Philips Components Product specification Non-solid Al - electrolytic capacitors Radial Semi-Professional RSP 036 FEATURES * Polarized aluminium electrolytic capacitors, non-solid handbook, 4 columns * Radial leads, cylindrical aluminium case, all-insulated (light blue) * Natural pitch 2.5 mm and 5 mm * Charge and discharge proof * Miniaturized, high CV-product per unit volume MAM074 * Reduced leakage current. Fig.1 Component outlines. APPLICATIONS * Automotive, telecommunication, industrial, EDP and audio-video handbook, halfpage RMS 047 * Coupling, decoupling, smoothing, filtering, buffering, timing higher CV-values * Portable and mobile equipment (small size, low mass). RLC 013 low leakage current RSP 036 longer life RLL 116 standard grade RSM 037 MGC676 QUICK REFERENCE DATA DESCRIPTION VALUE Case sizes (Dnom x Lnom) 5 x 11 and 8.2 x 11 mm 0.47 to 470 F Rated capacitance range, CR 20% (10% on request) Tolerance on CR Rated voltage range, UR 6.3 to 160 V -55 to +85 C Category temperature range Endurance test at 85 C 2000 hours Useful life at 105 C 750 hours Useful life at 85 C 3000 hours Useful life at 40 C, 1.4 x IR applied 80000 hours Shelf life at 0 V, 85 C 500 hours Based on sectional specification IEC 384-4/CECC 30 300, LL grade Climatic category IEC 68 (DIN 40040) 55/085/56 (FPF) Approvals LNZ 44-04 (COJ) 1996 Nov 05 1 Philips Components Product specification Non-solid Al - electrolytic capacitors Radial Semi-Professional RSP 036 Selection chart for CR, UR and relevant nominal case sizes (D x L in mm) Preferred types in bold. UR (V) CR (F) 6.3 10 16 25 35 40 50 63 100 160 0.47 - - - - - - - 5 x 11 - - 1.0 - - - - - - - 5 x 11 - - 2.2 - - - - - - - 5 x 11 - 3.3 - - - - - - - 5 x 11 - 4.7 - - - - - - - 5 x 11 - 6.8 - - - - - - - 5 x 11 10 - - - - - - 5 x 11 5 x 11 - - - - - - - 8.2 x 11 15 - - - - - 5 x 11 - 5 x 11 - - - - 5 x 11 - - 5 x 11 - - - - - - - 8.2 x 11 - - 33 - - 5 x 11 - - 5 x 11 8.2 x 11 - - 47 - 5 x 11 - - 5 x 11 - 8.2 x 11 8.2 x 11 - - 68 - - - 5 x 11 - 8.2 x 11 - - 100 5 x 11 - 5 x 11 8.2 x 11 - - - 150 - 5 x 11 8.2 x 11 220 - 8.2 x 11 8.2 x 11 22 330 8.2 x 11 470(1) - - 8.2 x 11 8.2 x 11 - 8.2 x 11 - 8.2 x 11 8.2 x 11 - - 8.2 x 11 - - - - 8.2 x 11 - - - - - - - - - - - - - - - - - - - - - - - - - - 8.2 x 11 Note 1. For higher CV-values see "data sheet RMS 047". 1996 Nov 05 - - 8.2 x 11 8.2 x 11 2 Philips Components Product specification Non-solid Al - electrolytic capacitors Radial Semi-Professional RSP 036 MECHANICAL DATA, AVAILABLE FORMS AND PACKAGING QUANTITIES handbook, 2 columns O D handbook, 2 columns L OD L 1 4 0 15 min Od F MGB133 - 1 Od F 5 min MBC317 Dimensions in mm. For dimensions see Table 1. Dimensions in mm. For dimensions see Table 1. Fig.2 Form CA: Long leads. Table 1 Fig.3 Form CB: Cut leads. Physical dimensions, mass and packaging quantities; see Figs 2 and 3 NOMINAL CASE SIZE D x L (mm) PACKAGING QUANTITIES CASE CODE d (mm) Dmax (mm) Lmax (mm) F (mm) MASS (g) 5 x 11 11 0.5 5.5 12 2.5 0.5 8.2 x 11 13 0.6 8.7 12 5.0 0.5 1996 Nov 05 3 FORM CA, CB FORM TFA, TNA 0.4 1000 2000 1.1 1000 1000 Philips Components Product specification Non-solid Al - electrolytic capacitors Radial Semi-Professional RSP 036 Taped products handbook, 2 columns handbook, 4 columns MRA448 Form TNA. Pitch F = 2.5 mm. Case D x L = 5 x 11 mm only. Tape dimensions are specified in this handbook, Section "Packaging". Form TFA. Pitch F = 5 mm. Case D x L = 5 x 11 and 8.2 x 11 mm. Tape dimensions are specified in this handbook, Section "Packaging". Fig.4 Taped in box (ammopack). Fig.5 Taped in box (ammopack). MARKING The capacitors are marked (where possible) with the following information: * Rated capacitance (in F) * Tolerance on rated capacitance, code letter in accordance with "IEC 62" * Rated voltage (in V) * Group number (036) * Name of manufacturer (PH) * Date code in accordance with "IEC 62" * Code indicating factory of origin * Minus-sign on top to identify the negative terminal. 1996 Nov 05 MRA449 4 Philips Components Product specification Non-solid Al - electrolytic capacitors Radial Semi-Professional RSP 036 ELECTRICAL DATA Unless otherwise specified, all electrical values in Tables 2 and 4 apply at Tamb = 20 C, P = 86 to 106 kPa, RH = 45 to 75%. SYMBOL DESCRIPTION CR rated capacitance at 100 Hz, tolerance 20% IR rated RMS ripple current at 100 Hz, 85 C IL1 max. leakage current after 1 minute at UR IL5 max. leakage current after 5 minutes at UR Tan max. dissipation factor at 100 Hz ESR equivalent series resistance at 100 Hz (calculated from tan max and CR) Z max. impedance at 10 kHz and 20, -25 or -40 C Table 2 UR (V) 6.3 10 16 25 35 40 50 Electrical data; preferred types in bold CR 100 Hz (F) NOMINAL CASE SIZE D x L (mm) CASE CODE IR 85 C (mA) IL1 1 min (A) IL5 5 min (A) Tan 100 Hz ESR 100 Hz () Z 10 kHz 20 C () Z 10 kHz -25 C () 100 5 x 11 11 130 7 3.6 0.20 3.2 1.7 9.0 330 8.2 x 11 13 300 16 5.1 0.20 1.0 0.52 2.7 47 5 x 11 11 95 6 3.5 0.16 5.4 2.8 12 Z 10 kHz -40 C () 25 7.6 32 150 5 x 11 11 150 12 4.5 0.20 2.1 1.3 8.0 220 8.2 x 11 13 260 17 5.2 0.16 1.2 0.59 2.6 6.8 470 8.2 x 11 13 400 31 7.7 0.20 0.68 0.43 2.6 6.8 21 33 5 x 11 11 90 7 3.5 0.14 6.8 2.7 100 5 x 11 11 160 13 4.6 0.16 2.5 1.6 7.5 20.0 150 8.2 x 11 13 230 18 5.4 0.14 1.5 0.6 2.7 7.3 220 8.2 x 11 13 280 24 6.5 0.16 1.2 0.55 2.5 6.8 330 8.2 x 11 13 390 35 8.3 0.16 0.7 0.48 2.3 6.1 68 5 x 11 11 140 13 4.7 0.14 3.3 1.8 8.2 100 8.2 x 11 13 210 18 5.5 0.12 1.9 0.7 3.0 220 8.2 x 11 13 310 36 8.5 0.14 1 0.55 22 5 x 11 11 87 8 3.8 0.10 7.2 2.7 47 5 x 11 11 130 13 4.6 0.12 4.1 1.9 150 8.2 x 11 13 270 35 8.3 0.12 15 5 x 11 11 72 7 3.6 0.10 68 8.2 x 11 13 180 20 5.7 0.10 1.3 11 2.3 0.6 3.7 0.81 12 2.6 11 8.5 2.7 15 3.2 33 22 9.0 6.8 34 23 7.3 47 10 10 5 x 11 11 60 6 3.5 0.08 33 5 x 11 11 110 13 4.7 0.10 4.8 2.1 9.1 27 47 8.2 x 11 13 160 18 5.4 0.08 2.7 0.96 3.4 12 100 8.2 x 11 13 250 33 8.0 0.10 1.6 0.7 3.0 1996 Nov 05 5 13 4.5 16 58 9.0 Philips Components Product specification Non-solid Al - electrolytic capacitors Radial Semi-Professional RSP 036 ORDERING INFORMATION Ordering example Electrolytic capacitor RSP 036 100 F/16 V; 20% Nominal case size: 5 x 11 mm; Form TFA Catalogue number: 2222 036 35101. Table 3 Ordering information; preferred types in bold CATALOGUE NUMBER 2222 ... ..... UR (V) 6.3 10 16 25 35 40 50 CR 100 Hz (F) BULK PACKAGING CASE CODE TAPED AMMOPACK LONG LEADS CUT LEADS FORM CA F (mm) FORM CB F (mm) FORM TFA F (mm) FORM TNA F (mm) 100 11 036 53101 2.5 - - 036 33101 5.0 036 73101 2.5 330 13 036 53331 5.0 036 63331 5.0 036 33331 5.0 - - 47 11 036 54479 2.5 - - 036 34479 5.0 036 74479 2.5 150 11 036 54151 2.5 - - 036 34151 5.0 036 74151 2.5 220 13 036 54221 5.0 036 64221 5.0 036 34221 5.0 - - 470 13 036 54471 5.0 036 64471 5.0 036 34471 5.0 - - 33 11 036 55339 2.5 - - 036 35339 5.0 036 75339 2.5 100 11 036 55101 2.5 - - 036 35101 5.0 036 75101 2.5 150 13 036 55151 5.0 036 65151 5.0 036 35151 5.0 - - 220 13 036 55221 5.0 036 65221 5.0 036 35221 5.0 - - 330 13 036 55331 5.0 036 65331 5.0 036 35331 5.0 - - 68 11 036 56689 2.5 - - 036 36689 5.0 036 76689 2.5 100 13 036 56101 5.0 036 66101 5.0 036 36101 5.0 - - 220 13 036 56221 5.0 036 66221 5.0 036 36221 5.0 - - 22 11 036 90001 2.5 - - 036 90027 5.0 036 90389 2.5 47 11 036 90094 2.5 - - 036 90098 5.0 036 90391 2.5 150 13 036 90099 5.0 036 90101 5.0 036 90103 5.0 - - 15 11 036 57159 2.5 - - 036 37159 5.0 036 77159 2.5 68 13 036 57689 5.0 036 67689 5.0 036 37689 5.0 - - 10 11 036 90004 2.5 - - 036 90028 5.0 036 90392 2.5 33 11 036 90104 2.5 - - 036 90108 5.0 036 90393 2.5 47 13 036 90011 5.0 036 90012 5.0 036 90031 5.0 - - 100 13 036 90109 5.0 036 90111 5.0 036 90113 5.0 - - 1996 Nov 05 6 Philips Components Product specification Non-solid Al - electrolytic capacitors Radial Semi-Professional RSP 036 ELECTRICAL DATA (continued) Table 4 UR (V) Electrical data continued; preferred types in bold NOMINAL CR CASE SIZE 100 Hz D x L (F) (mm) 63 100 CASE CODE 0.47 5 x 11 11 1.0 5 x 11 2.2 5 x 11 3.3 IR 85 C (mA) IL1 1 min (A) IL5 5 min (A) Tan 100 Hz ESR 100 Hz () Z 10 kHz 20 C () Z 10 kHz -25 C () Z 10 kHz -40 C () 5 4 3 0.06 200 85 280 850 11 11 4 3.1 0.06 95 40 130 400 11 25 4 3.1 0.06 43 18 59 180 5 x 11 11 38 5 3.2 0.06 29 12 39 120 4.7 5 x 11 11 45 5 3.3 0.06 20 8.5 27 85 6.8 5 x 11 11 55 6 3.4 0.06 14 5.9 19 59 10 5 x 11 11 70 7 3.6 0.06 4.0 13 40 9.5 10 8.2 x 11 13 120 7 3.6 0.04 6.5 2.8 7 19 15 5 x 11 11 80 9 3.9 0.07 7.4 3.1 12 36 22 5 x 11 11 100 11 4.4 0.08 5.8 2.7 10 32 22 8.2 x 11 13 150 11 4.4 0.05 3.6 1.4 5.1 15 33 8.2 x 11 13 160 16 5.1 0.06 2.9 1.2 3.9 12 47 8.2 x 11 13 190 21 6.0 0.07 2.4 1.0 3.5 11 68 8.2 x 11 13 210 29 7.3 0.08 1.9 0.88 3.2 10 10 8.2 x 11 13 80 9 22 8.2 x 11 13 110 16 2.2 8.2 x 11 13 45 75 15 0.05 36 4.7 8.2 x 11 13 62 115 21 0.07 24 160 4 0.06 9.5 3.5 5.2 0.06 4.3 1.8 14 9.6 15 7.3 70 170 60 150 Additional electrical data PARAMETER CONDITIONS VALUE Voltage Surge voltage for short periods Us 1.15 UR Reverse voltage Urev 1 V Current Leakage current after 1 minute: UR = 6.3 to 100 V IL1 0.006CR x UR + 3 A UR = 160 V IL1 0.1CR x UR + 40 A after 5 minutes: UR = 6.3 to 100 V IL5 0.001CR x UR + 3 A UR = 160 V IL5 0.015CR x UR + 10 A Inductance Equivalent series inductance (ESL) 1996 Nov 05 case D x L = 5 x 11 mm typ. 13 nH case D x L = 8.2 x 11 mm typ. 16 nH 7 45 23 Philips Components Product specification Non-solid Al - electrolytic capacitors Radial Semi-Professional RSP 036 ORDERING INFORMATION (continued) Table 5 Ordering information continued; preferred types in bold CATALOGUE NUMBER 2222 ... ..... UR (V) 63 100 160 CR 100 Hz (F) BULK PACKAGING CASE CODE TAPED AMMOPACK LONG LEADS CUT LEADS FORM CA F (mm) FORM CB F (mm) FORM TFA F (mm) FORM TNA F (mm) 0.47 11 036 58477 2.5 - - 036 38477 5.0 036 78477 2.5 1.0 11 036 58108 2.5 - - 036 38108 5.0 036 78108 2.5 2.2 11 036 58228 2.5 - - 036 38228 5.0 036 78228 2.5 3.3 11 036 58338 2.5 - - 036 38338 5.0 036 78338 2.5 4.7 11 036 58478 2.5 - - 036 38478 5.0 036 78478 2.5 6.8 11 036 58688 2.5 - - 036 38688 5.0 035 78688 2.5 10 11 036 58109 2.5 - - 036 38109 5.0 036 78109 2.5 10 13 036 90036 5.0 036 90041 5.0 036 90181 5.0 - - 15 11 036 58159 2.5 - - 036 38159 5.0 036 78159 2.5 22 11 036 58229 2.5 - - 036 38229 5.0 036 78229 2.5 22 13 036 90117 5.0 036 90118 5.0 036 90139 5.0 - - 33 13 036 58339 5.0 036 68339 5.0 036 38339 5.0 - - 47 13 036 58479 5.0 036 68479 5.0 036 38479 5.0 - - 68 13 036 58689 5.0 036 68689 5.0 036 38689 5.0 - - 10 13 036 59109 5.0 036 69109 5.0 036 39109 5.0 - - 22 13 036 59229 5.0 036 69229 5.0 036 39229 5.0 - - 2.2 13 036 90333 5.0 036 90334 5.0 036 90336 5.0 - - 4.7 13 036 90337 5.0 036 90338 5.0 036 90341 5.0 - - 1996 Nov 05 8 Philips Components Product specification Non-solid Al - electrolytic capacitors Radial Semi-Professional RSP 036 ELECTRICAL DATA (continued) Capacitance (C) MBC240 1.1 5 handbook, 4 columns C C0 1 1.0 0.9 1 2 0.8 3 4 0.7 5 Curve 1: 63 V. Curve 2: 50 V. Curve 3: 35 V; 40 V; 100 V; 160 V. Curve 4: 16 V; 25 V. Curve 5: 6.3 V; 10 V. C0 = capacitance at 20 C, 100 Hz. 0.6 0.5 60 40 20 0 20 40 60 80 T amb ( oC) Fig.6 Typical multiplier of capacitance as a function of ambient temperature. MBC241 1.1 handbook, 4 columns C C0 1.0 1 2 3 0.9 4 5 0.8 6 0.7 Curve 1: 63 V (2.2 F). Curve 2: 63 V (>2.2 F). Curve 3: 50 V. Curve 4: 35 V; 40 V; 100 V; 160 V. Curve 5: 25 V. Curve 6: 16 V. Curve 7: 6.3 V; 10 V. C0 = capacitance at 20 C, 100 Hz. 7 0.6 0.5 10 10 2 10 3 10 4 Fig.7 Typical multiplier of capacitance as a function of frequency. 1996 Nov 05 9 f (Hz) 10 5 Philips Components Product specification Non-solid Al - electrolytic capacitors Radial Semi-Professional RSP 036 Equivalent series resistance (ESR) 10 MGB147 2 handbook, 4 columns 1 ESR ESR 0 2 10 1 10 Curve 1: 6.3 V; 100 V; 160 V. Curve 2: 63 V (10 F). ESR0 = typical at 20 C, 100 Hz. 2 1 1 50 0 50 T amb ( oC) 100 Fig.8 Typical multiplier of ESR as a function of ambient temperature. MGB126 2.0 handbook, 4 columns ESR ESR 0 1.6 2 1 1.2 0.8 1 0.4 2 Curve 1: 6.3 V. Curve 2: 63 V (10 F); 100 V; 160 V. ESR0 = typical at 20 C, 100 Hz. 0 10 10 2 10 3 10 4 Fig.9 Typical multiplier of ESR as a function of frequency. 1996 Nov 05 10 f (Hz) 10 5 Philips Components Product specification Non-solid Al - electrolytic capacitors Radial Semi-Professional RSP 036 Impedance (Z) MGB148 handbook, 4 columns 10 3 Curve 1: 0.47 F. Curve 2: 0.68 F. Curve 3: 1.0 F. Curve 4: 1.5 F. Curve 5: 2.2 F. Curve 6: 3.3 F. Curve 7: 4.7 F. Curve 8: 6.8 F. Curve 9: 10 F. Curve 10: 15 F. Curve 11: 22 F. Curve 12: 33 F. Curve 13: 47 F. Curve 14: 68 F. Curve 15: 100 F. Curve 16: 150 F. Case D x L = 5 x 11 mm. Tamb = 20 C. Z ( ) 10 2 10 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1 10 2 10 3 10 4 10 5 f (Hz) 10 6 Fig.10 Typical impedance as a function of frequency. MBC239 10 3 handbook, 4 columns Z ( ) 10 2 Curve 1: 2.2 F. Curve 2: 4.7 F. Curve 3: 10 F, 100 V. Curve 4: 10 F, 63 V. Curve 5: 22 F, 63 V. Curve 6: 33 F. Curve 7: 47 F. Curve 8: 68 F. Curve 9: 100 F. Curve 10: 150 F. Curve 11: 220 F. Curve 12: 330 F. Curve 13: 470 F. Case D x L = 8.2 x 11 mm. Tamb = 20 C. 10 5 6 7 8 9 10 11 12 13 1 2 3 4 1 10 1 10 2 10 3 10 4 Fig.11 Typical impedance as a function of frequency. 1996 Nov 05 11 105 f (Hz) 10 6 Philips Components Product specification Non-solid Al - electrolytic capacitors Radial Semi-Professional RSP 036 RIPPLE CURRENT AND USEFUL LIFE Table 6 Multiplier of ripple current (IR/IRO) as a function of frequency; IRO = ripple current at 100 Hz FREQUENCY (Hz) IR MULTIPLIER UR = 6.3 to 10 V UR = 16 to 35 V UR = 40 to 160 V 50 0.9 0.85 0.8 100 1.0 1.0 1.0 300 1.12 1.2 1.25 1000 1.2 1.3 1.4 3000 1.25 1.35 1.5 1.3 1.4 1.6 10000 MBC243 3.3 handbook, full pagewidth IA 3.2 IR 3.1 3.0 2.8 2.6 2.4 lifetime multiplier 2.2 0 1. 5 1. 2.0 0 2. 0 3. 1.8 0 4. 0 6. 1.6 15 20 (1) 30 50 70 1.2 1.0 0.8 0.5 0.0 10 1.4 40 50 60 70 80 90 100 T amb ( oC) IA = actual ripple current at 100 Hz. IR = rated ripple current at 100 Hz, 85 C. (1) Useful life at 85 C and IR applied: 3000 hours. Fig.12 Multiplier of useful life as a function of ambient temperature and ripple current load. 1996 Nov 05 12 Philips Components Product specification Non-solid Al - electrolytic capacitors Radial Semi-Professional RSP 036 SPECIFIC TESTS AND REQUIREMENTS General tests and requirements are specified in this handbook, Section "Tests and Requirements". Table 7 Test procedures and requirements TEST NAME OF TEST Endurance REFERENCE IEC 384-4/ CECC 30300 subclause 4.13 PROCEDURE (quick reference) Tamb = 85 C; UR applied; 2000 hours REQUIREMENTS UR 6.3 V; C/C: +15/-30% UR > 6.3 V; C/C: 15% tan 1.3 x spec. limit Z 2 x spec. limit IL5 spec. limit Useful life CECC 30301 subclause 1.8.1 Tamb = 85 C; UR and IR applied; 3000 hours UR 6.3 V; C/C: +45/-50% UR > 6.3 V; C/C: 45% tan 3 x spec. limit Z 3 x spec. limit IL5 spec. limit no short or open circuit total failure percentage: 1% Shelf life IEC 384-4/ (storage at high CECC 30300 temperature) subclause 4.17 1996 Nov 05 C/C, tan , Z: for requirements Tamb = 85 C; no voltage applied; 500 hours; see `Endurance test' above after test: UR to be applied for 30 minutes, IL5 spec. limit 24 to 48 hours before measurement 13