High Frequency 5.0V HCMOS VCXO HV6x-xxxG - Series Description: 2111 Comprehensive Drive 2111 Comprehensive Drive Aurora, Illinois 60505 Aurora, Illinois 60505 Phone: 630- 851- 4722 Phone: 630- 851- 4722 Fax: 630- 851- 5040 Fax: 630- 851- 5040 www.conwin.com www.conwin.com US Headquarters: 630-851-4722 European Headquarters: +353-61-472221 Features: CW The Connor-Winfield HV6x-xxxG series are 14 pin DIP, 5.0V HCMOS, Voltage Controlled Crystal Oscillator (VCXO). Based on a fundamental crystal design the HV6x-xxxG series are designed for phase lock loop applications requiring low jitter and tight frequency stability. 1 HV64 049 38.88 -120 MHZ 5.0 Vdc Operation Available Frequency Stabilities: 20ppm, 25ppm, 50ppm or 100ppm Temperature Range: -40 to 85C Available Pull Ranges: 50ppm to 150 ppm HCMOS Output 14 Pin DIP Package RoHS Compliant / Lead Free Absolute Maximum Ratings Parameter Minimum Storage Temperature (TST) Supply Voltage (Vcc) Control Voltage (Vc) -55 -0.5 -0.5 Nominal - Maximum 125 7.0 Vcc + 0.5 Model Specifications Units C Vdc Vdc Notes Model NumberFrequency Stability (See ordering information on page 2.) HV61-xxxxG HV62-xxxxG HV63-xxxxG HV64-xxxxG Frequency Pullability Codes -25 -50 -100 -20 Minimum 100 50 120 60 150 75 200 (Not available above 70 MHz) 100 300 (Not available above 50 MHz) 150 - Nominal - 25 50 100 20 Maximum ppm ppm ppm ppm 1 1 1 1 ppm ppm ppm ppm ppm 2 2 2 2 2 Units Notes Units Notes Maximum Units Notes 10 - % Ohm KHz - Operating Specifications Parameter Minimum Nominal Maximum Center Frequency (Fo) 30 100 MHz Operating Temp Range (Ta) -40 85 C Supply Voltage (Vcc) 4.75 5.0 5.25 Vdc Supply Current (Icc) <50 MHz 35 mA >50 MHz 60 mA Jitter: Integrated Phase Jitter 1.0 ps RMS 3 Period Jitter (Jp) 5.0 ps RMS SSB Phase Noise @ 10 Hz offset -60 dBc/Hz @ 100 Hz offset -90 dBc/Hz @ 1 KHz offset -120 dBc/Hz @ 10 KHz offset -140 dBc/Hz @ 100 KHz offset -145 dBc/Hz Start-Up Time 10 ms Input Characteristics Parameter Minimum Control Voltage Range (Vc) 0.5 Center Frequency 2.0 Transfer Characteristic Linearity -10 Input Impedance Modulation Bandwidth (3dB) 15 Nominal 2.5 2.5 Positive 50K - 4.5 3.0 Vdc Vdc HCMOS Output Characteristics Parameter Bulletin Page Revision Date VX629 1 of 2 00 06 Dec 2010 Load Output Voltage High (Voh) Low (Vol) Duty Cycle Optional Duty Cycle Rise / Fall Times Minimum 4.5 40 45 - Nominal 15 50 50 - Maximum - - 0.5 60 55 3 Units Notes pF Vdc Vdc % % Add suffix "S" ns Specifications subject to change without notice. All dimensions in inches. (c) Copyright 2010 The Connor-Winfield Corporation 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www.conwin.com Ordering Information HV VCXO 5.0 Vdc HCMOS 14 Pin DIP Package 6 -120 4 Temperature Range 6= -40 to 85C Freq. Stability 1 = 25 ppm 2 = 50 ppm 3 = 100 ppm 4 = 20 ppm Pullability -100 = 50 ppm -120 = 60 ppm -150 = 75 ppm -200 = 100 ppm -300 = 150 ppm Duty Cycle Blank = 40/60% S = 45/55% G 038.88M RoHS Compliant Output Frequency - Frequency Format -xxx.xM Min. * -xxx.xxxxxxM Max.* * Amount of numbers after the decimal point. M = MHz Lead Free Example Part Number: HV64-120G-038.88M = VCXO 14 Pin DIP 5.0 Vdc, -40 to 85C, Freq. Stability 20 ppm, Freq Pullability 60 ppm, RoHS Compliant, Duty Cycle 40/60%, Output Frequency 38.88 MHz. Marking Diagram Package Characteristics Package Hermetically sealed 14 pin DIP package. CW Environmental Characteristics 1049 HV64-120 38.88 MHZ Pin Connections 1. 7. 8. 14. Vibration: Vibration per Mil Std 883E Method 2007.3 Test Condition A. Shock: Mechanical Shock per Mil Std 883E Method 2002.4 Test Condition B. Soldering Process; RoHS compliant lead free. See soldering profile on page 2. Solderability; Solderability per Mil Std 883E Method 2003. Control Voltage (Vc) Ground Output Supply Voltage (Vcc) Solder Profile Package Layout Temperature 260C 260C .310 7.87mm 220C 180C 150C 120C 0 Dimensional Tolerance: .005 (.127mm) .02 (.508mm) Time 120 S Max. 10 S 60 S Max. 360 Sec. Max. Output Waveform Test Circuit 90% 15pF 5.0V Control Voltage 50% 10% Notes: Bulletin 1. Frequency stability vs. temperature, referenced to the frequency measured at 25C with the control voltage at 2.5 Vdc. 2. Pull range is measured at 25C, referenced to Fo. 3. BW= 12 KHz to 20 MHz. Specifications subject to change without notice. All dimensions in inches. (c) Copyright 2010 The Connor-Winfield Corporation Page Revision Date VX629 2 of 2 00 06 Dec 2010