EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet (Preliminary) Full Color Top View LEDs 67-03/S3GHBHC-B03/1T Features P-LCC-4 package. White package and black surface. Optical indicator. Colorless clear window. Ideal for backlight and light pipe application. Inter reflector. Wide viewing angle. Suitable for vapor-phase reflow, Infrared reflow and wave solder processes. Computable with automatic placement equipment. Available on tape and reel (8mm Tape). Pb-free. The product itself will remain with RoHS compliant version Descriptions The 67-03 series is available in soft orange, green,blue and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes the LED ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications Automotive: backlighting in dashboard and switch. Telecommunication: indicator and backlighting in telephone and fax. Flat backlight for LCD's, switches and symbols. Light pipe application. General use. Device Selection Guide Chip Lens Color Type S3 Material AlGaInP Emitted Color Reddish Orange GH InGaN/SiC Brilliant Green BH InGaN/SiC Blue Water Clear Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 1 of 13 Device No. : Prepared date:30-Jun-2006 Prepared by:Rita Shen EVERLIGHT ELECTRONICS CO.,LTD. 67-03/S3GHBHC-B03/1T Package Outline Dimensions CL 1 2 2.80.2 CL 4 0.70.1 2.20.1 3 3 4 2 1 3.50.2 2.80.2 0.150.05 0.80.1 1.90.2 2.40.1 0.50.1 3.20.2 2.70.2 For reflow soldering(propose) 1.6 1.8 0.7 1.8 2.2 0.80.1 Notes: 1.All dimensions are in millimeters 2.Tolerances Unless Dimension = 0.1mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 2 of 13 Device No. : Prepared date:30-Jun-2006 Prepared by:Rita Shen EVERLIGHT ELECTRONICS CO.,LTD. 67-03/S3GHBHC-B03/1T Absolute Maximum Ratings (Ta=25) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF S3 50 GH 30 BH 30 mA Operating Temperature Topr -40 ~ +85 Storage Temperature Tstg -40~ +100 Electrostatic Discharge(HBM) Power Dissipation Peak Forward Current(Duty 1/10 @ 1KHZ) ESD Pd IFP S3 2000 GH 1000 BH 1000 S3 120 GH 110 BH 110 S3 100 GH 100 BH 100 V mW mA Reflow Soldering : 260 for 10 sec. Soldering Temperature Tsol Hand Soldering : 350 for 3 sec. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 3 of 13 Device No. : Prepared date:30-Jun-2006 Prepared by:Rita Shen EVERLIGHT ELECTRONICS CO.,LTD. 67-03/S3GHBHC-B03/1T Electro-Optical Characteristics (Ta=25) Parameter Symbol Luminous Intensity IV p Peak Wavelength d Dominant Wavelength Spectrum Radiation Bandwidth Forward Voltage Viewing Angle Reverse Current VF S3 GH BH S3 GH BH S3 GH BH S3 GH BH S3 GH BH 21/2 IR S3 GH BH Min. Typ. Max. 140 ----- 285 715 ----- 1420 180 ----- 360 ----- 621 ----- ----- 518 ----- ----- 468 ----- 613.5 ----- 625.5 515 ----- 530 465.0 ----- 475.0 ----- 20 ----- ----- 30 ----- ----- 26 ----- ----- 2.0 2.4 ----- 3.5 3.9 ----- 3.5 3.9 ----- 120 ----- ----- ----- 10 ----- ----- 50 ----- ----- 50 Unit Condition mcd IF=20mA nm IF=20mA nm IF=20mA nm IF=20mA V IF=20mA deg IF=20mA A VR=5V Note: The luminous intensity data did not including 10% testing tolerance. The Dominant Wavelength data did not including 1nm testing tolerance. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 4 of 13 Device No. : Prepared date:30-Jun-2006 Prepared by:Rita Shen EVERLIGHT ELECTRONICS CO.,LTD. 67-03/S3GHBHC-B03/1T Bin Range Of Luminous Intensity Symbol Bin Code Min. Max. R2 140 180 S1 180 225 S2 225 285 V1 V2 715 900 900 1120 W1 1120 1420 S1 180 225 S2 225 285 T1 285 360 S3 Iv GH BH Unit Condition mcd IF =20mA Bin Range Of Dominant Wavelength Symbol d Chip S3 Bin Code Min. Max. Unit Condition E3 613.5 617.5 621.5 617.5 621.5 625.5 mcd IF =20mA E4 E5 Note: The luminous intensity data did not including 10% testing tolerance. The Dominant Wavelength data did not including 1nm testing tolerance. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 5 of 13 Device No. : Prepared date:30-Jun-2006 Prepared by:Rita Shen EVERLIGHT ELECTRONICS CO.,LTD. 67-03/S3GHBHC-B03/1T Typical Electro-Optical Characteristics Curves(S3) Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 6 of 13 Device No. : Prepared date:30-Jun-2006 Prepared by:Rita Shen EVERLIGHT ELECTRONICS CO.,LTD. 67-03/S3GHBHC-B03/1T Typical Electro-Optical Characteristics Curves(BH) Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 7 of 13 Device No. : Prepared date:30-Jun-2006 Prepared by:Rita Shen EVERLIGHT ELECTRONICS CO.,LTD. 67-03/S3GHBHC-B03/1T Typical Electro-Optical Characteristics Curves(GH) Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 8 of 13 Device No. : Prepared date:30-Jun-2006 Prepared by:Rita Shen EVERLIGHT ELECTRONICS CO.,LTD. 67-03/S3GHBHC-B03/1T Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: Tolerances Unless Dimension 0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 9 of 13 Device No. : Prepared date:30-Jun-2006 Prepared by:Rita Shen EVERLIGHT ELECTRONICS CO.,LTD. 67-03/S3GHBHC-B03/1T Carrier Tape Dimensions: Loaded quantity 1000 PCS per reel. + Note: Tolerances Unless Dimension 0.1mm , Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 10 of 13 Device No. : Prepared date:30-Jun-2006 Prepared by:Rita Shen EVERLIGHT ELECTRONICS CO.,LTD. 67-03/S3GHBHC-B03/1T Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level90% LTPD10% No. Items 1 Reflow Soldering 2 Temperature Cycle 3 4 5 Thermal Shock High Temperature Storage Low Temperature Storage Test Condition Temp. : 2605 Min 5sec. H : +100 15min 5 min L : -40 15min Test Hours/Cycles Sample Ac/Re Size 6 min 22 PCS. 0/1 300 Cycles 22 PCS. 0/1 H : +100 5min 10 sec L : -10 5min 300 Cycles 22 PCS. 0/1 Temp. : 100 1000 Hrs. 22 PCS. 0/1 Temp. : -40 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85/85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 11 of 13 Device No. : Prepared date:30-Jun-2006 Prepared by:Rita Shen EVERLIGHT ELECTRONICS CO.,LTD. 67-03/S3GHBHC-B03/1T Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 605 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 280 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 12 of 13 Device No. : Prepared date:30-Jun-2006 Prepared by:Rita Shen EVERLIGHT ELECTRONICS CO.,LTD. 67-03/S3GHBHC-B03/1T 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 13 of 13 Device No. : Prepared date:30-Jun-2006 Prepared by:Rita Shen