67-03/S3GHBHC-B03/1T - Everlight International Corp.

EVERLIGHT ELECTRONICS CO.,LTD.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 1 of 13

Device No. : Prepared date:30-Jun-2006 Prepared by:Rita Shen

Technical Data Sheet (Preliminary)

Full Color Top View LEDs

67-03/S3GHBHC-B03/1T

Features

․P-LCC-4 package.

․White package and black surface.

․Optical indicator.

․Colorless clear window.

․Ideal for backlight and light pipe application.

․Inter reflector.

․Wide viewing angle.

․Suitable for vapor-phase reflow, Infrared reflow and

wave solder processes.

․Computable with automatic placement equipment.

․Available on tape and reel (8mm Tape).

․Pb-free.

․The product itself will remain with RoHS

compliant version

Descriptions

․The 67-03 series is available in soft orange, green,blue

and yellow. Due to the package design, the LED has

wide viewing angle and optimized light coupling by

inter reflector. This feature makes the LED ideal for

light pipe application. The low current requirement

makes this device ideal for portable equipment or any

other application where power is at a premium.

Applications

․Automotive: backlighting in dashboard and switch.

․Telecommunication: indicator and backlighting in

telephone and fax.

․Flat backlight for LCD’s, switches and symbols.

․Light pipe application.

․General use.

Device Selection Guide

Chip

Type Material Emitted Color Lens Color

S3 AlGaInP Reddish Orange

GH InGaN/SiC Brilliant Green

BH InGaN/SiC Blue

Water Clear

EVERLIGHT ELECTRONICS CO.,LTD.

67-03/S3GHBHC-B03/1T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 2 of 13

Device No. : Prepared date:30-Jun-2006 Prepared by:Rita Shen

Package Outline Dimensions

0.8±0.1

2.2

1.81.61.8

For reflow soldering(propose)

C

L

C

L

0.7

3

1

0.7±0.1

2.2±0.1

2.8±0.2

3.5±0.2

3.2±0.2

2.4±0.1

2.8±0.2

2.7±0.2

0.5±0.1

0.15±0.05

1.9±0.2

0.8±0.1

1

4

3

2

4

2

Notes: 1.All dimensions are in millimeters

2.Tolerances Unless Dimension = ±0.1mm

EVERLIGHT ELECTRONICS CO.,LTD.

67-03/S3GHBHC-B03/1T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 3 of 13

Device No. : Prepared date:30-Jun-2006 Prepared by:Rita Shen

Absolute Maximum Ratings (Ta=25℃)

Parameter Symbol Rating Unit

Reverse Voltage VR 5 V

S3 50

GH 30

Forward Current IF

BH 30

mA

Operating Temperature Topr -40 ~ +85 ℃

Storage Temperature Tstg -40~ +100 ℃

S3 2000

GH 1000

Electrostatic

Discharge(HBM) ESD

BH 1000

V

S3 120

GH 110

Power Dissipation Pd

BH 110

mW

S3 100

GH 100

Peak Forward Current(Duty

1/10 @ 1KHZ) IFP

BH 100

mA

Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec.

Hand Soldering : 350 ℃ for 3 sec.

EVERLIGHT ELECTRONICS CO.,LTD.

67-03/S3GHBHC-B03/1T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 4 of 13

Device No. : Prepared date:30-Jun-2006 Prepared by:Rita Shen

Electro-Optical Characteristics (Ta=25℃)

Parameter Symbol Min. Typ. Max. Unit Condition

S3 140 ----- 285

GH 715 ----- 1420

Luminous Intensity IV

BH 180 ----- 360

mcd IF=20mA

S3 ----- 621 -----

GH ----- 518 -----

Peak Wavelength λp

BH ----- 468 -----

nm IF=20mA

S3 613.5 ----- 625.5

GH 515 ----- 530

Dominant Wavelength λd

BH 465.0 ----- 475.0

nm IF=20mA

S3 ----- 20 -----

GH ----- 30 -----

Spectrum Radiation

Bandwidth △λ

BH ----- 26 -----

nm IF=20mA

S3 ----- 2.0 2.4

GH ----- 3.5 3.9

Forward Voltage VF

BH ----- 3.5 3.9

V IF=20mA

Viewing Angle 2θ1/2 ----- 120 ----- deg IF=20mA

S3 ----- ----- 10

GH ----- ----- 50

Reverse Current IR

BH ----- ----- 50

μA VR=5V

Note:

The luminous intensity data did not including ±10% testing tolerance.

The Dominant Wavelength data did not including ±1nm testing tolerance.

EVERLIGHT ELECTRONICS CO.,LTD.

67-03/S3GHBHC-B03/1T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 5 of 13

Device No. : Prepared date:30-Jun-2006 Prepared by:Rita Shen

Bin Range Of Luminous Intensity

Symbol Bin Code Min. Max. Unit Condition

R2 140 180

S1 180 225

S3

S2 225 285

V1 715 900

V2 900 1120

GH

W1 1120 1420

S1 180 225

S2 225 285

Iv

BH

T1 285 360

mcd IF =20mA

Bin Range Of Dominant Wavelength

Symbol Chip Bin Code Min. Max. Unit Condition

E3 613.5 617.5

E4 617.5 621.5

λd S3

E5 621.5 625.5 mcd IF =20mA

Note:

The luminous intensity data did not including ±10% testing tolerance.

The Dominant Wavelength data did not including ±1nm testing tolerance.

EVERLIGHT ELECTRONICS CO.,LTD.

67-03/S3GHBHC-B03/1T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 6 of 13

Device No. : Prepared date:30-Jun-2006 Prepared by:Rita Shen

Typical Electro-Optical Characteristics Curves(S3)

EVERLIGHT ELECTRONICS CO.,LTD.

67-03/S3GHBHC-B03/1T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 7 of 13

Device No. : Prepared date:30-Jun-2006 Prepared by:Rita Shen

Typical Electro-Optical Characteristics Curves(BH)

EVERLIGHT ELECTRONICS CO.,LTD.

67-03/S3GHBHC-B03/1T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 8 of 13

Device No. : Prepared date:30-Jun-2006 Prepared by:Rita Shen

Typical Electro-Optical Characteristics Curves(GH)

EVERLIGHT ELECTRONICS CO.,LTD.

67-03/S3GHBHC-B03/1T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 9 of 13

Device No. : Prepared date:30-Jun-2006 Prepared by:Rita Shen

Label explanation

CAT: Luminous Intensity Rank

HUE: Dom. Wavelength Rank

REF: Forward Voltage Rank

Reel Dimensions

Note: Tolerances Unless Dimension ±0.1mm ,Unit = mm

EVERLIGHT ELECTRONICS CO.,LTD.

67-03/S3GHBHC-B03/1T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 10 of 13

Device No. : Prepared date:30-Jun-2006 Prepared by:Rita Shen

Carrier Tape Dimensions: Loaded quantity 1000 PCS per reel.

+

Note: Tolerances Unless Dimension ±0.1mm , Unit = mm

Moisture Resistant Packaging

Label Desiccant Label

Aluminum moisture-proof bag

EVERLIGHT ELECTRONICS CO.,LTD.

67-03/S3GHBHC-B03/1T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 11 of 13

Device No. : Prepared date:30-Jun-2006 Prepared by:Rita Shen

Reliability Test Items And Conditions

The reliability of products shall be satisfied with items listed below.

Confidence level：90%

LTPD：10%

No. Items Test Condition

Test

Hours/Cycles Sample

Size Ac/Re

1 Reflow Soldering

Temp. : 260℃±5℃

Min 5sec. 6 min 22 PCS. 0/1

2 Temperature Cycle

H : +100℃ 15min

∫ 5 min

L : -40℃ 15min

300 Cycles 22 PCS. 0/1

3 Thermal Shock

H : +100℃ 5min

∫ 10 sec

L : -10℃ 5min

300 Cycles 22 PCS. 0/1

4 High Temperature

Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1

5 Low Temperature

Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1

6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1

7 High Temperature /

High Humidity 85℃/85%RH 1000 Hrs. 22 PCS. 0/1

EVERLIGHT ELECTRONICS CO.,LTD.

67-03/S3GHBHC-B03/1T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 12 of 13

Device No. : Prepared date:30-Jun-2006 Prepared by:Rita Shen

Precautions For Use

1. Over-current-proof

Customer must apply resistors for protection, otherwise slight voltage shift will cause big

current change ( Burn out will happen ).

2. Storage

2.1 Do not open moisture proof bag before the products are ready to use.

2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less.

2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less.

If unused LEDs remain, it should be stored in moisture proof packages.

2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the

storage time, baking treatment should be performed using the following conditions.

Baking treatment : 60±5℃ for 24 hours.

3. Soldering Condition

3.1 Pb-free solder temperature profile

3.2 Reflow soldering should not be done more than two times.

3.3 When soldering, do not put stress on the LEDs during heating.

3.4 After soldering, do not warp the circuit board.

4.Soldering Iron

Each terminal is to go to the tip of soldering iron temperature less than 280℃ for 3

seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more

intervals, and do soldering of each terminal. Be careful because the damage of the product is often

started at the time of the hand solder.

EVERLIGHT ELECTRONICS CO.,LTD.

67-03/S3GHBHC-B03/1T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 13 of 13

Device No. : Prepared date:30-Jun-2006 Prepared by:Rita Shen

5.Repairing

Repair should not be done after the LEDs have been soldered. When repairing is

unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed

beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.

E

VERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936

Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306

Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com