1996 Nov 05 1
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Radial Semi-Professional RSP 036
FEATURES
•Polarized aluminium electrolytic
capacitors, non-solid
•Radial leads, cylindrical aluminium
case, all-insulated (light blue)
•Natural pitch 2.5 mm and 5 mm
•Charge and discharge proof
•Miniaturized, high CV-product per
unit volume
•Reduced leakage current.
APPLICATIONS
•Automotive, telecommunication,
industrial, EDP and audio-video
•Coupling, decoupling, smoothing,
filtering, buffering, timing
•Portable and mobile equipment
(small size, low mass).
Fig.1 Component outlines.
handbook, 4 columns
MAM074
handbook, halfpage
RSP 036
MGC676
RLC 013 RLL 116
longer
life
low
leakage
current
RMS 047
higher
CV-values
standard
grade
RSM 037
QUICK REFERENCE DATA
DESCRIPTION VALUE
Case sizes (∅Dnom ×Lnom)5×11 and 8.2 ×11 mm
Rated capacitance range, CR0.47 to 470 µF
Tolerance on CR±20% (±10% on request)
Rated voltage range, UR6.3 to 160 V
Category temperature range −55 to +85 °C
Endurance test at 85 °C 2000 hours
Useful life at 105 °C 750 hours
Useful life at 85 °C 3000 hours
Useful life at 40 °C, 1.4 ×IR applied 80000 hours
Shelf life at 0 V, 85 °C 500 hours
Based on sectional specification IEC 384-4/CECC 30 300, LL grade
Climatic category IEC 68 (DIN 40040) 55/085/56 (FPF)
Approvals LNZ 44-04 (COJ)
1996 Nov 05 2
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Radial Semi-Professional RSP 036
Selection chart for CR, UR and relevant nominal case sizes (∅D×L in mm)
Preferred types in bold.
Note
1. For higher CV-values see
“data sheet RMS 047”
.
CR
(µF) UR (V)
6.3 10 16 25 35 40 50 63 100 160
0.47 −−−−−−−5×11 −−
1.0 −−−−−−−5×11 −−
2.2 −−−−−−−5×11 −8.2 ×11
3.3 −−−−−−−5×11 −
4.7 −−−−−−−5×11 −8.2 ×11
6.8 −−−−−−−5×11 −−
10 −−−−−−5×11 5×11 8.2 ×11 −
−−−−−−−8.2 ×11 −−
15 −−−−−5×11 −5×11 −
22 −−−−5×11 −−5×11 8.2 ×11 −
−−−−−−−8.2 ×11 −−
33 −−5×11 −−5×11 8.2 ×11 −−
47 −5×11 −−5×11 −8.2 ×11 8.2 ×11 −−
68 −−−5×11 −8.2 ×11 −8.2 ×11 −−
100 5 ×11 −5×11 8.2 ×11 −−8.2 ×11 −−−
150 −5×11 8.2 ×11 8.2 ×11 −−−−−
220 −8.2 ×11 8.2 ×11 8.2 ×11 −−−−−−
330 8.2 ×11 −8.2 ×11 −−−−−−−
470(1) −8.2 ×11 −−−−−−−−
1996 Nov 05 3
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Radial Semi-Professional RSP 036
MECHANICAL DATA, AVAILABLE FORMS AND PACKAGING QUANTITIES
Fig.2 Form CA: Long leads.
handbook, 2 columns
MBC317
L
O D
F15 min
5 min
dO
Dimensions in mm.
For dimensions see Table 1.
Fig.3 Form CB: Cut leads.
handbook, 2 columns
L
MGB133 - 1
4
F
1
0Od
OD
Dimensions in mm.
For dimensions see Table 1.
Table 1 Physical dimensions, mass and packaging quantities; see Figs 2 and 3
NOMINAL
CASE SIZE
∅D×L
(mm)
CASE
CODE ∅d
(mm) ∅Dmax
(mm) Lmax
(mm) F
(mm) MASS
(g)
PACKAGING QUANTITIES
FORM
CA, CB FORM
TFA, TNA
5×11 11 0.5 5.5 12 2.5 ±0.5 ≈0.4 1000 2000
8.2 ×11 13 0.6 8.7 12 5.0 ±0.5 ≈1.1 1000 1000
1996 Nov 05 4
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Radial Semi-Professional RSP 036
Taped products
Fig.4 Taped in box (ammopack).
Form TFA.
Pitch F = 5 mm.
Case ∅D×L=5×11 and 8.2 ×11 mm.
Tape dimensions are specified in this handbook, Section
“Packaging”
.
handbook, 4 columns
MRA448
Fig.5 Taped in box (ammopack).
Form TNA.
Pitch F = 2.5 mm.
Case ∅D×L=5×11 mm only.
Tape dimensions are specified in this
handbook, Section
“Packaging”.
handbook, 2 columns
MRA449
MARKING
The capacitors are marked (where possible) with the following information:
•Rated capacitance (in µF)
•Tolerance on rated capacitance, code letter in accordance with
“IEC 62”
•Rated voltage (in V)
•Group number (036)
•Name of manufacturer (PH)
•Date code in accordance with
“IEC 62”
•Code indicating factory of origin
•Minus-sign on top to identify the negative terminal.
1996 Nov 05 5
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Radial Semi-Professional RSP 036
ELECTRICAL DATA
Unless otherwise specified, all electrical values in Tables 2 and 4 apply at Tamb =20°C,
P = 86 to 106 kPa, RH = 45 to 75%.
Table 2 Electrical data; preferred types in bold
SYMBOL DESCRIPTION
CRrated capacitance at 100 Hz, tolerance ±20%
IRrated RMS ripple current at 100 Hz, 85 °C
IL1 max. leakage current after 1 minute at UR
IL5 max. leakage current after 5 minutes at UR
Tan δmax. dissipation factor at 100 Hz
ESR equivalent series resistance at 100 Hz (calculated from tan δmax and CR)
Z max. impedance at 10 kHz and 20, −25 or −40 °C
UR
(V)
CR
100 Hz
(µF)
NOMINAL
CASE SIZE
∅D×L
(mm)
CASE
CODE
IR
85 °C
(mA)
IL1
1 min
(µA)
IL5
5 min
(µA)
Tan δ
100 Hz
ESR
100 Hz
(Ω)
Z
10 kHz
20 °C
(Ω)
Z
10 kHz
−25 °C
(Ω)
Z
10 kHz
−40 °C
(Ω)
6.3 100 5 ×11 11 130 7 3.6 0.20 3.2 1.7 9.0 25
330 8.2 ×11 13 300 16 5.1 0.20 1.0 0.52 2.7 7.6
10 47 5 ×11 11 95 6 3.5 0.16 5.4 2.8 12 32
150 5 ×11 11 150 12 4.5 0.20 2.1 1.3 8.0 21
220 8.2 ×11 13 260 17 5.2 0.16 1.2 0.59 2.6 6.8
470 8.2 ×11 13 400 31 7.7 0.20 0.68 0.43 2.6 6.8
16 33 5 ×11 11 90 7 3.5 0.14 6.8 2.7 12 33
100 5 ×11 11 160 13 4.6 0.16 2.5 1.6 7.5 20.0
150 8.2 ×11 13 230 18 5.4 0.14 1.5 0.6 2.7 7.3
220 8.2 ×11 13 280 24 6.5 0.16 1.2 0.55 2.5 6.8
330 8.2 ×11 13 390 35 8.3 0.16 0.7 0.48 2.3 6.1
25 68 5 ×11 11 140 13 4.7 0.14 3.3 1.8 8.2 22
100 8.2 ×11 13 210 18 5.5 0.12 1.9 0.7 3.0 9.0
220 8.2 ×11 13 310 36 8.5 0.14 1 0.55 2.6 6.8
35 22 5 ×11 11 87 8 3.8 0.10 7.2 2.7 11 34
47 5 ×11 11 130 13 4.6 0.12 4.1 1.9 8.5 23
150 8.2 ×11 13 270 35 8.3 0.12 1.3 0.6 2.7 7.3
40 15 5 ×11 11 72 7 3.6 0.10 11 3.7 15 47
68 8.2 ×11 13 180 20 5.7 0.10 2.3 0.81 3.2 10
50 10 5 ×11 11 60 6 3.5 0.08 13 4.5 16 58
33 5 ×11 11 110 13 4.7 0.10 4.8 2.1 9.1 27
47 8.2 ×11 13 160 18 5.4 0.08 2.7 0.96 3.4 12
100 8.2 ×11 13 250 33 8.0 0.10 1.6 0.7 3.0 9.0
1996 Nov 05 6
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Radial Semi-Professional RSP 036
ORDERING INFORMATION
Ordering example
Electrolytic capacitor RSP 036
100 µF/16 V; ±20%
Nominal case size: ∅5×11 mm; Form TFA
Catalogue number: 2222 036 35101.
Table 3 Ordering information; preferred types in bold
UR
(V)
CR
100 Hz
(µF)
CASE
CODE
CATALOGUE NUMBER 2222 ... .....
BULK PACKAGING TAPED AMMOPACK
LONG LEADS CUT LEADS
FORM
CA F
(mm) FORM
CB F
(mm) FORM
TFA F
(mm) FORM
TNA F
(mm)
6.3 100 11 036 53101 2.5 −−036 33101 5.0 036 73101 2.5
330 13 036 53331 5.0 036 63331 5.0 036 33331 5.0 −−
10 47 11 036 54479 2.5 −−036 34479 5.0 036 74479 2.5
150 11 036 54151 2.5 −−036 34151 5.0 036 74151 2.5
220 13 036 54221 5.0 036 64221 5.0 036 34221 5.0 −−
470 13 036 54471 5.0 036 64471 5.0 036 34471 5.0 −−
16 33 11 036 55339 2.5 −−036 35339 5.0 036 75339 2.5
100 11 036 55101 2.5 −−036 35101 5.0 036 75101 2.5
150 13 036 55151 5.0 036 65151 5.0 036 35151 5.0 −−
220 13 036 55221 5.0 036 65221 5.0 036 35221 5.0 −−
330 13 036 55331 5.0 036 65331 5.0 036 35331 5.0 −−
25 68 11 036 56689 2.5 −−036 36689 5.0 036 76689 2.5
100 13 036 56101 5.0 036 66101 5.0 036 36101 5.0 −−
220 13 036 56221 5.0 036 66221 5.0 036 36221 5.0 −−
35 22 11 036 90001 2.5 −−036 90027 5.0 036 90389 2.5
47 11 036 90094 2.5 −−036 90098 5.0 036 90391 2.5
150 13 036 90099 5.0 036 90101 5.0 036 90103 5.0 −−
40 15 11 036 57159 2.5 −−036 37159 5.0 036 77159 2.5
68 13 036 57689 5.0 036 67689 5.0 036 37689 5.0 −−
50 10 11 036 90004 2.5 −−036 90028 5.0 036 90392 2.5
33 11 036 90104 2.5 −−036 90108 5.0 036 90393 2.5
47 13 036 90011 5.0 036 90012 5.0 036 90031 5.0 −−
100 13 036 90109 5.0 036 90111 5.0 036 90113 5.0 −−
1996 Nov 05 7
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Radial Semi-Professional RSP 036
ELECTRICAL DATA (continued)
Table 4 Electrical data continued; preferred types in bold
Additional electrical data
UR
(V)
CR
100 Hz
(µF)
NOMINAL
CASE SIZE
∅D×L
(mm)
CASE
CODE
IR
85 °C
(mA)
IL1
1 min
(µA)
IL5
5 min
(µA)
Tan δ
100 Hz
ESR
100 Hz
(Ω)
Z
10 kHz
20 °C
(Ω)
Z
10 kHz
−25 °C
(Ω)
Z
10 kHz
−40 °C
(Ω)
63 0.47 5 ×11 11 5 4 3 0.06 200 85 280 850
1.0 5 ×11 11 11 4 3.1 0.06 95 40 130 400
2.2 5 ×11 11 25 4 3.1 0.06 43 18 59 180
3.3 5 ×11 11 38 5 3.2 0.06 29 12 39 120
4.7 5 ×11 11 45 5 3.3 0.06 20 8.5 27 85
6.8 5 ×11 11 55 6 3.4 0.06 14 5.9 19 59
10 5 ×11 11 70 7 3.6 0.06 9.5 4.0 13 40
10 8.2 ×11 13 120 7 3.6 0.04 6.5 2.8 7 19
15 5 ×11 11 80 9 3.9 0.07 7.4 3.1 12 36
22 5 ×11 11 100 11 4.4 0.08 5.8 2.7 10 32
22 8.2 ×11 13 150 11 4.4 0.05 3.6 1.4 5.1 15
33 8.2 ×11 13 160 16 5.1 0.06 2.9 1.2 3.9 12
47 8.2 ×11 13 190 21 6.0 0.07 2.4 1.0 3.5 11
68 8.2 ×11 13 210 29 7.3 0.08 1.9 0.88 3.2 10
100 10 8.2 ×11 13 80 9 4 0.06 9.5 3.5 15 45
22 8.2 ×11 13 110 16 5.2 0.06 4.3 1.8 7.3 23
160 2.2 8.2 ×11 13 45 75 15 0.05 36 14 70 170
4.7 8.2 ×11 13 62 115 21 0.07 24 9.6 60 150
PARAMETER CONDITIONS VALUE
Voltage
Surge voltage for short periods Us≤1.15 UR
Reverse voltage Urev ≤1V
Current
Leakage current after 1 minute:
UR= 6.3 to 100 V IL1 ≤0.006CR×UR+3µA
U
R= 160 V IL1 ≤0.1CR×UR+40µA
after 5 minutes:
UR= 6.3 to 100 V IL5 ≤0.001CR×UR+3µA
U
R= 160 V IL5 ≤0.015CR×UR+10µA
Inductance
Equivalent series inductance (ESL) case ∅D×L=5×11 mm typ. 13 nH
case ∅D×L = 8.2 ×11 mm typ. 16 nH
1996 Nov 05 8
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Radial Semi-Professional RSP 036
ORDERING INFORMATION (continued)
Table 5 Ordering information continued; preferred types in bold
UR
(V)
CR
100 Hz
(µF)
CASE
CODE
CATALOGUE NUMBER 2222 ... .....
BULK PACKAGING TAPED AMMOPACK
LONG LEADS CUT LEADS
FORM
CA F
(mm) FORM
CB F
(mm) FORM
TFA F
(mm) FORM
TNA F
(mm)
63 0.47 11 036 58477 2.5 −−036 38477 5.0 036 78477 2.5
1.0 11 036 58108 2.5 −−036 38108 5.0 036 78108 2.5
2.2 11 036 58228 2.5 −−036 38228 5.0 036 78228 2.5
3.3 11 036 58338 2.5 −−036 38338 5.0 036 78338 2.5
4.7 11 036 58478 2.5 −−036 38478 5.0 036 78478 2.5
6.8 11 036 58688 2.5 −−036 38688 5.0 035 78688 2.5
10 11 036 58109 2.5 −−036 38109 5.0 036 78109 2.5
10 13 036 90036 5.0 036 90041 5.0 036 90181 5.0 −−
15 11 036 58159 2.5 −−036 38159 5.0 036 78159 2.5
22 11 036 58229 2.5 −−036 38229 5.0 036 78229 2.5
22 13 036 90117 5.0 036 90118 5.0 036 90139 5.0 −−
33 13 036 58339 5.0 036 68339 5.0 036 38339 5.0 −−
47 13 036 58479 5.0 036 68479 5.0 036 38479 5.0 −−
68 13 036 58689 5.0 036 68689 5.0 036 38689 5.0 −−
100 10 13 036 59109 5.0 036 69109 5.0 036 39109 5.0 −−
22 13 036 59229 5.0 036 69229 5.0 036 39229 5.0 −−
160 2.2 13 036 90333 5.0 036 90334 5.0 036 90336 5.0 −−
4.7 13 036 90337 5.0 036 90338 5.0 036 90341 5.0 −−
1996 Nov 05 9
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Radial Semi-Professional RSP 036
ELECTRICAL DATA (continued)
Capacitance (C)
Fig.6 Typical multiplier of capacitance as a function of ambient temperature.
Curve 1: 63 V.
Curve 2: 50 V.
Curve 3: 35 V; 40 V; 100 V; 160 V.
Curve 4: 16 V; 25 V.
Curve 5: 6.3 V; 10 V.
C0= capacitance at 20 °C, 100 Hz.
handbook, 4 columns
0.5 60 0 20
MBC240
40 20 40 60 80
Tamb ( C)
o
0.6
0.7
0.8
0.9
1.0
1.1
C
0
C
2
1
3
4
5
1
5
Fig.7 Typical multiplier of capacitance as a function of frequency.
Curve 1: 63 V (≤2.2 µF).
Curve 2: 63 V (>2.2 µF).
Curve 3: 50 V.
Curve 4: 35 V; 40 V; 100 V; 160 V.
Curve 5: 25 V.
Curve 6: 16 V.
Curve 7: 6.3 V; 10 V.
C0= capacitance at 20 °C, 100 Hz.
handbook, 4 columns
0.5 105
MBC241
104
103
102
10 f (Hz)
0.6
0.7
0.8
0.9
1.0
1.1
C
0
C
2
1
3
4
6
5
7
1996 Nov 05 10
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Radial Semi-Professional RSP 036
Equivalent series resistance (ESR)
Fig.8 Typical multiplier of ESR as a function of ambient temperature.
Curve 1: 6.3 V; 100 V; 160 V.
Curve 2: 63 V (≥10 µF).
ESR0= typical at 20 °C, 100 Hz.
handbook, 4 columns
MGB147
0 50 100
1
10
50 Tamb ( C)
o
ESR0
ESR
10 1
10 2
2
1
2
1
Fig.9 Typical multiplier of ESR as a function of frequency.
Curve 1: 6.3 V.
Curve 2: 63 V (≥10 µF); 100 V; 160 V.
ESR0= typical at 20 °C, 100 Hz.
handbook, 4 columns
0105
MGB126
104
103
102
10 f (Hz)
0.4
0.8
1.2
1.6
2.0
2
1
ESR0
ESR
1
2
1996 Nov 05 11
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Radial Semi-Professional RSP 036
Impedance (Z)
Fig.10 Typical impedance as a function of frequency.
Curve 1: 0.47 µF.
Curve 2: 0.68 µF.
Curve 3: 1.0 µF.
Curve 4: 1.5 µF.
Curve 5: 2.2 µF.
Curve 6: 3.3 µF.
Curve 7: 4.7 µF.
Curve 8: 6.8 µF.
Curve 9: 10 µF.
Curve 10: 15 µF.
Curve 11: 22 µF.
Curve 12: 33 µF.
Curve 13: 47 µF.
Curve 14: 68 µF.
Curve 15: 100 µF.
Curve 16: 150 µF.
Case ∅D×L=5×11 mm.
Tamb =20°C.
handbook, 4 columns
106
MGB148
105
104
103
102f (Hz)
103
10
1
102
Z
( )Ω
2
1
3
6
5
7
8
10
9
11
12
13
14
15
16
4
Fig.11 Typical impedance as a function of frequency.
Curve 1: 2.2 µF.
Curve 2: 4.7 µF.
Curve 3: 10 µF, 100 V.
Curve 4: 10 µF, 63 V.
Curve 5: 22 µF, 63 V.
Curve 6: 33 µF.
Curve 7: 47 µF.
Curve 8: 68 µF.
Curve 9: 100 µF.
Curve 10: 150 µF.
Curve 11: 220 µF.
Curve 12: 330 µF.
Curve 13: 470 µF.
Case ∅D×L = 8.2 ×11 mm.
Tamb =20°C.
handbook, 4 columns
MBC239
65 1010
103
102
10
1
f (Hz)
Z
( )Ω
102103104
10 1
2
1
3
4
6
5
7
8
10
9
11
12
13
1996 Nov 05 12
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Radial Semi-Professional RSP 036
RIPPLE CURRENT AND USEFUL LIFE
Table 6 Multiplier of ripple current (IR/IRO) as a function of frequency; IRO = ripple current at 100 Hz
FREQUENCY
(Hz) IR MULTIPLIER
UR= 6.3 to 10 V UR=16to35V U
R= 40 to 160 V
50 0.9 0.85 0.8
100 1.0 1.0 1.0
300 1.12 1.2 1.25
1000 1.2 1.3 1.4
3000 1.25 1.35 1.5
≥10000 1.3 1.4 1.6
Fig.12 Multiplier of useful life as a function of ambient temperature and ripple current load.
IA= actual ripple current at 100 Hz.
IR= rated ripple current at 100 Hz, 85 °C.
(1) Useful life at 85 °C and IR applied: 3000 hours.
handbook, full pagewidth
3.3
3.2
3.0
2.8
2.6
2.4
2.2
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.5
0.0
3.1
40 50 60 70 80 90 100
T ( C)
amb o
IA
R
I
MBC243
lifetime multiplier
(1)
70
50
6.0
4.0
2.0
1.5
30
15
10
3.0
20
1.0
1996 Nov 05 13
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Radial Semi-Professional RSP 036
SPECIFIC TESTS AND REQUIREMENTS
General tests and requirements are specified in this handbook, Section
“Tests and Requirements”.
Table 7 Test procedures and requirements
TEST PROCEDURE
(quick reference) REQUIREMENTS
NAME OF
TEST REFERENCE
Endurance IEC 384-4/
CECC 30300
subclause 4.13
Tamb =85°C; UR applied;
2000 hours UR≤6.3 V; ∆C/C: +15/−30%
UR>6.3 V; ∆C/C: ±15%
tan δ≤1.3 ×spec. limit
Z≤2×spec. limit
IL5 ≤spec. limit
Useful life CECC 30301
subclause 1.8.1 Tamb =85°C; UR and IR applied;
3000 hours UR≤6.3 V; ∆C/C: +45/−50%
UR>6.3 V; ∆C/C: ±45%
tan δ≤3×spec. limit
Z≤3×spec. limit
IL5 ≤spec. limit
no short or open circuit
total failure percentage: ≤1%
Shelf life
(storage at high
temperature)
IEC 384-4/
CECC 30300
subclause 4.17
Tamb =85°C; no voltage applied;
500 hours;
after test: UR to be applied for 30 minutes,
24 to 48 hours before measurement
∆C/C, tan δ, Z: for requirements
see ‘Endurance test’ above
IL5 ≤spec. limit
