Order this document by MJE18206/D SEMICONDUCTOR TECHNICAL DATA $#!% #)% %"& &'#% #% !'%#" ' !!&' " ) ' " #)% ($$!* $$! ' #"& POWER TRANSISTORS 8 AMPERES 1200 VOLTS 40 and 100 WATTS The MJE/MJF18206 have an application specific state-of-the-art die dedicated to the electronic ballast ("light ballast") and power supply applications. * Improved Global Efficiency Due to Low Base Drive Requirements: -- High and Flat DC Current Gain hFE -- Fast Switching -- No Coil Required in Base Circuit for fast Turn-Off (No Current Tail) * Full Characterization at 125_C * Motorola "6 SIGMA" Philosophy Provides Tight and Reproducible Parametric Distributions * Two Package Choices: Standard TO-220 or Isolated TO-220 IIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIII IIII IIII IIII III IIIIIIIIIIIIIIIIIIIIIIII IIII IIII IIIIIIIIIIIII IIII IIIIIII III IIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIII IIIIIIIIIIIIIIIIIIIII IIII III IIIIIII IIIIIIIIIIIIIIIIIIIII IIII III IIIIIII IIIIIIIIIIIIIIIIIIIII IIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIII IIIIIII IIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIII IIII IIII IIII III IIIIIII IIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIII IIII IIII IIII III IIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIII IIIIIIIIIIIIIII IIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIII IIIIIIIIIIIIII v IIIIIIIIIIIIIIIIIIIIIIIIIII MAXIMUM RATINGS Rating Symbol MJE18206 MJF18206 Unit Collector-Emitter Voltage VCEO 600 Vdc Collector-Base Voltage VCBO 1200 Vdc Collector-Emitter Voltage VCES 1200 Vdc Emitter-Base Voltage VEBO 10 Vdc Collector Current -- Continuous -- Peak (1) IC ICM 8 16 Adc Base Current -- Continuous -- Peak (1) IB IBM 5 9 Adc RMS Isolation Voltage (2) (for 1 sec, R.H. 30%) TC = 25C Per Figure 22 Per Figure 23 Per Figure 24 *Total Device Dissipation @ TC = 25C *Derate above 25_C Operating and Storage Temperature VISOL1 VISOL2 VISOL3 PD TJ, Tstg 100 0.8 4500 3500 1500 Volts 40 0.32 Watt W/_C - 65 to 150 CASE 221A-06 TO-220AB _C THERMAL CHARACTERISTICS Rating Symbol MJE18206 MJF18206 Unit Thermal Resistance -- Junction to Case -- Junction to Ambient RJC RJA 1.25 62.5 3.125 62.5 _C/W Maximum Lead Temperature for Soldering Purposes: 1/8 from Case for 5 Seconds TL 260 _C CASE 221D-02 TO-220 FULLPACK (1) Pulse Test: Pulse Width = 5 ms, Duty Cycle 10%. (2) Proper strike and creepage distance must be provided. Designer's Data for "Worst Case" Conditions -- The Designer's Data Sheet permits the design of most circuits entirely from the information presented. SOA Limit curves -- representing boundaries on device characteristics -- are given to facilitate "worst case" design. Designer's and SWITCHMODE are trademarks of Motorola, Inc. Motorola, Inc. 1995 Motorola Bipolar Power Transistor Device Data 1 IIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIII IIII IIII IIII III IIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIII IIIIII IIII IIII IIII III IIII IIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIII IIIIII IIII IIII IIII III IIII IIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIII IIIIII III IIIIII IIII IIII IIII III IIII IIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIII IIIIII III IIIIII IIII IIII IIII III IIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII ELECTRICAL CHARACTERISTICS (TC = 25C unless otherwise noted) Characteristic Symbol Min Typ Max Unit VCEO(sus) VCER(sus) VCBO 550 600 630 700 1200 1320 Vdc VEBO 10 12.9 Vdc OFF CHARACTERISTICS Collector-Emitter Sustaining Voltage (IC = 100 mA, L = 25 mH) (IC = 200 mA, L = 25 mH, R = 200 ) Vdc Collector-Base Breakdown Voltage (ICBO = 1 mA, IE = 0) Emitter-Base Breakdown Voltage (IEBO = 1 mA, IC = 0) Collector Cutoff Current (VCE = 550 V, IB = 0) Collector Cutoff Current (VCE = 550 V, IB = 0) @ TC = 25C @ TC = 125C ICEO 200 2000 Adc Collector Cutoff Current (VCE = Rated VCES, VBE = 0) @ TC = 25C @ TC = 125C @ TC = 125C ICES 100 1000 100 Adc ICBO 100 Adc IEBO 100 Adc Collector Cutoff Current (VCE = 1000 V, VBE = 0) Collector Cutoff Current (VCB = 1200 V, IE = 0) Emitter-Cutoff Current (VEB = 9 Vdc, IC = 0) ON CHARACTERISTICS VBE(sat) Base-Emitter Saturation Voltage (IC = 1.3 Adc, IB = 0.13 Adc) Vdc @ TC = 25C @ TC = 125C 0.77 0.67 1 0.9 (IC = 2 Adc, IB = 0.4 Adc) @ TC = 25C @ TC = 125C 0.85 0.75 1.1 1 (IC = 3 Adc, IB = 0.6 Adc) @ TC = 25C @ TC = 125C 0.91 0.8 1.1 1 @ TC = 25C @ TC = 125C 0.3 0.4 0.75 1 @ TC = 25C @ TC = 125C 0.4 0.8 0.75 1.25 VCE(sat) Collector-Emitter Saturation Voltage (IC = 1.3 Adc, IB = 0.13 Adc) (IC = 3 Adc, IB = 0.6 Adc) Vdc hFE DC Current Gain (IC = 0.5 Adc, VCE = 5 Vdc) @ TC = 25C @ TC = 125C 18 @ TC = 25C @ TC = 125C 18 (IC = 3 Adc, VCE = 1 Vdc) @ TC = 25C @ TC = 125C 5 4 (IC = 10 mAdc, VCE = 5 Vdc) @ TC = 25C @ TC = 125C 11 (IC = 1 Adc, VCE = 5 Vdc) -- 25 25 45 20 8 6 -- 50 -- 33 DYNAMIC CHARACTERISTICS Current Gain Bandwidth (IC = 0.5 Adc, VCE = 10 Vdc, f = 1 MHz) Output Capacitance (VCB = 10 Vdc, IE = 0, f = 1 MHz) Input Capacitance (VEB = 8 Vdc) fT 13 MHz Cob 200 pF Cib 2000 pF DYNAMIC SATURATION VOLTAGE Dynamic Saturation Voltage: Determined 1 s and 3 s respectively after rising IB1 reaches 90% of final IB1 2 IC = 1.3 Adc IB1 = 130 mAdc VCC = 300 V @ 1 s @ TC = 25C @ 3 s @ TC = 25C 4.5 IC = 3 Adc IB1 = 0.6 Adc VCC = 300 V @ 1 s @ TC = 25C 14.5 @ 3 s @ TC = 25C 6 VCE(dsat) 7.5 V Motorola Bipolar Power Transistor Device Data IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII III IIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIII IIIIIIII IIIIII IIII IIII IIII III IIII IIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIII IIIIIIII IIIIII IIII IIII IIII III IIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII ELECTRICAL CHARACTERISTICS (TC = 25C unless otherwise noted) Characteristic Symbol Min Typ Max Unit SWITCHING CHARACTERISTICS: Resistive Load (D.C. 10%, Pulse Width = 40 s) Turn-on Time Turn-off Time Turn-on Time Turn-off Time IC = 3 Adc, IB1 = 0.6 Adc IB2 = 1.5 Adc VCC = 300 Vdc @ TC = 25C ton 200 350 ns @ TC = 25C @ TC = 125C toff 2 2.5 2.5 s IC = 3 Adc, IB1 = 0.6 Adc IB2 = 0.6 Adc VCC = 300 Vdc @ TC = 25C ton 190 250 ns @ TC = 25C @ TC = 125C toff 3.7 4.5 4.5 s 300 ns @ TC = 25C td 125 IC = 1 Adc, IB1 = 70 mAdc IB2 = 1 Adc VCC = 125 Vdc PW = 70 s Turn-on Time Turn-off Time Turn-on Time Turn-off Time IC = 1 Adc, IB1 = 100 mAdc IB2 = 500 mAdc VCC = 300 Vdc tr 400 750 ns ts 600 1.2 s tf 450 700 ns @ TC = 25C @ TC = 125C ton 250 225 350 ns @ TC = 25C @ TC = 125C toff 2 2.5 2.75 s @ TC = 25C SWITCHING CHARACTERISTICS: Inductive Load (Vclamp = 300 V, VCC = 15 V, L = 200 H) Fall Time @ TC = 25C @ TC = 125C tf 150 225 200 ns @ TC = 25C @ TC = 125C ts 1.6 1.9 2 s Crossover Time @ TC = 25C @ TC = 125C tc 260 300 350 ns Fall Time @ TC = 25C @ TC = 125C tf 300 400 450 ns @ TC = 25C @ TC = 125C ts 2.25 2.5 2.75 s Crossover Time @ TC = 25C @ TC = 125C tc 500 700 800 ns Fall Time @ TC = 25C @ TC = 125C tf 350 500 500 ns @ TC = 25C @ TC = 125C ts 4.25 5.1 5 s @ TC = 25C @ TC = 125C tc 600 1100 800 ns Storage Time Storage Time Storage Time IC = 1.3 Adc IB1 = 0.13 Adc IB2 = 0.65 Adc IC = 3 Adc IB1 = 0.6 Adc IB2 = 1.5 Adc IC = 3 Adc IB1 = 0.6 Adc IB2 = 0.6 Adc Crossover Time Motorola Bipolar Power Transistor Device Data 3 TYPICAL STATIC CHARACTERISTICS 100 100 TJ = 25C VCE = 1 V TJ = 125C hFE , DC CURRENT GAIN hFE , DC CURRENT GAIN TJ = 125C TJ = - 20C 10 1 0.001 0.01 0.1 1 IC, COLLECTOR CURRENT (AMPS) Figure 1. DC Current Gain @ 1 Volt TJ = 25C VCE , VOLTAGE (VOLTS) hFE , DC CURRENT GAIN TJ = - 20C TJ = 25C VCE(sat) VCE(sat) (I = 2 A) C (IC = 1 A) 7A 5A 4A 1 3A 0 1 0.001 0.01 0.1 1 IC, COLLECTOR CURRENT (AMPS) 10 10 100 1000 IB, BASE CURRENT (mA) 10000 Figure 4. Collector Saturation Region Figure 3. DC Current Gain @ 5 Volts 10 10 IC/IB = 5 IC/IB = 10 VCE , VOLTAGE (VOLTS) VCE , VOLTAGE (VOLTS) 10 2 VCE = 5 V TJ = 125C 1 0.1 0.01 0.001 0.01 0.1 1 IC, COLLECTOR CURRENT (AMPS) 1 0.1 TJ = 125C TJ = 25C TJ = - 20C TJ = 125C TJ = 25C TJ = - 20C 10 Figure 5A. Collector-Emitter Saturation Voltage 4 0.01 0.1 1 IC, COLLECTOR CURRENT (AMPS) Figure 2. DC Current Gain @ 3 Volts 100 10 VCE = 3 V TJ = - 20C 10 1 0.001 10 TJ = 25C 0.01 0.001 0.1 1 0.01 IC, COLLECTOR CURRENT (AMPS) 10 Figure 5B. Collector-Emitter Saturation Voltage Motorola Bipolar Power Transistor Device Data TYPICAL STATIC CHARACTERISTICS 10000 1.5 C, CAPACITANCE (pF) VBE , VOLTAGE (VOLTS) TJ = 25C f(test) = 1 MHz 1 TJ = - 20C TJ = 25C 0.5 TJ = 125C Cib (pF) 1000 Cob (pF) 100 IC/IB = 5 IC/IB = 10 10 0 0.001 0.1 1 0.01 IC, COLLECTOR CURRENT (AMPS) 1 10 10 VR, REVERSE VOLTAGE (VOLTS) Figure 6. Base-Emitter Saturation Region Figure 7. Capacitance 1600 8 1400 125C 6 1000 t, TIME ( s) t, TIME (ns) TJ = 25C TJ = 125C 7 IC/IB = 10 1200 25C IC/IB = 5 800 600 IB1 = IB2 VCC = 300 V PW = 20 s IC/IB = 5 5 4 3 400 IB1 = IB2 VCC = 300 V PW = 20 s 200 0.5 2 2.5 3 3.5 4 1.5 IC, COLLECTOR CURRENT (AMPS) 1 4.5 IC/IB = 10 2 0 1 5 0.5 Figure 8. Resistive Switching, ton TJ = 125C TJ = 25C 5 TJ = 125C TJ = 25C IC/IB = 5 3 3 Figure 10. Inductive Storage Time, tsi Motorola Bipolar Power Transistor Device Data 4.5 5 IB1 = IB2 VCC = 15 V VZ = 300 V LC = 200 H 4 IC = 2 A 2 2 2.5 1.5 IC, COLLECTOR CURRENT (AMPS) IC = 1 A 5 IC/IB = 10 1 1.5 2 2.5 3 3.5 4 IC, COLLECTOR CURRENT (AMPS) 6 IB1 = IB2 VCC = 15 V VZ = 300 V LC = 200 H 4 0.5 1 Figure 9. Resistive Switching, toff t si , STORAGE TIME (s) 6 t, TIME (ns) 100 3.5 3 3 5 7 11 9 hFE, FORCED GAIN 13 15 Figure 11. Inductive Storage Time 5 TYPICAL STATIC CHARACTERISTICS 1500 1100 TJ = 125C TJ = 25C IB1 = IB2 VCC = 15 V VZ = 300 V LC = 200 H t, TIME (ns) tc t, TIME (ns) 1000 tfi tc 500 tc 700 500 300 tfi 0 0 1 2 IC, COLLECTOR CURRENT (AMPS) tfi 100 3 1 2 3 IC, COLLECTOR CURRENT (AMPS) 0 Figure 12. Inductive Switching, tc & tfi @ IC/IB = 5 1200 IB1 = IB2 VCC = 15 V VZ = 300 V LC = 200 H TJ = 125C TJ = 25C TJ = 125C TJ = 25C t c , CROSSOVER TIME (ns) 480 IC = 2 A IC = 1 A 280 IB1 = IB2 VCC = 15 V VZ = 300 V LC = 200 H 1000 IC = 2 A 800 600 400 80 3 5 7 9 11 hFE, FORCED GAIN 13 IC = 1 A 200 15 3 Figure 14. Inductive Fall Time 5 6 9 10 11 7 8 hFE, FORCED GAIN 12 13 14 15 100 TJ = 25C 1200 1100 1000 900 800 BVCER(sus) @ 200 mA 700 600 10 100 RBE () Figure 16. BVCER = f (RBE) 1000 5 ms 1 ms 10 s 1 s 10 1 MJE18206-DC MJF18206-DC EXTENDED SOA IC, COLLECTOR CURRENT (AMPS) BVCER (VOLTS) @ 10 mA 1300 BVCER (VOLTS) 4 Figure 15. Inductive Crossover Time 1400 6 4 Figure 13. Inductive Switching, tc & tfi @ IC/IB = 10 680 t fi , FALL TIME (ns) TJ = 125C TJ = 25C IB1 = IB2 VCC = 15 V 900 VZ = 300 V LC = 200 H 0.1 0.01 1 100 10 VCE, COLLECTOR-EMITTER VOLTAGE (VOLTS) 1000 Figure 17. Forward Bias Safe Operating Area Motorola Bipolar Power Transistor Device Data TYPICAL STATIC CHARACTERISTICS 1.0 TC 125C GAIN 5 LC = 4 mH 8 POWER DERATING FACTOR IC, COLLECTOR CURRENT (AMPS) 10 6 4 2 -5 V 0V 0 -1.5 V 600 800 1000 VCE, COLLECTOR-EMITTER VOLTAGE (VOLTS) 400 1200 SECOND BREAKDOWN DERATING 0.8 0.6 0.4 THERMAL DERATING 0.2 0 20 Figure 18. Reverse Bias Switching Safe Operating Area There are two limitations on the power handling ability of a transistor: average junction temperature and second breakdown. Safe operating area curves indicate IC-VCE limits of the transistor that must be observed for reliable operation; i.e., the transistor must not be subjected to greater dissipation than the curves indicate. The data of Figure 17 is based on T C = 25C; T J(pk) is variable depending on power level. Second breakdown pulse limits are valid for duty cycles to 10% but must be derated when T C > 25C. Second breakdown limitations do not derate the same as thermal limitations. Allowable current at the voltages shown on Figure 17 may be found at any case temperature by using 40 60 80 100 120 TC, CASE TEMPERATURE (C) 140 160 Figure 19. Forward Bias Power Derating the appropriate curve on Figure 19. TJ(pk) may be calculated from the data in Figures 22 and 23. At any case temperatures, thermal limitations will reduce the power that can be handled to values less than the limitations imposed by second breakdown. For inductive loads, high voltage and current must be sustained simultaneously during turn-off with the base-to-emitter junction reverse biased. The safe level is specified as a reverse- biased safe operating area (Figure 18). This rating is verified under clamped conditions so that the device is never subjected to an avalanche mode. TYPICAL SWITCHING CHARACTERISTICS (IB1 = IB2 FOR ALL CURVES) 10 VCE 9 dyn 1 s IC 90% IC 8 dyn 3 s tfi tsi 7 6 0V Vclamp 5 10% IC 10% Vclamp tc 4 IB 90% IB 3 1 s 2 IB 90% IB1 1 2 1 3 s 0 TIME 0 3 4 5 6 8 7 TIME Figure 20. Dynamic Saturation Voltage Measurements Motorola Bipolar Power Transistor Device Data Figure 21. Inductive Switching Measurements 7 TYPICAL SWITCHING CHARACTERISTICS (IB1 = IB2 FOR ALL CURVES) Table 1. Inductive Load Switching Drive Circuit +15 V 1 F 100 3W 150 3W 100 F MTP8P10 MTP8P10 RB1 MPF930 MUR105 MPF930 +10 V Iout A 50 RB2 MJE210 COMMON 150 3W 500 F MTP12N10 1 F -Voff IC PEAK VCE PEAK VCE IB1 IB IB2 V(BR)CEO(sus) L = 10 mH RB2 = VCC = 20 Volts IC(pk) = 100 mA 8 Inductive Switching L = 200 H RB2 = 0 VCC = 15 Volts RB1 selected for desired IB1 RBSOA L = 500 H RB2 = 0 VCC = 15 Volts RB1 selected for desired IB1 Motorola Bipolar Power Transistor Device Data TYPICAL THERMAL RESPONSE (IB1 = IB2 FOR ALL CURVES) 1 r(t), TRANSIENT THERMAL RESISTANCE (NORMALIZED) 0.5 0.2 0.1 P(pk) 0.1 0.05 0.02 t1 t2 DUTY CYCLE, D = t1/t2 SINGLE PULSE 0.01 0.01 0.1 1 10 RJC(t) = r(t) RJC RJC = 1.25C/W MAX D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT t1 TJ(pk) - TC = P(pk) RJC(t) 100 1000 t, TIME (ms) Figure 22. Typical Thermal Response (ZJC(t)) for MJE18206 1 r(t), TRANSIENT THERMAL RESISTANCE (NORMALIZED) 0.5 0.2 P(pk) 0.1 0.1 0.05 t1 t2 DUTY CYCLE, D = t1/t2 0.02 SINGLE PULSE 0.01 0.01 0.1 1 10 100 1000 RJC(t) = r(t) RJC RJC = 3.55C/W MAX D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT t1 TJ(pk) - TC = P(pk) RJC(t) 10000 100000 t, TIME (ms) Figure 23. Typical Thermal Response (ZJC(t)) for MJF18206 Motorola Bipolar Power Transistor Device Data 9 TEST CONDITIONS FOR ISOLATION TESTS* CLIP MOUNTED FULLY ISOLATED PACKAGE CLIP LEADS HEATSINK MOUNTED FULLY ISOLATED PACKAGE 0.107 MIN MOUNTED FULLY ISOLATED PACKAGE LEADS LEADS HEATSINK HEATSINK 0.107 MIN 0.110 MIN Figure 24. Clip Mounting Position for Isolation Test Number 1 Figure 25. Clip Mounting Position for Isolation Test Number 2 Figure 26. Screw Mounting Position for Isolation Test Number 3 * Measurement made between leads and heatsink with all leads shorted together MOUNTING INFORMATION** 4-40 SCREW CLIP PLAIN WASHER HEATSINK COMPRESSION WASHER HEATSINK NUT Figure 27a. Screw-Mounted Figure 27b. Clip-Mounted Figure 27. Typical Mounting Techniques for Isolated Package Laboratory tests on a limited number of samples indicate, when using the screw and compression washer mounting technique, a screw torque of 6 to 8 in . lbs is sufficient to provide maximum power dissipation capability. The compression washer helps to maintain a constant pressure on the package over time and during large temperature excursions. Destructive laboratory tests show that using a hex head 4-40 screw, without washers, and applying a torque in excess of 20 in . lbs will cause the plastic to crack around the mounting hole, resulting in a loss of isolation capability. Additional tests on slotted 4-40 screws indicate that the screw slot fails between 15 to 20 in . lbs without adversely affecting the package. However, in order to positively ensure the package integrity of the fully isolated device, Motorola does not recommend exceeding 10 in . lbs of mounting torque under any mounting conditions. ** For more information about mounting power semiconductors see Application Note AN1040. 10 Motorola Bipolar Power Transistor Device Data PACKAGE DIMENSIONS B -T- F SEATING PLANE C T 4 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. S A Q 1 2 3 H DIM A B C D F G H J K L N Q R S T U V Z U K Z L R V J G D N INCHES MIN MAX 0.570 0.620 0.380 0.405 0.160 0.190 0.025 0.035 0.142 0.147 0.095 0.105 0.110 0.155 0.018 0.025 0.500 0.562 0.045 0.060 0.190 0.210 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 0.045 --- --- 0.080 STYLE 1: PIN 1. 2. 3. 4. MILLIMETERS MIN MAX 14.48 15.75 9.66 10.28 4.07 4.82 0.64 0.88 3.61 3.73 2.42 2.66 2.80 3.93 0.46 0.64 12.70 14.27 1.15 1.52 4.83 5.33 2.54 3.04 2.04 2.79 1.15 1.39 5.97 6.47 0.00 1.27 1.15 --- --- 2.04 BASE COLLECTOR EMITTER COLLECTOR CASE 221A-06 TO-220AB ISSUE Y -T- -B- F SEATING PLANE C S Q NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. U A 1 2 3 H -Y- K G N L D J R 3 PL 0.25 (0.010) M B M Y DIM A B C D F G H J K L N Q R S U INCHES MIN MAX 0.621 0.629 0.394 0.402 0.181 0.189 0.026 0.034 0.121 0.129 0.100 BSC 0.123 0.129 0.018 0.025 0.500 0.562 0.045 0.060 0.200 BSC 0.126 0.134 0.107 0.111 0.096 0.104 0.259 0.267 MILLIMETERS MIN MAX 15.78 15.97 10.01 10.21 4.60 4.80 0.67 0.86 3.08 3.27 2.54 BSC 3.13 3.27 0.46 0.64 12.70 14.27 1.14 1.52 5.08 BSC 3.21 3.40 2.72 2.81 2.44 2.64 6.58 6.78 STYLE 1: PIN 1. GATE 2. DRAIN 3. SOURCE CASE 221D-02 (ISOLATED TO-220 TYPE) UL RECOGNIZED: FILE #E69369 ISSUE D Motorola Bipolar Power Transistor Device Data 11 Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters can and do vary in different applications. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA / EUROPE: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. 1-800-441-2447 JAPAN: Nippon Motorola Ltd.; Tatsumi-SPD-JLDC, Toshikatsu Otsuki, 6F Seibu-Butsuryu-Center, 3-14-2 Tatsumi Koto-Ku, Tokyo 135, Japan. 03-3521-8315 MFAX: RMFAX0@email.sps.mot.com - TOUCHTONE (602) 244-6609 INTERNET: http://Design-NET.com HONG KONG: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852-26629298 12 Motorola Bipolar Power Transistor Device Data *MJE18206/D* MJE18206/D