CSM_E3Z-B_DS_E_10_1
1
Photoelectric Sensor with Built-in Amplifier for Detecting Clear, Plastic Bottles
E3Z-B
Ordering Information
Sensors
*1. The Reflector is sold separately.
*2. The specified sensing distance is possible when the E39-R1S is used. Values in parentheses indicate the minimum required distance between the Sensor and the
Reflector.
*3. Install the Sensor so that plastic bottles are at least 500 mm from the Sensor when they pass.
*4. Models with a 0.5-m cable are available. When ordering, specify the cable length by adding the code "0.5M" to the model number (e.g., E3Z-B61 0.5M).
*5. M12 Standard Pre-wired Connector Models are also availavble.
When ordering, add "-M1J 0.3M" to the end of the model number (e.g., E3Z-B62-M1J 0.3M).
The cable is 0.3 m long.
Accessories (Order Separately)
Reflectors
* Values in parentheses indicate the minimum required distance between the Sensor and Reflector.
Mounting Brackets
Refer to E3Z for details.
Sensor I/O Connectors
Refer to E3Z for details.
Sensing method Appearance Connection method Sensing distance Model
NPN output PNP output
Retro-reflective
(without MSR function)
*1
*1Pre-wired (2 m) *2E3Z-B61 2M *4 E3Z-B81 2M *4 *5
Connector (M8, 4 pins) E3Z-B66 E3Z-B86
Pre-wired (2 m) *2
*3
E3Z-B62 2M *4 *5 E3Z-B82 2M *4 *5
Connector (M8, 4 pins) E3Z-B67 E3Z-B87
Red li
g
ht
500 mm (80 mm)
2 m (500 mm)
Type Model Sensing distance (typical) Quantity Remarks
E3Z-B@1/-B@6E3Z-B@2/-B@7
Standard E39-R1S
**
1The E3Z-B is not provided with a
Reflector.
Fog Preventive Coating E39-R1K 1
500 mm (80 mm)
(rated value)
2 m (500 mm)
(rated value)
Reliable Detection of Transparent
Objects, Including Thin-walled Clear,
Plastic Bottles
• Uses OMRON's unique optical system ("Inner View") that can
detect various shapes of clear, plastic bottles.
• Detects a wide range of bottles from 500-ml bottles to 2-l bottles,
and from single bottles to sets of stocked bottles.
• Provides a high degree of protection (IP67), mutual interference
prevention, and EN standard compliance.
Be sure to read Safety Precautions on
page 4.
2
E3Z-B
Ratings and Specifications
*1. Values in parentheses indicate the minimum required distances between the Sensors and Reflectors.
*2. Plastic bottles must pass with the minimum clearance of 500 mm.
Engineering Data (Reference Value)
Sensing method Retro-reflective (without MSR function)
Model NPN output E3Z-B61 E3Z-B66 E3Z-B62 E3Z-B67
Item PNP output E3Z-B81 E3Z-B86 E3Z-B82 E3Z-B87
Sensing distance 500 mm (80 mm) *1 (using E39-R1S) 2 m (500 mm) *1 *2 (using E39-R1S)
Standard sensing object 500-ml (65-mm dia.) transparent round plastic bottles
Light source (wavelength) Red LED (680 mm)
Power supply voltage 12 to 24 VDC±10%, ripple (p-p): 10% max.
Current consumption 30 mA max.
Control output
Load power supply voltage: 26.4 VDC max., Load current: 100 mA max.
Residual voltage: Load current of less than 10 mA: 1 V max.
Load current of 10 to 100 mA: 2 V max.
Open collector output (NPN/PNP depending on model)
Light-ON/Dark-ON selectable
Protection circuits Reversed power supply polarity protection, Output short-circuit protection, Mutual interference prevention, and
Reversed output polarity protection
Response time Operate or reset: 1 ms max.
Sensitivity adjustment One-turn adjuster
Ambient illumination
(Receiver side)
Incandescent lamp: 3,000 lx max.
Sunlight: 10,000 lx max.
Ambient temperature range Operating: −25 to 55°C, Storage:−40 to 70°C (with no icing or condensation)
Ambient humidity range Operating: 35% to 85%, Storage: 35% to 95% (with no condensation)
Insulation resistance 20 MΩ min. at 500 VDC
Dielectric strength 1,000 VAC, 50/60 Hz for 1 min
Vibration resistance Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance Destruction: 500 m/s2 3 times each in X, Y, and Z directions
Degree of protection IP67 (IEC60529)
Connection method Pre-wired cable (standard
length: 2 m and 0.5 m) Connector (M8, 4 pins) Pre-wired cable (standard
length: 2 m and 0.5 m) Connector (M8, 4 pins)
Indicator Operation indicator (orange)
Stability indicator (green)
Weight
(pack-
ed
state)
Pre-wired cable (2 m) Approx. 65 g
Standard Connector Approx. 20 g
Material
Case PBT (polybutylene terephthalate)
Lens Modified polyarylate
Accessories Instruction manual (The Reflector or Mounting Bracket are ordered separately.)
Parallel Operating Range Excess Gain vs. Set Distance
E3Z-B@1/B@6 + E39-R1S
Reflector (Order Separately)
E3Z-B@2/B@7 + E39-R1S
Reflector (Order Separately)
E3Z-B@1/B@6 + E39-R1S
Reflector (Order Separately)
E3Z-B@2/B@7 + E39-R1S
Reflector (Order Separately)
50
40
30
20
10
0
−10
−20
−30
−40
−50
0.5 2.51 1.5 2 3
Distance X (m)
Reflector: E39-R1S
500-mm type
Distance Y (mm)
Y
X
Reflector: E39-R1S
−100
−80
−60
−40
−20
0
20
40
60
80
100
0.5 1 1.5 2 2.5 3 3.5 4 54.
Y
X
Distance X (m)
2-m type
Distance Y (mm)
.5
Excess gain ratio
0.1
1
10
100
0.5 1 1.5 2 2 3
500-mm type
Distance (m)
.5
Excess gain ratio
1
0.1
10
100
0.5 1 1.5 2 2.5 3 3 .5 4 4 5
2-m type
Distance (m)
3
E3Z-B
I/O Circuit Diagrams
NPN Output
PNP Output
Plugs (Sensor I/O Connectors)
Model Operation
mode Timing charts Operation
selector Output circuit
E3Z-B61
E3Z-B62
E3Z-B66
E3Z-B67
Light-ON L side
(LIGHT ON)
Dark-ON D side
(DARK ON)
Incident light
No incident light
ON
OFF
ON
OFF
Operate
Reset
Operation
indicator
(orange)
Output
transistor
Load
(e.g., relay)
(Between brown and black leads)
Retro-reflective Model
Connector Pin Arrangement
Pin 2 is not used.
4
1
24
3
3
1
12 to 24 VDC
Brown
Black
(Control output)
Blue
100mA
max.
Operation
indicator
(orange)
Stability
indicator
(green)
0 V
ZD
Load
(relay)
Photo-
electric
Sensor
Main
Circuit
Incident light
No incident light
ON
OFF
ON
OFF
Operate
Reset
Operation
indicator
(orange)
Output
transistor
Load
(e.g., relay)
(Between brown and black leads)
Model Operation
mode Timing charts Operation
selector Output circuit
E3Z-B81
E3Z-B82
E3Z-B86
E3Z-B87
Light-ON L side
(LIGHT ON)
Dark-ON D side
(DARK ON)
Incident light
No incident light
ON
OFF
ON
OFF
Operate
Reset
Operation
indicator
(orange)
Output
transistor
Load
(e.g., relay)
(Between blue and black leads)
Retro-reflective Model
4
1
24
3
1
3
0 V
ZD
Connector Pin Arrangement
Pin 2 is not used.
12 to 24 VDC
Brown
Black
(Control output)
Blue
100mA
max.
Operation
indicator
(orange)
Stability
indicator
(green)
Load
(relay)
Photo-
electric
Sensor
Main
Circuit
Incident light
No incident light
ON
OFF
ON
OFF
Operate
Reset
Operation
indicator
(orange)
Output
transistor
Load
(e.g., relay)
(Between blue and black leads)
Pin arrangement
Note: Pin 2 is not used.
Classifi-
cation
Wire
color
Connector
pin No.
Application
DC
Brown 1 Power supply
(+V)
White 2 ---
Blue 3 Power supply
(0 V)
Black 4 Output
2
4
1
3
1
2
3
4
XS3F-M421-402-A
XS3F-M421-405-A
XS3F-M422-402-A
XS3F-M422-405-A
Brow
n
White
Blue
Black
Wire colo
r
M8 connector
4
E3Z-B
Safety Precautions
Refer to Warranty and Limitations of Liability.
This product is not designed or rated for ensuring
safety of persons either directly or indirectly.
Do not use it for such purposes.
Do not use the product in atmospheres or environments that exceed
product ratings.
● Designing
Bottles
The Sensor may be unable to achieve stable detection depending on
the shape of the bottles or the position in which the bottles pass. Be
sure to verify stable detection before using the Sensor.
● Mounting
Sensor Mounting
If the Sensor fails to provide stable detection due to the shape of the
bottles or the position in which the bottles pass, adjust the location
and inclination of the Sensor.
Dimensions
Sensors
Retro-reflective Models
Accessories (Order Separately)
Reflectors
Refer to E39-R for details.
Mounting Brackets
Refer to E39-L for details.
Sensor I/O Connectors
Refer to XS2F and XS3F for details.
WARNING Precautions for Correct Use
(Unit: mm)
Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified.
Stability indicator (green)
4-dia. vinyl-insulated round cable with
3 conductors (Conductor cross section:
0.2 mm2 (AWG24); Insulator diameter:
1.1 mm),
Standard length: 2 m
Two, M 3
Sensitivity adjuster
Operation
selector
4.5
11.2
7.5
2.8
25.4
20
20
16.7
3
Receiver
Lens 7 dia.
Emitter
Lens 7 dia.
10.8
10.8
2.1
31
31
Operation
Indicator (orange)
8
Pre-wired Models
E3Z-B61
E3Z-B81
E3Z-B62
E3Z-B82
4.5
11.2
7.5
M8 connector
Sensitivity adjuster
Operation
selector
9.75
Two, M 3
Operation
Indicator (orange)
2.8
25.4
20
20
16.7
3
Receiver
Lens 7 dia.
Emitter
Lens 7 dia.
10.8
10.8
10.4
2.1
31
31
Stability indicator (green)
8
Connector Models
E3Z-B66
E3Z-B86
E3Z-B67
E3Z-B87
M8 Pre-wired Connector (E3Z-T@@K-M3J)
M12 Pre-wired Connector (E3Z-@@@-M1J)
4 dia. vinyl-insulated round cable
with 3 conductors
Standard length: 0.3 m
M12×1
1
3
2
4
4 dia. vinyl-insulated round cable
with 3 conductors
Standard length: 0.3 m
M8
2 4
1 3
Termi-
nal No.
Specifi-
cations
1+V
2 ---
30 V
4 Output
Terms and Conditions Agreement
Read and understand this catalog.
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you
have any questions or comments.
Warranties.
(a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship
for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron
disclaims all other warranties, express or implied.
(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT
NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER
ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE
PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE.
Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the
Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at
Omron’s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or
replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount
equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty,
repair, indemnity or any other claims or expenses regarding the Products unless Omron’s analysis confirms that the Products
were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate
modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall
not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or
electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice,
recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above
warranty.
See http://www.omron.com/global/ or contact your Omron representative for published information.
Limitation on Liability; Etc.
OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS,
WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY.
Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted.
Suitability of Use.
Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the
combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable
third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself
is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine,
system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product
with respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE
QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS,
AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE
OVERALL EQUIPMENT OR SYSTEM.
Programmable Products.
Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence
thereof.
Performance Data.
Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining
suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate
it to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability.
Change in Specifications.
Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our
practice to change part numbers when published ratings or features are changed, or when significant construction changes are
made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers
may be assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at
any time to confirm actual specifications of purchased Product.
Errors and Omissions.
Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is
assumed for clerical, typographical or proofreading errors or omissions.
2013.12
In the interest of product improvement, specifications are subject to change without notice.
OMRON Corporation
Industrial Automation Company
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2013 All Right Reserved.
