SPEC NO: DSAB2955 REV NO: V.1 DATE: MAY/19/2002 PAGE: 1 OF 4
APPROVED : J. Lu CHECKED :Joe Lee DRAWN:L.ZHANG
SURFACE MOUNT DISPLAY
APSC03-41MWWA WHITE
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the lead emerge package.
4. Specifications are subject to change without notice.
Features
!0.3 INCH DIGIT HEIGHT.
!LOW CURRENT OPERATION.
!EXCELLENT CHARACTER APPEARANCE.
!I.C. COMPATIBLE.
!MECHANICALLY RUGGED.
!GRAY FACE,WHITE SEGMENT.
!PACKAGE : 1100PCS / REEL.
Package Dimensions& Internal Circuit Diagram
Description
The source color devices are made with GaN on SiC
Light Emitting Diode.
Static electricity and surge damage the LEDS. It is
recommended to use a wrist band or anti-electrostatic
glove when handling the LEDs.
All devices, equipment and machinery must be
electrically grounded.
SPEC NO: DSAB2955 REV NO: V.1 DATE: MAY/19/2002 PAGE: 2 OF 4
APPROVED : J. Lu CHECKED :Joe Lee DRAWN:L.ZHANG
Electrical / Optical Characteristics at T)=25°°
°°
°C
Selection Guide
lobmySlobmyS lobmyS lobmySlobmySretemaraPretemaraP retemaraP retemaraPretemaraPeciveDeciveD eciveD eciveDeciveD.pyT.pyT .pyT .pyT.pyT.xaM.xaM .xaM .xaM.xaMstinUstinU stinU stinUstinUsnoitidnoCtseTsnoitidnoCtseT snoitidnoCtseT snoitidnoCtseTsnoitidnoCtseT
V
F
egatloVdrawroFetihW8.35.4V I
F
Am02=
I
R
tnerruCesreveRetihW-01AuV
R
V5=
X
setanidrooCyticitamorhCetihW
33.0-- -
Y43.0-- -
.oNtraP.oNtraP .oNtraP .oNtraP.oNtraPeciDeciD eciD eciDeciDepyTsneLepyTsneL epyTsneL epyTsneLepyTsneL
)dcm(vI)dcm(vI )dcm(vI )dcm(vI)dcm(vI
Am02@ noitpircseDnoitpircseD noitpircseD noitpircseDnoitpircseD
.niM.niM .niM .niM.niM.pyT.pyT .pyT .pyT.pyT
AWWM14-30CSPA)NaG(ETIHWDESUFFIDETIHW45.31lamiceDdnaH.tR,edohtaCnommoC
Absolute Maximum Ratings at T)=25°°
°°
°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
retemaraPretemaraP retemaraP retemaraPretemaraP etihWetihW etihW etihWetihWstinUstinU stinU stinUstinU
noitapissidrewoP 501Wm
tnerruCdrawroFCD 03Am
]1[)kaeP(tnerruCdrawroF 051Am
egatloVesreveR 5V
erutarepmeTgnitarepO 04- °58+oTC °C
erutarepmeTegarotS 04- °58+oTC °C
SPEC NO: DSAB2955 REV NO: V.1 DATE: MAY/19/2002 PAGE: 3 OF 4
APPROVED : J. Lu CHECKED :Joe Lee DRAWN:L.ZHANG
White APSC03-41MWWA
APSC03-41MWWA
SMT Reflow Soldering Instruction
Number of reflow process shall be less than 2 times and cooling
process to normal temperature is required between first and
second soldering process.
SPEC NO: DSAB2955 REV NO: V.1 DATE: MAY/19/2002 PAGE: 4 OF 4
APPROVED : J. Lu CHECKED :Joe Lee DRAWN:L.ZHANG
Tape Specification
(Units : mm)
Recommended Soldering Pattern
(Units : mm)
