The ABC75 Series of open frame power supplies feature a wide universal AC input range of 85 V - 264 VAC, offering 75 W of output power in a compact 3 x 2 x 1 inch footprint, with a variety of isolated single output voltages. The high efficiency and high power density of the ABC family ensures minimal power loss in end-use equipment, thereby facilitating higher reliability, easier thermal management and meets regulatory approvals for environmentally-friendly end products. ABC Series power supplies are ideal for telecom, datacom, industrial equipment and other applications. * 3 x 2 x 1 Inch Form Factor * 75 Watts with Convection Cooling * Efficiency up to 93% * -40 to 70C Operating Temperature * Thermal Shut-Down Feature * 2 Million Hours, Telcordia -SR332-Issue 3 * Standby Power < 0.3 W * RoHS Compliant * CE Marked * Instrumentation * Renewable Energy * Lighting * Test and Measurement * Industrial Applications * Robotics * Applied Computing * Wireless Communication ABC75 Series 2 ABC75-1T12L ABC75-1012L Screw Terminal Molex Header 12 V 6.25 A 0.0 A 1% ABC75-1T15L ABC75-1015L Screw Terminal Molex Header 15 V 5.00 A 0.0 A 1% ABC75-1T24L ABC75-1024L Screw Terminal Molex Header 24 V 3.12 A 0.0 A 1% ABC75-1T30L ABC75-1030L Screw Terminal Molex Header 30 V 2.50 A 0.0 A 1% ABC75-1T48L ABC75-1048L Screw Terminal Molex Header 48 V 1.56 A 0.0 A 1% ABC75-1T58L ABC75-1058L Screw Terminal Molex Header 58 V 1.29 A 0.0 A 1% COVER-120-XBC2 metal cover kit accessory Specifications are for nominal input voltage, 25C unless otherwise stated. Input Voltage Universal (Derate from 75 W @ 100 VAC to 65 W @ 85 VAC) Input Frequency 85-264 VAC / 390 VDC3 47-63 Hz Input Current 115 VAC: 230 VAC: 1 A max. 0.5 A max. No Load Power Typical < 0.3 W Inrush Current 115 VAC: 230 VAC: 264 VAC: 25 A 45 A 75 A Power Factor @ Full Load > 0.95 Switching Frequency Typical 60 kHz 1 Ripple is peak to peak with 20 MHz bandwidth and 10 F (Tantalum capacitor) in parallel with a 0.1 F capacitor at rated line voltage and load ranges. 2 When used in Cover Kit, de-rate output power to 70 % under all operating conditions 3 Functional, not approved. tech.support@psbel.com ABC75 Series 3 Output Power Convection cooled 75 W Efficiency 48 V, 58 V: 24 V, 30 V: 12 V, 15 V: 93% 91% 90% Hold-up Time Typical >16 ms Line Regulation +/-0.5% Load Regulation Transient Response +/-1% 25% step load change, at 0.1A/uS slew rate, 50% duty cycle, 50 Hz = 4% recovery time < 5 ms Voltage Adjustment Rise Time +/-3% Typical 55 ms Set Point Tolerance +/-1% Over Current Protection > 110% Over Voltage Protection Latch type (AC recycling required) Short Circuit Protection Hiccup mode 110 to 140% Conducted Emissions EN55032-B, CISPR22-B, FCC PART15-B Pass Radiated Emissions EN 55032 A; with external core (King core K5B RC 25x12x15-M in input cable) Pass Level B Input Current Harmonics EN 61000-3-2 Class D Voltage Fluctuation and Flicker EN 61000-3-3 Pass ESD Immunity EN 61000-4-2 Level 3, Criterion A Radiated Field Immunity EN 61000-4-3 Level 3, Criterion A Electrical Fast Transient Immunity EN 61000-4-4 Level 3, Criterion A Surge Immunity EN 61000-4-5 Level 3, Criterion A Conducted Immunity EN 61000-4-6 Level 3, Criterion A Magnetic Field Immunity EN 61000-4-8 Level 3, Criterion A Voltage Dips, Interruptions EN 61000-4-11 Criterion A & B Isolation Voltage Safety Standard(s) Input to Output: (For ITE application) Input to GND: Approved to the latest edition of the following standards: CSA/UL60950-1, EN60950-1 and IEC60950-1. Agency Approvals Nemko, UL, C-UL, CCC CE mark Complies with LVD Directive 3000 VAC 1500 VAC Europe, Middle East +353 61 225 977 North America +1 408 785 5200 (c) 2018 Bel Power Solutions & Protection BCD.00664_AD Asia-Pacific +86 755 298 85888 ABC75 Series 4 Operating Temperature4 Startup guaranteed with spec deviation, see Fig 1. Storage Temperature -40 to +70C -40 to 0C -40 to +85C Cooling With natural convection cooling at 100 to 264 VAC 75 W Relative Humidity Noncondensing 5% to 95% Altitude Operating: Nonoperating: 16,000 ft 40,000 ft. Reliability MTBF according to Telcordia -SR332-Issue 3 2.00 million hours De-rate linearly from 100% at 50C to 50% at 70C Figure 1. Derating Curve AC Input Connector DC Output Connector J1 J2 Pin 1 Pin 2 Pin 3 AC Line Not Fitted AC Neutral Pin 1, 2 Pin 3, 4 V1 -VE V1 +VE Screw Terminal (Option 1) Molex Header (Option 2) Screw Terminal (Option 1) Molex Header (Option 2) Weight 150 g Dimensions 76.2 x 50.8 x 25.4 mm (3 x 2 x 1 inch) Cooling 75 W with natural convection cooling at 100 to 264 VAC 4 Molex: 39357-0003 Tyco-2-1776112-3 Molex: 1722861103 (Mating conn: Molex 1722561003) Molex: 39357-0004 Tyco-2-1776112-4 Molex: 1722861104 (Mating conn: Molex 1722561004) Output ripple can be more than 10% of the output voltage. tech.support@psbel.com ABC75 Series 5 Figure 2. Mechanical Drawing - Screw Terminal (Option 1) Figure 3 - Mechanical Drawing - Molex Header (Option 2) NOTES: In case the PCB is mounted in a metal enclosure, using metal hardware ensure the following: 1 Stand off, used to mount PCB has OD of 5.4 mm max. 2 Screws, used to fix PCB on stand off, have head dia of 6.0 mm max. 3 Washer, if used, to have dia of 6.5 mm max. NUCLEAR AND MEDICAL APPLICATIONS - Products are not designed or intended for use as critical components in life support systems, equipment used in hazardous environments, or nuclear control systems. TECHNICAL REVISIONS - The appearance of products, including safety agency certifications pictured on labels, may change depending on the date manufactured. Specifications are subject to change without notice. Europe, Middle East +353 61 225 977 North America +1 408 785 5200 (c) 2018 Bel Power Solutions & Protection BCD.00664_AD Asia-Pacific +86 755 298 85888