120 Hz, IAC = 0.1 IR LM4040CIM3 LM4040CIZ LM4040CIM7 TA = TJ = 25C LM4040DIM3 LM4040DIZ LM4040DIM7 TA = TJ = 25C LM4040CIM3 LM4040CIZ LM4040CIM7 TA = TJ = 25C LM4040DIM3 LM4040DIZ LM4040DIM7 TA = TJ = 25C MIN (1) TYP (2) MAX (1) 0.5 0.9 TA = TJ = TMIN to TMAX UNIT 1.2 0.5 TA = TJ = TMIN to TMAX 1.2 1.5 3 TA = TJ = TMIN to TMAX 7 mV 10 3 TA = TJ = TMIN to TMAX 9 13 LM4040CIM3 LM4040CIZ LM4040CIM7 0.5 LM4040DIM3 LM4040DIZ LM4040DIM7 0.5 1 T = -40C to 125C 1.3 80 Vrms 120 ppm 0.08% Load regulation is measured on pulse basis from no load to the specified load current. Output changes due to die temperature change must be taken into account separately. Thermal hysteresis is defined as the difference in voltage measured at +25C after cycling to temperature -40C and the 25C measurement after cycling to temperature 125C. 6.16 Electrical Characteristics: 5-V LM4040-N VR Tolerance Grades 'A' And 'B'; Temperature Grade 'I' all other limits TA = TJ = 25C. The grades A and B designate initial Reverse Breakdown Voltage tolerances of 0.1% and 0.2%, respectively. PARAMETER Reverse Breakdown Voltage VR (1) (2) (3) Reverse Breakdown Voltage Tolerance (3) TEST CONDITIONS IR = 100 A MIN (1) TYP (2) MAX (1) 5 IR = 100 A UNIT V LM4040AIM3 LM4040AIZ TA = TJ = 25C TA = TJ = TMIN to TMAX 38 5 LM4040BIM3 LM4040BIZ LM4040BIM7 TA = TJ = 25C 10 TA = TJ = TMIN to TMAX 43 mV Limits are 100% production tested at 25C. Limits over temperature are ensured through correlation using Statistical Quality Control (SQC) methods. The limits are used to calculate AOQL. Typicals are at TJ = 25C and represent most likely parametric norm. The (overtemperature) limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage Tolerance [(VR/T)(maxT)(VR)]. Where, VR/T is the VR temperature coefficient, maxT is the maximum difference in temperature from the reference point of 25C to T MIN or TMAX, and VR is the reverse breakdown voltage. The total overtemperature tolerance for the different grades in the industrial temperature range where maxT = 65C is shown below: A-grade: 0.75% = 0.1% 100 ppm/C x 65C B-grade: 0.85% = 0.2% 100 ppm/C x 65C C-grade: 1.15% = 0.5% 100 ppm/C x 65C D-grade: 1.98% = 1.0% 150 ppm/C x 65C E-grade: 2.98% = 2.0% 150 ppm/C x 65C The total overtemperature tolerance for the different grades in the extended temperature range where max T = 100 C is shown below: C-grade: 1.5% = 0.5% 100 ppm/C x 100C D-grade: 2.5% = 1.0% 150 ppm/C x 100C E-grade: 3.5% = 2.0% 150 ppm/C x 100C Therefore, as an example, the A-grade 2.5-V LM4040-N has an overtemperature Reverse Breakdown Voltage tolerance of 2.5V x 0.75% = 19 mV. Copyright (c) 2000-2016, Texas Instruments Incorporated Product Folder Links: LM4040-N LM4040-N-Q1 Submit Documentation Feedback 23 LM4040-N, LM4040-N-Q1 SNOS633K - OCTOBER 2000 - REVISED JUNE 2016 www.ti.com Electrical Characteristics: 5-V LM4040-N VR Tolerance Grades 'A' And 'B'; Temperature Grade 'I' (continued) all other limits TA = TJ = 25C. The grades A and B designate initial Reverse Breakdown Voltage tolerances of 0.1% and 0.2%, respectively. PARAMETER IRMIN TA = TJ = 25C Minimum Operating Current Average Reverse VR/ Breakdown Voltage T Temperature Coefficient (3) Reverse Breakdown VR/ Voltage Change with IR Operating Current Change (4) MIN (1) TEST CONDITIONS TYP (2) MAX (1) 54 74 TA = TJ = TMIN to TMAX 80 IR = 10 mA UNIT A 30 TA = TJ = 25C IR = 1 mA 20 TA = TJ = TMIN to TMAX 100 IR = 100 A ppm/C 20 IRMIN IR 1 mA 1 mA IR 15 mA TA = TJ = 25C 0.5 TA = TJ = TMIN to TMAX 1 1.4 TA = TJ = 25C 3.5 TA = TJ = TMIN to TMAX 8 mV 12 ZR Reverse Dynamic Impedance IR = 1 mA, f = 120 Hz, IAC = 0.1 IR 0.5 eN Wideband Noise IR = 100 A 10 Hz f 10 kHz 80 Vrms Reverse Breakdown Voltage Long Term Stability t = 1000 hrs T = 25C 0.1C IR = 100 A 120 ppm VR VHYST Thermal Hysteresis (5) (4) (5) T = -40C to 125C 1.1 0.08% Load regulation is measured on pulse basis from no load to the specified load current. Output changes due to die temperature change must be taken into account separately. Thermal hysteresis is defined as the difference in voltage measured at +25C after cycling to temperature -40C and the 25C measurement after cycling to temperature 125C. 6.17 Electrical Characteristics: 5-V LM4040-N VR Tolerance Grades 'C' And 'D'; Temperature Grade 'I' all other limits TA = TJ = 25C. The grades C and D designate initial Reverse Breakdown Voltage tolerances of 0.5% and 1%, respectively. PARAMETER Reverse Breakdown Voltage VR (1) (2) (3) 24 Reverse Breakdown Voltage Tolerance (3) MIN (1) TEST CONDITIONS IR = 100 A IR = 100 A TYP (2) MAX (1) 5 UNIT V LM4040CIM3 LM4040CIZ LM4040CIM7 TA = TJ = 25C 25 TA = TJ = TMIN to TMAX 58 LM4040DIM3 LM4040DIZ LM4040DIM7 TA = TJ = 25C 50 TA = TJ = TMIN to TMAX 99 mV Limits are 100% production tested at 25C. Limits over temperature are ensured through correlation using Statistical Quality Control (SQC) methods. The limits are used to calculate AOQL. Typicals are at TJ = 25C and represent most likely parametric norm. The (overtemperature) limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage Tolerance [(VR/T)(maxT)(VR)]. Where, VR/T is the VR temperature coefficient, maxT is the maximum difference in temperature from the reference point of 25C to T MIN or TMAX, and VR is the reverse breakdown voltage. The total overtemperature tolerance for the different grades in the industrial temperature range where maxT = 65C is shown below: A-grade: 0.75% = 0.1% 100 ppm/C x 65C B-grade: 0.85% = 0.2% 100 ppm/C x 65C C-grade: 1.15% = 0.5% 100 ppm/C x 65C D-grade: 1.98% = 1.0% 150 ppm/C x 65C E-grade: 2.98% = 2.0% 150 ppm/C x 65C The total overtemperature tolerance for the different grades in the extended temperature range where max T = 100 C is shown below: C-grade: 1.5% = 0.5% 100 ppm/C x 100C D-grade: 2.5% = 1.0% 150 ppm/C x 100C E-grade: 3.5% = 2.0% 150 ppm/C x 100C Therefore, as an example, the A-grade 2.5-V LM4040-N has an overtemperature Reverse Breakdown Voltage tolerance of 2.5V x 0.75% = 19 mV. Submit Documentation Feedback Copyright (c) 2000-2016, Texas Instruments Incorporated Product Folder Links: LM4040-N LM4040-N-Q1 LM4040-N, LM4040-N-Q1 www.ti.com SNOS633K - OCTOBER 2000 - REVISED JUNE 2016 Electrical Characteristics: 5-V LM4040-N VR Tolerance Grades 'C' And 'D'; Temperature Grade 'I' (continued) all other limits TA = TJ = 25C. The grades C and D designate initial Reverse Breakdown Voltage tolerances of 0.5% and 1%, respectively. PARAMETER IRMIN TEST CONDITIONS Minimum Operating Current LM4040CIM3 LM4040CIZ LM4040CIM7 TA = TJ = 25C LM4040DIM3 LM4040DIZ LM4040DIM7 TA = TJ = 25C LM4040CIM3 LM4040CIZ LM4040CIM7 TA = TJ = 25C LM4040DIM3 LM4040DIZ LM4040DIM7 TA = TJ = 25C LM4040CIM3 LM4040CIZ LM4040CIM7 TA = TJ = 25C LM4040DIM3 LM4040DIZ LM4040DIM7 TA = TJ = 25C LM4040CIM3 LM4040CIZ LM4040CIM7 TA = TJ = 25C LM4040DIM3 LM4040DIZ LM4040DIM7 TA = TJ = 25C IR = 1 mA 1 mA IR 15 mA ZR Reverse Dynamic Impedance IR = 1 mA, f = 120 Hz, IAC = 0.1 IR eN Wideband Noise IR = 100 A 10 Hz f 10 kHz Reverse Breakdown Voltage Long Term Stability t = 1000 hrs T = 25C 0.1C IR = 100 A (5) 74 UNIT 80 54 79 A 85 20 TA = TJ = TMIN to TMAX 100 ppm/C 20 TA = TJ = TMIN to TMAX 150 20 Reverse Breakdown VR/ Voltage Change with IR Operating Current Change (4) (4) 54 30 IRMIN IR 1 mA VHYST Thermal Hysteresis (5) MAX (1) TA = TJ = TMIN to TMAX IR = 100 A VR TYP (2) TA = TJ = TMIN to TMAX IR = 10 mA Average Reverse VR/ Breakdown Voltage T Temperature Coefficient (3) MIN (1) 0.5 TA = TJ = TMIN to TMAX 0.5 TA = TJ = TMIN to TMAX 3.5 8 mV 12 3.5 10 0.5 1.1 TA = TJ = TMIN to TMAX 15 TA = TJ = TMIN to TMAX T = -40C to 125C 1.3 1.8 TA = TJ = TMIN to TMAX TA = TJ = 25C 1 1.4 1.5 80 Vrms 120 ppm 0.08% Load regulation is measured on pulse basis from no load to the specified load current. Output changes due to die temperature change must be taken into account separately. Thermal hysteresis is defined as the difference in voltage measured at +25C after cycling to temperature -40C and the 25C measurement after cycling to temperature 125C. Copyright (c) 2000-2016, Texas Instruments Incorporated Product Folder Links: LM4040-N LM4040-N-Q1 Submit Documentation Feedback 25 LM4040-N, LM4040-N-Q1 SNOS633K - OCTOBER 2000 - REVISED JUNE 2016 www.ti.com 6.18 Electrical Characteristics: 5-V LM4040-N VR Tolerance Grades 'C' And 'D'; Temperature Grade 'E' all other limits TA = TJ = 25C. The grades C and D designate initial Reverse Breakdown Voltage tolerances of 0.5% and 1%, respectively. PARAMETER Reverse Breakdown Voltage IR = 100 A Reverse Breakdown Voltage Tolerance (2) IR = 100 A LM4040DEM3 LM4040CEM3 IRMIN Minimum Operating Current LM4040DEM3 VR/ T 25 75 TA = TJ = 25C 50 TA = TJ = TMIN to TMAX TA = TJ = 25C mV 125 54 TA = TJ = TMIN to TMAX TA = TJ = 25C UNIT V TA = TJ = TMIN to TMAX 74 83 54 TA = TJ = TMIN to TMAX 79 A 88 30 LM4040CEM3 IR = 1 mA LM4040DEM3 TA = TJ = 25C 20 TA = TJ = TMIN to TMAX TA = TJ = 25C 100 20 TA = TJ = TMIN to TMAX IR = 100 A ppm/C 150 20 LM4040CEM3 IRMIN IR 1 mA VR/ IR MAX (1) TA = TJ = 25C IR = 10 mA Average Reverse Breakdown Voltage Temperature Coefficient (2) TYP 5 LM4040CEM3 VR MIN (1) TEST CONDITIONS LM4040DEM3 Reverse Breakdown Voltage Change with Operating Current Change (3) LM4040CEM3 1 mA IR 15 mA LM4040DEM3 TA = TJ = 25C 0.5 TA = TJ = TMIN to TMAX TA = TJ = 25C 0.5 TA = TJ = TMIN to TMAX TA = TJ = 25C 1 1.8 3.5 TA = TJ = TMIN to TMAX TA = TJ = 25C 1 1.4 8 mV 12 3.5 TA = TJ = TMIN to TMAX 8 15 ZR Reverse Dynamic Impedance IR = 1 mA, f = 120 Hz, IAC = 0.1 IR 0.5 eN Wideband Noise IR = 100 A 10 Hz f 10 kHz 80 Vrms Reverse Breakdown Voltage Long Term Stability t = 1000 hrs T = 25C 0.1C IR = 100 A 120 ppm VR VHYST Thermal Hysteresis (4) (1) (2) (3) (4) 26 T = -40C to 125C 1.1 0.08% Limits are 100% production tested at 25C. Limits over temperature are ensured through correlation using Statistical Quality Control (SQC) methods. The limits are used to calculate AOQL. The (overtemperature) limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage Tolerance [(VR/T)(maxT)(VR)]. Where, VR/T is the VR temperature coefficient, maxT is the maximum difference in temperature from the reference point of 25C to T MIN or TMAX, and VR is the reverse breakdown voltage. The total overtemperature tolerance for the different grades in the industrial temperature range where maxT = 65C is shown below: A-grade: 0.75% = 0.1% 100 ppm/C x 65C B-grade: 0.85% = 0.2% 100 ppm/C x 65C C-grade: 1.15% = 0.5% 100 ppm/C x 65C D-grade: 1.98% = 1.0% 150 ppm/C x 65C E-grade: 2.98% = 2.0% 150 ppm/C x 65C The total overtemperature tolerance for the different grades in the extended temperature range where max T = 100 C is shown below: C-grade: 1.5% = 0.5% 100 ppm/C x 100C D-grade: 2.5% = 1.0% 150 ppm/C x 100C E-grade: 3.5% = 2.0% 150 ppm/C x 100C Therefore, as an example, the A-grade 2.5-V LM4040-N has an overtemperature Reverse Breakdown Voltage tolerance of 2.5V x 0.75% = 19 mV. Load regulation is measured on pulse basis from no load to the specified load current. Output changes due to die temperature change must be taken into account separately. Thermal hysteresis is defined as the difference in voltage measured at +25C after cycling to temperature -40C and the 25C measurement after cycling to temperature 125C. Submit Documentation Feedback Copyright (c) 2000-2016, Texas Instruments Incorporated Product Folder Links: LM4040-N LM4040-N-Q1 LM4040-N, LM4040-N-Q1 www.ti.com SNOS633K - OCTOBER 2000 - REVISED JUNE 2016 6.19 Electrical Characteristics: 8.2-V LM4040-N VR Tolerance Grades 'A' And 'B'; Temperature Grade 'I' all other limits TA = TJ = 25C. The grades A and B designate initial Reverse Breakdown Voltage tolerances of 0.1% and 0.2%, respectively. PARAMETER Reverse Breakdown Voltage VR IRMIN Reverse Breakdown Voltage Tolerance (3) TEST CONDITIONS IR = 150 A TYP (2) MAX (1) UNIT 8.192 V LM4040AIM3 LM4040AIZ TA = TJ = 25C 8.2 TA = TJ = TMIN to TMAX 61 LM4040BIM3 LM4040BIZ TA = TJ = 25C 16 IR = 150 A TA = TJ = TMIN to TMAX TA = TJ = 25C Minimum Operating Current Average Reverse Breakdown Voltage VR/T Temperature Coefficient (3) MIN (1) 70 67 TA = TJ = TMIN to TMAX IR = 10 mA mV 91 95 A 40 TA = TJ = 25C IR = 1 mA 20 TA = TJ = TMIN to TMAX IR = 150 A 100 ppm/C 20 TA = TJ = 25C 0.6 1.3 Reverse Breakdown Voltage Change with Operating Current Change (4) IRMIN IR 1 mA ZR Reverse Dynamic Impedance IR = 1 mA, f = 120 Hz, IAC = 0.1 IR 0.6 eN Wideband Noise IR = 150 A 10 Hz f 10 kHz 130 Vrms VR Reverse Breakdown Voltage Long Term Stability t = 1000 hrs T = 25C 0.1C IR = 150 A 120 ppm VHYST Thermal Hysteresis (5) T = -40C to 125C VR/I R (1) (2) (3) (4) (5) 1 mA IR 15 mA TA = TJ = TMIN to TMAX TA = TJ = 25C 2.5 7 TA = TJ = TMIN to TMAX 10 mV 18 1.5 0.08% Limits are 100% production tested at 25C. Limits over temperature are ensured through correlation using Statistical Quality Control (SQC) methods. The limits are used to calculate AOQL. Typicals are at TJ = 25C and represent most likely parametric norm. The (overtemperature) limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage Tolerance [(VR/T)(maxT)(VR)]. Where, VR/T is the VR temperature coefficient, maxT is the maximum difference in temperature from the reference point of 25C to T MIN or TMAX, and VR is the reverse breakdown voltage. The total overtemperature tolerance for the different grades in the industrial temperature range where maxT = 65C is shown below: A-grade: 0.75% = 0.1% 100 ppm/C x 65C B-grade: 0.85% = 0.2% 100 ppm/C x 65C C-grade: 1.15% = 0.5% 100 ppm/C x 65C D-grade: 1.98% = 1.0% 150 ppm/C x 65C E-grade: 2.98% = 2.0% 150 ppm/C x 65C The total overtemperature tolerance for the different grades in the extended temperature range where max T = 100 C is shown below: C-grade: 1.5% = 0.5% 100 ppm/C x 100C D-grade: 2.5% = 1.0% 150 ppm/C x 100C E-grade: 3.5% = 2.0% 150 ppm/C x 100C Therefore, as an example, the A-grade 2.5-V LM4040-N has an overtemperature Reverse Breakdown Voltage tolerance of 2.5V x 0.75% = 19 mV. Load regulation is measured on pulse basis from no load to the specified load current. Output changes due to die temperature change must be taken into account separately. Thermal hysteresis is defined as the difference in voltage measured at +25C after cycling to temperature -40C and the 25C measurement after cycling to temperature 125C. Copyright (c) 2000-2016, Texas Instruments Incorporated Product Folder Links: LM4040-N LM4040-N-Q1 Submit Documentation Feedback 27 LM4040-N, LM4040-N-Q1 SNOS633K - OCTOBER 2000 - REVISED JUNE 2016 www.ti.com 6.20 Electrical Characteristics: 8.2-V Lm4040-N VR Tolerance Grades 'C' And 'D'; Temperature Grade 'I' all other limits TA = TJ = 25C. The grades C and D designate initial Reverse Breakdown Voltage tolerances of 0.5% and 1%, respectively. PARAMETER Reverse Breakdown Voltage VR IRMIN Reverse Breakdown Voltage Tolerance (3) MIN (1) TEST CONDITIONS IR = 150 A TA = TJ = 25C 41 TA = TJ = TMIN to TMAX 94 LM4040DIM3 LM4040DIZ TA = TJ = 25C 82 LM4040CIM3 LM4040CIZ TA = TJ = 25C LM4040DIM3 LM4040DIZ TA = TJ = 25C IR = 150 A TA = TJ = TMIN to TMAX mV 162 67 TA = TJ = TMIN to TMAX 91 95 67 TA = TJ = TMIN to TMAX 96 A 100 40 LM4040CIM3 LM4040CIZ TA = TJ = 25C LM4040DIM3 LM4040DIZ TA = TJ = 25C IR = 1 mA 20 TA = TJ = TMIN to TMAX 100 20 TA = TJ = TMIN to TMAX IR = 150 A ppm/C 150 20 LM4040CIM3 LM4040CIZ TA = TJ = 25C LM4040DIM3 LM4040DIZ TA = TJ = 25C LM4040CIM3 LM4040CIZ TA = TJ = 25C LM4040DIM3 LM4040DIZ TA = TJ = 25C IRMIN IR 1 mA R UNIT V LM4040CIM3 LM4040CIZ IR = 10 mA VR/I MAX (1) 8.192 Minimum Operating Current Average Reverse Breakdown Voltage VR/T Temperature Coefficient (3) TYP (2) Reverse Breakdown Voltage Change with Operating Current Change (4) 1 mA IR 15 mA 0.6 TA = TJ = TMIN to TMAX 1.3 2.5 0.6 1.7 7 10 TA = TJ = TMIN to TMAX 3 TA = TJ = TMIN to TMAX mV 18 7 TA = TJ = TMIN to TMAX 15 24 LM4040CIM3 LM4040CIZ 0.6 1.5 LM4040DIM3 LM4040DIZ 0.6 1.9 Reverse Dynamic Impedance IR = 1 mA, f = 120 Hz, IAC = 0.1 IR Wideband Noise IR = 150 A 10 Hz f 10 kHz 130 Vrms VR Reverse Breakdown Voltage Long Term Stability t = 1000 hrs T = 25C 0.1C IR = 150 A 120 ppm VHYST Thermal Hysteresis (5) T = -40C to 125C ZR eN (1) (2) (3) (4) (5) 28 0.08% Limits are 100% production tested at 25C. Limits over temperature are ensured through correlation using Statistical Quality Control (SQC) methods. The limits are used to calculate AOQL. Typicals are at TJ = 25C and represent most likely parametric norm. The (overtemperature) limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage Tolerance [(VR/T)(maxT)(VR)]. Where, VR/T is the VR temperature coefficient, maxT is the maximum difference in temperature from the reference point of 25C to T MIN or TMAX, and VR is the reverse breakdown voltage. The total overtemperature tolerance for the different grades in the industrial temperature range where maxT = 65C is shown below: A-grade: 0.75% = 0.1% 100 ppm/C x 65C B-grade: 0.85% = 0.2% 100 ppm/C x 65C C-grade: 1.15% = 0.5% 100 ppm/C x 65C D-grade: 1.98% = 1.0% 150 ppm/C x 65C E-grade: 2.98% = 2.0% 150 ppm/C x 65C The total overtemperature tolerance for the different grades in the extended temperature range where max T = 100 C is shown below: C-grade: 1.5% = 0.5% 100 ppm/C x 100C D-grade: 2.5% = 1.0% 150 ppm/C x 100C E-grade: 3.5% = 2.0% 150 ppm/C x 100C Therefore, as an example, the A-grade 2.5-V LM4040-N has an overtemperature Reverse Breakdown Voltage tolerance of 2.5V x 0.75% = 19 mV. Load regulation is measured on pulse basis from no load to the specified load current. Output changes due to die temperature change must be taken into account separately. Thermal hysteresis is defined as the difference in voltage measured at +25C after cycling to temperature -40C and the 25C measurement after cycling to temperature 125C. Submit Documentation Feedback Copyright (c) 2000-2016, Texas Instruments Incorporated Product Folder Links: LM4040-N LM4040-N-Q1 LM4040-N, LM4040-N-Q1 www.ti.com SNOS633K - OCTOBER 2000 - REVISED JUNE 2016 6.21 Electrical Characteristics: 10-V LM4040-N VR Tolerance Grades 'A' And 'B'; Temperature Grade 'I' all other limits TA = TJ = 25C. The grades A and B designate initial Reverse Breakdown Voltage tolerances of 0.1% and 0.2%, respectively. PARAMETER Reverse Breakdown Voltage VR IRMIN Reverse Breakdown Voltage Tolerance (3) TEST CONDITIONS IR = 150 A TYP (2) MAX (1) UNIT 10 V LM4040AIM3 LM4040AIZ TA = TJ = 25C 10 TA = TJ = TMIN to TMAX 75 LM4040BIM3 LM4040BIZ TA = TJ = 25C 20 IR = 150 A TA = TJ = TMIN to TMAX TA = TJ = 25C Minimum Operating Current Average Reverse Breakdown Voltage VR/T Temperature Coefficient (3) MIN (1) 85 75 TA = TJ = TMIN to TMAX IR = 10 mA mV 100 A 103 40 TA = TJ = 25C IR = 1 mA 20 TA = TJ = TMIN to TMAX IR = 150 A 100 ppm/C 20 TA = TJ = 25C 0.8 1.5 Reverse Breakdown Voltage Change with Operating Current Change (4) IRMIN IR 1 mA ZR Reverse Dynamic Impedance IR = 1 mA, f = 120 Hz, IAC = 0.1 IR 0.7 eN Wideband Noise IR = 150 A 10 Hz f 10 kHz 180 Vrms VR Reverse Breakdown Voltage Long Term Stability t = 1000 hrs T = 25C 0.1C IR = 150 A 120 ppm VHYST Thermal Hysteresis (5) T = -40C to 125C VR/I R (1) (2) (3) (4) (5) 1 mA IR 15 mA TA = TJ = TMIN to TMAX TA = TJ = 25C 3.5 8 TA = TJ = TMIN to TMAX 12 mV 23 1.7 0.08% Limits are 100% production tested at 25C. Limits over temperature are ensured through correlation using Statistical Quality Control (SQC) methods. The limits are used to calculate AOQL. Typicals are at TJ = 25C and represent most likely parametric norm. The (overtemperature) limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage Tolerance [(VR/T)(maxT)(VR)]. Where, VR/T is the VR temperature coefficient, maxT is the maximum difference in temperature from the reference point of 25C to T MIN or TMAX, and VR is the reverse breakdown voltage. The total overtemperature tolerance for the different grades in the industrial temperature range where maxT = 65C is shown below: A-grade: 0.75% = 0.1% 100 ppm/C x 65C B-grade: 0.85% = 0.2% 100 ppm/C x 65C C-grade: 1.15% = 0.5% 100 ppm/C x 65C D-grade: 1.98% = 1.0% 150 ppm/C x 65C E-grade: 2.98% = 2.0% 150 ppm/C x 65C The total overtemperature tolerance for the different grades in the extended temperature range where max T = 100 C is shown below: C-grade: 1.5% = 0.5% 100 ppm/C x 100C D-grade: 2.5% = 1.0% 150 ppm/C x 100C E-grade: 3.5% = 2.0% 150 ppm/C x 100C Therefore, as an example, the A-grade 2.5-V LM4040-N has an overtemperature Reverse Breakdown Voltage tolerance of 2.5V x 0.75% = 19 mV. Load regulation is measured on pulse basis from no load to the specified load current. Output changes due to die temperature change must be taken into account separately. Thermal hysteresis is defined as the difference in voltage measured at +25C after cycling to temperature -40C and the 25C measurement after cycling to temperature 125C. Copyright (c) 2000-2016, Texas Instruments Incorporated Product Folder Links: LM4040-N LM4040-N-Q1 Submit Documentation Feedback 29 LM4040-N, LM4040-N-Q1 SNOS633K - OCTOBER 2000 - REVISED JUNE 2016 www.ti.com 6.22 Electrical Characteristics: 10-V LM4040-N VR Tolerance Grades 'C' And 'D'; Temperature Grade 'I' all other limits TA = TJ = 25C. The grades C and D designate initial Reverse Breakdown Voltage tolerances of 0.5% and 1%, respectively. PARAMETER Reverse Breakdown Voltage VR IRMIN Reverse Breakdown Voltage Tolerance (3) MIN (1) TEST CONDITIONS IR = 150 A TA = TJ = 25C TA = TJ = TMIN to TMAX 115 LM4040DIM3 LM4040DIZ TA = TJ = 25C 100 LM4040CIM3 LM4040CIZ TA = TJ = 25C LM4040DIM3 LM4040DIZ TA = TJ = 25C IR = 150 A 50 TA = TJ = TMIN to TMAX mV 198 75 TA = TJ = TMIN to TMAX 100 103 75 TA = TJ = TMIN to TMAX 110 A 113 40 LM4040CIM3 LM4040CIZ TA = TJ = 25C LM4040DIM3 LM4040DIZ TA = TJ = 25C IR = 1 mA 20 TA = TJ = TMIN to TMAX 100 20 TA = TJ = TMIN to TMAX IR = 150 A ppm/C 150 20 LM4040CIM3 LM4040CIZ TA = TJ = 25C LM4040DIM3 LM4040DIZ TA = TJ = 25C LM4040CIM3 LM4040CIZ TA = TJ = 25C LM4040DIM3 LM4040DIZ TA = TJ = 25C IRMIN IR 1 mA R UNIT V LM4040CIM3 LM4040CIZ IR = 10 mA VR/I MAX (1) 10 Minimum Operating Current Average Reverse Breakdown Voltage VR/T Temperature Coefficient (3) TYP (2) Reverse Breakdown Voltage Change with Operating Current Change (4) 1 mA IR 15 mA 0.8 TA = TJ = TMIN to TMAX 3.5 0.8 2 8 12 TA = TJ = TMIN to TMAX 4 TA = TJ = TMIN to TMAX mV 23 8 TA = TJ = TMIN to TMAX LM4040CIM3 LM4040CIZ 1.5 18 29 0.7 1.7 Reverse Dynamic Impedance IR = 1 mA, f = 120 Hz, IAC = 0.1 IR Wideband Noise IR = 150 A 10 Hz f 10 kHz 180 Vrms VR Reverse Breakdown Voltage Long Term Stability t = 1000 hrs T = 25C 0.1C IR = 150 A 120 ppm VHYST Thermal Hysteresis (5) T = -40C to 125C ZR eN (1) (2) (3) (4) (5) 30 LM4040DIM3 LM4040DIZ 2.3 0.08% Limits are 100% production tested at 25C. Limits over temperature are ensured through correlation using Statistical Quality Control (SQC) methods. The limits are used to calculate AOQL. Typicals are at TJ = 25C and represent most likely parametric norm. The (overtemperature) limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage Tolerance [(VR/T)(maxT)(VR)]. Where, VR/T is the VR temperature coefficient, maxT is the maximum difference in temperature from the reference point of 25C to T MIN or TMAX, and VR is the reverse breakdown voltage. The total overtemperature tolerance for the different grades in the industrial temperature range where maxT = 65C is shown below: A-grade: 0.75% = 0.1% 100 ppm/C x 65C B-grade: 0.85% = 0.2% 100 ppm/C x 65C C-grade: 1.15% = 0.5% 100 ppm/C x 65C D-grade: 1.98% = 1.0% 150 ppm/C x 65C E-grade: 2.98% = 2.0% 150 ppm/C x 65C The total overtemperature tolerance for the different grades in the extended temperature range where max T = 100 C is shown below: C-grade: 1.5% = 0.5% 100 ppm/C x 100C D-grade: 2.5% = 1.0% 150 ppm/C x 100C E-grade: 3.5% = 2.0% 150 ppm/C x 100C Therefore, as an example, the A-grade 2.5-V LM4040-N has an overtemperature Reverse Breakdown Voltage tolerance of 2.5V x 0.75% = 19 mV. Load regulation is measured on pulse basis from no load to the specified load current. Output changes due to die temperature change must be taken into account separately. Thermal hysteresis is defined as the difference in voltage measured at +25C after cycling to temperature -40C and the 25C measurement after cycling to temperature 125C. Submit Documentation Feedback Copyright (c) 2000-2016, Texas Instruments Incorporated Product Folder Links: LM4040-N LM4040-N-Q1 LM4040-N, LM4040-N-Q1 www.ti.com SNOS633K - OCTOBER 2000 - REVISED JUNE 2016 6.23 Typical Characteristics Figure 1. Temperature Drift For Different Average Temperature Coefficient Figure 2. Output Impedance vs Frequency Figure 3. Output Impedance vs Frequency Figure 4. Reverse Characteristics And Minimum Operating Current Figure 5. Noise Voltage vs Frequency Copyright (c) 2000-2016, Texas Instruments Incorporated Product Folder Links: LM4040-N LM4040-N-Q1 Submit Documentation Feedback 31 LM4040-N, LM4040-N-Q1 SNOS633K - OCTOBER 2000 - REVISED JUNE 2016 www.ti.com 6.23.1 Start-Up Characteristics RS = 30k RS = 30k Figure 6. Input Voltage Step Response LM4040-N-2.5 Figure 7. Input Voltage Step Response LM4040-N-5 RS = 30k Figure 8. Input Voltage Step Response LM4040-N-10 7 Parameter Measurement Information Figure 9. Test Circuit 32 Submit Documentation Feedback Copyright (c) 2000-2016, Texas Instruments Incorporated Product Folder Links: LM4040-N LM4040-N-Q1 LM4040-N, LM4040-N-Q1 www.ti.com SNOS633K - OCTOBER 2000 - REVISED JUNE 2016 8 Detailed Description 8.1 Overview The LM4040 device is a precision micropower shunt voltage reference available in 7 different fixed-output voltage options and three different packages to meet small footprint requirements. The part is also available in five different tolerance grades. 8.2 Functional Block Diagram 8.3 Feature Description The LM4040 device is effectively a precision Zener diode. The part requires a small quiescent current for regulation, and regulates the output voltage by shunting more or less current to ground, depending on input voltage and load. The only external component requirement is a resistor between the cathode and the input voltage to set the input current. An external capacitor can be used on the input or output, but is not required. 8.4 Device Functional Modes The LM4040 device is a fixed output voltage part, where the feedback is internal. Therefore, the part can only operate is a closed loop mode and the output voltage cannot be adjusted. The output voltage will remain in regulation as long as IR is between IRMIN, see Electrical Characteristics: 2-V LM4040-N VR Tolerance Grades 'A' And 'B'; Temperature Grade 'I', and IRMAX, 15 mA. Proper selection of the external resistor for input voltage range and load current range will ensure these conditions are met. Copyright (c) 2000-2016, Texas Instruments Incorporated Product Folder Links: LM4040-N LM4040-N-Q1 Submit Documentation Feedback 33 LM4040-N, LM4040-N-Q1 SNOS633K - OCTOBER 2000 - REVISED JUNE 2016 www.ti.com 9 Application and Implementation NOTE Information in the following applications sections is not part of the TI component specification, and TI does not warrant its accuracy or completeness. TI's customers are responsible for determining suitability of components for their purposes. Customers should validate and test their design implementation to confirm system functionality. 9.1 Application Information The LM4040-N is a precision micropower curvature-corrected bandgap shunt voltage reference. For space critical applications, the LM4040-N is available in the sub-miniature SOT-23 and SC70 surface-mount package. The LM4040-N has been designed for stable operation without the need of an external capacitor connected between the + pin and the - pin. If, however, a bypass capacitor is used, the LM4040-N remains stable. Reducing design effort is the availability of several fixed reverse breakdown voltages: 2.048 V, 2.5 V, 3 V, 4.096 V, 5 V, 8.192 V, and 10 V. The minimum operating current increases from 60 A for the LM4040-N-2.048 and LM4040-N-2.5 to 100 A for the 10-V LM4040-N. All versions have a maximum operating current of 15 mA. LM4040-Ns in the SOT-23 packages have a parasitic Schottky diode between pin 2 (-) and pin 3 (Die attach interface contact). Therefore, pin 3 of the SOT-23 package must be left floating or connected to pin 2. LM4040-Ns in the SC70 have a parasitic Schottky diode between pin 1 (-) and pin 2 (Die attach interface contact). Therefore, pin 2 must be left floating or connected to pin1. The 4.096-V version allows single 5-V 12-bit ADCs or DACs to operate with an LSB equal to 1 mV. For 12-bit ADCs or DACs that operate on supplies of 10 V or greater, the 8.192-V version gives 2 mV per LSB. The typical thermal hysteresis specification is defined as the change in 25C voltage measured after thermal cycling. The device is thermal cycled to temperature -40C and then measured at 25C. Next the device is thermal cycled to temperature 125C and again measured at 25C. The resulting VOUT delta shift between the 25C measurements is thermal hysteresis. Thermal hysteresis is common in precision references and is induced by thermal-mechanical package stress. Changes in environmental storage temperature, operating temperature and board mounting temperature are all factors that can contribute to thermal hysteresis. In a conventional shunt regulator application (Figure 10) , an external series resistor (RS) is connected between the supply voltage and the LM4040-N. RS determines the current that flows through the load (IL) and the LM4040-N (IQ). Since load current and supply voltage may vary, RS should be small enough to supply at least the minimum acceptable IQ to the LM4040-N even when the supply voltage is at its minimum and the load current is at its maximum value. When the supply voltage is at its maximum and IL is at its minimum, RS should be large enough so that the current flowing through the LM4040-N is less than 15 mA. RS is determined by the supply voltage, (VS), the load and operating current, (IL and IQ), and the LM4040-N's reverse breakdown voltage, VR. (1) 9.2 Typical Applications 9.2.1 Shunt Regulator Figure 10. Shunt Regulator Schematic 34 Submit Documentation Feedback Copyright (c) 2000-2016, Texas Instruments Incorporated Product Folder Links: LM4040-N LM4040-N-Q1 LM4040-N, LM4040-N-Q1 www.ti.com SNOS633K - OCTOBER 2000 - REVISED JUNE 2016 Typical Applications (continued) 9.2.1.1 Design Requirements VIN > VOUT Select RS such that: IRMIN < IR < IRMAX where IRMAX = 15 mA See Electrical Characteristics: 2-V LM4040-N VR Tolerance Grades 'A' And 'B'; Temperature Grade 'I' for minimum operating current for each voltage option and grade. 9.2.1.2 Detailed Design Procedure The resistor RS must be selected such that current IR will remain in the operational region of the part for the entire VIN range and load current range. The two extremes to consider are VIN at its minimum, and the load at its maximum, where RS must be small enough for IR to remain above IRMIN. The other extreme is VIN at its maximum, and the load at its minimum, where RS must be large enough to maintain IR < IRMAX. For most designs, 0.1 mA IR 1 mA is a good starting point. Use Equation 2 and Equation 3 to set RS between RS_MIN and RS_MAX. VIN _ MAX - VOUT RS _ MIN = ILOAD _ MIN + IR _ MAX RS _ MAX = (2) VIN _ MIN - VOUT ILOAD _ MAX + IR _ MIN (3) 9.2.1.3 Application Curve Figure 11. Reverse Characteristics And Minimum Operating Current Copyright (c) 2000-2016, Texas Instruments Incorporated Product Folder Links: LM4040-N LM4040-N-Q1 Submit Documentation Feedback 35 LM4040-N, LM4040-N-Q1 SNOS633K - OCTOBER 2000 - REVISED JUNE 2016 www.ti.com Typical Applications (continued) 9.2.2 4.1-V ADC Application **Ceramic monolithic *Tantalum Figure 12. 4.1-V LM4040-N'S Nominal 4.096 Breakdown Voltage Gives ADC12451 1 MV/LSB 9.2.2.1 Design Requirements The only design requirement is for an output voltage of 4.096 V. 9.2.2.2 Detailed Design Procedure Using an LM4040-4.1, select an appropriate RS to sufficiently power the device. Set the target IR for 1 mA. With an input voltage of 5 V, the resistor can be calculated: 5 V - 4.096 V R= = 904 W 1mA (4) The closest available resistance of 909 is used here, which in turn yields an IR of 994 A. 36 Submit Documentation Feedback Copyright (c) 2000-2016, Texas Instruments Incorporated Product Folder Links: LM4040-N LM4040-N-Q1 LM4040-N, LM4040-N-Q1 www.ti.com SNOS633K - OCTOBER 2000 - REVISED JUNE 2016 Typical Applications (continued) 9.2.3 Bounded Amplifier Nominal clamping voltage is 11.5 V (LM4040-N's reverse breakdown voltage +2 diode VF). Figure 13. Bounded Amplifier Reduces Saturation-Induced Delays and Can Prevent Succeeding Stage Damage 9.2.3.1 Design Requirements Design an amplifier with output clamped at 11.5 V. 9.2.3.2 Detailed Design Procedure With amplifier rails of 15 V, the output can be bound to 11.5 V with the LM4040-10 and two nominal diode voltage drops of 0.7 V. VOUTBound = 2 x VFWD + VZ VOUTBound = 1.4 V + 10 V (5) (6) Select RS = 15 k to keep IR low. Calculate IR to confirm RS selection. IR = (VIN - VOUT) / R, however in this case, the negative supply must be taken into account. IR = (VIN+ - VIN- - VOUT)/R = (30 V - 10 V) / (RS1+RS2) = 20 V / 30 k = 0.667 mA (7) (8) This is an acceptable value for IR that will not draw excessive current, but prevents the part from being starved for current. Copyright (c) 2000-2016, Texas Instruments Incorporated Product Folder Links: LM4040-N LM4040-N-Q1 Submit Documentation Feedback 37 LM4040-N, LM4040-N-Q1 SNOS633K - OCTOBER 2000 - REVISED JUNE 2016 www.ti.com Typical Applications (continued) 9.2.4 Protecting Op-Amp Input The bounding voltage is 4 V with the 2.5-V LM4040-N (LM4040-N's reverse breakdown voltage + 3 diode VF). Figure 14. Protecting Op Amp Input 9.2.4.1 Design Requirements Limit the input voltage to the op-amp to 4 V. 9.2.4.2 Detailed Design Procedure Similar to Bounded Amplifier, this design uses a LM4040-2.5 and three forward diode voltage drops to create a voltage clamp. The procedure for selecting the RS resistors, in this case 5 k, is the same as Detailed Design Procedure. IR = (VIN+ - VIN- - VOUT) / R = (10 V - 2.5 V) / (RS1 + RS2) = 7.5 V / 10 k = 0.750 mA 38 Submit Documentation Feedback (9) Copyright (c) 2000-2016, Texas Instruments Incorporated Product Folder Links: LM4040-N LM4040-N-Q1 LM4040-N, LM4040-N-Q1 www.ti.com SNOS633K - OCTOBER 2000 - REVISED JUNE 2016 Typical Applications (continued) 9.2.5 Precision 4.096-V Reference Figure 15. Precision 4.096-V Reference 9.2.5.1 Design Requirements Use a single voltage reference to create positive and negative reference rails, 4.096 V. 9.2.5.2 Detailed Design Procedure The procedure for selecting the RS resistor is same as detailed in Detailed Design Procedure. The output of the voltage reference is used as the inverting input to the op-amp, with unity gain. Copyright (c) 2000-2016, Texas Instruments Incorporated Product Folder Links: LM4040-N LM4040-N-Q1 Submit Documentation Feedback 39 LM4040-N, LM4040-N-Q1 SNOS633K - OCTOBER 2000 - REVISED JUNE 2016 www.ti.com Typical Applications (continued) 9.2.6 Precision Current Sink/Source Figure 16. Precision 1-mA Current Sink Figure 17. Precision 1-mA Current Source 9.2.6.1 Design Requirements Create precision 1-mA current sink and/or 1-mA current source. 9.2.6.2 Detailed Design Procedure Set R1 such that the current through the shunt reference, IR, is greater than IRMIN. IOUT = VOUT / R2 where VOUT is the voltage drop across the shunt reference. In this case, IOUT = 2.5 / R2 40 Submit Documentation Feedback Copyright (c) 2000-2016, Texas Instruments Incorporated Product Folder Links: LM4040-N LM4040-N-Q1 LM4040-N, LM4040-N-Q1 www.ti.com SNOS633K - OCTOBER 2000 - REVISED JUNE 2016 10 Power Supply Recommendations While a bypass capacitor is not required on the input voltage line, TI recommends reducing noise on the input which could affect the output. A 0.1-F ceramic capacitor or larger is recommended. 11 Layout 11.1 Layout Guidelines Place external components as close to the device as possible. Place RS close the cathode, as well as the input bypass capacitor, if used. 11.2 Layout Example RS physically close to device cathode RS CIN COUT CIN physically close to device COUT physically close to device Figure 18. Layout Diagram Copyright (c) 2000-2016, Texas Instruments Incorporated Product Folder Links: LM4040-N LM4040-N-Q1 Submit Documentation Feedback 41 LM4040-N, LM4040-N-Q1 SNOS633K - OCTOBER 2000 - REVISED JUNE 2016 www.ti.com 12 Device and Documentation Support 12.1 Documentation Support 12.1.1 Related Documentation For related documentation, see the following: LM4041-N/LM4041-N-Q1 Precision Micropower Shunt Voltage Reference, SNOS641 12.2 Related Links The table below lists quick access links. Categories include technical documents, support and community resources, tools and software, and quick access to sample or buy. Table 1. Related Links PARTS PRODUCT FOLDER SAMPLE & BUY TECHNICAL DOCUMENTS TOOLS & SOFTWARE SUPPORT & COMMUNITY LM4040-N Click here Click here Click here Click here Click here LM4040-N-Q1 Click here Click here Click here Click here Click here LM4040-N-Q1 Click here Click here Click here Click here Click here 12.3 Community Resources The following links connect to TI community resources. Linked contents are provided "AS IS" by the respective contributors. They do not constitute TI specifications and do not necessarily reflect TI's views; see TI's Terms of Use. TI E2ETM Online Community TI's Engineer-to-Engineer (E2E) Community. Created to foster collaboration among engineers. At e2e.ti.com, you can ask questions, share knowledge, explore ideas and help solve problems with fellow engineers. Design Support TI's Design Support Quickly find helpful E2E forums along with design support tools and contact information for technical support. 12.4 Trademarks E2E is a trademark of Texas Instruments. All other trademarks are the property of their respective owners. 12.5 Electrostatic Discharge Caution These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates. 12.6 Glossary SLYZ022 -- TI Glossary. This glossary lists and explains terms, acronyms, and definitions. 13 Mechanical, Packaging, And Orderable Information The following pages include mechanical, packaging, and orderable information. This information is the most current data available for the designated devices. This data is subject to change without notice and revision of this document. For browser-based versions of this data sheet, refer to the left-hand navigation. 13.1 SOT-23 and SC70 Package Marking Information Only three fields of marking are possible on the SOT-23's and SC70's small surface. This table gives the meaning of the three fields. First Field: 42 Submit Documentation Feedback Copyright (c) 2000-2016, Texas Instruments Incorporated Product Folder Links: LM4040-N LM4040-N-Q1 LM4040-N, LM4040-N-Q1 www.ti.com SNOS633K - OCTOBER 2000 - REVISED JUNE 2016 SOT-23 and SC70 Package Marking Information (continued) R = Reference Second Field: Voltage Option J = 2.048-V Voltage Option 2 = 2.5-V Voltage Option K = 3-V Voltage Option 4 = 4.096-V Voltage Option 5 = 5-V Voltage Option 8 = 8.192-V Voltage Option 0 = 10-V Voltage Option Third Field: Initial Reverse Breakdown Voltage or Reference Voltage Tolerance A = 0.1% B = 0.2% C = +0.5% D = 1.0% E = 2.0% PART MARKING FIELD DEFINITION RJA (SOT-23 only) Reference, 2.048 V, 0.1% R2A (SOT-23 only) Reference, 2.5 V, 0.1% RKA (SOT-23 only) Reference, 3 V, 0.1% R4A (SOT-23 only) Reference, 4.096 V, 0.1% R5A (SOT-23 only) Reference, 5 V, 0.1% R8A (SOT-23 only) Reference, 8.192 V, 0.1% R0A (SOT-23 only) Reference, 10 V, 0.1% RJB Reference, 2.048 V, 0.2% R2B Reference, 2.5 V, 0.2% RKB Reference, 3 V, 0.2% R4B Reference, 4.096 V, 0.2% R5B Reference, 5 V, 0.2% R8B (SOT-23 only) Reference, 8.192 V, 0.2% R0B (SOT-23 only) Reference, 10 V, 0.2% RJC Reference, 2.048 V, 0.5% R2C Reference, 2.5 V, 0.5% RKC Reference, 3 V, 0.5% R4C Reference, 4.096 V, 0.5% R5C Reference, 5 V, 0.5% R8C (SOT-23 only) Reference, 8.192 V, 0.5% R0C (SOT-23 only) Reference, 10 V, 0.5% RJD Reference, 2.048 V, 1.0% R2D Reference, 2.5 V, 1.0% RKD Reference, 3 V, 1.0% R4D Reference, 4.096 V, 1.0% R5D Reference, 5 V, 1.0% R8D (SOT-23 only) Reference, 8.192 V, 1.0% R0D (SOT-23 only) Reference, 10 V, 1.0% RJE Reference, 2.048 V, 2.0% R2E Reference, 2.5 V, 2.0% RKE Reference, 3 V, 2.0% Copyright (c) 2000-2016, Texas Instruments Incorporated Product Folder Links: LM4040-N LM4040-N-Q1 Submit Documentation Feedback 43 PACKAGE OPTION ADDENDUM www.ti.com 30-Oct-2017 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (C) Device Marking (4/5) LM4040AIM3-10.0 NRND SOT-23 DBZ 3 1000 TBD Call TI Call TI LM4040AIM3-10.0/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R0A LM4040AIM3-2.0 NRND SOT-23 DBZ 3 1000 TBD Call TI Call TI RJA LM4040AIM3-2.0/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM RJA LM4040AIM3-2.5 ACTIVE SOT-23 DBZ 3 1000 TBD Call TI Call TI R2A LM4040AIM3-2.5/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R2A LM4040AIM3-3.0/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM RKA LM4040AIM3-4.1 NRND SOT-23 DBZ 3 1000 TBD Call TI Call TI R4A LM4040AIM3-4.1/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R4A LM4040AIM3-5.0 NRND SOT-23 DBZ 3 1000 TBD Call TI Call TI R5A LM4040AIM3-5.0/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R5A -40 to 85 R0A LM4040AIM3X-10 NRND SOT-23 DBZ 3 3000 TBD Call TI Call TI R0A LM4040AIM3X-10/NOPB ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R0A LM4040AIM3X-2.0/NOPB ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM RJA LM4040AIM3X-2.5 NRND SOT-23 DBZ 3 3000 TBD Call TI Call TI R2A LM4040AIM3X-2.5/NOPB ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R2A LM4040AIM3X-3.0/NOPB ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM RKA LM4040AIM3X-4.1/NOPB ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R4A LM4040AIM3X-5.0 NRND SOT-23 DBZ 3 3000 TBD Call TI Call TI R5A LM4040AIM3X-5.0/NOPB ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R5A Addendum-Page 1 Samples PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 30-Oct-2017 Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (C) Device Marking (4/5) LM4040AIZ-10.0/NOPB ACTIVE TO-92 LP 3 1800 Green (RoHS & no Sb/Br) CU SN N / A for Pkg Type 4040A IZ10 LM4040AIZ-2.5/NOPB ACTIVE TO-92 LP 3 1800 Green (RoHS & no Sb/Br) CU SN N / A for Pkg Type 4040A IZ2.5 LM4040AIZ-4.1/NOPB ACTIVE TO-92 LP 3 1800 Green (RoHS & no Sb/Br) CU SN N / A for Pkg Type 4040A IZ4.1 LM4040AIZ-5.0/NOPB ACTIVE TO-92 LP 3 1800 Green (RoHS & no Sb/Br) CU SN N / A for Pkg Type 4040A IZ5.0 LM4040BIM3-10.0 NRND SOT-23 DBZ 3 1000 TBD Call TI Call TI R0B LM4040BIM3-10.0/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R0B LM4040BIM3-2.0/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM RJB LM4040BIM3-2.5 ACTIVE SOT-23 DBZ 3 1000 TBD Call TI Call TI R2B LM4040BIM3-2.5/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R2B LM4040BIM3-3.0 NRND SOT-23 DBZ 3 1000 TBD Call TI Call TI RKB LM4040BIM3-3.0/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM RKB LM4040BIM3-4.1 NRND SOT-23 DBZ 3 1000 TBD Call TI Call TI R4B LM4040BIM3-4.1/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R4B LM4040BIM3-5.0 NRND SOT-23 DBZ 3 1000 TBD Call TI Call TI R5B LM4040BIM3-5.0/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R5B LM4040BIM3-8.2 NRND SOT-23 DBZ 3 1000 TBD Call TI Call TI R8B LM4040BIM3-8.2/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R8B LM4040BIM3X-10/NOPB ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R0B LM4040BIM3X-2.0/NOPB ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM RJB LM4040BIM3X-2.5 NRND SOT-23 DBZ 3 3000 TBD Call TI Call TI R2B LM4040BIM3X-2.5/NOPB ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R2B Addendum-Page 2 Samples PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 30-Oct-2017 Status (1) LM4040BIM3X-3.0/NOPB Package Type Package Pins Package Drawing Qty ACTIVE SOT-23 DBZ 3 3000 Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (C) Device Marking Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM RKB (4/5) LM4040BIM3X-4.1 NRND SOT-23 DBZ 3 3000 TBD Call TI Call TI R4B LM4040BIM3X-4.1/NOPB ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R4B LM4040BIM3X-5.0/NOPB ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R5B LM4040BIM7-2.0/NOPB ACTIVE SC70 DCK 5 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM RJB LM4040BIM7-2.5 NRND SC70 DCK 5 1000 TBD Call TI Call TI R2B LM4040BIM7-2.5/NOPB ACTIVE SC70 DCK 5 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R2B LM4040BIM7-5.0/NOPB ACTIVE SC70 DCK 5 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R5B LM4040BIM7X-2.5/NOPB ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R2B LM4040BIZ-10.0/NOPB ACTIVE TO-92 LP 3 1800 Green (RoHS & no Sb/Br) CU SN N / A for Pkg Type 4040B IZ10 LM4040BIZ-2.5/NOPB ACTIVE TO-92 LP 3 1800 Green (RoHS & no Sb/Br) CU SN N / A for Pkg Type 4040B IZ2.5 LM4040BIZ-4.1/NOPB ACTIVE TO-92 LP 3 1800 Green (RoHS & no Sb/Br) CU SN N / A for Pkg Type 4040B IZ4.1 LM4040BIZ-5.0/NOPB ACTIVE TO-92 LP 3 1800 Green (RoHS & no Sb/Br) CU SN N / A for Pkg Type 4040B IZ5.0 LM4040CEM3-2.5 NRND SOT-23 DBZ 3 1000 TBD Call TI Call TI R2C LM4040CEM3-2.5/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R2C LM4040CEM3-3.0/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM RKC LM4040CEM3-5.0 NRND SOT-23 DBZ 3 1000 TBD Call TI Call TI R5C LM4040CEM3-5.0/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R5C LM4040CEM3X-3.0/NOPB ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM RKC LM4040CEM3X-5.0/NOPB ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R5C Addendum-Page 3 Samples PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 30-Oct-2017 Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (C) Device Marking (4/5) LM4040CIM3-10.0 NRND SOT-23 DBZ 3 1000 TBD Call TI Call TI R0C LM4040CIM3-10.0/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R0C LM4040CIM3-2.0 NRND SOT-23 DBZ 3 1000 TBD Call TI Call TI RJC LM4040CIM3-2.0/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM RJC LM4040CIM3-2.5 NRND SOT-23 DBZ 3 1000 TBD Call TI Call TI R2C LM4040CIM3-2.5/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R2C LM4040CIM3-3.0 NRND SOT-23 DBZ 3 1000 TBD Call TI Call TI RKC LM4040CIM3-3.0/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM RKC LM4040CIM3-4.1 NRND SOT-23 DBZ 3 1000 TBD Call TI Call TI R4C LM4040CIM3-4.1/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R4C LM4040CIM3-5.0 NRND SOT-23 DBZ 3 1000 TBD Call TI Call TI R5C LM4040CIM3-5.0/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R5C LM4040CIM3-8.2 NRND SOT-23 DBZ 3 1000 TBD Call TI Call TI R8C LM4040CIM3-8.2/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R8C LM4040CIM3X-10/NOPB ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R0C LM4040CIM3X-2.0/NOPB ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM RJC LM4040CIM3X-2.5 NRND SOT-23 DBZ 3 3000 TBD Call TI Call TI R2C LM4040CIM3X-2.5/NOPB ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R2C LM4040CIM3X-3.0/NOPB ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM RKC LM4040CIM3X-4.1/NOPB ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R4C LM4040CIM3X-5.0 NRND SOT-23 DBZ 3 3000 TBD Call TI Call TI R5C LM4040CIM3X-5.0/NOPB ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R5C Addendum-Page 4 Samples PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 30-Oct-2017 Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (C) Device Marking (4/5) LM4040CIM7-2.0/NOPB ACTIVE SC70 DCK 5 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM RJC LM4040CIM7-2.5/NOPB ACTIVE SC70 DCK 5 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R2C LM4040CIM7X-2.5/NOPB ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R2C LM4040CIZ-10.0/NOPB ACTIVE TO-92 LP 3 1800 Green (RoHS & no Sb/Br) CU SN N / A for Pkg Type 4040C IZ10 LM4040CIZ-2.5/LFT8 ACTIVE TO-92 LP 3 2000 Green (RoHS & no Sb/Br) CU SN N / A for Pkg Type 4040C IZ2.5 LM4040CIZ-2.5/NOPB ACTIVE TO-92 LP 3 1800 Green (RoHS & no Sb/Br) CU SN N / A for Pkg Type 4040C IZ2.5 LM4040CIZ-4.1/NOPB ACTIVE TO-92 LP 3 1800 Green (RoHS & no Sb/Br) CU SN N / A for Pkg Type 4040C IZ4.1 LM4040CIZ-5.0/NOPB ACTIVE TO-92 LP 3 1800 Green (RoHS & no Sb/Br) CU SN N / A for Pkg Type 4040C IZ5.0 LM4040DEM3-2.0 NRND SOT-23 DBZ 3 1000 TBD Call TI Call TI RJD LM4040DEM3-2.0/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM RJD LM4040DEM3-2.5/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R2D LM4040DEM3-3.0/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM RKD LM4040DEM3-5.0 NRND SOT-23 DBZ 3 1000 TBD Call TI Call TI R5D LM4040DEM3-5.0/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R5D LM4040DEM3X-2.5/NOPB ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R2D LM4040DEM3X-5.0/NOPB ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R5D LM4040DIM3-10.0 NRND SOT-23 DBZ 3 1000 TBD Call TI Call TI R0D LM4040DIM3-10.0/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R0D LM4040DIM3-2.0/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM RJD LM4040DIM3-2.5 NRND SOT-23 DBZ 3 1000 TBD Call TI Call TI R2D Addendum-Page 5 Samples PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 30-Oct-2017 Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (C) Device Marking (4/5) LM4040DIM3-2.5/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R2D LM4040DIM3-3.0/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM RKD LM4040DIM3-4.1 NRND SOT-23 DBZ 3 1000 TBD Call TI Call TI R4D LM4040DIM3-4.1/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R4D LM4040DIM3-5.0 NRND SOT-23 DBZ 3 1000 TBD Call TI Call TI R5D LM4040DIM3-5.0/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R5D LM4040DIM3-8.2/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R8D LM4040DIM3X-10/NOPB ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R0D LM4040DIM3X-2.0/NOPB ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM RJD LM4040DIM3X-2.5 NRND SOT-23 DBZ 3 3000 TBD Call TI Call TI R2D LM4040DIM3X-2.5/NOPB ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R2D LM4040DIM3X-3.0/NOPB ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM RKD LM4040DIM3X-4.1 NRND SOT-23 DBZ 3 3000 TBD Call TI Call TI R4D LM4040DIM3X-4.1/NOPB ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R4D LM4040DIM3X-5.0 NRND SOT-23 DBZ 3 3000 TBD Call TI Call TI R5D LM4040DIM3X-5.0/NOPB ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R5D LM4040DIM7-2.0/NOPB ACTIVE SC70 DCK 5 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM RJD LM4040DIM7-2.5/NOPB ACTIVE SC70 DCK 5 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R2D LM4040DIM7-5.0 NRND SC70 DCK 5 1000 TBD Call TI Call TI R5D LM4040DIM7-5.0/NOPB ACTIVE SC70 DCK 5 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R5D Addendum-Page 6 Samples PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 30-Oct-2017 Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (C) Device Marking (4/5) LM4040DIZ-10.0/NOPB ACTIVE TO-92 LP 3 1800 Green (RoHS & no Sb/Br) CU SN N / A for Pkg Type 4040D IZ10 LM4040DIZ-2.5/NOPB ACTIVE TO-92 LP 3 1800 Green (RoHS & no Sb/Br) CU SN N / A for Pkg Type 4040D IZ2.5 LM4040DIZ-4.1/NOPB ACTIVE TO-92 LP 3 1800 Green (RoHS & no Sb/Br) CU SN N / A for Pkg Type 4040D IZ4.1 LM4040DIZ-5.0/LFT1 ACTIVE TO-92 LP 3 2000 Green (RoHS & no Sb/Br) CU SN N / A for Pkg Type 4040D IZ5.0 LM4040DIZ-5.0/NOPB ACTIVE TO-92 LP 3 1800 Green (RoHS & no Sb/Br) CU SN N / A for Pkg Type 4040D IZ5.0 LM4040EEM3-2.5/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R2E LM4040EIM3-2.5 NRND SOT-23 DBZ 3 1000 TBD Call TI Call TI R2E LM4040EIM3-2.5/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R2E LM4040EIM3-3.0/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM RKE LM4040EIM3X-2.5 NRND SOT-23 DBZ 3 3000 TBD Call TI Call TI R2E LM4040EIM3X-2.5/NOPB ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R2E LM4040EIM3X-3.0/NOPB ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM RKE LM4040EIM7-2.0/NOPB ACTIVE SC70 DCK 5 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM RJE LM4040QAIM3-2.5/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R6A LM4040QAIM3X2.5/NOPB ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R6A LM4040QBIM3-2.5/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R6B LM4040QBIM3X2.5/NOPB ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R6B LM4040QCEM3-2.5/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R2C LM4040QCEM3-3.0/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM Addendum-Page 7 -40 to 125 R3C Samples PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 30-Oct-2017 Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (C) Device Marking (4/5) LM4040QCIM3-2.5/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R6C LM4040QCIM3X2.5/NOPB ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R6C LM4040QDEM3-2.5/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R2D LM4040QDEM3-3.0/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM LM4040QDIM3-2.5/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R6D LM4040QDIM3X2.5/NOPB ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R6D LM4040QEEM3-2.5/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R2E LM4040QEEM3-3.0/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM LM4040QEIM3-2.5/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R6E LM4040QEIM3X2.5/NOPB ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM R6E -40 to 125 -40 to 125 R3D R3E (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of <=1000ppm threshold. Antimony trioxide based flame retardants must also meet the <=1000ppm threshold requirement. (3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Addendum-Page 8 Samples PACKAGE OPTION ADDENDUM www.ti.com (4) 30-Oct-2017 There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device. (6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish value exceeds the maximum column width. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. OTHER QUALIFIED VERSIONS OF LM4040-N, LM4040-N-Q1 : * Catalog: LM4040-N * Automotive: LM4040-N-Q1 NOTE: Qualified Version Definitions: * Catalog - TI's standard catalog product * Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects Addendum-Page 9 PACKAGE MATERIALS INFORMATION www.ti.com 24-Aug-2017 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ SOT-23 DBZ 3 1000 178.0 8.4 LM4040AIM3-10.0/NOPB SOT-23 LM4040AIM3-10.0 Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant 3.3 2.9 1.22 4.0 8.0 Q3 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040AIM3-2.0 SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040AIM3-2.0/NOPB SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040AIM3-2.5 SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040AIM3-2.5/NOPB SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040AIM3-3.0/NOPB SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040AIM3-4.1 SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040AIM3-4.1/NOPB SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040AIM3-5.0 SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040AIM3-5.0/NOPB SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040AIM3X-10 SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040AIM3X-10/NOPB SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040AIM3X-2.0/NOPB SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040AIM3X-2.5/NOPB SOT-23 LM4040AIM3X-2.5 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040AIM3X-3.0/NOPB SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040AIM3X-4.1/NOPB SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 24-Aug-2017 Device Package Package Pins Type Drawing SPQ SOT-23 DBZ 3 3000 178.0 8.4 LM4040AIM3X-5.0/NOPB SOT-23 DBZ 3 3000 178.0 8.4 LM4040AIM3X-5.0 LM4040BIM3-10.0 Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant 3.3 2.9 1.22 4.0 8.0 Q3 3.3 2.9 1.22 4.0 8.0 Q3 SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040BIM3-10.0/NOPB SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040BIM3-2.0/NOPB SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040BIM3-2.5 SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040BIM3-2.5/NOPB SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040BIM3-3.0 SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040BIM3-3.0/NOPB SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040BIM3-4.1 SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040BIM3-4.1/NOPB SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040BIM3-5.0 SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040BIM3-5.0/NOPB SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040BIM3-8.2 SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040BIM3-8.2/NOPB SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040BIM3X-10/NOPB SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040BIM3X-2.0/NOPB SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040BIM3X-2.5/NOPB SOT-23 LM4040BIM3X-2.5 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040BIM3X-3.0/NOPB SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040BIM3X-4.1/NOPB SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040BIM3X-5.0/NOPB SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040BIM3X-4.1 LM4040BIM7-2.0/NOPB SC70 DCK 5 1000 178.0 8.4 2.25 2.45 1.2 4.0 8.0 Q3 LM4040BIM7-2.5 SC70 DCK 5 1000 178.0 8.4 2.25 2.45 1.2 4.0 8.0 Q3 LM4040BIM7-2.5/NOPB SC70 DCK 5 1000 178.0 8.4 2.25 2.45 1.2 4.0 8.0 Q3 LM4040BIM7-5.0/NOPB SC70 DCK 5 1000 178.0 8.4 2.25 2.45 1.2 4.0 8.0 Q3 LM4040BIM7X-2.5/NOPB SC70 DCK 5 3000 178.0 8.4 2.25 2.45 1.2 4.0 8.0 Q3 LM4040CEM3-2.5 SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040CEM3-2.5/NOPB SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040CEM3-3.0/NOPB SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040CEM3-5.0/NOPB SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040CEM3X-3.0/NOPB SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040CEM3X-5.0/NOPB SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040CIM3-10.0/NOPB SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040CEM3-5.0 LM4040CIM3-10.0 LM4040CIM3-2.0 SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040CIM3-2.0/NOPB SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040CIM3-2.5 SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040CIM3-2.5/NOPB SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040CIM3-3.0 SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040CIM3-3.0/NOPB SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 Pack Materials-Page 2 PACKAGE MATERIALS INFORMATION www.ti.com 24-Aug-2017 Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant LM4040CIM3-4.1 SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040CIM3-4.1/NOPB SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040CIM3-5.0 SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040CIM3-5.0/NOPB SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040CIM3-8.2 SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040CIM3-8.2/NOPB SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040CIM3X-10/NOPB SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040CIM3X-2.0/NOPB SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040CIM3X-2.5/NOPB SOT-23 LM4040CIM3X-2.5 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040CIM3X-3.0/NOPB SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040CIM3X-4.1/NOPB SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040CIM3X-5.0/NOPB SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040CIM3X-5.0 LM4040CIM7-2.0/NOPB SC70 DCK 5 1000 178.0 8.4 2.25 2.45 1.2 4.0 8.0 Q3 LM4040CIM7-2.5/NOPB SC70 DCK 5 1000 178.0 8.4 2.25 2.45 1.2 4.0 8.0 Q3 LM4040CIM7X-2.5/NOPB SC70 DCK 5 3000 178.0 8.4 2.25 2.45 1.2 4.0 8.0 Q3 LM4040DEM3-2.0 SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040DEM3-2.0/NOPB SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040DEM3-2.5/NOPB SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040DEM3-3.0/NOPB SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040DEM3-5.0/NOPB SOT-23 LM4040DEM3-5.0 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040DEM3X-2.5/NOPB SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040DEM3X-5.0/NOPB SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040DIM3-10.0/NOPB SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040DIM3-2.0/NOPB SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040DIM3-2.5 SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040DIM3-2.5/NOPB SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040DIM3-3.0/NOPB SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040DIM3-4.1 SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040DIM3-4.1/NOPB SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040DIM3-10.0 LM4040DIM3-5.0 SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040DIM3-5.0/NOPB SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040DIM3-8.2/NOPB SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040DIM3X-10/NOPB SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040DIM3X-2.0/NOPB SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040DIM3X-2.5/NOPB SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040DIM3X-3.0/NOPB SOT-23 LM4040DIM3X-2.5 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040DIM3X-4.1/NOPB SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040DIM3X-4.1 Pack Materials-Page 3 PACKAGE MATERIALS INFORMATION www.ti.com 24-Aug-2017 Device Package Package Pins Type Drawing SPQ SOT-23 DBZ 3 3000 178.0 8.4 LM4040DIM3X-5.0/NOPB SOT-23 DBZ 3 3000 178.0 8.4 LM4040DIM3X-5.0 Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant 3.3 2.9 1.22 4.0 8.0 Q3 3.3 2.9 1.22 4.0 8.0 Q3 LM4040DIM7-2.0/NOPB SC70 DCK 5 1000 178.0 8.4 2.25 2.45 1.2 4.0 8.0 Q3 LM4040DIM7-2.5/NOPB SC70 DCK 5 1000 178.0 8.4 2.25 2.45 1.2 4.0 8.0 Q3 LM4040DIM7-5.0 SC70 DCK 5 1000 178.0 8.4 2.25 2.45 1.2 4.0 8.0 Q3 LM4040DIM7-5.0/NOPB SC70 DCK 5 1000 178.0 8.4 2.25 2.45 1.2 4.0 8.0 Q3 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040EEM3-2.5/NOPB SOT-23 LM4040EIM3-2.5 SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040EIM3-2.5/NOPB SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040EIM3-3.0/NOPB SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040EIM3X-2.5 SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040EIM3X-2.5/NOPB SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040EIM3X-3.0/NOPB SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 DCK 5 1000 178.0 8.4 2.25 2.45 1.2 4.0 8.0 Q3 LM4040EIM7-2.0/NOPB SC70 LM4040QAIM3-2.5/NOPB SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040QAIM3X2.5/NOPB SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040QBIM3-2.5/NOPB SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040QBIM3X2.5/NOPB SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040QCEM3-2.5/NOP B SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040QCEM3-3.0/NOP B SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040QCIM3-2.5/NOPB SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040QCIM3X2.5/NOP B SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040QDEM3-2.5/NOP B SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040QDEM3-3.0/NOP B SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040QDIM3-2.5/NOPB SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040QDIM3X2.5/NOP B SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040QEEM3-2.5/NOP B SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040QEEM3-3.0/NOP B SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040QEIM3-2.5/NOPB SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4040QEIM3X2.5/NOPB SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 Pack Materials-Page 4 PACKAGE MATERIALS INFORMATION www.ti.com 24-Aug-2017 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) LM4040AIM3-10.0 SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040AIM3-10.0/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040AIM3-2.0 SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040AIM3-2.0/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040AIM3-2.5 SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040AIM3-2.5/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040AIM3-3.0/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040AIM3-4.1 SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040AIM3-4.1/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040AIM3-5.0 SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040AIM3-5.0/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040AIM3X-10 SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4040AIM3X-10/NOPB SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4040AIM3X-2.0/NOPB SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4040AIM3X-2.5 SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4040AIM3X-2.5/NOPB SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4040AIM3X-3.0/NOPB SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4040AIM3X-4.1/NOPB SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4040AIM3X-5.0 SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4040AIM3X-5.0/NOPB SOT-23 DBZ 3 3000 210.0 185.0 35.0 Pack Materials-Page 5 PACKAGE MATERIALS INFORMATION www.ti.com 24-Aug-2017 Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) LM4040BIM3-10.0 SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040BIM3-10.0/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040BIM3-2.0/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040BIM3-2.5 SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040BIM3-2.5/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040BIM3-3.0 SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040BIM3-3.0/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040BIM3-4.1 SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040BIM3-4.1/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040BIM3-5.0 SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040BIM3-5.0/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040BIM3-8.2 SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040BIM3-8.2/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040BIM3X-10/NOPB SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4040BIM3X-2.0/NOPB SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4040BIM3X-2.5 SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4040BIM3X-2.5/NOPB SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4040BIM3X-3.0/NOPB SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4040BIM3X-4.1 SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4040BIM3X-4.1/NOPB SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4040BIM3X-5.0/NOPB SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4040BIM7-2.0/NOPB SC70 DCK 5 1000 210.0 185.0 35.0 LM4040BIM7-2.5 SC70 DCK 5 1000 210.0 185.0 35.0 LM4040BIM7-2.5/NOPB SC70 DCK 5 1000 210.0 185.0 35.0 LM4040BIM7-5.0/NOPB SC70 DCK 5 1000 210.0 185.0 35.0 LM4040BIM7X-2.5/NOPB SC70 DCK 5 3000 210.0 185.0 35.0 LM4040CEM3-2.5 SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040CEM3-2.5/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040CEM3-3.0/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040CEM3-5.0 SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040CEM3-5.0/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040CEM3X-3.0/NOPB SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4040CEM3X-5.0/NOPB SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4040CIM3-10.0 SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040CIM3-10.0/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040CIM3-2.0 SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040CIM3-2.0/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040CIM3-2.5 SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040CIM3-2.5/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040CIM3-3.0 SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040CIM3-3.0/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040CIM3-4.1 SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040CIM3-4.1/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040CIM3-5.0 SOT-23 DBZ 3 1000 210.0 185.0 35.0 Pack Materials-Page 6 PACKAGE MATERIALS INFORMATION www.ti.com 24-Aug-2017 Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) LM4040CIM3-5.0/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040CIM3-8.2 SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040CIM3-8.2/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040CIM3X-10/NOPB SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4040CIM3X-2.0/NOPB SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4040CIM3X-2.5 SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4040CIM3X-2.5/NOPB SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4040CIM3X-3.0/NOPB SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4040CIM3X-4.1/NOPB SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4040CIM3X-5.0 SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4040CIM3X-5.0/NOPB SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4040CIM7-2.0/NOPB SC70 DCK 5 1000 210.0 185.0 35.0 LM4040CIM7-2.5/NOPB SC70 DCK 5 1000 210.0 185.0 35.0 LM4040CIM7X-2.5/NOPB SC70 DCK 5 3000 210.0 185.0 35.0 LM4040DEM3-2.0 SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040DEM3-2.0/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040DEM3-2.5/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040DEM3-3.0/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040DEM3-5.0 SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040DEM3-5.0/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040DEM3X-2.5/NOPB SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4040DEM3X-5.0/NOPB SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4040DIM3-10.0 SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040DIM3-10.0/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040DIM3-2.0/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040DIM3-2.5 SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040DIM3-2.5/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040DIM3-3.0/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040DIM3-4.1 SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040DIM3-4.1/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040DIM3-5.0 SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040DIM3-5.0/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040DIM3-8.2/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040DIM3X-10/NOPB SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4040DIM3X-2.0/NOPB SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4040DIM3X-2.5 SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4040DIM3X-2.5/NOPB SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4040DIM3X-3.0/NOPB SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4040DIM3X-4.1 SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4040DIM3X-4.1/NOPB SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4040DIM3X-5.0 SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4040DIM3X-5.0/NOPB SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4040DIM7-2.0/NOPB SC70 DCK 5 1000 210.0 185.0 35.0 LM4040DIM7-2.5/NOPB SC70 DCK 5 1000 210.0 185.0 35.0 Pack Materials-Page 7 PACKAGE MATERIALS INFORMATION www.ti.com 24-Aug-2017 Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) LM4040DIM7-5.0 SC70 DCK 5 1000 210.0 185.0 35.0 LM4040DIM7-5.0/NOPB SC70 DCK 5 1000 210.0 185.0 35.0 LM4040EEM3-2.5/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040EIM3-2.5 SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040EIM3-2.5/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040EIM3-3.0/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040EIM3X-2.5 SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4040EIM3X-2.5/NOPB SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4040EIM3X-3.0/NOPB SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4040EIM7-2.0/NOPB SC70 DCK 5 1000 210.0 185.0 35.0 LM4040QAIM3-2.5/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040QAIM3X2.5/NOPB SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4040QBIM3-2.5/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040QBIM3X2.5/NOPB SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4040QCEM3-2.5/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040QCEM3-3.0/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040QCIM3-2.5/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040QCIM3X2.5/NOPB SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4040QDEM3-2.5/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040QDEM3-3.0/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040QDIM3-2.5/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040QDIM3X2.5/NOPB SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4040QEEM3-2.5/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040QEEM3-3.0/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040QEIM3-2.5/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4040QEIM3X2.5/NOPB SOT-23 DBZ 3 3000 210.0 185.0 35.0 Pack Materials-Page 8 4203227/C PACKAGE OUTLINE DBZ0003A SOT-23 - 1.12 mm max height SCALE 4.000 SMALL OUTLINE TRANSISTOR C 2.64 2.10 1.4 1.2 PIN 1 INDEX AREA 1.12 MAX B A 0.1 C 1 0.95 3.04 2.80 1.9 3X 3 0.5 0.3 0.2 2 (0.95) C A B 0.25 GAGE PLANE 0 -8 TYP 0.10 TYP 0.01 0.20 TYP 0.08 0.6 TYP 0.2 SEATING PLANE 4214838/C 04/2017 NOTES: 1. All linear dimensions are in millimeters. Any dimensions in parenthesis are for reference only. Dimensioning and tolerancing per ASME Y14.5M. 2. This drawing is subject to change without notice. 3. Reference JEDEC registration TO-236, except minimum foot length. www.ti.com EXAMPLE BOARD LAYOUT DBZ0003A SOT-23 - 1.12 mm max height SMALL OUTLINE TRANSISTOR PKG 3X (1.3) 1 3X (0.6) SYMM 3 2X (0.95) 2 (R0.05) TYP (2.1) LAND PATTERN EXAMPLE SCALE:15X SOLDER MASK OPENING METAL SOLDER MASK OPENING METAL UNDER SOLDER MASK 0.07 MIN ALL AROUND 0.07 MAX ALL AROUND NON SOLDER MASK DEFINED (PREFERRED) SOLDER MASK DEFINED SOLDER MASK DETAILS 4214838/C 04/2017 NOTES: (continued) 4. Publication IPC-7351 may have alternate designs. 5. Solder mask tolerances between and around signal pads can vary based on board fabrication site. www.ti.com EXAMPLE STENCIL DESIGN DBZ0003A SOT-23 - 1.12 mm max height SMALL OUTLINE TRANSISTOR PKG 3X (1.3) 1 3X (0.6) SYMM 3 2X(0.95) 2 (R0.05) TYP (2.1) SOLDER PASTE EXAMPLE BASED ON 0.125 THICK STENCIL SCALE:15X 4214838/C 04/2017 NOTES: (continued) 6. Laser cutting apertures with trapezoidal walls and rounded corners may offer better paste release. IPC-7525 may have alternate design recommendations. 7. Board assembly site may have different recommendations for stencil design. www.ti.com PACKAGE OUTLINE LP0003A TO-92 - 5.34 mm max height SCALE 1.200 SCALE 1.200 TO-92 5.21 4.44 EJECTOR PIN OPTIONAL 5.34 4.32 (1.5) TYP SEATING PLANE (2.54) NOTE 3 2X 4 MAX (0.51) TYP 6X 0.076 MAX SEATING PLANE 2X 2.6 0.2 3X 12.7 MIN 3X 3X 0.55 0.38 0.43 0.35 2X 1.27 0.13 FORMED LEAD OPTION STRAIGHT LEAD OPTION OTHER DIMENSIONS IDENTICAL TO STRAIGHT LEAD OPTION 3X 2.67 2.03 4.19 3.17 3 2 1 3.43 MIN 4215214/B 04/2017 NOTES: 1. All linear dimensions are in millimeters. Any dimensions in parenthesis are for reference only. Dimensioning and tolerancing per ASME Y14.5M. 2. This drawing is subject to change without notice. 3. Lead dimensions are not controlled within this area. 4. Reference JEDEC TO-226, variation AA. 5. Shipping method: a. Straight lead option available in bulk pack only. b. Formed lead option available in tape and reel or ammo pack. c. Specific products can be offered in limited combinations of shipping medium and lead options. d. Consult product folder for more information on available options. www.ti.com EXAMPLE BOARD LAYOUT LP0003A TO-92 - 5.34 mm max height TO-92 0.05 MAX ALL AROUND TYP FULL R TYP METAL TYP (1.07) 3X ( 0.85) HOLE 2X METAL (1.5) 2X (1.5) 2 1 (R0.05) TYP 3 2X (1.07) (1.27) SOLDER MASK OPENING 2X SOLDER MASK OPENING (2.54) LAND PATTERN EXAMPLE STRAIGHT LEAD OPTION NON-SOLDER MASK DEFINED SCALE:15X 0.05 MAX ALL AROUND TYP ( 1.4) 2X ( 1.4) METAL 3X ( 0.9) HOLE METAL (R0.05) TYP 2 1 (2.6) SOLDER MASK OPENING 3 2X SOLDER MASK OPENING (5.2) LAND PATTERN EXAMPLE FORMED LEAD OPTION NON-SOLDER MASK DEFINED SCALE:15X 4215214/B 04/2017 www.ti.com TAPE SPECIFICATIONS LP0003A TO-92 - 5.34 mm max height TO-92 13.7 11.7 32 23 (2.5) TYP 0.5 MIN 16.5 15.5 11.0 8.5 9.75 8.50 19.0 17.5 6.75 5.95 2.9 TYP 2.4 3.7-4.3 TYP 13.0 12.4 FOR FORMED LEAD OPTION PACKAGE 4215214/B 04/2017 www.ti.com IMPORTANT NOTICE Texas Instruments Incorporated (TI) reserves the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. TI's published terms of sale for semiconductor products (http://www.ti.com/sc/docs/stdterms.htm) apply to the sale of packaged integrated circuit products that TI has qualified and released to market. Additional terms may apply to the use or sale of other types of TI products and services. Reproduction of significant portions of TI information in TI data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such reproduced documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyers and others who are developing systems that incorporate TI products (collectively, "Designers") understand and agree that Designers remain responsible for using their independent analysis, evaluation and judgment in designing their applications and that Designers have full and exclusive responsibility to assure the safety of Designers' applications and compliance of their applications (and of all TI products used in or for Designers' applications) with all applicable regulations, laws and other applicable requirements. Designer represents that, with respect to their applications, Designer has all the necessary expertise to create and implement safeguards that (1) anticipate dangerous consequences of failures, (2) monitor failures and their consequences, and (3) lessen the likelihood of failures that might cause harm and take appropriate actions. Designer agrees that prior to using or distributing any applications that include TI products, Designer will thoroughly test such applications and the functionality of such TI products as used in such applications. TI's provision of technical, application or other design advice, quality characterization, reliability data or other services or information, including, but not limited to, reference designs and materials relating to evaluation modules, (collectively, "TI Resources") are intended to assist designers who are developing applications that incorporate TI products; by downloading, accessing or using TI Resources in any way, Designer (individually or, if Designer is acting on behalf of a company, Designer's company) agrees to use any particular TI Resource solely for this purpose and subject to the terms of this Notice. TI's provision of TI Resources does not expand or otherwise alter TI's applicable published warranties or warranty disclaimers for TI products, and no additional obligations or liabilities arise from TI providing such TI Resources. TI reserves the right to make corrections, enhancements, improvements and other changes to its TI Resources. TI has not conducted any testing other than that specifically described in the published documentation for a particular TI Resource. Designer is authorized to use, copy and modify any individual TI Resource only in connection with the development of applications that include the TI product(s) identified in such TI Resource. NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER TI INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT OF TI OR ANY THIRD PARTY IS GRANTED HEREIN, including but not limited to any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information regarding or referencing third-party products or services does not constitute a license to use such products or services, or a warranty or endorsement thereof. Use of TI Resources may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. TI RESOURCES ARE PROVIDED "AS IS" AND WITH ALL FAULTS. TI DISCLAIMS ALL OTHER WARRANTIES OR REPRESENTATIONS, EXPRESS OR IMPLIED, REGARDING RESOURCES OR USE THEREOF, INCLUDING BUT NOT LIMITED TO ACCURACY OR COMPLETENESS, TITLE, ANY EPIDEMIC FAILURE WARRANTY AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS. TI SHALL NOT BE LIABLE FOR AND SHALL NOT DEFEND OR INDEMNIFY DESIGNER AGAINST ANY CLAIM, INCLUDING BUT NOT LIMITED TO ANY INFRINGEMENT CLAIM THAT RELATES TO OR IS BASED ON ANY COMBINATION OF PRODUCTS EVEN IF DESCRIBED IN TI RESOURCES OR OTHERWISE. IN NO EVENT SHALL TI BE LIABLE FOR ANY ACTUAL, DIRECT, SPECIAL, COLLATERAL, INDIRECT, PUNITIVE, INCIDENTAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES IN CONNECTION WITH OR ARISING OUT OF TI RESOURCES OR USE THEREOF, AND REGARDLESS OF WHETHER TI HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Unless TI has explicitly designated an individual product as meeting the requirements of a particular industry standard (e.g., ISO/TS 16949 and ISO 26262), TI is not responsible for any failure to meet such industry standard requirements. Where TI specifically promotes products as facilitating functional safety or as compliant with industry functional safety standards, such products are intended to help enable customers to design and create their own applications that meet applicable functional safety standards and requirements. Using products in an application does not by itself establish any safety features in the application. Designers must ensure compliance with safety-related requirements and standards applicable to their applications. Designer may not use any TI products in life-critical medical equipment unless authorized officers of the parties have executed a special contract specifically governing such use. Life-critical medical equipment is medical equipment where failure of such equipment would cause serious bodily injury or death (e.g., life support, pacemakers, defibrillators, heart pumps, neurostimulators, and implantables). Such equipment includes, without limitation, all medical devices identified by the U.S. Food and Drug Administration as Class III devices and equivalent classifications outside the U.S. TI may expressly designate certain products as completing a particular qualification (e.g., Q100, Military Grade, or Enhanced Product). Designers agree that it has the necessary expertise to select the product with the appropriate qualification designation for their applications and that proper product selection is at Designers' own risk. Designers are solely responsible for compliance with all legal and regulatory requirements in connection with such selection. Designer will fully indemnify TI and its representatives against any damages, costs, losses, and/or liabilities arising out of Designer's noncompliance with the terms and provisions of this Notice. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2017, Texas Instruments Incorporated Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Texas Instruments: LM4040QCIM3-2.5/NOPB LM4040QBIM3-2.5/NOPB LM4040QEIM3X2.5/NOPB LM4040QCEM3-2.5/NOPB LM4040QAIM3X2.5/NOPB LM4040QEIM3-2.5/NOPB LM4040QDIM3-2.5/NOPB LM4040QAIM3-2.5/NOPB LM4040QDEM3-2.5/NOPB LM4040QBIM3X2.5/NOPB LM4040QCIM3X2.5/NOPB LM4040QDIM3X2.5/NOPB LM4040QEEM3-2.5/NOPB LM4040QCEM3-3.0/NOPB LM4040QDEM3-3.0/NOPB LM4040QEEM3-3.0/NOPB