ABS1,4,5
36
ORDERING INFORMATION
HIGH ENVIRONMENTAL
RESISTANCE
TURQUOISE SWITCHES
ABS TYPE
VDE
6.4
19.3
11.1
http://panasonic-denko.co.jp/
ac/e/service/environment
FEATURES
• Subminiature size (19.8×11.1×6.4 mm)
• Sealed construction for use in adverse environment-Sealed construction by
epoxy resin and rubber cap greatly reduces possible miscontact due to
contaminants such as dust. Conforming to IP67* of IEC protective construction
classification
• Elastomer double molding technology, an industry first and ultrasonic swaging
technology contribute to uniform sealing in high production quantities
• Expansion of low-level circuit type
• We offer a Au clad 2-ply contact type (for small loads) that we developed
specifically for small current and voltage loads in the range of 1 mA to 100 mA
and 5 V to 30 V.
• UL/CSA/VDE/SEMKO approved
(AS for Au-clad twin layer, VDE and SEMKO are not approved.)
* Based on the protective construction classification of IEC, items which satisfy the test
requirements are denoted with an IP designation.
TYPICAL APPLICATIONS
• Automotive
• Home appliances (vacuum cleaner, air purifier)
• Others (gas cooking range)
Type of
switch
ABS:
Turquoise
switch
S type
Wire and
terminal
position
1:
4:
5:
Straight type
Right angle
Left angle
Terminal
1:
4:
5:
6:
.110 quick-connect
terminal
Solder terminal
PC board terminal
Wire leads
Contact
arrangement
1:
2:
3:
SPDT
SPST-NC
SPST-NO
Actuator
0:
1:
2:
3:
4:
6:
8:
Pin plunger
Short hinge lever
Hinge lever
Long hinge lever
Simulated roller
lever
Roller lever
Leaf lever
Operating
force by
pin plunger
(max.)
4:
5:
0.98 N
1.47 N
Contact*
0:
1:
4:
AgNi alloy
Au-clad
triple layer
Au-clad
double layer
Agency standard
3:
9:
UL/CSA/VDE/SEMKO
(AgNi alloy contact,
Au-clad triple layer type)
UL/CSA
(Au-clad double layer type)
Ex. ABS1 1 1 0 4 0 3
Remarks: 1. Standard packing: Dust protected type 100 pcs./carton, 1,000 pcs./case; Immersion protected type 50 pcs./case.
2. SPST-NC and SPST-NO are only available for wire leads type.
3. Leaf lever is only available for wire leads type
4. As for wire position:
5. Not every combination is available. Please refer to the following table, “PRODUCT TYPES”.
* Contact
Straight type Wire opposite to the
actuator side type
(Right angle)
Wire actuator side type
(Left angle)
AgNi alloy
0: AgNi alloy 1: Au-clad triple layer 4: Au-clad double layer
AgNi alloyAu-clad
CuNi alloy
Au-clad
CuNi alloy
SnapActionSwitch_neu.book Seite 36 Montag, 20. Oktober 2008 4:03 16
06/2009
ABS1,4,5
37
CONTACT ARRANGEMENT
PRODUCT TYPES
1. Dust protected type
AgNi alloy
Au-clad triple layer
Au-clad double layer
* Agency standard: Please refer to “Ordering information”.
Actuator Operating force
Max.
.110
quick-connect
terminal
Solder terminal
PC board terminal
Terminal position
Straight Right angle Left angle
Pin plunger 0.98 N ABS1110403 ABS1410403 ABS1510403 ABS4510403 ABS5510403
1.47 N ABS1110503 ABS1410503 ABS1510503 ABS4510503 ABS5510503
Short hinge lever 0.39 N ABS1111403 ABS1411403 ABS1511403 ABS4511403 ABS5511403
0.59 N ABS1111503 ABS1411503 ABS1511503 ABS4511503 ABS5511503
Hinge lever 0.34 N ABS1112403 ABS1412403 ABS1512403 ABS4512403 ABS5512403
0.54 N ABS1112503 ABS1412503 ABS1512503 ABS4512503 ABS5512503
Long hinge lever 0.25 N ABS1113403 ABS1413403 ABS1513403 ABS4513403 ABS5513403
0.44 N ABS1113503 ABS1413503 ABS1513503 ABS4513503 ABS5513503
Simulated roller lever 0.34 N ABS1114403 ABS1414403 ABS1514403 ABS4514403 ABS5514403
0.54 N ABS1114503 ABS1414503 ABS1514503 ABS4514503 ABS5514503
Roller lever 0.39 N ABS1116403 ABS1416403 ABS1516403 ABS4516403 ABS5516403
0.59 N ABS1116503 ABS1416503 ABS1516503 ABS4516503 ABS5516503
Actuator Operating force
Max.
.110
quick-connect
terminal
Solder terminal
PC board terminal
Terminal position
Straight Right angle Left angle
Pin plunger 0.98 N ABS1110413 ABS1410413 ABS1510413 ABS4510413 ABS5510413
1.47 N ABS1110513 ABS1410513 ABS1510513 ABS4510513 ABS5510513
Short hinge lever 0.39 N ABS1111413 ABS1411413 ABS1511413 ABS4511413 ABS5511413
0.59 N ABS1111513 ABS1411513 ABS1511513 ABS4511513 ABS5511513
Hinge lever 0.34 N ABS1112413 ABS1412413 ABS1512413 ABS4512413 ABS5512413
0.54 N ABS1112513 ABS1412513 ABS1512513 ABS4512513 ABS5512513
Long hinge lever 0.25 N ABS1113413 ABS1413413 ABS1513413 ABS4513413 ABS5513413
0.44 N ABS1113513 ABS1413513 ABS1513513 ABS4513513 ABS5513513
Simulated roller lever 0.34 N ABS1114413 ABS1414413 ABS1514413 ABS4514413 ABS5514413
0.54 N ABS1114513 ABS1414513 ABS1514513 ABS4514513 ABS5514513
Roller lever 0.39 N ABS1116413 ABS1416413 ABS1516413 ABS4516413 ABS5516413
0.59 N ABS1116513 ABS1416513 ABS1516513 ABS4516513 ABS5516513
Actuator Operating force
Max.
.110
quick-connect
terminal
Solder terminal
PC board terminal
Terminal position
Straight Right angle Left angle
Pin plunger 0.98 N ABS1110449 ABS1410449 ABS1510449 ABS4510449 ABS5510449
1.47 N ABS1110549 ABS1410549 ABS1510549 ABS4510549 ABS5510549
Short hinge lever 0.39 N ABS1111449 ABS1411449 ABS1511449 ABS4511449 ABS5511449
0.59 N ABS1111549 ABS1411549 ABS1511549 ABS4511549 ABS5511549
Hinge lever 0.34 N ABS1112449 ABS1412449 ABS1512449 ABS4512449 ABS5512449
0.54 N ABS1112549 ABS1412549 ABS1512549 ABS4512549 ABS5512549
Long hinge lever 0.25 N ABS1113449 ABS1413449 ABS1513449 ABS4513449 ABS5513449
0.44 N ABS1113549 ABS1413549 ABS1513549 ABS4513549 ABS5513549
Simulated roller lever 0.34 N ABS1114449 ABS1414449 ABS1514449 ABS4514449 ABS5514449
0.54 N ABS1114549 ABS1414549 ABS1514549 ABS4514549 ABS5514549
Roller lever 0.39 N ABS1116449 ABS1416449 ABS1516449 ABS4516449 ABS5516449
0.59 N ABS1116549 ABS1416549 ABS1516549 ABS4516549 ABS5516549
1. SPDT 2. SPST-NC (Wire leads type only) 3. SPST-NO (Wire leads type only)
COM NO NC COM NC COM NO
SnapActionSwitch_neu.book Seite 37 Montag, 20. Oktober 2008 4:03 16
06/2009
ABS1,4,5
38
2. Immersion protected type (3 wire leads type SPDT)
AgNi alloy
Au-clad triple layer
Au-clad double layer
* Agency standard: Please refer to “Ordering information”.
Actuator Operating force
Max.
SPDT
Wire position
Straight Right angle Left angle
Pin plunger 0.98 N ABS1610403 ABS4610403 ABS5610403
1.47 N ABS1610503 ABS4610503 ABS5610503
Short hinge lever 0.39 N ABS1611403 ABS4611403 ABS5611403
0.59 N ABS1611503 ABS4611503 ABS5611503
Hinge lever 0.34 N ABS1612403 ABS4612403 ABS5612403
0.54 N ABS1612503 ABS4612503 ABS5612503
Long hinge lever 0.25 N ABS1613403 ABS4613403 ABS5613403
0.44 N ABS1613503 ABS4613503 ABS5613503
Simulated roller lever 0.34 N ABS1614403 ABS4614403 ABS5614403
0.54 N ABS1614503 ABS4614503 ABS5614503
Roller lever 0.39 N ABS1616403 ABS4616403 ABS5616403
0.59 N ABS1616503 ABS4616503 ABS5616503
Actuator Operating force
Max.
SPDT
Wire position
Straight Right angle Left angle
Pin plunger 0.98 N ABS1610413 ABS4610413 ABS5610413
1.47 N ABS1610513 ABS4610513 ABS5610513
Short hinge lever 0.39 N ABS1611413 ABS4611413 ABS5611413
0.59 N ABS1611513 ABS4611513 ABS5611513
Hinge lever 0.34 N ABS1612413 ABS4612413 ABS5612413
0.54 N ABS1612513 ABS4612513 ABS5612513
Long hinge lever 0.25 N ABS1613413 ABS4613413 ABS5613413
0.44 N ABS1613513 ABS4613513 ABS5613513
Simulated roller lever 0.34 N ABS1614413 ABS4614413 ABS5614413
0.54 N ABS1614513 ABS4614513 ABS5614513
Roller lever 0.39 N ABS1616413 ABS4616413 ABS5616413
0.59 N ABS1616513 ABS4616513 ABS5616513
Actuator Operating force
Max.
SPDT
Wire position
Straight Right angle Left angle
Pin plunger 0.98 N ABS1610449 ABS4610449 ABS5610449
1.47 N ABS1610549 ABS4610549 ABS5610549
Short hinge lever 0.39 N ABS1611449 ABS4611449 ABS5611449
0.59 N ABS1611549 ABS4611549 ABS5611549
Hinge lever 0.34 N ABS1612449 ABS4612449 ABS5612449
0.54 N ABS1612549 ABS4612549 ABS5612549
Long hinge lever 0.25 N ABS1613449 ABS4613449 ABS5613449
0.44 N ABS1613549 ABS4613549 ABS5613549
Simulated roller lever 0.34 N ABS1614449 ABS4614449 ABS5614449
0.54 N ABS1614549 ABS4614549 ABS5614549
Roller lever 0.39 N ABS1616449 ABS4616449 ABS5616449
0.59 N ABS1616549 ABS4616549 ABS5616549
SnapActionSwitch_neu.book Seite 38 Montag, 20. Oktober 2008 4:03 16
06/2009
ABS1,4,5
39
3. Immersion protected type (2 wire leads type SPST-NC)
AgNi alloy
Au-clad triple layer
Au-clad double layer
* Agency standard: Please refer to “Ordering information”.
Actuator Operating force
Max.
SPST-NC
Wire position
Straight Right angle Left angle
Pin plunger 0.98 N ABS1620403 ABS4620403 ABS5620403
1.47 N ABS1620503 ABS4620503 ABS5620503
Short hinge lever 0.39 N ABS1621403 ABS4621403 ABS5621403
0.59 N ABS1621503 ABS4621503 ABS5621503
Hinge lever 0.34 N ABS1622403 ABS4622403 ABS5622403
0.54 N ABS1622503 ABS4622503 ABS5622503
Long hinge lever 0.25 N ABS1623403 ABS4623403 ABS5623403
0.44 N ABS1623503 ABS4623503 ABS5623503
Simulated roller lever 0.34 N ABS1624403 ABS4624403 ABS5624403
0.54 N ABS1624503 ABS4624503 ABS5624503
Roller lever 0.39 N ABS1626403 ABS4626403 ABS5626403
0.59 N ABS1626503 ABS4626503 ABS5626503
Actuator Operating force
Max.
SPST-NC
Wire position
Straight Right angle Left angle
Pin plunger 0.98 N ABS1620413 ABS4620413 ABS5620413
1.47 N ABS1620513 ABS4620513 ABS5620513
Short hinge lever 0.39 N ABS1621413 ABS4621413 ABS5621413
0.59 N ABS1621513 ABS4621513 ABS5621513
Hinge lever 0.34 N ABS1622413 ABS4622413 ABS5622413
0.54 N ABS1622513 ABS4622513 ABS5622513
Long hinge lever 0.25 N ABS1623413 ABS4623413 ABS5623413
0.44 N ABS1623513 ABS4623513 ABS5623513
Simulated roller lever 0.34 N ABS1624413 ABS4624413 ABS5624413
0.54 N ABS1624513 ABS4624513 ABS5624513
Roller lever 0.39 N ABS1626413 ABS4626413 ABS5626413
0.59 N ABS1626513 ABS4626513 ABS5626513
Actuator Operating force
Max.
SPST-NC
Wire position
Straight Right angle Left angle
Pin plunger 0.98 N ABS1620449 ABS4620449 ABS5620449
1.47 N ABS1620549 ABS4620549 ABS5620549
Short hinge lever 0.39 N ABS1621449 ABS4621449 ABS5621449
0.59 N ABS1621549 ABS4621549 ABS5621549
Hinge lever 0.34 N ABS1622449 ABS4622449 ABS5622449
0.54 N ABS1622549 ABS4622549 ABS5622549
Long hinge lever 0.25 N ABS1623449 ABS4623449 ABS5623449
0.44 N ABS1623549 ABS4623549 ABS5623549
Simulated roller lever 0.34 N ABS1624449 ABS4624449 ABS5624449
0.54 N ABS1624549 ABS4624549 ABS5624549
Roller lever 0.39 N ABS1626449 ABS4626449 ABS5626449
0.59 N ABS1626549 ABS4626549 ABS5626549
SnapActionSwitch_neu.book Seite 39 Montag, 20. Oktober 2008 4:03 16
06/2009
ABS1,4,5
40
4. Immersion protected type (2 wire leads type SPST-NO)
AgNi alloy
Au-clad triple layer
Au-clad double layer
* Agency standard: Please refer to “Ordering information”.
Actuator Operating force
Max.
SPST-NO
Wire position
Straight Right angle Left angle
Pin plunger 0.98 N ABS1630403 ABS4630403 ABS5630403
1.47 N ABS1630503 ABS4630503 ABS5630503
Short hinge lever 0.39 N ABS1631403 ABS4631403 ABS5631403
0.59 N ABS1631503 ABS4631503 ABS5631503
Hinge lever 0.34 N ABS1632403 ABS4632403 ABS5632403
0.54 N ABS1632503 ABS4632503 ABS5632503
Long hinge lever 0.25 N ABS1633403 ABS4633403 ABS5633403
0.44 N ABS1633503 ABS4633503 ABS5633503
Simulated roller lever 0.34 N ABS1634403 ABS4634403 ABS5634403
0.54 N ABS1634503 ABS4634503 ABS5634503
Roller lever 0.39 N ABS1636403 ABS4636403 ABS5636403
0.59 N ABS1636503 ABS4636503 ABS5636503
Actuator Operating force
Max.
SPST-NO
Wire position
Straight Right angle Left angle
Pin plunger 0.98 N ABS1630413 ABS4630413 ABS5630413
1.47 N ABS1630513 ABS4630513 ABS5630513
Short hinge lever 0.39 N ABS1631413 ABS4631413 ABS5631413
0.59 N ABS1631513 ABS4631513 ABS5631513
Hinge lever 0.34 N ABS1632413 ABS4632413 ABS5632413
0.54 N ABS1632513 ABS4632513 ABS5632513
Long hinge lever 0.25 N ABS1633413 ABS4633413 ABS5633413
0.44 N ABS1633513 ABS4633513 ABS5633513
Simulated roller lever 0.34 N ABS1634413 ABS4634413 ABS5634413
0.54 N ABS1634513 ABS4634513 ABS5634513
Roller lever 0.39 N ABS1636413 ABS4636413 ABS5636413
0.59 N ABS1636513 ABS4636513 ABS5636513
Actuator Operating force
Max.
SPST-NO
Wire position
Straight Right angle Left angle
Pin plunger 0.98 N ABS1630449 ABS4630449 ABS5630449
1.47 N ABS1630549 ABS4630549 ABS5630549
Short hinge lever 0.39 N ABS1631449 ABS4631449 ABS5631449
0.59 N ABS1631549 ABS4631549 ABS5631549
Hinge lever 0.34 N ABS1632449 ABS4632449 ABS5632449
0.54 N ABS1632549 ABS4632549 ABS5632549
Long hinge lever 0.25 N ABS1633449 ABS4633449 ABS5633449
0.44 N ABS1633549 ABS4633549 ABS5633549
Simulated roller lever 0.34 N ABS1634449 ABS4634449 ABS5634449
0.54 N ABS1634549 ABS4634549 ABS5634549
Roller lever 0.39 N ABS1636449 ABS4636449 ABS5636449
0.59 N ABS1636549 ABS4636549 ABS5636549
SnapActionSwitch_neu.book Seite 40 Montag, 20. Oktober 2008 4:03 16
06/2009
ABS1,4,5
41
5. Immersion protected type (3 wire leads type SPDT)
• Leaf lever type
AgNi alloy
Au-clad triple layer
Au-clad double layer
6. Immersion protected type (2 wire leads type SPST-NC)
• Leaf lever type
AgNi alloy
Au-clad triple layer
Au-clad double layer
7. Immersion protected type (2 wire leads type SPST-NO)
• Leaf lever type
AgNi alloy
Au-clad triple layer
* Agency standard: Please refer to “Ordering information”.
Actuator Operating force
Max.
SPDT
Wire position
Straight Right angle Left angle
Leaf lever 0.88 N ABS1618403 ABS4618403 ABS5618403
1.08 N ABS1618503 ABS4618503 ABS5618503
Actuator Operating force
Max.
SPDT
Wire position
Straight Right angle Left angle
Leaf lever 0.88 N ABS1618413 ABS4618413 ABS5618413
1.08 N ABS1618513 ABS4618513 ABS5618513
Actuator Operating force
Max.
SPDT
Wire position
Straight Right angle Left angle
Leaf lever 0.88 N ABS1618449 ABS4618449 ABS5618449
1.08 N ABS1618549 ABS4618549 ABS5618549
Actuator Operating force
Max.
SPST-NC
Wire position
Straight Right angle Left angle
Leaf lever 0.88 N ABS1628403 ABS4628403 ABS5628403
1.08 N ABS1628503 ABS4628503 ABS5628503
Actuator Operating force
Max.
SPST-NC
Wire position
Straight Right angle Left angle
Leaf lever 0.88 N ABS1628413 ABS4628413 ABS5628413
1.08 N ABS1628513 ABS4628513 ABS5628513
Actuator Operating force
Max.
SPST-NC
Wire position
Straight Right angle Left angle
Leaf lever 0.88 N ABS1628449 ABS4628449 ABS5628449
1.08 N ABS1628549 ABS4628549 ABS5628549
Actuator Operating force
Max.
SPST-NO
Wire position
Straight Right angle Left angle
Leaf lever 0.88 N ABS1638403 ABS4638403 ABS5638403
1.08 N ABS1638503 ABS4638503 ABS5638503
Actuator Operating force
Max.
SPST-NO
Wire position
Straight Right angle Left angle
Leaf lever 0.88 N ABS1638413 ABS4638413 ABS5638413
1.08 N ABS1638513 ABS4638513 ABS5638513
SnapActionSwitch_neu.book Seite 41 Montag, 20. Oktober 2008 4:03 16
06/2009
ABS1,4,5
42
Au-clad double layer
* Agency standard: Please refer to “Ordering information”.
SPECIFICATIONS
2. Characteristics
3. Operating characteristics
Actuator Operating force
Max. gf
SPST-NO
Wire position
Straight Right angle Left angle
Leaf lever 0.89 N ABS1638449 ABS4638449 ABS5638449
1.08 N ABS1638549 ABS4638549 ABS5638549
Mechanical life
(O.T.: Specified value)
Leaf lever Min. 5x105 (at 60 cpm)
Other types Min. 5x106 (at 60 cpm)
Electrical life at rated load
(O.T.: Max.)
AgNi alloy contact type Min. 5x104 (at 20 cpm)
Au-clad contact type Min. 2x105 (at 20 cpm)
Insulation resistance Min. 100 MΩ (at 500 V DC insulation resistance meter)
Dielectric strength
Between non-continuous terminals
Between each terminal and other exposed metal parts
Between each terminal and ground
1,000 Vrms
1,500 Vrms
1,500 Vrms
Vibration resistance (Pin plunger type) 10 to 55 Hz at single amplitude of 0.75 mm (Contact opening Max. 1 msec.)
Shock resistance (Pin plunger type) Min. 294 m/s2 (Contact opening Max. 1 msec.)
Contact resistance (Initial)
AgNi alloy contact type Dust protected type (IP50): Max. 50 mΩ
Immersion protected type (IP67): Max. 100 mΩ (By voltage drop 1 A 6 to 8 V DC)
Au-clad contact type Dust protected type (IP50): Max. 100 mΩ
Immersion protected type (IP67): Max. 150 mΩ (By voltage drop 0.1 A 6 to 8 V DC)
Allowable operating speed (at no load) 0.1 to 500 mm/sec.
Max. operating cycle rate (at no load) 120 cpm
Ambient temperature –40°C to +85°C
Unit weight Approx. 2 g (IP50 type)
Type of actuator Operating force, Max. Release force, Min. Pretravel, Max.
mm
Movement
differential,
Max. mm
Overtravel,
Min. mm
Operating
position,
mm
Pin plunger 0.98N 1.47N 0.15N 0.20N 0.6 0.1 0.4 8.4±0.3
Short hinge lever 0.39N 0.59N 0.034N 0.039N 2.5 0.5 0.8 8.8±0.8
Hinge lever 0.34N 0.54N 0.029N 0.034N 2.8 0.8 1.2 8.8±0.8
Long hinge lever 0.25N 0.44N 0.025N 0.029N 3.5 1.0 1.6 8.8±1.2
Simulated roller lever 0.34N 0.54N 0.029N 0.034N 2.8 0.8 1.2 11.65±0.8
Roller lever 0.39N 0.59N 0.034N 0.039N 2.5 0.5 0.8 14.5±0.8
Leaf lever 0.88N 1.08N 0.17N 0.20N 4.5 1.0 2.5 14.5±1.5
1. Contact rating
Low-level circuit rating (Au-clad contact type)
Voltage AgNi alloy contact type
Au-clad contact type
Au-clad
triple layer
Au-clad
twin layer
Resistive load Inductive load Resistive load
125 V AC 2 A 2 A 0.1 A —
250 V AC 2 A 2 A 0.1 A —
30 V DC 2 A 2 A 0.1 A 0.1 A
125 V DC 0.4 A 0.05 A — —
Rated voltage Resistive load
6 V DC 5 mA
12 V DC 2 mA
24 V DC 1 mA
Recommended contact material chart
classified by load voltage & current
(reference)
Remarks: If the contact is being used in the constant
low-level circuit load range, the Au-clad twin
layer contact is recommended. If there is a
danger of the current being less than 0.5 A,
for instance if the contact is being turned on
and off, the Au-clad triple layer type is
recommended.
Silver-alloy
Gold-clad double layer
2A
100mA
1mA
0DC
AC 5
515 30V
30 250V
Gold-clad triple layer
SnapActionSwitch_neu.book Seite 42 Montag, 20. Oktober 2008 4:03 16
06/2009
ABS1,4,5
43
DIMENSIONS mm General tolerance: ±0.25
1. Dust protected type
1-(1) .110 quick-connect terminal
Pin plunger
7.6±0.3
3.4±0.1
11
7.1±0.15
5.5±0.1
1.2±0.05 dia.
2.4
7.7
+0.1
−0.05
2.4
2.5±0.1
19.8±0.3
7.6±0.15 7.6±0.15
9.5±0.1 4
2.8±0.1 C0.6
Position
Operating
8.4±0.3
11.8±0.4
6.7
Pretravel 0.6 max.
6.4±0.2
1.7 dia.
−0.05
+0.1
2.4 dia.
Pretravel, Max. mm 0.6
Movement differential,
Max. mm 0.1
Overtravel, Min. mm 0.4
Operating
position
Distance from
mounting hole,
mm
8.4±0.3
Distance from
stand-off,
mm
11.8±0.4
Short hinge lever
5±0.4
R18 Pretravel 2.5 max.
12.85
6.3
4
(3.7)
Position
8.8±0.8
Operating
12.2±0.9
Pretravel, Max. mm 2.5
Movement differential,
Max. mm 0.5
Overtravel, Min. mm 0.8
Operating
position
Distance from
mounting hole,
mm
8.8±0.8
Distance from
stand-off,
mm
12.2±0.9
Hinge lever
4
(3.7)
8.8±0.8
12.2±0.9
7.15±0.4
R20.2
Operating
Pretravel 2.8 max.
Position
Pretravel, Max. mm 2.8
Movement differential,
Max. mm 0.8
Overtravel, Min. mm 1.2
Operating
position
Distance from
mounting hole,
mm
8.8±0.8
Distance from
stand-off,
mm
12.2±0.9
Long hinge lever
4
(3.5)
Position
Operating
8.8±1.2
R26.1 Pretravel 3.5 max.
13.1±0.4
12.2±1.3
Pretravel, Max. mm 3.5
Movement differential,
Max. mm 1
Overtravel, Min. mm 1.6
Operating
position
Distance from
mounting hole,
mm
8.8±1.2
Distance from
stand-off,
mm
12.2±1.3
SnapActionSwitch_neu.book Seite 43 Montag, 20. Oktober 2008 4:03 16
06/2009
ABS1,4,5
44
Simulated roller lever mm General tolerance: ±0.25
Pretravel 2.8 max.
11.65±0.8
Operating
Position
15.05±0.9
R2.5
R19.9
4
(3.5)
6.3±0.4
Pretravel, Max. mm 2.8
Movement differential,
Max. mm 0.8
Overtravel, Min. mm 1.2
Operating
position
Distance from
mounting hole,
mm
11.65±0.8
Distance from
stand-off,
mm
15.05±0.9
Roller lever
3.2
5 dia.
Pretravel 2.5 max.
5.15±0.4
17.9±0.9
Operating
Position
14.5±0.8
R18.9
Pretravel, Max. mm 2.5
Movement differential,
Max. mm 0.5
Overtravel, Min. mm 0.8
Operating
position
Distance from
mounting hole,
mm
14.5±0.8
Distance from
stand-off,
mm
17.9±0.9
1-(2) Solder terminal
3.4±0.15
2.5±0.1
9.5±0.1
8.7±0.15
15.4±0.15
2.8±0.2
19.8±0.3
-0.05
+0.1
2.4 dia.
+0.1
-0.05
2.4
2.4
2.4
1.9
7.4
1.1±0.12
1.5±0.12
0.5
1.85±0.2
1.25±0.1
5.2
6.4±0.2
Remarks: Dimensions of the actuator types are
the same as those of corresponding
.110 quick-connect terminal types.
1-(3) PC board terminal
Straight type
1.1±0.12
1.5±0.12
0.5
1.85±0.2
1.25±0.1
5.2
6.4±0.2
8.7±0.15
2.5±0.1
15.4±0.15
19.8±0.3
9.5±0.1 2.2
dia.
+0.1
-0.05
2.4
3.4±0.15
+0.1
2.4
7.4
2.4
-0.05
0.9
8.7±0.1
15.4±0.1
1.2±0.05 dia.
Remarks: Dimensions of the actuator types are
the same as those of corresponding
.110 quick-connect terminal types.
SnapActionSwitch_neu.book Seite 44 Montag, 20. Oktober 2008 4:03 16
06/2009
ABS1,4,5
45
Right angle type mm General tolerance: ±0.25
7.62±0.15 7.62±0.15 0.5
5.08±0.2
6.4
7.62±0.1
3-1.5±0.05 dia.
7.62±0.1
Remarks: Dimensions of the actuator types are
the same as those of corresponding
.110 quick-connect terminal types.
Left angle type
5.08±0.2
0.5 6.4
7.62±0.15 7.62±0.15 1.3
7.62±0.15 7.62±0.15
(2.8)
1.3
3.2
6.4
6-C0.3
7.62±0.1
3-1.5±0.05 dia.
7.62±0.1
Remarks: Dimensions of the actuator types are
the same as those of corresponding
.110 quick-connect terminal types.
2. Immersion protected type
Wire leads
Pin plunger
Straight type
COM NO NC
21.2
9.2
300±10
5±2
dia.
-0.05
+0.1
2.4
6.4
Thickness of the lead wire: 0.5 mm2
UL/CSA approved type and Right/Left angle type:
AWG #20
Color of the lead wire:
COM...Black
N.C. ...Red
N.O. ...White
Remarks: 1. Other dimensions are the same as those of
.110 quick-connect terminal types.
2. Dimensions of the actuator types are the
same as those of corresponding .110 quick-
connect terminal types.
Right angle type Left angle type
5±2
300±10
5±2
300±10
SnapActionSwitch_neu.book Seite 45 Montag, 20. Oktober 2008 4:03 16
06/2009
ABS1,4,5
46
Leaf lever mm General tolerance: ±0.25
Straight type
Pretravel 4.5 max.
1.5
Free Position
(16.5)
14.5±1.5
Operating Position
Totaltravel Position
(10.5 min.)
7.6±0.3 8±1
23.8±0.4
5±2
300±10
2.4 dia.
-0.05
+0.1
5
6.4
7.7
8.4 8.4
2.5±0.1
Thickness of the lead wire: 0.5 mm2
UL/CSA approved type and Right/Left angle type:
AWG #20
Color of the lead wire:
COM...Black
N.C. ...Red
N.O. ...White
Right angle type Left angle type
5
6.4
300±10
5±2
5
6.4
300±10
5±2
SnapActionSwitch_neu.book Seite 46 Montag, 20. Oktober 2008 4:03 16
06/2009
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Panasonic:
ABS1110419 ABS1111409 ABS1111419 ABS1111519 ABS1112319 ABS1112409 ABS1113419 ABS1114409
ABS1114419 ABS1116409 ABS1116419 ABS1116509 ABS1116519 ABS1410419 ABS1411409 ABS1413409
ABS1413419 ABS1413509 ABS1416409 ABS1416519 ABS1510419 ABS1511409 ABS1511419 ABS1513419
ABS1513509 ABS1514419 ABS1516409 ABS1516509 ABS1516519 ABS161040 ABS1611419 ABS1611509
ABS1611519 ABS1612409 ABS161250 ABS1612519 ABS161340 ABS1613519 ABS1614319 ABS1614519
ABS161840 ABS162250 ABS1630509 ABS1636419 ABS1636509 ABS451050 ABS451234 ABS451434
ABS4616319 ABS551051 ABS5510519 ABS551234 ABS551434 ABS561651 ABS5616549 ABS561840
ABS5618403 ABS5633419 ABS5634503 ABS1412513 ABS1631409 ABS1634549 ABS1638549 ABS4634549
ABS5634549
