SPEC NO: DSAB2333 REV NO: V.1 DATE: MAY/09/2002 PAGE: 1 OF 4
APPROVED: J.LU CHECKED: Allen Liu DRAWN: D.L.HUANG
Package Dimensions
AP3216HC BRIGHT RED
3.2x1.6mm SMD CHIP LED LAMP
Features
!3.2mmx1.6mm SMT LED, 1.1mm THICKNESS.
!LOW POWER CONSUMPTION.
!WIDE VIEWING ANGLE.
!IDEAL FOR BACKLIGHT AND INDICATOR.
!VARIOUS COLORS AND LENS TYPES
AVAILABLE.
!PACKAGE : 2000PCS / REEL.
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.2(0.0079") unless otherwise noted.
3. Lead spacing is measured where the lead emerge package.
4. Specifications are subject to change without notice.
Description
The Bright Red source color devices are made with
Gallium Phosphide Red Light Emitting Diode.
SPEC NO: DSAB2333 REV NO: V.1 DATE: MAY/09/2002 PAGE: 2 OF 4
APPROVED: J.LU CHECKED: Allen Liu DRAWN: D.L.HUANG
Electrical / Optical Characteristics at T)=25°°
°°
°C
Absolute Maximum Ratings at T)=25°°
°°
°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Selection Guide
Note:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
.oNtraP.oNtraP .oNtraP .oNtraP.oNtraPeciDeciD eciD eciDeciDepyTsneLepyTsneL epyTsneL epyTsneLepyTsneL
)dcm(vI)dcm(vI )dcm(vI )dcm(vI)dcm(vI
Am02@
gniweiVgniweiV gniweiV gniweiVgniweiV
elgnA
.niM.niM .niM .niM.niM.pyT.pyT .pyT .pyT.pyT 2/1θ22/1θ2 2/1θ2 2/1θ22/1θ2
CH6123PA)PaG(DERTHGIRBRAELCRETAW8.02.1°021
lobmySlobmyS lobmyS lobmySlobmySretemaraPretemaraP retemaraP retemaraPretemaraPeciveDeciveD eciveD eciveDeciveD.pyT.pyT .pyT .pyT.pyT.xaM.xaM .xaM .xaM.xaMstinUstinU stinU stinUstinUsnoitidnoCtseTsnoitidnoCtseT snoitidnoCtseT snoitidnoCtseTsnoitidnoCtseT
λkaep htgnelevaWkaePdeRthgirB007mnI
F
Am02=
λDhtgnelevaWetanimoDdeRthgirB066mnI
F
Am02=
λ∆ 2/1 htdiw-flaHeniLlartcepSdeRthgirB54mnI
F
Am02=
CecnaticapaCdeRthgirB04FpV
F
zHM1=f;V0=
V
F
egatloVdrawroFdeRthgirB52.25.2V I
F
Am02=
I
R
tnerruCesreveRdeRthgirB01AuV
R
V5=
retemaraPretemaraP retemaraP retemaraPretemaraP deRthgirBdeRthgirB deRthgirB deRthgirBdeRthgirBstinUstinU stinU stinUstinU
noitapissidrewoP 021Wm
tnerruCdrawroFCD 52Am
]1[tnerruCdrawroFkaeP 031Am
egatloVesreveR 5V
erutarepmeTegarotS/gnitarepO 04- °58+oTC °C
SPEC NO: DSAB2333 REV NO: V.1 DATE: MAY/09/2002 PAGE: 3 OF 4
APPROVED: J.LU CHECKED: Allen Liu DRAWN: D.L.HUANG
Bright Red AP3216HC
SPEC NO: DSAB2333 REV NO: V.1 DATE: MAY/09/2002 PAGE: 4 OF 4
APPROVED: J.LU CHECKED: Allen Liu DRAWN: D.L.HUANG
Recommended Soldering Pattern
(Units : mm)
Tape Specifications
(Units : mm)
AP3216HC
SMT Reflow Soldering Instructions
Number of reflow process shall be less than 2 times and cooling
process to normal temperature is required between first and
second soldering process."
