MIL-PRF-39012/69C
I nser tion force test:
S teel test pin diameter: .0 21 inch, minimum.
Insertion depth: .050 inch, m inimum.
Test pin finish: 16 microinches.
Insertion force: 2.5 pounds, maximum.
Wi thdr awal for ce test:
Steel test pi n d i ameter : .019 inch, m aximum.
Insertion depth: .050 inch, minimum .
Test pin finish: 16 microinches.
Withdr aw al force: 1 ounce, minimum.
Hermeti c seal: Not appli cable.
Leak age (pr essur iz ed c onnec tors ) : Not applicable.
I nsulation resistance: I n accordanc e with MIL-STD-202, m ethod 302, test c ondition B, 1,000 megohms
minimum.
Center c ont act r etention:
A xial force: 4 pounds m inimum axial force. Appl i cable to captivated center contacts only.
Radial tor que: N ot appl icable.
Res is tanc e to test prod damage: Not appl i cable.
S alt atmos phere (corr osion): In ac cor danc e with MIL-STD-202 method 101, tes t condi ti o n B.
V oltage standin g wave ratio ( VSWR): From 500 MHz to 4 GHz, or approximately 80 per cent of the
upper cutoff fr equency of the c able, wh i chever i s l ower .
Cable gr oup VSWR
I 1.45 + 0.06 (F) GHz
II, IIa, 1.35 + 0.04 (F) GHz
S wept frequency V SWR test set up:
Item 6: VSWR shall be less than 1.05 +.0025F (F in GHz ).
Ite m 16: VSWR sh all be less than 1.05 +.0025F (F in GHz).